You are my hero! I've been trying to figure out this sprayer for months. ☺️
@LateBoomer1964
2 жыл бұрын
Oh I'm sorry you didn't find the video sooner. Good luck let me know how your project turns out.
@345kobi
3 жыл бұрын
This device is cheap in price and in quality. Purchased one and took it back. Purchased another and am now taking it back.
@MackeyDeez
3 жыл бұрын
I bought one last year and now I have to buy me another one
@skipperjones7490
3 жыл бұрын
@@MackeyDeez Yep me too. On my second or third one now. This time I am going to keep it in the house over the winter. Read where freezing temps make the seals go bad.
@kotzie9454
3 жыл бұрын
Thank you so much. Much better then having to go to family and ask for help. You're great.
@billgannon9111
Жыл бұрын
Lubricate the o-rings with petroleum jelly.
@LateBoomer1964
Жыл бұрын
Good tip. That would also keep any chemical like vinegar from damaging the rings faster! Thanks
@kstroup1200
3 жыл бұрын
I will add that you only turn the pressure relief valve one way. Once to release, again the same direction to seal.
@LateBoomer1964
3 жыл бұрын
Yes thank you for bringing that up.
@terrismith3775
Жыл бұрын
This is where I have problems with it. The pressure valve. I would release it and then do you turn it more to hear it click?? This is my second year using it and maybe I wrecked the pressure valve??
@missymom53525
3 жыл бұрын
Thank you for this! I was having a booger of a time getting the handle to release on mine.
@LateBoomer1964
3 жыл бұрын
I'm so glad it was helpful. I wrestled with the idea of whether it was really worth making a video. But I had trouble too that's why I thought to show others.
@mildredjones9666
3 жыл бұрын
Not coming out spray one time prime it help me
@Gman-qm6bv
Жыл бұрын
Thanks for your video, my sprayer reached the point where it would no longer build up pressure so I threw it into the trash.
@vegascece
2 жыл бұрын
After reading many of the comments, this sprayer seems to be a one and done. It worked fine last summer. I cleaned it and put it away and now, it won't prime the sprayer as many have said. Cheap.
@LateBoomer1964
2 жыл бұрын
I tend to agree Vegascece. I am having problems this year too. I did see somewhere, (can't remember now) but someone solved the problem with larger seals. I'll let you know if I find a solution.
@vegascece
2 жыл бұрын
@@LateBoomer1964 Thanks much!
@b-mec-him796
2 жыл бұрын
Glad I watched. Don't want it lol
@LateBoomer1964
2 жыл бұрын
Glad I could keep you from making an unwanted purchase.
@darlacoulson8903
2 жыл бұрын
Thank you for such a helpful video✅… Since I didn’t know which part was what; made it “easy-peasy”… now we will see if the natural weed killer I made works! 🤔😉Thanks again!
@LateBoomer1964
2 жыл бұрын
Good luck. If it does work perhaps you'll share the recipe with us. :)
@joesmith-fi1sx
2 жыл бұрын
great vid. thanks. instructions horrible
@lsophial
3 жыл бұрын
Very good presentation. Thank you.
@onixotto
2 жыл бұрын
Thanks love. The damn instructions are too small to read!
@rosmaryk4
2 жыл бұрын
Thank you so much. I didn't know how much to fill it.
@LateBoomer1964
2 жыл бұрын
As long as your liquid is below the release valve you should be fine.
@hibiscustv1195
2 жыл бұрын
I have had this flowmaster sprayer for 10 years and could not get it to release the liquid. Finally, thanks to you , I have mastered this bottle of all bottles. Weeds watch out!
@LateBoomer1964
2 жыл бұрын
You're welcome. I'm so glad I could help.
@yennyh5210
2 жыл бұрын
Thank you very much for the info very well explained, appreciate it .
@LateBoomer1964
2 жыл бұрын
You're very welcome.
@neoandleia
2 жыл бұрын
I got this sprayer today but the the o - ring inside the pump is too small to create a seal. Does yours create a seal?
@LateBoomer1964
2 жыл бұрын
Yes it should create a seal. If it doesn't take it back to the store and try another one. Be sure to check that the release valve is closed.
@neoandleia
2 жыл бұрын
@@LateBoomer1964 thanks! Yes I'll take it in for an exchange
@tomgaglio5274
4 ай бұрын
Its junk doesn't pump up and just try to get parts
@Miansa85
2 ай бұрын
thanks-now i know i did nothing wrong and it is just a piece of garbage that never worked!!
@LateBoomer1964
2 ай бұрын
They are rather cheap.
@scottiemo7
2 жыл бұрын
Thank you so much for sharing. I finally can use it. Lol 😂😊
@LateBoomer1964
2 жыл бұрын
I knew when I made the video that some people would have problems with it like I did, but I never guessed so many people would. You and I are in good company. LOL Hope your project turns out a success.
@scottiemo7
2 жыл бұрын
@@LateBoomer1964 This truly saved me a trip back to Walmart to make a return. My project was a success and I’m using it this morning as well. 💜 Thanks again
@GemmaDaily
3 жыл бұрын
Just purchased a 2 gallon Eliminator and I want to try it out tomorrow (7/24) but I was scared since I have no idea what I am doing. I was stumped when I saw the little plug at the end of the siphon tube and knew liquid would not go through it. However no instruction said remove it. When you hitched up everything and the plug was still in, I remained stumped. But then there was the note on the screen saying you forgot to remove it! Thank you. The rest of the demon was great. I feel confident I can do this now. It's the first time I am attempting to do anything in the yard. I don't know why (since I have a guy who has been doing my yard for 14 years), but I want to do something ! Thank you for this video. I am subscribing! Subscriber # 50!
@GemmaDaily
3 жыл бұрын
@@LateBoomer1964 I absolutely will! 😊
@GemmaDaily
3 жыл бұрын
Assembled and did my test run and my "real" run yesterday. I washed a concrete walkway using 30 Seconds solution in my 2 gallon sprayer. It was perfect and it worked! I paid attention to the little seals when assembling as you indicated and there were no leaks. I literally have never done any kind of yard work before, but this was so much fun seeing the concrete go from dark to light. Looking forward to your next video.
@bambivargo9514
4 ай бұрын
I appreciate your walking us slowly through the set up. Don't want nasty chemicals leaking on me.
@madisonp8745
2 жыл бұрын
I can't get mine to draw any water. Won't prime. When I pull the handle up it just falls back down. everything is sealed tightly. frustrating.
@LateBoomer1964
2 жыл бұрын
If the handle Just falls down then something isn't sealed, it could be a crack somewhere. If you can find the leak take it back and get a replacement.
@madisonp8745
2 жыл бұрын
@@LateBoomer1964 Thank you. This is the second one I ordered. Same thing. That is what leads me to think I am doing something wrong. But yes. I lift up the handle and it just plunges right back down. I'm pretty good with equipment and mechanical things and can't get a sprayer to work! Grrr. Thank you for your video. This remains a mystery to me at this point.
@madisonp8745
2 жыл бұрын
ok Update! Here is the fix in case anyone else has this issue. The gasket which is like a black rubberband (looks like a girl's hair band) in the plunger is too thin! so it does not grab the side walls. I took it out. Wrapped a girl's black rubber stretchy hair band around the area twice and then put the original gasket over that. The hair band helped expand the original gasket so it now grabs the side walls and helped create the pressure necessary. Working like a charm! Thank you so much for your help and for your helpful video!
@LateBoomer1964
2 жыл бұрын
@@madisonp8745 That's awesome. Great information, thank you so much for sharing! :)
@KamuelaSunset
3 жыл бұрын
Seriously, this isnt rocket science
@larussdecrepit7826
2 жыл бұрын
Some people can't or won't read directions.
@graciegriffin9512
2 жыл бұрын
Okay I understand how to assemble it and everything how do I open it back up to add more water
@LateBoomer1964
2 жыл бұрын
Push the plunger down all the way, (just once so you don't build pressure or open your pressure release valve to make sure there is no pressure) Lock the plunger/handle into place like you would to start spraying but instead turn the whole plunger assembly counter clockwise and it will unscrew.
@graciegriffin9512
2 жыл бұрын
Thank you got it thanks
@Gigi-yy7jp
3 ай бұрын
This helped me too. Thanks!@LateBoomer1964
@kaylashipp3582
2 жыл бұрын
I put this together just like you did but it won’t build pressure.. everything is tight and where it should be. I’m confused
@larussdecrepit7826
2 жыл бұрын
Most likely it is the oring in the pump. They are VERY POOR quality.
@chingonaization
2 жыл бұрын
Thank you
@LateBoomer1964
2 жыл бұрын
You're welcome.
@normabarras6868
2 жыл бұрын
I've used it once and it worked perfect. Now I can't get it to pump.There's a tiny plastic black seal on bottom of pump do I remove it or does it stay on?
@LateBoomer1964
2 жыл бұрын
I'm not sure what seal you're referring too. But if it worked fine with it on, I would leave it on. Go back to the last chapter, at 5 minutes and watch, hopefully that will help you trouble shoot the problem. When you say it won't pump, do you mean it won't lift or it won't go back down?
@LateBoomer1964
2 жыл бұрын
If the pump is going up and down but not building pressure then check that the pump housing is tight and no air is leaking around the seal. Also make sure the pressure valve is closed and the little nob on the sprayer is closed.
@vegascece
2 жыл бұрын
Did you ever get it to work? I have the same problem. Worked fine last summer and I've used these types of sprayers before so it's not a user issue. Is the thing a one and done? I think so.
@wendysmith2587
Жыл бұрын
You helped me tremendously I would not have been able to assemble it without you! 😊🎉❤
@LateBoomer1964
Жыл бұрын
I'm so glad I could help.
@jeanellis1751
3 жыл бұрын
I Appreciate you Late Boomer, thanks for the video!
@LateBoomer1964
3 жыл бұрын
You're most welcome. And thank you for the lovely compliment.
@marcelocalzada7484
3 жыл бұрын
noice
@denisethompson1112
2 жыл бұрын
Thank You For Easy Instructions ...
@LateBoomer1964
2 жыл бұрын
You are welcome!
@sarahgraham3561
2 жыл бұрын
No matter what I do, mine will not build up pressure, I've tried everything and it just won't work
@LateBoomer1964
2 жыл бұрын
Check spray nozzle to make sure it's not open, check connection between hose and housing check that the pump is screwed on tightly and the threads aren't misaligned and check the release valve If none of those work I suggest taking it back to the store for an exchange.
@LateBoomer1964
2 жыл бұрын
Check out this video see if this might be your issue. kzitem.info/news/bejne/uoag3Yqap4p-mXo
@carimmacasapad5318
2 жыл бұрын
Magkano po yan
@LateBoomer1964
2 жыл бұрын
Tumatakbo sila sa paligid ng 10 hanggang 15 U.S. dollars. Maaari mong mahanap ang mga ito sa karamihan ng mga tindahan ng hardware o mag-order mula sa Amazon.
@savagepoet6269
3 жыл бұрын
Its great... But, after a few uses I noticed it became harder and harder to break the seal and unscrew the pump from the bottle. Mine wouldn't budge and as I was trying to unscrew it... It broke. Now I can't get it open. Even with the valve release taken entirely off. 😒
@LateBoomer1964
3 жыл бұрын
They are cheap. Did you drain and rinse yours after each use?
@lsophial
3 жыл бұрын
Returned to the store where you bought it, exchange or get your $ back. If you don't have a recite, let them to find you in their computer by using your credit card, if you paid with a credit card.
@zozolu
2 жыл бұрын
Thank you!
@LateBoomer1964
2 жыл бұрын
You're very welcome. Thank you for watching.
@audreyderrick4972
3 жыл бұрын
Mine won't spray
@LateBoomer1964
3 жыл бұрын
I'm sorry. Not being able to see it, here are few things that might help. Make sure you have taken the plug out of the straw part that goes into the canister. Also make sure you have a good seal where the straw fits into the canister. Make sure the release/pressure valve is closed and there is a good seal and the pump is screwed on tight. Lastly sometimes it may need a few pumps to get the air out of the line. Good luck.
@audreyderrick4972
3 жыл бұрын
@@LateBoomer1964 thank you it end up spraying after the few extra pump's 🙏
@ivyvelez327
2 жыл бұрын
You are so right. My was not working properly. And, had already filled up with Roundup!! Dangerous!!
@LateBoomer1964
2 жыл бұрын
I hope you managed to get it working before any disasters happened. Good luck.
@EatingSugarNoPapa69
3 жыл бұрын
Thank you💯
@shingj4007
3 жыл бұрын
I was having difficulties trying to assemble the same sprayer, your video is the best that I found here. It is now assembled with the help of your video. I have one question remaining: How do you know when the tank is pressurized enough to start spraying? Thank you so much.
@LateBoomer1964
3 жыл бұрын
At about 6 minutes into the video you can see me pumping it up. It should give you an idea of how much pressure. When there is resistance you know you will have enough pressure to start spraying. I suggest filling with plain water and practicing with it, before using with harsh chemicals. When it's difficult to pump it should be ready. Good luck.
@shingj4007
3 жыл бұрын
@@LateBoomer1964 Tested with water, ready for weed killer tomorrow morning. Thanks. 👍 🙏
Пікірлер: 89