Correction from the company: The "weight is made of cement with an outer shell. Additionally, we offer a warranty for it.This composition has obvious benefits in terms of durability, corrosion resistance, and wear resistance, and it is common in home gym equipment."
@gervaiselantier
15 күн бұрын
Great video, thanks! Do you know of anything similar but that only goes up to 100 lbs? Or less?
@SkylerKing
2 ай бұрын
Incremental weight jumps can be done via a weighted pin. You can also overload the stack by using the same weighted pin to hang plate weights. The weighted pin I am describing is essentially a 13mm weight stack pin, but rather than a little handle at the end, it has a 50mm sleeve, similar to a barbell, for the purpose of loading with plate weight.
@hybridresistance
2 ай бұрын
@@SkylerKing thank you, my man!! Hope all is with you and family brother.
@Mrwatson185
2 ай бұрын
Plastic weight stack is wild. Not for me, but as always top level overview Mike!
@hybridresistance
2 ай бұрын
@@Mrwatson185 the plastic will for sure be a game breaker for some. Thanks as always for watching.
@jonduvall2135
Ай бұрын
They have a G5 version, which has a steel stack. I just got one. I haven't seen any promos for the G5, I actually can't even see it on their website. I got mine from Temu for ~$630.
@Joe-qs2bq
2 ай бұрын
Bells of Steel / Titan have an interesting cable tower. Bells of Steel has a whole ecosystem built around their's...Thanks for the review 👍
@Joe-qs2bq
2 ай бұрын
Turned off by the plastic weight stack
@hybridresistance
2 ай бұрын
@@Joe-qs2bq that’s the one I was somewhat comparing them too. I almost wanted to review that one, but figured that’s been done already. I also really wanted to see how this cheaper one would compare. I think if you’re just looking for a single stack and else, this thing does the job.
@MyHomeGym_
2 ай бұрын
This one looks legit, Mike - space saving design, perfect for a home gym. 👍
@hybridresistance
2 ай бұрын
@@MyHomeGym_ thanks as always Larry.
@dannywizz
2 ай бұрын
Great video! In China they make hybrids of these: both weight stack and plate loaded combined. This technology I believe is the future for budget home gyms since the biggest cost is "weight" and logistics.🤔
@hybridresistance
2 ай бұрын
Thanks Danny.
@loulopez554
2 ай бұрын
Another very good and honest review.
@hybridresistance
2 ай бұрын
Thanks Lou! I always value your comments / feedback. Feel free to let me know some stuff you want to see in future videos.
@thomaskennedy7842
2 ай бұрын
Can you put J-cups on the front tube? That's one of the things that's always intrigued me about those bells of steel towers is the fact that you can put two of them side by side and then use them as a squat rack because they're designed to be able to handle J cups and spotter arms.
@hybridresistance
2 ай бұрын
@@thomaskennedy7842 I think you could yes. Thanks for bringing that up.
@Fitnessgadgetso1
2 ай бұрын
It's very good video
@sydneybird116
Ай бұрын
I enjoy my Titan Fitness Wall Mounted Pulley Tower (Tall) but I have to load the plates (I'm lazy). There is a convenience factor in a stack but not for 3x the price and that stack doesn't have small enough increments. Mine doesn't have foot plates, but this gives me an idea. Thanks for a great review.
@hybridresistance
Ай бұрын
@@sydneybird116 thanks so much Sydney. I’m actually loving this thing, and since it’s covering all my main cable exercises, I’m finding I’m not even turning on my gym monster.
@ShawntreezyBreezy
2 ай бұрын
Looks just like my Mikolo , my top weight would lean though with the weight selector bar hitting the inside plates when it went back down
@hybridresistance
2 ай бұрын
Thanks for sharing that. I think I had that but needed to tighten the bottom screw s
@sobutterysmooth
2 ай бұрын
Great video as always.
@hybridresistance
2 ай бұрын
@@sobutterysmooth thanks brothers. Appreciate you watching as always.
@fatboitino2
2 ай бұрын
Iron and still must still be up, if they’re using cement or sand filled piates
@stevennielsen1016
17 күн бұрын
Can you use a free weight stack pin with this easily to add weight to the stack? I am for the most part looking at the Bells of steel cable tower weight stack version. But trying to justify the cost difference. I am interested to know how this compares.
@hybridresistance
16 күн бұрын
I honestly don't know about that. I've since given this away to my neighbor as a I got a new stack coming in. I will say the default stack is pretty heavy on its own right with the 1:1 setting
@abdullahhabib297
2 ай бұрын
I wish they had a standalone version
@hybridresistance
2 ай бұрын
@@abdullahhabib297 me too. I really didn’t want to drill into the wall/brick
@ajohnson5080
2 ай бұрын
How to flys feel on it? From your video appears to maybe be a tad too narrow?
@hybridresistance
2 ай бұрын
I really wanted to show it for the video, but I'd normally not do flys on here. But actually when I went from flys immediately in to this narrow chest press (focusing on the muscles), felt pretty good. But yes, overall too narrow
@ajohnson5080
Ай бұрын
@@hybridresistance are the holes in the post like those in the Bells of Steel model? If so, can it take attachments?? If so- If this or the G5 hits 550 again I’m all over it
@bpham23
2 ай бұрын
I saw the G5 on Temu with the real weight plates, it was as low as $550, now it's $640.
@hybridresistance
2 ай бұрын
Dang. I got to check that out. Temu's always a gamble (at least with my experience) but with a price like that, one that might be worth it.
@jonduvall2135
Ай бұрын
Yeah I have the G5, the weight stack is legit. There are some design issues, but for the price it is great.
@bpham23
Ай бұрын
@@jonduvall2135 hope to see a video of it, thinking of getting one
@jonduvall2135
Ай бұрын
@bpham23 I won't be doing a video, but if you have product related questions, let me know, and I'll try to answer them. I know the product description on temu was really vague.
@bpham23
Ай бұрын
@@jonduvall2135 what are some design issues that you mentioned? TIA!
@cyclwestks
2 ай бұрын
With resistance bands & weight bar I think I’ll stick with my $75 TG Fit, lol.
@hybridresistance
2 ай бұрын
Love it brother. Got a video coming on this type of thing. I wish you guys could all see the myriad of comments I get. For every "TG is all I need", I get, "I used a TG and it's trash" comments. I just want to make sure everyone sees a variety of options (and sees various responses such as yours) to different equipment.
@Timm129
2 ай бұрын
Plastic plates filled sand?? That's a big no go for me. .
@hybridresistance
2 ай бұрын
I made a correction (not that it matters much) but the company told me they're actually cement.
Пікірлер: 48