I just received my JibOne last Friday. I am loving it though I found out the hard way that you must be sure that each counterweight is fully screwed in before you add another. I did not and two of the weights broke free and fell to the floor breaking one of the screws. Fortunately my toes were not under the weights at that time. Great review that felt like you provided balance of the good and the bad. I am really impressed you gave Edelkrone the opportunity to respond. BTW - Very good onscreen presence, I look forward to more content from you.
@ubiVidz
4 жыл бұрын
Thank you for the kind words Jason! I have to tell you that while we were filming this I had 3 of the weights screwed together and then attached them to the jib and forgot to screw them in ... a few minutes later it sounded like a bomb went off when they hit the floor. Oops. LOL It happens.
@TomAntos
4 жыл бұрын
Great review Craig! Nice use of humor. Plus those epic shots of toilet paper 😍
@ubiVidz
4 жыл бұрын
Thank you so so so much Tom!!! It means a lot coming from you!!! To anyone reading this; go subscribe to Tom's channel (if you aren't already) and see how a pro does it. You WON'T be disappointed!
@BlackFiance
4 жыл бұрын
AGREE
@GameMusicCollective
4 жыл бұрын
Love the way of this video is done! Great Job man!!
@ubiVidz
4 жыл бұрын
Thank you
@heartandsoulfilms7816
4 жыл бұрын
This channel is gonna blow up. It's like Lewis Black is a camera guy.
@ubiVidz
3 жыл бұрын
As a fan of Lewis Black .. this is my favorite comment
@LukeMacNeil
4 жыл бұрын
Great video. I especially liked the way you peppered the manufacturer’s responses in. That was dope. I liked that you changed the bg to red when there were updates. Great info too, probably will grab one of these. Looks super useful.
@bluetickhound16
4 жыл бұрын
Halfway through this video I had to pause it so I could subscribe... I celebrated by going to the bathroom and dropping a big ‘ole deuce in your honor! Congrats on a strong, STRONG first video here on YT!
@LBJMediaLLC
4 жыл бұрын
Love the new channel! Great review!
@ubiVidz
4 жыл бұрын
Thanks Luis! Come play with the toys when this is all over!
@Bulsie28
4 жыл бұрын
I’ve never seen toilet paper shot so elegantly! 👌 great video man!
@ubiVidz
4 жыл бұрын
LOL Thanks Kenny!
@DavidThorpeMFT
4 жыл бұрын
I have a JibOne - Good stuff, I learned a lot. A lot of work involved in making this - thanks!
@ubiVidz
4 жыл бұрын
Thank you David. If were being honest, we had NO IDEA how much work would go into this when we set out to start and it took waaaay longer than we thought it might, but in the end we were glad we took our time because we really want our videos to be HONEST and FAIR.
@BlackFiance
4 жыл бұрын
So excited about this new channel!
@ubiVidz
4 жыл бұрын
Thank you Amresse!!
@BrannonNod
4 жыл бұрын
Congratulations On your 1st Video...Well done My Fellow KZitemrian...Let the Marathon Begin 👍😜❤
@BlackBearForge
4 жыл бұрын
Great review, I just ordered the JibONE to use with my two HeadOne units
@easy-votreagencedecommunic3499
4 жыл бұрын
This is a great job having answers from Edelkrone during your video give a better idea of the product and a chance to the company to bring more details. Thank you very much for your video. that's exactly what I was looking for and I enjoyed watching it. I have just bought one. Thanks again from France and take care of you during this sad period.
@ivancuetowicq
3 жыл бұрын
I cant believe I watched the whole thing.. WAIT
@ubiVidz
3 жыл бұрын
WAIT .. lol
@PatJones82
4 жыл бұрын
THE BEST review of this product... and I've watched A LOT of them. Well done sir.
@WataGuy
3 жыл бұрын
Both informative AND dare I say... entertaining. Well done and congrats on the channel! May the Edelkrone be with you.
@wojciechholysz9370
3 жыл бұрын
Man, you should keep those videos coming - practical, informative and entertaining!
@lawrenceatienza
4 жыл бұрын
The best how to use edelkrone jibone video to date. Thank you!
@ubiVidz
4 жыл бұрын
Thank you Law
@OzTheGodofficial
3 жыл бұрын
It really is!!!
@jasemal7238
4 жыл бұрын
Best product review on KZitem. Thank you sir. Very helpful.
@donhendricks3190
4 жыл бұрын
Dude. Great Vid. Like you, I chose to take the plunge and I bought the entire Slider System - HeadPLUS etc...and...when the JibONE was announced, my resistance was, as they say, futile. So, I have the entire system now. Honestly, as I began learning the particulars, I noted some unfavorable comments on FB (shocker, right?). But, just as you demonstrated, everything that was an "issue" for the complainers (and, temporarily for me) is already addressed by edelkrone. Perfect system? No. No such thing as a perfect system - by anyone. But, having the ability to function in my element (uh, one man operation) this system is as close to perfect as I've found. I do agree with you - the one BIG thing I truly NEED is a Master On/Off Switch in the App. NEED it. I've a feeling, however, that in order for that to happen, the hardware will require an upgrade. We shall see what the guys at edelkrone create for us. So, great Vid - YOU are awesome - and I'm your newest Subscriber. Looking forward to you next Vid. Now, back to work on my #SafeAtHome work. Later.
@ubiVidz
4 жыл бұрын
Thank you Don! I agree with the On/Off switches. I don't know for certain but I have a strong feeling there isn't a way to implement that feature without some kind of hardware modification :(
@Avidcomp
3 жыл бұрын
I'm so glad you brought up the load capacity on the iFootage. I have the same jib, and I could not get a straight answer from them as to the load. You obviously thought like I did that the jib could be loaded with up to 33lb. I think the legs create a factor in the operation. My legs have a 45lb capacity (rec safe). I also think the stability between having the rear support being loaded with less weight at a longer reach compared to a much heavier weight on a short reach. I decided that they must be talking about the force applied to the bearings on their own product which weighs very little must be included. And that the 33lbs including the weight front and rear is the capacity maximum. Obviously if you fully extend the rear you can get away with less weight to counterbalance. Finally I decided that that thought was my utmost maximum (so I should always be a little under) and carefully setup and try the feel of it for a while, examining it in slow operation. Under those circumstances I don't believe it will break, but still I aim for approx 80% capacity (
@chrisxhwang
3 жыл бұрын
I had the same wobble/stuttering issue. Your video helped me walk through that issue. Thanks for posting this video!
@savillecreations8046
3 жыл бұрын
Great review. I have most of the other Edelkrone gear and have been debating purchasing the JibONE.
@djnaydee
4 жыл бұрын
Great humor, thanks for the review bud
@vrministries
8 күн бұрын
This was most helpful. I want to buy this for my church. I wish they had a remote control though. Think you can talk them into it. If it’s a stationary system for studios, event hall and church, a joystick remote control would be outstanding.
@DeadBrokeBBQ
3 жыл бұрын
Great video bro!! With me running multiple cameras for my crappy content I really have been looking at getting other options to get different angles to liven up my garbage and this video certainly has me starting to this could be an option for my studio. Great review and I am glad I found this video!! Ya got a sub and i hope you continue to post more camera gear for nerds like me content!!
@RealTerrainHobbies
4 жыл бұрын
Great review. Thanks! Wondering about picking this system up for my channel. I do a lot of small scale modelling and I can see it really adding a lot to my videos and giving it a jump in quality.
@thejointshorts
3 жыл бұрын
I got all of my doubts clear regarding the product in this video👍 Great efforts for making this video 💜 Keep it up 🙌
@PescesKitchen
Жыл бұрын
Just purchased my setup so it’s currently in transition mode, but with that said, I’ve been scouring the KZitem platform for information about this job to prepare it for my production studio and there’s two problems. There’s not enough content on it or how to use it and the content out there is really subpar. Your video is the most information I’ve taken away from this unit and I’m even more excited to use it, so thank you. You got my approval, my subscription and my 👍 !!!!
@TheManateeParty
2 жыл бұрын
Thanks so much for doing an actual review and not just sucking off Edelkrone. Really helpful, man. Wish you would do more videos.
@WHITELIONNYC
4 жыл бұрын
I have a pair of Kessler Crane jibs (4' & 8'). They are very well built but the JibOne is a lifesaver for a one man crew like me. It's like the Tesla of jibs!
@ubiVidz
4 жыл бұрын
Agreed. I just wish it was a LITTLE longer.
@WHITELIONNYC
4 жыл бұрын
@@ubiVidz edelkrone has short and long versions of sliders. Since this is totally new product they probably wanted to test the market for demand. If the numbers are good it's very likely they will release a "PRO" version that is longer and higher payload.
@jakecolefilms
3 жыл бұрын
Loved this! Hope you come back for more reviews!
@chrisxhwang
3 жыл бұрын
Man, this is a great product deep dive video - thanks for sharing! I've been considering the jib one; I think this video put's my decision over the top!
@urkuvideos
2 жыл бұрын
I have one, if you are okay with the stutter once in a while even when its balance correctly , this is a great tool
@cmckenna
3 жыл бұрын
Amazing content. Best review. It's such a shame that you're probably doing too much professional work to do more of these videos, but how amazing that you've generated so much buzz from one video. Thank you for spending so much time doing such a thorough review. I've been watching Rhino Arc II videos and Jib One videos all night long, and this video made me really consider a JibOne as perhaps the priority. I'd be interested in you doing a review of their follow focus system, as well as the head plus and an update with the remote and PanPro included. Your jokes were amazing, and you made me laugh so much with the toilet roll video. Thank you for sharing! Hope you're safe and well too.
@melchiorsantjes8370
4 жыл бұрын
Really fun to watch. Keep up the good work
@ubiVidz
4 жыл бұрын
Thank you, I sincerly appreciate it!
@Treehousedreamsfilms
3 жыл бұрын
Excellent video! I just bought the entire system and you helped answer mom important questions. Not to mention you're damn funny and entertaining. Kept me engaged the entire time. That's HUGE to me. Best of luck with your work!
@TheFriendlyReviewer
3 жыл бұрын
Solid review - Thanks!
@StrangeNormal
2 жыл бұрын
how do you only have 393 subscribers? this is great quality stuff. love your humor
@anthonydempsey9985
2 жыл бұрын
So funny and very informative! Richest humour and info combo with speedy, concise delivery. Cutting edge really. Thanks so much :D
@TimurAbi
4 жыл бұрын
dude I just bought pretty much everything edelkrone offers xD Really loved your video and subscribed! Regards from germany
@fsb5370
4 жыл бұрын
I have a bunch of Edelkrone stuff. Not the HeadPlus but two HeadOnes with the tilt kit I use the sliders, I have the small one and the SliderPlus You have me cracking up with the Slam the -90 angle I am not into the JibOne need at this point. This was the best look at it from the other videos I have seen.
@ubiVidz
4 жыл бұрын
FSB: Thank you so much for the kind words
@joonasnieminenfi
4 жыл бұрын
11:27 Problem solved: Use a small raiser plate under the HeadPLUS. This way it goes over the JibONE and doesn't hit it.
@urkuvideos
2 жыл бұрын
thumbs up -- there is always a way!
@AndreAmirLive
3 жыл бұрын
Nice thorough and entertaining review.
@MsRobstar
4 жыл бұрын
Love this guy😂‼️
@tobydz
3 жыл бұрын
They just released the panning module that'll add that sweep we all love. BTW really enjoyed your style of vid... *subscribed*
@XanderEwald
4 жыл бұрын
Great video, you’re really good at this!
@ubiVidz
4 жыл бұрын
Thank you :)
@MrEchyballs
3 жыл бұрын
the most useful video I have watched . tyvm .like ur video very much
@TravelingCircus
4 жыл бұрын
loved the video!
@snibushds
2 жыл бұрын
Well done video - very informative and humorous. It is clear you invested a lot of time in producing this video. Thank you. (Currently in Hong Kong)
@DayPhotography
3 жыл бұрын
If it turns out this guy is related to Lewis Black I wouldnt be surprised. Great video!
@Carlito_MD
4 жыл бұрын
Came to watch your video (from IG post) to compare experiences with the same setup. Your edelkrone replies answered a few of my questions. Thank you for that! Although had tried the "do not touch" knob and it didn't solve my stuttering issue. The only other question I still have is how I should be balancing the jib when using the headONE. Should be balancing with the head facing forward? because as it rotates it stretches further than when it was balanced and it worsens my stuttering. The plate where you screw the headONE (or camera) has a bit of leeway side to side so where do I set the headONE (been using it in the middle). Anyways, most questions were surrounding that. Also, I mostly use it underslung, so I thought -90 degrees was for that but nope. it's literally the same. setting -90 just made my app lower the jib when moving the knob to raise the jib. So I guess directions are the same if used underslung. My only other complaint was that it moves way too fast for my taste. I have to set speed down to 20% to get a smooth shot. Dude you're a natural at these videos for it being your first. Keep it up. Great video!
@ubiVidz
4 жыл бұрын
Carlito! First.. Thanks for Watching!!! (and being our first comment!). To give you my best advice; I've been balancing the JibONE with the HeadPlus on it facing forward (not extended) and that seems to work fine for me 99% of the time. I also screw my HeadPlus into the JibONE in the dead center because my thinking is that the HeadPlus had to be balanced so keeping it centered should keep it balanced better. And lastly .. thank you so very very much for the kind words! With this being our first video we are ecstatic to hear some positive feedback! Thank you!!
@Carlito_MD
4 жыл бұрын
ubiVidz of course brother! Keep it up! Oh and I meant headPLUS in my comment but i suspect you understood what i meant. Maybe.
@skillfulwebdesign
4 ай бұрын
This video is a lifesaver!
@EmilianBalanFilmandPhotography
3 жыл бұрын
Great video, please make more content for us !!
@JamesSaine
3 жыл бұрын
Great review and you are hilarious!
@igor_aka_insane
3 жыл бұрын
Love your Style - Keep Going - Good Humor :D
@DatrysiadMedia
4 жыл бұрын
Nice video, been looking at the jib one, wont be getting it for a while but I do like the slider and head one units I got. Love that they are modular. Just combine my headone with a tilta wireless follow focus and works a treat. One of the reasons why I enjoy using edelkrone is because I don't just need to use it for the intended application Just subbed
@ubiVidz
4 жыл бұрын
Thanks Byron. We truly appreciate the support and we're working on getting some new content up asap
@DatrysiadMedia
4 жыл бұрын
@@ubiVidz no problem at all I'm no stranger to how much work goes into making these things
@SymonSaysTV
3 жыл бұрын
That was nice and funny. Wait! We have a message from Symon. It says; thanks! ✌️
@domballsproductions
3 жыл бұрын
Can you recommend any tripods to go with your setup?
@ubiVidz
3 жыл бұрын
I personally use and have been VERY happy with these amzn.to/3t4lIVy they hold the weight for both the JibONE and Large slider without any problems
@chrisdemiris8295
3 жыл бұрын
Great content! Really enjoyed it. Subed
@dylanfgarrison
3 жыл бұрын
Amazing review and video all around. I’m so bummed this seems to have been a one off review. I think I’d watch pretty much anything you want to talk about. Awesome style. Felt like I was watching Lewis Black review camera gear :).
@jimlutz6691
3 жыл бұрын
I'm at 17:00 minutes now, this is the funniest product review I have ever seen. Good job - What was your total purcha$e price??
@mariusserbann
4 жыл бұрын
Thanks for the awesome review! Just got my JibOne and have trouble using the laser properly (the camera always goes a little higher than my laser target)...can you please make a tutorial on how you're using the laser together with the jib? Thanks!!
@ubiVidz
4 жыл бұрын
Marius, while I've used the laser module several times with the slider, I have yet to be in a situation where I've needed to use it with the jibONE. After reading your comment I might try to do a test so I don't walk into a client project expecting it work a certain way and learning the hard way that it doesn't. ... On a related note I'm in the middle of trying to get the laser module to work with the Laowa 24mm Probe Lens and waiting for a reply from edelkrone support. So maybe at some point we'll do a whole video about the laser+focus module
@MSVRVisualTravel
4 жыл бұрын
Great video. Just exchanged the slider for the jibone. I wasn't happy with the balancing without any counterweight option for the motorized slider and the time it took to set up. I would have loved hearing the Rhino rant. :-)
@ubiVidz
4 жыл бұрын
LOL The Rhino Rant was reeeeally long and made me sound like a cranky old man (with valid points).
@MSVRVisualTravel
4 жыл бұрын
@@ubiVidz Nothing wrong with that! lol
@PleasantKenobi
2 жыл бұрын
Video was great. Do more.
@FamilyofTech
3 жыл бұрын
Will you be getting the new pan pro and use it with the jib one ??? Not sure how much it would add to the jib one movement
@ubiVidz
3 жыл бұрын
Yup. Ordered it on the 16th and wasn't expecting it to ship for a while but I got an email that it shipped on the 19th ... I'm VERY curious to try it out! Since this review I also switched to a much heavier camera system that I still haven't had time to test on the JibONE so I thinking once the Pan PRO gets here I might see how well it works with the new setup and the new remote (I REALLY REALLY love the remote .. use it with the slider often)
@FamilyofTech
3 жыл бұрын
@@ubiVidz I have the remote as well. Just wondering what type of movement the pan pro will add to the jib one. Cant wait for you to make a video about it!
@WHITELIONNYC
4 жыл бұрын
Very good objective review. I hate the app. I love there is a new remote control that does the basic functions.
@mustros
4 жыл бұрын
Mann... you just make our neighbors company jealous... lol
@ScottBalkum
3 жыл бұрын
Nice review. Kisses...
@bobbygindenver7208
2 жыл бұрын
Yes sr. Brother you rock! great information, your innertanning along with clear cut video, I'll be watching for sure, !
@TW-iu9zy
4 жыл бұрын
... very good review. 👍🏻 how susceptible to errors is the laser module? can it work perfectly in interviews? or does the setup take too long? is it worth buying?
@ubiVidz
4 жыл бұрын
Thank you. Personally I love the laser module for product stuff. It's also the FASTEST way to set up a shot. At first I wasn't sure it was making that big of a difference in my shots but I did a few tests and it's like night and day between manual and target mode with the laser. But I don't think it's really suited for an interview. I haven't tried it actually. I would think you'd have to shoot the laser at the subjects eye and that isn't something I would recommend.
@TW-iu9zy
4 жыл бұрын
ubiVidz ... thx. That’s right. Eyes are not the best subjects. 😉
@AndreAmirLive
2 жыл бұрын
Love your cool sound effects.
@TheHamboneGroup
Жыл бұрын
Do you have any tips on attaching the headplus pro to the jibone? I tighten the hell out of that rod, but it keeps slipping. I'm just under the max payload weight too. It's funny, edelkrone is like amazing and so difficult at the same time. Thanks for your do not touch knob tip. I was getting jitters and that's how I found your video.
@Kelv_Nganga
2 жыл бұрын
lmao 1:30 you got me laughing like a crazy maniac
@michaeldande
4 жыл бұрын
good so how do u reset, say am shooting a music orchestra concert so on the first half of the show I set pause 1 n 2 then loop, second half I decided to change positions do u have to switch off n reset of u just erase n proceed
@ubiFire
4 жыл бұрын
You simply delete your poses and proceed to make new ones.
@erikgordon4804
4 жыл бұрын
Some very useful information. It's just a matter of personal taste, and my taste probably is not mainstream: the silly stuff (like "Where's Waldo" and "I held the poop in to entertain you") distracts from the quality of the video. It strikes me as an older guy doing Potato Jet as he might have been in middle school. Nobody but Gene can do Potato Jet. Still, your information is some of the most useful I've seen on the jib. So, thumbs up from me.
@BrannonNod
4 жыл бұрын
Eric I have to disagree with you..I didnt get a Potato jet vibe I got hey this guys spicing up his video..I like the more down to earth Reviews... But hey after you look me up you'll understand my Point...lol
@erikgordon4804
4 жыл бұрын
@@BrannonNod Hey Brannon. I guess it's just a matter of taste, and maybe I'm getting old. The "Where's Waldo" stuff doesn't entertain me. ubiVidz might have slow going building his subscriber number if he positions himself to compete in the entertainment-education space against the likes of Potato Jet, who is cleverer, has a good straight man (Sam), and makes me laugh a lot even though I think he sometimes goes on too long over too little, as in his love for his Tesla. Funny guy who would be funnier with a different guy editing. I checked out your review of the Liberty 2 Pros vs the Jabra 75ts. Nice! I feel as if I know a lot about what makes them different. Kudos on your opening b-roll. Making ear buds look epic is not easy, and your knife twirl speed ramp was cool.
@BrannonNod
4 жыл бұрын
@@erikgordon4804 Thanx Eric hope to have you Aboard my Following Family...I get mixed feelings on my reviews as well but the majority seem to dig it..As far as to old I'm 50😜
@erikgordon4804
4 жыл бұрын
@@BrannonNod Brannon, I get it. Everyone who creates something and puts it out there gets mixed reviews and has mixed feelings about the reviews they get. Unless you are hosting a daytime game show, I guess you just have to hope you are doing work that is good for some decent number of people.
@thomaswatzold8423
4 жыл бұрын
cooles video! nice greatings from germany :-)
@limitxweb
Жыл бұрын
Very funny made and full of information, thanks a lot for your video. So I have a question related to the Tension knob. When balancing the jibone, the knob has to be loosen as loose as it goes. But what do you do with the tension knob, when jibone is balanced and ready to go? Do you tighten the Tension knob or do you leave it loosen as you loosen it before for balancing the jib?
@MrPhilbautista
3 жыл бұрын
Just found your channel and I'm hooked. Liked & subbed, but now I'm curious about that Rhino rant. Will we ever get to hear it?
@videoninjaproductions9003
4 жыл бұрын
i don't even have one of these... nor during this world collapse, can i think about purchasing this... but at 3:21, you had me hooked to stay tuned to find out what that f*ckin knob does!
@ubiVidz
4 жыл бұрын
LOL Stay tuned for our full reply to your comment ... coming soon!
@adsertheblade
3 жыл бұрын
Hia. Have you tried the slider style shot but with the camera pointing backwards so you get a more natural outward curve around the sujbect? Obviously when you point it the eight way it gets closer to the subject, as does a normal slider I guess, but backwards it seems like the outward curve could actually keep the subject at the same distance throughout the horizontal movement. I'd be interested to see if it works. I'm sure you can angle everything so the jib doesn't get in the way
@marcostechtv
2 жыл бұрын
Good video 😀🤘🏻
@lauddp1150
4 жыл бұрын
Can you give us an brief about what you have against rhino? lol cause the arc 2 is looking like a great alternative
@ubiVidz
4 жыл бұрын
Briefly: The Rhino system isn't modular and feels pricey for something so basic. The ARC II has been out for about a year and STILL no Android app to spite saying they were working on one before it launched. They never added a third axis to the Evo system and instead made the ARC II which left the EVO customers with no upgrade option. Lastly, I personally find Rhino's marketing very disingenuous.
@lauddp1150
4 жыл бұрын
@@ubiVidz I appreciate the response! Thank you for sharing your thoughts because I'm looking for something like the arc ii or the jibone but I've heard other people echo the same concerns you had with rhino. I've also heard (and seen) some really bad jitters come from Edelkrone products. I heard nightmare stories about the Edelkrone app too because it will fail to connect often + firmware updates/ads popping up that make the setup process slower. What really tickles my spider senses is how almost every review is sponsored by Edelkrone and a lot of the content creators got the product for free and are masking the beginning and end of shots by either taking them out completely or adding a fast transition (where the jitter supposedly gets really bad). I have also heard that the focus module is essentially garbage, especially for lens with soft stops like the 18-35mm sigma art that I use, so it leaves me wondering how i'm going to pull focus. I don't want to sound like I'm complaining or knocking Edelkrone because I'm not. I'm intrigued by their products and I'm tempted to get the jibone despite the shortcomings. I'm just stating the negative things I've heard so far. But you seem to be an honest reviewer and I'd love to get your take on all that stuff now that you've had extensive time with the product. Has the app frustrated you like it has many others (especially illustrated in Gerald undone's review of the headplus)? Are fixing the jitters really as easy as turning the do not touch knob? Is the slight wobble at the end of every set frame rate as bad as people are saying making it hard to use it to go from one subject to another? P.S Apologies for all the follow up questions! I just feel like you would be somebody who can answer these questions HONESTLY and help me decide whether or not to invest thousands into the ecosystem
@ubiVidz
4 жыл бұрын
@@lauddp1150 I'm in the middle of a shoot right now so I have to be quick (ironically, actually using the JibONE, HeadPlus, Focus Module and the Sigma 18-35 Art lens). When I mentioned disingenuous marketing, I was speaking very much towards the "Gerald Undone" video (among some others). It DOES NOT take 30+ minutes to set up an Edelkrone slider and it says more about Gerald than it does the slider if it really took him that long. MOST of what he says in that video is waaaaaaaaaaay over the top and a total hit job on the Edelkrone system. Anywaaaaay ... I've had my system for a few months now (sans the JibONE until it shipped) and I never had any problems with jitters. Not even once. I did get a little freaked out when the slider stopped a few times when I first got it. But it was because I need to tighten the tension. It took all of a minute to do and I haven't need to do it again since. As for the App, it's fairly intuitive, until it's not. Thats a hard one to explain, but I still haven't figured out how to change a lens and tell the app I changed it and not have to start over. I'm guessing there is a way, but I do this so rarely that I just start over and forget to look up the RIGHT WAY for the next time. As for the JibONE ... It's great for a lot of things.. but ... I'm having an issue at this very moment with it being too short for what I want to do, and had to rig up an INSANE stand to hover it over a table because putting it on a tripod wouldn't work. I'd use another jib for the shot but I need the motion control soooo it's a trade off. With all that said, I do encounter the occasional problem with the Edelkrone system, but none so far that weren't a fairly easy fix. But I had the same amount of problems with my old Rhino setup and the REAL difference is that thus far Edelkrone support has been AMAZING! I mean truly top-notch and that was before they had any clue I was going to do a review of the JibONE. Oh .. that and the Edelkrone system is modular which is really hard to beat. But this is just my 2 cents. I know another guy who prefers the Rhino because he's just using it for slider shots. So consider what you're going to use it for and if you want to expand. That's the best advice I can give.
@RealTerrainHobbies
4 жыл бұрын
I watched the Gerald Undone vid the other day and it felt so obvious there was some sort of bad blood between him and Edelkrone. Too bad something like that had to happen, but really happy to hear a second opinion from others out there on that situation and how much things were actually exaggerated. Eases my nerves as I’m very much considering this system.
@jimlutz6691
3 жыл бұрын
Can you mod the bracket ( don't know it real name) where the 4 lines on silver fitting to base? Drill a hole below to elevate the mount and eliminate the contact as shown?
@watchandproduce
4 жыл бұрын
I noticed you are using an Olympus Pro lens with the Focus Module. Can you do a video about getting that to work? The focus rings and motor solution supplied by Edelkrone are just not working with me. It seems to ignore the hard stops and then causes issues with the rings.
@rackovanz
4 жыл бұрын
Have you tried the focus module and laser with a lens that does not have hard stops? If so how did you do it? I got mine today and spent all evening trying to perfect focus haven’t had much luck.
@mariusserbann
4 жыл бұрын
Do you have a problem with the laser and the Jib? My problem is that once I point the laser to select a target and then the camera automatically moves to that selection, my product is not in the middle where my laser was... Am I doing something wrong maybe?
@ubiVidz
4 жыл бұрын
Fortunately for me the only lens I have like this is the Sigma 18-35 and I didn't need to teach it to the system because it was already in the library. As a matter of fact ALL of my lenses were in the library until I recently received a new lens and had to *TRY* to teach it to the system yesterday with disastrous results. I've reached out to edelkrone support about my issue and may possibly do a video about the laser+focus module at some point once I've done a bit more with them.
@rackovanz
4 жыл бұрын
ubiVidz I have the 18-35 as well, how do you handle the soft stops?
@WHITELIONNYC
4 жыл бұрын
SUBBED!!! 🤓😎🥳🤓😎🥳🤓😎🥳🤓😎🥳
@23productionssa2
2 жыл бұрын
Hello, can only use and program the JibONE without any accessories like the Smart head ? while I bought the other accessories...
@MichaelSheridan
4 жыл бұрын
Funny, I have a 'do not touch knob.'
@ubiVidz
4 жыл бұрын
That moment you realize you're going to pay dearly for all the obnoxious comment you left on Michael's videos. LOLOL
@MichaelSheridan
4 жыл бұрын
@@ubiVidz oh yeah
@ubiVidz
4 жыл бұрын
@@MichaelSheridan Uh Oh LOL
@jred9622
3 жыл бұрын
hi Sir have you tried or ask edelkrone if the jibOne would work with the dollyplus Pro also by just 1 app to control both? or all together with the other modules as pan and headplus works with jibOne
@kbstrong9775
2 жыл бұрын
Was there a number you called to speak with someone form Edlekrone? I purchased the jibone + Head Pro + Pan Pro - spent $2700 and the device is jittery. the footage is unusable and I need to get in contact with them because at this point I just have a $2700 hunk of metal that angers me everytime I look at it.
@ubiVidz
2 жыл бұрын
I just emailed support
@AnthonyBab
Жыл бұрын
Lol I spend $5000 and I send it back they annoying. Everyone should listen to this guy before buying
@SoultyBoiBeats
2 жыл бұрын
Its not just a jib it's a machine gun 😂😂😂
@roehaus1
4 жыл бұрын
Pose-1 was pose-2.
@ubiVidz
4 жыл бұрын
LOL, I'm getting old and easily confused.
@soerenkepler
Жыл бұрын
comments on noise?
@MOTIONTOGRAPHY
4 жыл бұрын
Did you notice any more micro jitters after you got it all set up and figured out?
@ubiVidz
4 жыл бұрын
Nope. I've never actually had the "micro jitters". I've had more of a stutter that only happens once in a rare while and fixes with the turn of a knob
@MOTIONTOGRAPHY
4 жыл бұрын
ubiVidz ok Thank you
@michaelbiondophoto
2 жыл бұрын
Great video, funny as shit
@BradleyAllenNewman
3 жыл бұрын
Hmm. To be honest, Edelkrone and Rhino both sound kinda unreliable. Are there other competitors out there?
@Malonesify
3 жыл бұрын
feeling the same way.. have you found any others?
@michellehughes8661
2 жыл бұрын
👀
@jimlutz6691
3 жыл бұрын
2nd jib - use a iPad
@BB-ft6nd
4 жыл бұрын
Use your iPad
@stevehylen7392
2 жыл бұрын
Sounds like you are addressing 8 year olds - hope they get it?
Пікірлер: 159