I very much like the demonstration of calm and analytical wrenching. No tools tossed around the shop. No foul language. No whining. Just getting to work! This is just another aspect of why I like this channel so much. You do your best to provide a good example of the right way to get stuff done. There are a lot of 'pros' that could learn those lessons too.
@danhunik7949
Ай бұрын
Well after the tantrum and wrench tossing you are all pissed off. Now you have to find your wrench and still need to fix the problem. Squatch has the best method. Just calmly fix the problem.
@markfischer5569
Ай бұрын
I like the father-son dimension as well. Seeing two minds at work on a challenge is helpful.
@charleswelch249
Ай бұрын
I'm thinking you are correct about it being an exaust seat. Makes sense with how the tick showed up when warm. Sr. Is definitely knowledgeable on the old tractors.
@madsonicboating
Ай бұрын
I do some of my best repairs after a few cuss words and venting :-D
@danielbutler578
Ай бұрын
Getting angry, cussing, and throwing wrenches doesn't do any good and you have to find where you threw the wrenches before you can find the problem and fix it. It's just a waste of time and energy.
@mattdanger-ny
Ай бұрын
I would love a video of senior explaining how he goes about tuning & timing the distributor & carb on first startup.
@user-mj3kl2cy8d
Ай бұрын
Yes This would be great!
@Radiotexas
Ай бұрын
That was The Master at work! Many years of experience and a good ear! For those of us Senior's age it is a blessing he can still hear well enough to do that!!!
@WeeShoeyDugless
Ай бұрын
@@Radiotexas I was very surprised Toby didn't use the 'screwdriver to the ear' method of identifying the source of the tick. As you say, your ears are the best diagnosing tool of all on old machinery and the screwdriver to the ear is a great help👍🏻👍🏻🏴🇬🇧
@KStewart-th4sk
Ай бұрын
WELL, it sounded worse when Senior turned the distributor CCW just before Squatch drove it out the door. That part really surprised me. It isn't that hard, all you need is a good ear. A carb always has a basic setting too for starting before you fine tune it after warm-up.
@danielbutler578
Ай бұрын
It used to be quite common to set the timing and carburetor by ear. The old cars that I had in my 20s were worn out enough that timing them with a timing light was a waste of time. When I listened to the engine and set it where they ran the best without kicking back on the starter, they had better power and got better mileage. I had 3 cars that would start with a quick bump of the starter if they were warmed up.
@njseashorechas2698
Ай бұрын
What a beauty! Imagine buying one of those brand new off the lot in the 1940s -50s?
@joelindsey7889
21 күн бұрын
My dad bought a Farmall Super M at auction. The Super M was supposed to have about 5 more horsepower than the M we already had but it would not pull as much and smoked a lot. M has 4 inch pistons and Super M has 4.25” pistons. Some supposed mechanic had rebuilt the engine and used 4” M rings on a Super M piston. Corrected and worked as expected. Strong old tractors.
@joelknierim1456
Ай бұрын
The H jumped to life. Bummer that a noise showed up, but I'm confident the Squatch team will get it figured out.
@JeffMcHood-vl8nk
Ай бұрын
I love watching all of your videos from working on the tractors bulldozers and your new building
@lordcaptainvonthrust3rd
Ай бұрын
Thank you both for sharing, Squatch Love the honesty of your content 👍
@dougkubash8673
Ай бұрын
Definitely needs looking into! It's got two of the best guys investigating it!!
@slowride55
Ай бұрын
If it makes you feel any better Toby I’m in your exact shoes. I just completely restored my ‘58 350. Engine, T/A, paint, tires, you name it I did it. Went and mowed a little to break it in and blew the head gasket on cylinder 1. Now it has to come back apart right after I put it all together.
@user-hn2qq3eb8c
Ай бұрын
do you apply gasket maker on composite head gasket?
@slowride55
Ай бұрын
@@user-hn2qq3eb8c My felpro composite gasket said right on it “sealer and re-torque required” so I used copper gasket coating.
@danw1955
Ай бұрын
My guess would be the valve seat. If they're stellite seats, they have to be super tight on the exhaust side to keep them from expanding and then falling back out. Depending on how good the quality of the cast iron is in the head, it may not hold a stellite seat. I believe they have regular steel seats that will probably stay in better. You guys did a really fine job restoring that old H. I spent a LOT of hours on one of those when I was a kid, pulling a 5 ft. bush hog!😉
@hordboy
Ай бұрын
My rule is to put all tools away, tidy up, and have a beverage before a first start. This ritual keeps the gremlins away. Your shop looked very organized as usual, so I’m a bit mystified why this problem cropped up. Maybe you didn’t have a beverage?
@joerice297
Ай бұрын
I bought a 1942 M with a transmission whine, wanted it fixed and had our local trusted shop go through the rear end and refresh some stuff. Still has a whine to it. Brought it home and pulled it in the shed. Went to back it out the next time and felt a binding. Bull gear spat a drain plug out that definitely didn’t belong to my tractor out through the rear case. So back it goes and somehow this plug evaded being seen by the shop twice. They had a left over M transmission from years earlier that they frankenstined together to make a new housing and internals… still has a whine to it. Im gonna assume its just 80 years of wear and tear tiredness and new gears that aren’t 100% meshing to eachother the right way
@squatch253
Ай бұрын
That’s exactly what it is, old straight cut tooth gears that all have wear, and when you mix/match them like I did here it’s always a gamble whether you’re going to make things worse or better lol
@WeeShoeyDugless
Ай бұрын
We were very fortunate with our '42 H as she had been hard worked in the woods and road work through a very long period of time. My dad was a stickler for changing all the fluids before book intervals, he always impressed on me that "oil is a cheap mechanic". When my brother restored her, he replaced all the bearings but the gears were in excellent shape.
@michaelshingleton1628
Ай бұрын
Yes I agree the valve seat insert lossened up sounds like most likely. But do not count out a slipped valve guide. Pressing on the valve directly softens the hits of the valve head on the valve guide.Exhaust really should have tightened up an insert as the exhaust seat would be running much hotter than the head. So the insert should have expanded and tightened up. Slipped valve guides are really common now a days especially in mopar v-8's and Kohler and Briggs engines lawn tractor engines. Guides are known to loosen when the head heats up. Not experienced with an H engine as these valve guides could be ones that have a step that will prevent the guide from dropping down and hitting the value head. So my thoughts may not apply. Just trying to help. Now the question is is there a valve guide insert that is slightly larger in od? If not you maybe having to get a new head. Fixing a valve guide is easy as you a machine special valve guides. I have done this many times making special custom valve guides. There are no early model gravely valve guides so I make my own. I am hoping it is a slipped valve guide.
@rongrace6324
3 күн бұрын
First tractor I drove was a Farmall H. yours sure looks good
@mikewednesday8541
Ай бұрын
Great update! Interesting to see what develops! Good Luck👍🏼
@kenhawkins1033
Ай бұрын
Some days you bite the bear, some days the bear bites you. Such is life.
@martyfaust1099
Ай бұрын
An old mechanics trick to find that pesky noise…..take that large flat blade screwdriver blade and put it on the suspicious area. Put you ear on the other end and odd noises could be revealed . Maybe put your palm between your ear and the handle end. Great for finding bad generator bearings. Hope you find the issue.
@BareKnuckleBinder
Ай бұрын
Master class in tracking it down! While it’s frustrating to spend all that time getting something perfect and then a wrong sound pops up, it’s ALWAYS best to catch a valve seat “going rogue” early!
@andyhuckle
Ай бұрын
watching you and SR work this through is great
@Recommended_by_Fred
Ай бұрын
Happens every time when you paint something.... you have to take it apart. I think the Farmall has been taking some pages out of x231's book.
@johngibson3837
Ай бұрын
Poor thing has been parked up next to christen for too long
@danielgriffith7694
Ай бұрын
May I suggest a different gear oil to quiet the gear train ? A company called Redline, makes a gear oil that is called shockproof. The one I use in my Harley is Shockproof Heavy . It’s about as thick as 40W But has an SUS rating of 85-250. It’s incredible how quiet and smooth shifting it makes an older Harley Davidson Transmission. You won’t be disappointed 👍
@jacilynns6330
Ай бұрын
We encountered a bad batch of hardened seats a few years back. After a few years of running they would self destruct. Didn’t mess up engine, pistons got a few marks but the heads had to come off and get redone. $600 later we got them back. Wasn’t fun since it was a customers car that was stored and he wanted to sell it.
@signalcar
Ай бұрын
Great to see the machine back in action after all the work, amazing to see the veteran tuning the machine like a musician tuning without an instrument!
@GaryT1952
Ай бұрын
Well, ain't that a kick in the nuts after an incredibly thorough rebuild
@spyderman1964
Ай бұрын
Interested to see what you find. Bummer that you have to look.
@vanislescotty
Ай бұрын
Oh my, the joys of old iron. Hoping it all goes well.
@aserta
Ай бұрын
Like there was any doubt it would start. Nice job!
@littlejason99
Ай бұрын
Sorry things didn't go as planned. At least on the positive side we know what a couple of the upcoming videos will be!
@Lee78072
Ай бұрын
When you walk around the Tractor in the first minutes.....damn.... does that Red Shine.
@anthonyhoult152
Ай бұрын
Good morning Toby, is was brilliant how the 'H' jumped straight into action but then when that tapping started my thoughts were has something come loose. what ever that noise is I have every confidence that you and senior to sort it out. I keep meaning to ask about the seat as noticed that you haven't got the red and white striped seat on. Although I can just imagine a permanent dirty hand mark on the white stripe.
@squatch253
Ай бұрын
That’s why I switched it out for that canvas upholstered seat, to avoid having that bright white strip across the back 👍
@KennyKizzleRustyNutzRanch
Ай бұрын
I had the same thing happen in my M. What happened was the head was cracked under the valve seat, in a circular pattern with the recession of the valve seat. When the engine got a little warm, that crack would expand and drop the valve seat onto the valve head and it would hang the valve open. With a borescope you could see it hanging like a wedding ring on a necklace.
@squatch253
Ай бұрын
That’s what I’m afraid of, but I’m still going to try a “Hail Mary” last ditch attempt at an easier fix first lol 👍
@donteeple6124
Ай бұрын
@@squatch253 Might as well warm it up, borescope it and see what ya got. If indeed the head is cracked under the seat, At least then you will have options to choose in how to remedy the problem.
@Nicksvintageiron
Ай бұрын
That paint is so nice it almost doesn't even look like cast iron in spots
@donwilson6617
Ай бұрын
No smoke No rattles No knocks Great Work
@narcissistinjurygiver2932
Ай бұрын
yep. 29th year as a mercedes mechanic. still get that fear feeling when I go to start after a big repair. glad to know I am not alone.
@squatch253
Ай бұрын
Yep the first startups mostly go well, but when they don’t - they REALLY don’t lol 😂
@narcissistinjurygiver2932
Ай бұрын
@@squatch253 at the dealership many times another tech would creep up and start banging the car on start up to scare the mechanic
@geneguenther4325
Ай бұрын
Thanks for the update Toby! Nice to hear Preparation H running. Boy that seems just like my luck with that happening just like last night I had no water but ended up being a starter compositor was bad so en easy fix. Hope it’s nothing major for you. Can’t wait for the next video!
@charleslund453
Ай бұрын
Sounded so good when first started. With that much work done to the engine one never knows what it is. I hope it is nothing to serious. I chased a noise like that on my 1945 M. Lucky for me just a valve setting. Hope you find an easy fix. Really do appreciate how you handle it. Many lessons for many years lessons you have learned. Thanks.
@DohosanV
Ай бұрын
Wish I could say that this is unexpected but preparation H holds true again. Pain in the back side
@matthewhensley9164
Ай бұрын
That thing is beautiful man! Hope you get that tick figured out and gone. I just finished tearing down a 1942 H and slowly starting from the rear working forward.
@frritter8253
Ай бұрын
My first thought is...what tick, ha. You guys, besides teaching the master mechanics, have way more patience than I do. Sorry for the problem, but it makes for a good lesson for us viewers - thanks for sharing Toby.
@Adventures_with_Josh
Ай бұрын
Wonder if you Could pull a plug and bore-a-scope the valve seats before tearing apart. Awesome to hear it run again tho, I know you and senior with get it figured out one way or another fingers crossed its nothing crazy.
@squatch253
Ай бұрын
That thought crossed my mind, but the valves are quite a ways up above the spark plug hole because the combustion chambers in the head are pretty deep.
@RangieNZ
Ай бұрын
@@squatch253 A lot of the borescopes come wiith a 45° mirror that fits of the end, to look sideways. The really good borescopes have a steerable end that can move like a snake and point nearly anywhere.
@WeeShoeyDugless
Ай бұрын
@@squatch253 Draw the manifold off her, Toby, and spin her over with the handle and the plugs out. You just might be able to see in through the ports if an insert has dislodged?
@Taxpayeroftherepublic
Ай бұрын
Appreciate your diagnostic approach. All the best!
@TractorHoarders
Ай бұрын
I always enjoy hearing an engine come to life after a rebuild. It's disappointing to have to disassemble again, but I sure appreciated your methodology for troubleshooting and it sure makes sense. I'll be interested to see if you confirm your suspicions. I'm sure you and Sr. will have it resolved quickly.
@Allthingsbroke
Ай бұрын
I dread first starts as well, 15 years a mechanic and I feel the same as you about it. I’d get a borescope in there and confirm your theory but that was my first thought once you found it went away and came back.
@JohnWaz-u1f
Ай бұрын
Consider using a stethoscope to locate the louder/shaper tappet in the rocker arm, valve seat, valve lifter, camshaft … areas.
@robertmailhos8159
Ай бұрын
Now I see why you needed the new building so you don't have to take the muffler off the exhaust system plus not having to duck when you are going in and out of the old shop
@squatch253
Ай бұрын
Yep, the tallest machine I currently own is 10’ so I went up to a 14’ high door to have room to still grow lol 😂👍
@robertmailhos8159
Ай бұрын
@@squatch253 cool beans 🫘 fun part is getting the concrete poured and properly finished from the size of the building it's going to take alot of concrete other thing is will you have it colored or leave it plain looking plus having power ran into it
@markhelseth253
Ай бұрын
It popped off after only a a couple revs. Amazing. You did a great job on 2924 pieces - it was only the 2925th that caused a problem...and maybe that piece was out of your control. Sounds like you're on the hunt and will get it to ground soon. Good luck on the fix. Hope to see you at Nowthen.
@Thomasgarrick113
Ай бұрын
Might be the valve seat had it happen on 8 hp briggs exhaust pricked seat bore with punch JB welded back in and flat punched around top edge ran another 8 or 10 years on wood splitter finally just wore out replaced with a 12 hp good luck interested to see what you find
@AndrewHCann
Ай бұрын
Excellent video Squatch 253 SR , JR I say hope it simple fix of bit adjustment to engine and transmission quiet down too more use it plus tweak of adjustment too!
@RobertBrothersJr-dc7nr
Ай бұрын
I feel for you Toby. I hope it’s an easy fix. My fingers are crossed for you. Other than the tick she runs great. Enjoyable video. Thanks
@drbill44
Ай бұрын
Being that the noise comes and goes after it warmed up I’ll be optimistic because it’s the exhaust valve and say the valve is sticking due to too close of tolerance between the guide and stem. Either way the heads coming off.
@wrenchingwithrob6001
Ай бұрын
You just never know what could happen during those first starts. In the airplane world, I would be tempted to look at the seat with some type of fiber optic scope just to verify the “smoking gun”. I’m holding out for something simple though. Love the channel!
@bigears4014
Ай бұрын
Put a timing light on the valve springs you can pick up faults like that
@amos4457
Ай бұрын
Nice work on tractor you have done a beutimous job on the tractor don't let this little problem defeat you I know you'll gfigure it out. I would get one of those cheap horoscopes on the jungle site an take a peak in that cylinder.
@jasonwhitler4167
Ай бұрын
It’s a little bit comforting to know you guys have the same feelings about first starts that I do. I pretty much start shaking every time I do something like this! Good luck troubleshooting the exhaust valve. I’ll be interested to know how the machine shop fixes the seat if that is the culprit.
@squatch253
Ай бұрын
Thanks, yeah most times these first startups go well, but when they don’t - they REALLY don’t lol 😂
@MC-re2ry
Ай бұрын
I've been there. Call me weird but figuring out stuff like a mystery tick or knock is actually part of the fun for me. Aggravating up front but really satisfying in the end.
@brembodream
Ай бұрын
Love your videos🤩 Hope not the tractor punish you with the valve seat problems because of the orange peel paint job 😬 You better hurry up sand and buff that orange peel away 😄 Best Regards from Oslo Norway..
@jeffmc7946
Ай бұрын
Looks good! Hope it isn’t a major issue! You had it in the shed next to the Christine!
@cudasteve
Ай бұрын
I would get the boroscope out and have a look through the plug hole and watch the seat as you turn it over by hand. If it is as loose as you mentioned with the occasional dull thud, then you will be able to see it dropping.
@Lee78072
Ай бұрын
Must have been a Majestic Feeling when you first time drove it after all the Work.
@curtbush75
Ай бұрын
Good to see that your eyes are better now
@squatch253
Ай бұрын
Thanks, I had my 6-month retina scan checkup yesterday and I finally got the green light to go back to all the activities that I used to do 👍
@ericperreault5911
Ай бұрын
very cool to see it running
@BoysInTheWoodsofPA
Ай бұрын
You must really love to paint, beautiful work. I don't have that touch. You and I used to talk about snowmobiles back on ACMOC years ago, JoeG from NW PA. I just found your channel. It sounds like a seat to me too, should be an easy fix.
@squatch253
Ай бұрын
Hey JoeG 👍 I remember you from the ACMOC forum, I’m still Sasquatch over there. Good to see you again, I’ve also got quite a bit of Caterpillar content compiled in organized playlists on the main channel page here if you get tired of the Red tractors lol
@BoysInTheWoodsofPA
Ай бұрын
@squatch253 I am sure I will get around to looking at all, lol. Great content from what I have watched.
@tcmtech7515
Ай бұрын
Is there some sort of building code that says that every shop main door has to have another building right in front of it? I see this everywhere. Big open yard, nice big workshop and some other buildings right out the main doors to the shop.
@squatch253
Ай бұрын
That old yellow shed situated right out that back door is going away soon, its replacement (that newer blue shed right behind it) is already on site 👍
@WeeShoeyDugless
Ай бұрын
My 1st thought was a sticky cam follower but it's an unusual one, Toby. I must have missed the episode where you mentioned the head having new valve seat inserts and when you mentioned that, I thought, aha! Very possibly a dropped insert as you say. Man, that transmission is not happy either, hope it beds in a little in time 🤞🏻🤞🏻 🏴🇬🇧
@squatch253
Ай бұрын
Thanks, yeah I’ll be taking those noisy gears out again too - after getting the engine noise sorted first 👍
@chrislucas4065
Ай бұрын
Guess if the valve seat has gone awry you'd see lack of compression in that cylinder or increased tappet clearance on the affected valve.
@lifeafterourloss
Ай бұрын
Ugh, sorry Toby. Hopefully this is just a minor speed bump. We are at the same point with Lefty right now and the word nervous is a tremendous understatement! 😳
@danielkundert4167
Ай бұрын
Nice work on that old H. Bummer on the tick. At least it is on the top end.
@ron827
Ай бұрын
Great troubleshooting and I will be surprised if you are the cause of the ticking sound.
@michaelodonnell1855
20 күн бұрын
Found a propane tank car in Plainville CT With sqautch signed in cursive. I wonder
@napolimichael1
Ай бұрын
Absolutely love that sound!
@guns-and-games5371
Ай бұрын
Bent push rod? collapsed lifter, maybe a spring is cracked. this is the first video i watched of the series so i dont know if you replaced those during the restoration.
@shaneharrison4775
Ай бұрын
Good first start It very well could be a insert loosening up under heat it's not likely they het up the heads when they placed the inserts in and pressed them into their recessions. Still they shouldn't be to bad and they may wear in.
@jcgabriel1569
Ай бұрын
Looks like "Christine" had been giving "Preparation H" some tips... Still, hope you would be able to find the culprit and fix it...
@Thomasgarrick113
Ай бұрын
Quick thought check valve lash with it running and ticking on that one valve if it is way loose then you know its either a loose seat or something stuck on valve strange it is intermentant noise
@dougjones9493
Ай бұрын
The threat of being opened up. That's why you don't use rtv unless it's really necessary.
@madsonicboating
Ай бұрын
man i love your vids! What a wee beauty she has turned into and what a bloody shame about the noise! Awesome work anyway!!!
@brycewiborg8095
Ай бұрын
Did you hold off on putting antifreeze in to avoid potential leaks on the new paint ? I've made that mistake. In the late 60s we evidently couldn't afford antifreeze. All summer we ran water. During autumn we drained two tractors every night. We caught the water, and carried it into the basement for re-use. High lime content on the farm. The 6 volt batteries spent the winters in the basement on a board. My folks were a product that the depression. Tussen Takk !
@squatch253
Ай бұрын
My own personal rule is to just fill with antifreeze every time, to avoid the big “whoops” of forgetting to drain before it gets cold outside. Although I called it “water” here, it’s always antifreeze 👍
@davidvogel6359
Ай бұрын
@squatch253 that is the best way so there is no oops I forgot this or that. sorry things aren't perfect the first time.
@deweydodo6691
Ай бұрын
Time for a little camera scope in the spark plug hole
@williamsimeone5623
8 күн бұрын
Have you ever spoken to Pete on Just a few acres, he has rebuilt several Farmall tractors.
@squatch253
8 күн бұрын
Pete and I know each other 👍
@michaelshingleton1628
Ай бұрын
Oh you might look at the tops of the valve guides and compare them to see if they are all at the same level or is one lower than the others. If it is a valve guide I would have all pressed out and pressed back in with locktite sleeve locker. Just a friendly suggestion,
@jmailbell
Ай бұрын
Why experienced mechanics hates first startups!
@squatch253
Ай бұрын
Yep, they mostly go well, but when they don’t - they REALLY don’t lol 😂
@danielbutler578
Ай бұрын
We really want to remember the good first starts but we can't forget the bad ones no matter how much we try!
@barrywhitley2535
Ай бұрын
Looks beautiful well done.
@samshambles391
Ай бұрын
More suspense! I love it! Oh, and also bummer. (Can't wait for the next episode!)
@shifty4277
Ай бұрын
Well hopefully you find something else before you have to take the head off! Tractor is looking beautiful keep up the great work
@squatch253
Ай бұрын
Thanks, yes I’m currently working on a last-ditch “Hail Mary” attempt at fixing the noise before having to pull the cylinder head back off- stay tuned! 👍
@steamfan7147
Ай бұрын
Well darn, that's the way the ball bounces sometimes. Seats always worry me, they gotta be done just right, or there will be issues, usually expensive and time consuming ones.
@WrenchHead
Ай бұрын
Tough break. Can you bore scope through the spark plug hole to confirm your seat suspicion?
@rickharper6320
Ай бұрын
WELL-L-L-L-L As my dad used to say after a long sigh ….. PLAN B !!!! At least it is just one valve & not all eight !!! It has to be something relatively minor !! Valve seat, valve guide, rocker shaft shim or bad spring, rocker arm face, cam lobe, tappet face, push rod the list goes on. One of those situations that when you do find it, you will say OF COURSE, why didn’t I do that FIRST !!! Does this engine have valve rotators ? Had one of those drive me nuts until I replaced them. Intermittent ticking at idle. Would go away mid throttle when oil was abundant.
@squatch253
Ай бұрын
Thanks, and yes I’m currently working on eliminating that rocker arm as a possible culprit before going any deeper 👍 And no, this H does not use rotaries but fun fact of the day - the later Super H heads and valves used them.
@Walter-ky7mh
17 күн бұрын
Sound good, just like the one I did in 1975
@sepresley1
Ай бұрын
paint job looks great
@gregorymacneil2836
Ай бұрын
Great Video! Glad it started!
@boruff68
Ай бұрын
Well, If you DO have a valve seat that came loose, at least nothing got dropped into a running cylinder,and trashed the entire deal..... Better to catch this now ,than running it hard later and finding out the "disaster" way.... :/ Good luck guys..
@ericsargent4551
Ай бұрын
Great video!!!! Thank you for sharing!!
@sterff8990
Ай бұрын
Well that stinks. This is part of the reason I don’t like painting my tractors. Every time something goes wrong you have to take touch up the paint. Between you and Sr, I’m sure you’ll figure it out!
@squatch253
Ай бұрын
I’m right there with you, the older I get the more I like my “patina tractors”. You can have a lot more care-free fun with those and even perform repairs without having to worry about a thing lol 😎
@76RSLT
Ай бұрын
Aww man, that sucks. Hopefully it isn't too terrible news. I'm sure you will let us know either way.
@gallagher68
Ай бұрын
I was expecting the stethoscope to come out, or at least the farmer version, a screwdriver to the head bolt and the handle to the ear. I have found many noises with that 'stethescope'.
@BillTheTractorMan
Ай бұрын
Thanky you for sharing!
@andrewmurton8379
Ай бұрын
Another quality no holds barred video though I’m sure you edited the expletives, I know that after all the immense amount of work you’ve put in to then have a knock which looks like a failure of a part that you had no control over must be soo frustrating. Mind you whilst this is awful for you and senior it means that we get bonus footage though we feel you pain.
@bigbadwolf1966
Ай бұрын
Before pulling down dismantling, do you have a bore scope that you can poke in a plug hole so that you can watch that valve & seat as you manually open and close that valve.
@Curtislow2
Ай бұрын
Just needs a little more Preparation H on Cylinder #3.😂
@theskepticalnegativist1004
Ай бұрын
That fear has kept me from mounting hardened seats in my volvo b20 engine. It's built, stroked and revs to 8500rpm. Just the idea of a loose seat makes my butt pucker. I have friends that had it happened, and that on stock engines. heads was scraped. A new ported and full out race head like mine is about 2000$ in sweden sooo.
Пікірлер: 265