The only man on KZitem who gets right to the point. Thank you
@markstylezproductions9095
3 жыл бұрын
Thanks for the super straight forward honest review
@joellouisfire
3 жыл бұрын
Glad to see you back; love your videos!
@AlexLog314
2 жыл бұрын
That was actually brilliant! Well done.
@lukegenesis
2 жыл бұрын
Thanks for this review ! Super straightforward no BS 👌🙌
@williamcenote8179
3 жыл бұрын
Great video man! Thanks for making it
@EposVox
3 жыл бұрын
Great review!
@HottoolReview
2 ай бұрын
Great video!
@kevh1779
2 жыл бұрын
This is the same sort of kit Industrial Light and Magic used for the Star wars films but for the home user. Now that is cool !
@cineformat6298
3 жыл бұрын
I didnt see your videos for a long time, happy to see you back, will you proceed sharing your experience with blackmagic cameras and why you're not changing your 4k to 6k?
@myvideoversion
3 жыл бұрын
Life has been way crazy for me so I had to take a break. It is going to be a lot of hit or miss for awhile. As far as upgrading to the 6k I just don't see a need. The 4k does what I need and I don't see the 6k being that much better so I will wait till the next generation pocket camera before I switch it out
@Chromedbustop
3 жыл бұрын
I didn't know Asmongold did reviews of camera gear! But being serious, this was really helpful. :)
@vee8294
Жыл бұрын
Hello can you explain or show how you edit stop motion with edelkrone jib one
@snibushds
2 жыл бұрын
Where is the list of Edelkrone products you were using and talking about?
@thomaswindfeld728
Жыл бұрын
Hey there. Thanx for the vid. How fast can it actually move? Everybody shows the silky smoooooth shots, and thats cool, but sometimes you want fast movement . Thanx again.
@lukemccarthy9116
3 жыл бұрын
I can see shaking on the iphone shot at 10:35. I was interested in the jib one, but there I would say its far from perfectly smooth and completely unacceptable for product videos.
@iMasterTeam
6 күн бұрын
Which tripod is this ? I need for edelkrone slider
@snibushds
2 жыл бұрын
Great explanation of the equipment. Very helpful. I am considering buying. I like especially the target mode. I assume it can target people.
@hoodistry
2 жыл бұрын
Good Stuff.. I love it!!!!!
@X300ish
3 жыл бұрын
This was insightful and just goddamn subtly hilarious ... subbed and bell turned on 👌👍 I’d love to see you using this for a project🤞
@skymakai
11 ай бұрын
You need the Vision module to do tracking, right?
@jkpinpdx
2 жыл бұрын
just ordered the V2 version of this Jib and opted for the PanPro + Vision module... My wallet said OUCH 3 times!!! 🤪
@lymerance
11 ай бұрын
It looks wobbling?
@williamhuang5329
2 жыл бұрын
Hanzhen harmonic drive gear, strain wave reducer, robot joint , over 30 years experience
@chriswhitaker9720
2 жыл бұрын
Excellent Review! with the right lens do you think this could be used for a church setup for more dynamic onstage shots with both manual operation and target mode ?
@henrikandersen4777
2 жыл бұрын
what do u mean product shooting what about solo indie film making for some crazy short shots whit stellar movments ind and out or whit ex probe lense and rotating?? + stop and go and blender background work VFX? i know its exp but there another option out there just released cheaper prob not same quality but i bet u can make it for if your a solo indie guy .
@BBWinner48
3 жыл бұрын
Great review, question on target mode, "Do I need the Laser attachment for this "?..
@LivingTech
2 жыл бұрын
Thanks for this great review. With focus by wire type lenses, the focus module would be useless, is that right?
@adsertheblade
3 жыл бұрын
Hia. Have you tried the slider style shot but with the camera pointing backwards so you get a more natural outward curve around the sujbect? Obviously when you point it the eight way it gets closer to the subject, as does a normal slider I guess, but backwards it seems like the outward curve could actually keep the subject at the same distance throughout the horizontal movement. I'd be interested to see if it works. I'm sure you can angle everything so the jib doesn't get in the way
@chrisdumas4352
3 жыл бұрын
How did you get all three items to pair together? My Edelkrone app will not let me do that. The HeadPlus is listed as a separate paired group.
@robinkitchin
3 жыл бұрын
Hi Guys. Great video. Just bought this setup and similarly don't seem to be able to pair head plus and pan Pro at same time - did you have a solution please? Cheers
@warmsunset2009
3 жыл бұрын
Great video. What tripod are you using for the Jeb1? I don’t see it under gears. Thanks
@JJ-mm5nk
3 жыл бұрын
Such a fantastic review man! Thank you for taking the time to do this. I wasn't aware of this system and this seems like an absolute game changer for product shots! I'm trying to price the system online, but am confused on all the components that you're using. How much did the total kit set you back?
@myvideoversion
3 жыл бұрын
I won the jobone buddle in a contest. The panpro I bought. I priced it online and it looks like total cost of the bundle is $3517. It's not cheap but is super versatile
@VictorWinPerspective
2 жыл бұрын
Thanks for making this video! I have a quick question. If I was filming by myself for hours, can I automate the movement for hours? Thanks man!
@superbmediacontentcreator
8 ай бұрын
Did you find a need for the laser for your target use?
@myvideoversion
8 ай бұрын
No not really
@superbmediacontentcreator
8 ай бұрын
@@myvideoversion Thanks, that saves me $200.
@majormauser
5 ай бұрын
what are you using the pan module for doesn't the jib one pan on its own? I guess you do.
@myvideoversion
3 ай бұрын
No it doesn't
@FergVision
Жыл бұрын
Will this let you do a straight “dolly in and up” type shot or is it always have to go slightly off axis?
@nikosprince7769
3 жыл бұрын
Hello, Amazing work! Who tripod do you use?
@ms.7584
3 жыл бұрын
Thanks for fine video. Do your lenses you use with focus pull have fast stop on focus wheel? I have same setup but never used my focus motor. I now want to get my setup running with focus pull. But I only got 1 lens with afst stop on focus ring.
@austinscherzberg4569
3 жыл бұрын
What’s the fastest it can go through each point? I’d love to get this if It can go through each movement relatively fast
@kbstrong9775
2 жыл бұрын
have you ever experienced jitter or extreme shaking with your jibone? I purchased the jibone + Head Pro + Pan Pro - spent $2700 and the device is jittery. the footage is unusable and I need to get in contact with them because at this point I just have a $2700 hunk of metal that angers me everytime I look at it.
@AdamSmith-zq5sr
2 жыл бұрын
Is there any height restrictions with the tripod when using the jib one and pan pro?
@g0raku
2 жыл бұрын
You’re too good to share
@Pathfinder_tua
3 жыл бұрын
Fantastic review just what i was looking for. I got this set up yesterday and enjoying it a lot. Would u mind sharing how u did the scene at 4:45?
@myvideoversion
3 жыл бұрын
I simply shot the same move over and over and removed on item at a time. It was a lot of shots but that is how I did it
@Pathfinder_tua
3 жыл бұрын
@@myvideoversion oh really? Then masked it in? Was the jibone really that accurate in its repeated moves that allowed you to do that? Cant wait to try it
@myvideoversion
3 жыл бұрын
@@Pathfinder_tua yup it was pretty simple
@Pathfinder_tua
3 жыл бұрын
Hey i managed to do the effect of things appearing it looks so cool. How did u do the 7:19. Please do a tutorial!!!
@myvideoversion
3 жыл бұрын
I am planning on doing one. That video isnt fully released yet so I'll need to wait before doing that
@RedEyeJedigaming
3 жыл бұрын
How come pan pro doesn't move when the head plus moves
@myvideoversion
3 жыл бұрын
When you pair it in this configuration it just know
@MilleaccendiniLive
3 жыл бұрын
ottimo!
@Pathfinder_tua
3 жыл бұрын
Also im finding i cant do target mode with underswung. It starts acting crazy. Any ideas?
@myvideoversion
3 жыл бұрын
Not sure. I know it acts crazy if you switch it and don't redo the full calibration. Turn it off and set it all up again
@socc3r7k1ng
3 жыл бұрын
Did you need the laser for target mode?
@myvideoversion
3 жыл бұрын
No you do not
@socc3r7k1ng
3 жыл бұрын
@@myvideoversion I assume the laser module just adds more accuracy? I think I tried target mode on mine and I didn't notice it focusing during target mode, maybe that's what the laser adds? I think I get it now. The target mode works because it's going to lock off one of the axis' so that it's always pointing in that direction, with the laser, you get tracking which could adjust focus, the current target mode is probably just going to be static focus.
@myvideoversion
3 жыл бұрын
@@socc3r7k1ng you have to make sure your lens is acutely calibrated for it to truly work right
@socc3r7k1ng
3 жыл бұрын
@@myvideoversion yeah I'll mess around with it. I have done the calibration stuff before. I'm just not sure without the laser how it's going to judge distance, it must take the focus point and location from your target frame and then just adjust from there, I can see it working in that manner. Thanks!
@AaronTheVideoGuy
9 ай бұрын
Comment 1
@AaronTheVideoGuy
9 ай бұрын
Comment 2
@AaronTheVideoGuy
9 ай бұрын
Can’t hit dislike😮😢😂
@thehechtmans6805
10 ай бұрын
comment
@AaronTheVideoGuy
9 ай бұрын
😂😂😂
@3rdisland477
3 жыл бұрын
I was so sorry to buy this shit product, it looses the pre programed position during operations
@sam78882
5 ай бұрын
Man sorry to say it’s the biggest junk I ever bought wasted my money ! I have spend thousands of dollars where I could have bought much better and lighter weight in quarter of the price of junky Edelkrone it’s just a waste of money ! I fought if people will buy there product after the first time you buy an item that’s way over priced real junk metal made in Turkey 🦃. I am trying to sell all my Edelkrone on eBay for 80% off all new in mont condition and no one is buying or looking at it and what you are talking about is there largest junk they ever made you need a lift to carry with you it’s made so heavy for nothing and now they came with a Tripod for Thousands of Dollars thinking they are Sony or Oben or any big names instead of selling it for $150.00 as there are tons of quality Tripods for $150-400$ Edelkrone soon you will go out of business trust me .
@myvideoversion
5 ай бұрын
I’m very interested when you say you have found higher quality equipment for quarter the price can you give some examples because I’m always interested in everything that is out there. And that sucks that you’ve had such a sucky experience with Edelkrone. I’ve had my fair share of ups and downs with them but I feel they are constantly improving.
@sam78882
5 ай бұрын
@@myvideoversion I have on eBay my Edelkrone for sale some of it I am going to put it all jiggly one I have for $499.00 could not use it still in new condition and all my other items I will list for real cheap to get tidy of them
Пікірлер: 72