Missed opportunity. Too much talk about how good it is, not enough about how to use and take advantage of its features. Why is it that when it comes to learning about how to use products in general, that consumers need to seek out to watch third party videos as opposed to one’s made by manufacturers?
@OliKember
5 ай бұрын
I wish all the controls just had their own knobs. The one giant knob and multiple combinations of clicks and holds to reveal parameters means that you can't just see where you're at at a glance. I get that this is because it's a digital amp, but the best of both worlds would be cool.
@weareevoaudio
5 ай бұрын
Thank you for your feedback. There is also the EVO control software that gives you all the controls in a signal software window if you'd prefer not to use the hardware controls.
@shALKE
Жыл бұрын
Can we have an option to toggle if you want the speakers to get muted when you plug in the headphones ? I would rather have both output at the same time.
@weareevoaudio
Жыл бұрын
This is a hardware feature of the device as the outputs are both driven from the same amp and therefore cannot both be active at once.
@electrba
Жыл бұрын
Hi I am about to purchase this. But had a question. Is the guitar input at the front a separate channel input to the two mic combo inputs on the back?
@weareevoaudio
Жыл бұрын
Its not a separate channel, plugging a jack into the instrument input will override the Mic/Line input on Channel 1.
@bvtsu.
7 ай бұрын
I'm in love with my EVO 4
@Soduzt
Жыл бұрын
Hey question ?, I'm new and planning on recording vocals with a cad m179 would this audio interface be a good option
@weareevoaudio
Жыл бұрын
Hello, yes, the EVO 4 would be a great partner for the CAD M179!
@unbiasOrbit
Жыл бұрын
I have a quick question. When setting up the smart gain, do I speak into the mic with normal volume or should I speak louder than usual so that it can gauge what level "clips" the audio?
@weareevoaudio
Жыл бұрын
When using Smart Gain, you should try to use the loudest part of the track you are recording so that your inputs won't clip during this passage. Smartgain does leave you some headroom however so it's not the end of the world if your performance is a little louder than the Smartgain listening period.
@Accuaro
Жыл бұрын
Question: can one of the channels for mic be set to mono? I would like to use a SM7B for recordings and it would save so much time not having to fix sound coming out of only one channel. Currently using a Solid State Logic SSL2+ and looking for another interfaces.
@weareevoaudio
Жыл бұрын
This would typically be adjusted on the software you are using for recording. In most DAW's you just need to ensure you are recording onto a Mono Track, or in some more simple recording software, you may just need to select a "Mono Audio" setting in the preferences. If you do need any help with this, let us know what software you use.
@vio4jesus
4 ай бұрын
QUESTION: Can you use both the headphone out, and the main outs, running them to a PA - both at the same time? You mentioned something in the video about muting the main outputs when you plug in the headphones.
@weareevoaudio
4 ай бұрын
No, it's not possible to use both outputs at the same time. The Smart Mute feature will automatically mute the speaker outputs when a set of headphones are plugged in.
@ibra5o6
10 ай бұрын
Hello audient . I have the 250ohms DT770 would the evo4 do a great job of powering it?
@weareevoaudio
10 ай бұрын
The EVO 4 would drive the DT770 fairly loud and would work well for most recording/listening situations.
@ibra5o6
10 ай бұрын
@@weareevoaudio thank U so MUCH , what would U recommend for the dt770 250ohms the EVO4 or the ID4 mkii
@weareevoaudio
10 ай бұрын
Both will have similar output levels so it depends on which one you prefer best for its other features
@jasonfallon4968
7 ай бұрын
Will this work perfectly with an iPad Pro only. I don’t have a computer.
@WillBontempo
20 күн бұрын
This might be a silly question, but is there a proper way to turn it off after use or do we simply unplug it from the computer?
@weareevoaudio
20 күн бұрын
You can simply unplug the USB cable to power down the unit, there is no other way of turning it off.
@WillBontempo
19 күн бұрын
@@weareevoaudioAwesome, thank you.
@botzer8817
Жыл бұрын
I have an issue on my Evo 4, when there is mic clipping the interface is not handling it well (only when monitoring is on, about 50% for example), after that it starts buzzing there's a static noise in the headphones output until I unplug and replug the interface to my computer. Its very annoying for streaming for example, only a little plosive clipping and I've got this issue (in the headphones output, even if I unplug the mic it keeps buzzing like a tinnitus). Also I cannot download any software on the ARC website, even thought I already registered my evo 4. I cannot claim anything.
@weareevoaudio
Жыл бұрын
That is very strange behaviour. If you haven't already, can you please get in touch with the Support team at support@evo.audio with your units serial number and more info about your setup so we can help resolve this.
@jessical4327
Жыл бұрын
hey there, i'm new to recording so bear with me! i'm trying to figure out how to use my 2 XLR mics through EVO 4 interface to my Nikon Z30. I would like to have stereo recording, have one mic be as the left mic and have the other be as the right mic so I can have a binaural audio when I record. I'm currently using 2 XLR cables to power my mics which is connected to my evo and then i have a dual 1/4" TS (connected to my evo interface's line outputs) to 1/8" TRS jack (connected to my camera). For some reason it only sends a mono signal to my camera. I had a zoom H4N before as an audio interface and it would send a stereo signal to my camera. Please give me suggestions on what I should do! thank you!
@weareevoaudio
Жыл бұрын
If you press and hold the Monitor Mix button on the unit (upper button on the right hand side) and then turn the control knob, this will adjust the panning of the two inputs. Turn the knob fully clockwise to get full stereo.
@jessical4327
Жыл бұрын
@@weareevoaudio omg thank you so much!!!!!!!!!!!!!!!!!
@teddystinson
2 ай бұрын
Hii, Does this work well with the Waveform DAW ?
@weareevoaudio
Ай бұрын
We've not personally used Tracktion Waveform, but looking at their website, the EVO 4 should work perfectly with it.
@simarjsingh
4 ай бұрын
hey EVO could you please reply that, If I have bought a EVO 4 should I buy Beyerdynamics ft 770 80ohms or 250ohms? Do they have enough power to drive 250ohms or not?
@weareevoaudio
4 ай бұрын
Hello, the EVO 4 will drive the 250 Ohm Beyerdynamic DT770's to a more than usable volume so you can use either the 80 Ohm or 250 Ohm version.
@AcysLounge
Жыл бұрын
Is it normal Evo 4 gets warm on the side where the UCB-C port is, when no micro or guitar is plugged in, and also nothing to any output?
@weareevoaudio
Жыл бұрын
The EVO 4 can get a little warm when just plugged in via USB. All the brains and processing of the EVO are in that area so it will output some heat in that corner but this is normal
@Neil_Hyde
Жыл бұрын
LOVE LOVE LOVE My EVO 4!
@weareevoaudio
Жыл бұрын
WOO! Glad you are enjoying it!
@hamaibaran7326
Жыл бұрын
Hi, I need help, I am new to audio recording. I just bought Evo 4, I am using it with Shure sm57, it records, but, I need to monitor my voice when I speak to the microphone. The headphone output only works when I play back the recording not when it is recording. Is there any way for me to be able to directly monitor my voice while recording? Thank you.
@weareevoaudio
Жыл бұрын
Yes, you'd just need to press the Monitor Mix button (upper button, right hand side) and then turn the control knob anti clockwise, you you should then start hearing the Mic input in your headphones. This will be a little quieter than the playback from the PC so you may need to increase the headphone volume slightly to hear yourself clearly.
@AnonDW40
Жыл бұрын
I just purchased this and was wondering if you guys had any trouble shooting issues with the product, I’ve connected multiple microphones and I can’t get anything audio for input.
@weareevoaudio
Жыл бұрын
Hello, i you haven't already, can you please check out out help desk where you may find an answer to your question: support.audient.com/hc/en-us Otherwise, our support team can help at support@audient.com
@iamwisdomsky
8 ай бұрын
hi, I'm pretty new to all of these and so I'm dumb, is it possible when using this to live mix both the application audio(like spotify) and input from the mic into a new input device? my plan is to use it for discord and I want to add a background music while I'm talking in a voice channel.
@weareevoaudio
8 ай бұрын
Yes, you can do this using the Loop-back mixer to bland your audio playback and mic signals into a single stereo mix you can then feed into streaming or recording software.
@Neurotoxus
Ай бұрын
I'm getting an issue where I can hear everything fine except when monitoring. I can only hear myself on the right side, but software wise it seems fine.
@weareevoaudio
Ай бұрын
You can adjust the Monitor Panning by pressing and holding the Monitor Mix button and turning the main control knob until the LEDS on the meter ring meet in the middle
@markmceachin_music
Жыл бұрын
I’m having trouble getting the 2nd input to work. If I plug into the instrument channel and mic into input 2, only instrument comes through. If I plug mic into input 1, and acoustic into input 2, only mic comes through. Input is set to correct channels in garage band. Any ideas on how to fix this issue?
@weareevoaudio
Жыл бұрын
Hey there, Are you able to submit a ticket using the link below so our team can assist you with this? support.audient.com/hc/en-us/requests/new
@Mixfootage
8 ай бұрын
Question : I mix on headphones so does the audio interface matter for audio mix & master..? If yes, how much does it improve the sound quality? EVO 4 Is Better For that things..?
@weareevoaudio
8 ай бұрын
The Audio interface itself will not affect the quality of the mix if you are bouncing entirely inside the DAW but having the best monitoring possible means you can make the best mix decisions and ensure it will translate better onto other systems
@mrigakshisarmamusical5844
Жыл бұрын
BM 800 condensar microphone doesn't working with EVO 4. But dynamic microphone is working. What is the problem ?
@weareevoaudio
Жыл бұрын
Sounds like a Phantom power issue. Can you ensure the 48V is turned on for the channel that the Mic is connected to? Also ensure you are using an XLR cable not a 1/4" jack
@valleyonthebeatz
Жыл бұрын
Great tips! Can we have a breakdown on the audio playback feature? Thanks!
@nulla9601
Жыл бұрын
I have 2 input devices (a Macbook and Windows pc) from which I want to get the audio from into 1 headphone. Would this be a solution for that? and if so which cable should I best use?
@weareevoaudio
Жыл бұрын
You would want to connect on of the Computers to the EVO via USB. Then on the second Computer, use a 3.5mm to 2x 1/4" TS splitter cable to feed this into the two inputs on the EVO. Now press the monitor Mix button (Upper button on the right) and adjust the control knob until you have a good balanced between the Mac and Windows PC.
@sertancan7922
Жыл бұрын
I have evo4. Direct monitoring option in cubase 12 is greyed out. How do I use direct monitoring?
@weareevoaudio
Жыл бұрын
To use direct monitoring, you'd just need to press the Monitor Mix button (Upper button on the right) and turn the control knob anti-clockwise, you'll then slowly blend in the direct monitoring with your playback signal.
@lancomtre
Жыл бұрын
Hey, I’m an iPad only user, and as an iPad user I have only 1 usb c port, can I plug the evo on a thunderbolt hub? I plug the hub directly on my iPad.
@weareevoaudio
Жыл бұрын
Yes, you should be able to use a USB hub to connect the EVO 4 to an iPad with a USB-C port.
@producer1762
Жыл бұрын
Im thinking of getting this as an interface for my Ipad to be able to use with another interface or mixer. Is it correct that I can take the two outs as a stereo and plug it into another interface or mixer (instead of the usual setup of monitors/headphones) ?? Also, does this somehow have any MIDI capablities, through the usb? Answer is greatly appreciated :)
@weareevoaudio
Жыл бұрын
Yes, you can just use the outputs as line outputs to feed another interface or mixer, just turn the main volume all the way up to get a good signal level. The EVO 4 doesn't handle any MIDI I'm afraid.
@producer1762
Жыл бұрын
@@weareevoaudio Thanks! Is it like just good enough signal or really standard Line level?
@weareevoaudio
Жыл бұрын
The outputs are at line level and are balanced so should be able to plug directly into your mixer without any problems.
@joshlee6952
Жыл бұрын
Just got the Evo 4 and I get no audio out of my studio monitors when I have my headphones plugged in. How do I fix?
@weareevoaudio
Жыл бұрын
This is the Smart Muting function on the EVO 4 that will automatically mute the monitor outputs to allow for more accurate headphone monitoring. If you do need simultaneous monitor and headphone audio, We'd recommend either the iD4 or EVO 8 interface instead.
@kumarkhati8962
8 ай бұрын
Hlow sir,, I recently purchased evo 4.but my headphone not working properly. sound only in left side. so how to fixed this issue?
@weareevoaudio
8 ай бұрын
Are you using a 1/4" to 3.5mm headphone adaptor, if so can you ensure that the headphones are fully seated into the adaptor as some have screw threads that can stop the headphones from connecting fully? Also if you have a set of headphones with an inline mic, the TRRS jack can sometimes cause issues so you may need to use a splitter to separate the headphone and mic channels to their own TRS jacks.
@drownyourfish
3 ай бұрын
Yo, i got my headphones plugged into the EVO-4 and i can hear sounds fine on youtube and everything, except when playing any video format locally on any video player. Anyone know what's going on?
@weareevoaudio
3 ай бұрын
Hello, what OS and video player are you using? We can then help you adjust some settings to get this working.
@FurkanTopal
5 ай бұрын
Is this the smallest on the market? Asking for travelling purposes.
@weareevoaudio
5 ай бұрын
We're not sure if it's the smallest, but it's certainly pretty small and light enough to use while travelling. Its also fully USB bus powered so you don't have to carry an extra power supply or worry about finding a power outlet.
@kittycloudz813
2 ай бұрын
Can the headphones be routed to channel 3-4 so you can headphone cue independently of the main outs?
@weareevoaudio
2 ай бұрын
On EVO 4, the headphones are fed from the same source as the speaker outputs. Also plugging headphones in will automatically mute the speaker outputs so it's not possible to use both outputs at the same time. If you need a separate headphone output for a CUE mix then I'd recommend the EVO 8 or iD14 MKII instead.
@kittycloudz813
2 ай бұрын
@@weareevoaudio missed opportunity for Djs and Live performers, and why make the default muted output not changeable in the software…smh
@amithmj9255
Жыл бұрын
Can this use for mobile live streams ?
@weareevoaudio
Жыл бұрын
The EVO 4 can be used with iOS devices for mobile live streams.
@nerddeconsumo
Жыл бұрын
Does it have DIRECT MONITORING with zero latency? Thanks!
@weareevoaudio
Жыл бұрын
Yes, using the monitor mix control on the unit, you can listen to your inputs directly with practically zero latency.
@yoitsmefr
7 ай бұрын
Hi can i use a matching pair of SE electronics sE8 xlr mics in stereo configuration?
@weareevoaudio
6 ай бұрын
Yes, that would work perfectly well with EVO 4!
@j-walkman1689
Жыл бұрын
hey! I have a question, can you play back audio through the speakers and headphones at the same time?
@weareevoaudio
Жыл бұрын
That isn't possible I'm afraid. The Smart Mute function will mute the speakers when a headphone jack is inserted.
@AlmostProfessional1995
Жыл бұрын
Hey Evo team! Need an assist when you have a minute. 😊😊 My current Model: EVO 4 LED lights show it recognizes the sound coming from both 1&2 1/4 input but I cannot hear anything coming out of my headphones. Nor can I hear any audio from my IOS device paired with the standard lightning camera adaptor using a usb hub. If no thoughts, I suppose my question would be could you do a breakdown of the monitor mix?
@weareevoaudio
Жыл бұрын
Hello there, If you haven't already, can you send a message to support@audient.com and one of our team will be able to help you with this setup. Please include as much info about your setup as possible (OS, Computer, DAW, Apps...etc)
@21recordsmix
Жыл бұрын
Audient plzz give me an advice Should i buy evo 4 or id4 for recording vocals
@weareevoaudio
Жыл бұрын
Both would work great for vocals. If you prefer the Smart Gain feature on the EVO 4 then go for that, or if you prefer the metal chassis of the iD4 go for that. Either way, you should get great quality recordings!
@tericknelson9015
Жыл бұрын
I have a brand new Evo 4 that isn't being recognized by FL Studio and the application just wont open!! Im using windows 10 ...HELP!!
@weareevoaudio
Жыл бұрын
Hello, can you please try a different USB port or a different USB cable as this sounds like a USB connection issue. If you are using a USB hub or adaptor, can you try plugging it in directly instead?
@Maffio786
Жыл бұрын
Im gonna buy this .. But i have a question . . i want to make beats with this interface with headphones on fl studio . how loud should i set the volume on the interface ? : )
@weareevoaudio
Жыл бұрын
It's difficult to say as it depends on the make of your headphones, you're actual ears sensitivity and how loud your beats are. Just turn up the headphone volume until you have a comfortable listening level and try and avoid long sessions of loud monitoring to protect your hearing!
@Maffio786
Жыл бұрын
@@weareevoaudio thank you : )
@zardyzardy8946
Жыл бұрын
Can the EVO 4 power my dt 770 pro 80 ohms? I would like to buy one for FPS gaming I need to hear the foot spets clearly.
@weareevoaudio
Жыл бұрын
Yes, the EVO 4 can drive a pair of DT770's fairly loudly.
@2112sege
Жыл бұрын
Can the newly released type-c input ipad be attached to this device (Evo 4)?
@weareevoaudio
Жыл бұрын
Yeah. You can connect the EVO to a iPad with USB-C just using a USB-C cable.
@DragonsDogma2
Жыл бұрын
Hello 👋🏻 sorry to bother the community, but I just got my 1st new iPad Air 5th Gen M1 chip 2022 for recording through garage band. I believe those are the specs 😅 ?????? So will the Evo 8 be compatible with this new iPad Air that I just got, or it the Evo 4 the only one compatible with the iPad Air 2022? Thank You 🙏🏻
@weareevoaudio
Жыл бұрын
The EVO 8 isn't officially supported on iOS I'm afraid. You may be able to get basic input and output if it is connected to an iOS device but because you do not have access to the EVO control app, you do loose a lot of functionality.
@SidhuGhising
6 ай бұрын
Is this enough to power dt770 pro 250 ohm headphone?
@weareevoaudio
6 ай бұрын
Yes, the EVO 4 should be able to drive the DT770 to good listening volumes for most applications.
@ames550
Ай бұрын
Can you do voice-over quality work on it?
@weareevoaudio
Ай бұрын
Yes, the EVO 4 is perfect for high-quality VO and will give you clear, low noise recordings.
@EmberHound
Жыл бұрын
My evo4 that i just got yesterday is popping/ distorting. This being my first time using an audio interface I’m not sure why this is happening… any ideas?
@weareevoaudio
Жыл бұрын
I'm sorry to hear you are having issues, could you send a message across to support@evo.audio with more details about your setup and I'm sure our team will get you up and running!
@ghostchet232
Жыл бұрын
will this allow to record two inputs at the same time? say guitar and a vocal ?
@weareevoaudio
Жыл бұрын
Yes, the EVO 4 has two input channels so you can record a Mic and a Guitar at the same time.
@ghostchet232
Жыл бұрын
@@weareevoaudio brilliant
@driza97
Жыл бұрын
cool video. love the evo4.
@weareevoaudio
Жыл бұрын
Glad you are enjoying your EVO 4!
@paulmaher1705
Жыл бұрын
Can you set phantom power independently on each XLR input?
@weareevoaudio
Жыл бұрын
Yes, you can, Just tap the channel you wish to use phantom power on and then tap the 48V button to turn on phantom for that channel only.
@paulmaher1705
Жыл бұрын
@@weareevoaudio thanks 👍
@XASMATV.
Жыл бұрын
Is there a way to plug my 3.5jack speakers in evo 4?
@weareevoaudio
Жыл бұрын
Yes, you can! I'd recommend using a 3.5mm to 1/4" adaptor and connecting this to the headphone output.
@fernandoscolletion
Жыл бұрын
How can I cgharge teh iPad once the output is used with the Evo 4 ??
@weareevoaudio
Жыл бұрын
If you are using a USB hub, you should be able to use this for charging.
@fernandoscolletion
Жыл бұрын
@@weareevoaudio But if I have to buy a power hub that muss be connected to the net, would not be better to connect the EVO to the net, so that the iPad must not feed the EVO? Less things, less cable , less money. I mean it looks convenient to feed the evo with the iPad... but the reality is other...
@fernandoscolletion
Жыл бұрын
Maybe the next product with a USB-C PD for feeding the iPad, so would be fine and a clean table without hubs ;-) Thanks
@ok_teachme
Жыл бұрын
Can I use this with 2 microphones? 1 mic is a mic'd amp the other one is vocals?
@weareevoaudio
Жыл бұрын
Yes, you can use two microphones at the same time on the EVO 4.
@ok_teachme
Жыл бұрын
@@weareevoaudio You got yourself a new customer then
@ok_teachme
Жыл бұрын
@@weareevoaudio Also, can I use my Desktop PC's speaker's 5+1 sound system as output for the audio interface? I don't want to buy studio monitors just yet. I'd like to play my guitar and hear it from the computer speakers at this point. Since the speakers have RCA, I can't connect them to the Audio Interface. But since the audio interface connects to the PC via USB cable is it possible to get the output from Desktop PC speakers without monitors?
@weareevoaudio
Жыл бұрын
If you're desktop speakers have a left and right RCA input then you can just use a pair of TS to RCA cables to connect them to the speaker outputs of the EVO 4 and that should would just fine!
@ok_teachme
Жыл бұрын
@@weareevoaudio Sweeeeet
@lletnom408
Жыл бұрын
Can you run guitar pedals through the evo4? If so how?
@weareevoaudio
Жыл бұрын
You can just plug the output of pedals into the DI if you want to use them while tracking. If you wanted to send pre-recorded audio out to a pedal and re-record it then the EVO 4 wouldn't really work. You'd need the EVO 8 which as additional output channels, allowing you to send audio out, and monitor the processed signal.
@lletnom408
Жыл бұрын
@@weareevoaudio thank you! Thought that would be the case :D
@Sonders47
Жыл бұрын
I've had so much trouble with this Evo 4, it lowers my monitor speakers by half it's volume once connected to the evo 4.
@weareevoaudio
Жыл бұрын
This doesn't sound like normal behaviour for the unit. Can you please let me know what monitors you are using with the EVO4?
@Sonders47
Жыл бұрын
@@weareevoaudio I’m using Edifier mr4s
@weareevoaudio
Жыл бұрын
Those speakers should work just fine. If you haven't already, can you please send a message to support@evo.audio and our team can help you troubleshoot.
@rockweiler4638
Жыл бұрын
How can i use my mic and guitar from EVO 4 to Reaper DAW to Discord/Zoom/Gmeet I've been trying to figure it out, I use VST to enhance my guitar from DAW
@weareevoaudio
Жыл бұрын
Are you on macOS or Windows as the setup will be slightly different?
@rockweiler4638
Жыл бұрын
@@weareevoaudio On windows
@weareevoaudio
Жыл бұрын
Hello there, You would set your inputs in Reaper to The EVO inputs 1+2. The output in Reaper should be EVO 4 Loopback Outputs 1+2. You may need to adjust the output range in the audio preferences for these channels to show up. Then in Discord/Zoom/Gmeet...etc set your input device as EVO 4 Loopback 1+2. Finally, in the EVO loopback Mixer, pull up the Loopback 1+2 channels. Do not pull up any other faders or you may get feedback.
@rockweiler4638
Жыл бұрын
Okay, how do i monitor the loopback now? I've adjusted the knob in the EVO 4, but it monitored my Mic and Instrument Raw, not my loopback.
@weareevoaudio
Жыл бұрын
Its not possible to directly monitor the loop-back channels, you'd just need to set up a second send on the reaper channels to output the same audio to outputs 1+2 as well as the Loop-back channels
@cryptomaniac6926
Жыл бұрын
can we use this in an android tablet?
@weareevoaudio
Жыл бұрын
The EVO 4 doesn't support Android devices I'm afraid.
@jeraldabanid7901
Жыл бұрын
It is compatible with Ableton live 11?
@weareevoaudio
Жыл бұрын
Yes, the EVO 4 is compatible wth Ableton Live
@AugmentedNick
7 ай бұрын
How to use direct monitoring?
@weareevoaudio
7 ай бұрын
Press the Monitor Mix button (upper button on the right-hand side) and turn the control knob anti-clockwise. You'll now be directly monitoring your inputs. You can use the control knob to adjust the balance between your direct mic signal and the playback from the PC.
@informationmedia395
Жыл бұрын
Please help my evo 4 not working...
@weareevoaudio
Жыл бұрын
Hello, I'm sorry to hear you're having issues with the EVO 4. Can you send a message over to support@evo.audio so our team can help you?
@joachimlindback
4 ай бұрын
iOS/iPadOS supported?
@weareevoaudio
4 ай бұрын
You can connect the EVO 4 to an iOS/iPadOS device and it will give you stereo input and output. Please note that you do not have access to the EVO Control software on iOS/iPadOS.
@joachimlindback
4 ай бұрын
@@weareevoaudio Is that software required for use with Logic Pro or Garageband?
@weareevoaudio
4 ай бұрын
No, you'd not need the software to use Logic Pro or Garage band on an iOS or iPadOS device.
@AminaemilieP.k-ns9dr
Жыл бұрын
I am getting buzzing on my microphone, and i dont know why. I use GarageBand so there Are many bytting i can use when it comes to volume. I can sing hugh because it Get buzzing in my headphones right away.
@weareevoaudio
Жыл бұрын
Hello, if you haven't already can you please send a message to support@evo.audio and our team can help you. If you can include a sample of the buzzing you are getting that would be super useful!
@donfrix4570
5 ай бұрын
How many ohms?
@weareevoaudio
5 ай бұрын
On which Input/output? Could you please clarify and we'll help you.
@roxchama2053
8 ай бұрын
I love it
@siamakalipour61
Жыл бұрын
You must disconnect the headphone socket to hear the sound from the speaker this is same issue in evo 4 and evo 8
@weareevoaudio
Жыл бұрын
Yes, this is the Smart Muting feature on the EVO 4 to allow for better headphone monitoring.
@jpgdesign
Жыл бұрын
@@weareevoaudio can you turn off this smart muting feature?
@weareevoaudio
Жыл бұрын
Its implemented in the hardware using switching jacks so its not possible to disable this.
@jpgdesign
Жыл бұрын
@@weareevoaudio Thank you for the answer! im very excited, my EVO 8 will be arriving soon 🥰
@RodeoDrivexx
5 ай бұрын
PS5 compatibility?
@weareevoaudio
5 ай бұрын
We do not offically support using EVO 4 on a PS5 I'm afraid.
@hamings3075
Жыл бұрын
How to turn it off?
@weareevoaudio
Жыл бұрын
Just unplug the USB cable to turn it off!
@wildstevecomedy1
10 ай бұрын
Not working ill be contacting tormarow
@socialdef3
9 ай бұрын
You sure it's not your spelling buddy? Good luck contacting tormarow, rather, how did things go yesterdayum
@MrNanpaps265
Жыл бұрын
Audient why is your gain low I need high gain 😫 espically doing streams ahhhhh 41
@weareevoaudio
Жыл бұрын
The 58dB gain range should be enough for most applications with the EVO. If you need just a little bit more then an external boost, such as a Cloudlifter can be used with the EVO 4 to give a little extra clean gain.
@MrNanpaps265
Жыл бұрын
@EVO by Audient to power a shure mv7b apparently your analog gain is under 50db and which is sad I like the product especially at the price range and don't want to buy cloud lifter yet as beginner streamer.
Пікірлер: 170