Engine sounds great 👍 Lots of power for that quite light FG 👍
@316RC
2 жыл бұрын
Yes it is. It’s really gonna be something ⛽️💥⛽️💥
@djcin1000
8 ай бұрын
you forgot to set fell safe on remote brakes to stop car if lost any kind of power to the remote brakes will lock
@linzitazim
Жыл бұрын
Cool marder I had the 27.2 OBR fullmod. Good engines
@jspeedrc
Ай бұрын
Great sound👌🏽
@soblessed6438
2 жыл бұрын
Hey Allen car looks and sounds really good!
@bluegroovemodelsports9650
2 жыл бұрын
Great sounding car
@316RC
2 жыл бұрын
Yes, everything is good. 1st start is always a little nervous
@islandrc-duke1972
2 жыл бұрын
cool rc,sounds awesome
@316RC
2 жыл бұрын
Thanks, always nervous on that 1st start 😀
@bluegroovemodelsports9650
2 жыл бұрын
Nice build Al
@316RC
2 жыл бұрын
Thanks 👍🏻
@scottsimpkins9993
Жыл бұрын
Lovely buggy 🇬🇧🇬🇧
@eastsiderc
2 жыл бұрын
Nothing wrong with Sunoco its great fuel I use both VP and Sunoco 112 its the money fuel!! Its sounds good brother !!
@316RC
2 жыл бұрын
Smells good too 😛. They sell the 112 Sunoco at the pump about 45 minutes away. So I’ll take a trip there every so often and pick up 5 gallons. Thanks for watching brother. Tell Braap mom happy Mother’s Day 😃
@geejayrc9401
2 жыл бұрын
Nice. That will be killer in the little Marder. What gearing you running in that
@316RC
2 жыл бұрын
Right now I have the stock 19/46 in there for break in. After that I have a 44 spur and several pinions to play with.
@crashbash5554
Жыл бұрын
How has that obr 30.5 held up over this past year? I'm looking @ thier 29.5 or 30.5 for my 30dn dtt-7.
@jarviscrawford7194
3 ай бұрын
Did that motor fit straight in did u have to make any adjustments will u sell it ?
@316RC
3 ай бұрын
No adjustment needed other than I had to replace the clutch housing on the OBR engine to a Zenoah FG housing. There is a special notch cut in the FG one because of the way the clutch carrier mounts.
@bluegroovemodelsports9650
2 жыл бұрын
That little FG should be fast on that setup....
@316RC
2 жыл бұрын
Yes should be 😜 fast ⛽️💥
@BlazerNL
Жыл бұрын
Would love to see this run
@316RC
Жыл бұрын
Soon!
@donwoodruffii3943
Жыл бұрын
Did you use a discount code ? If so what was it ?
@valeriocicchetta1774
Жыл бұрын
Dove si può comprare quel tipo di scarico?
@benjaminsermot3872
Жыл бұрын
Hello What's the whells? What's the exa? 24mm? Thankyou
@316RC
Жыл бұрын
MadMax tires & wheels. Mine are FG square but also available in 24mm.
@Serialcrasher
Жыл бұрын
Running video of this beast soon 3:16 ?
@316RC
Жыл бұрын
Eventually I hope 😯😯 A lot of life stuff has gotten in the way of RCs unfortunately.
@user-vt7jw1cs1d
Жыл бұрын
Where can i bay parts for the FG marder?
@316RC
Жыл бұрын
DDM or RC car online
@mrboostification
Жыл бұрын
Do you like the tires?
@316RC
Жыл бұрын
I do they work great on pavement and hard pan.
@robertdean3974
Жыл бұрын
what pipe is that??
@316RC
Жыл бұрын
DDM Dominator. You must slightly modify the Marder body to use this pipe. www.ddmracing.com/DDM-Dominator-Chrome-Pipe-for-FG-2WD-4WD-Offroad-Vehicles-DDM001
@robertdean3974
Жыл бұрын
@@316RC yes thank you will be getting that in 2 weeks I see they ship to uk aswell! Can you tell me what part do you need to modify? Would the carb need jetting after fitting it?
@316RC
Жыл бұрын
@@robertdean3974 The body will need some trimming where the pipe will come in contact with it. I trimmed mine and then put some metal tape on the inside to protect the plastic. No need to do anything with the carb. What engine and carb do you have now?
@KHeidendal
Жыл бұрын
Running in a new engine? Let it heat up to temperature and drive a few laps, let it cool down for 15 minutes. Start the engine and drive around en let it heat up. After its warmed up just rip it.
Пікірлер: 40