Seeing the completed part would of been great. Just wasted my time
@JOEGGGJOE
7 жыл бұрын
he must be high as a kite with no mask inside.
@miguelangelhernandez7029
7 жыл бұрын
thats his pay
@cyberblade6669
7 жыл бұрын
you get use to it
@cyberblade6669
7 жыл бұрын
check my stuff out
@THOMASTHESAILOR
6 жыл бұрын
No mask, No Gloves, No Ventilation. Welcome to the 3rd World.. Life expectancy is short..
@craigjones9244
5 жыл бұрын
Its only poly it wont hurt
@cyberblade6669
7 жыл бұрын
do a video on you plug making please your flanges look good
@binzpaul
6 жыл бұрын
First we do a wooden plug by cnc machining with flanges. Then a mould from it. There upon a plug like the one above is made from the mould.
@cyberblade6669
6 жыл бұрын
i just glass on glass sheets but have a cnc plasma cam - wood cnc table thanks for the idea
@ManojSahoo-ib9tn
6 жыл бұрын
sir kam he
@rigormortiz9114
4 жыл бұрын
What did you use on tissue lay up. What do you call the mat or "tissue" you use? Thanks brother.
@binzpaul
4 жыл бұрын
We used ISO resin on for tissue layup with sponge roller. It's called tissue mat, surface mat or surface tissue etc..all same.
@rigormortiz9114
4 жыл бұрын
@@binzpaul Thank you bro.
@paulhowlett3690
5 жыл бұрын
What about the pva release and how he releases the mold ??
@biff1tannen
4 жыл бұрын
Use 7 coats with mold release wax. 1 coat, then wait 30 min,and so on. Honey wax it called.
@brandonstimpson5497
4 жыл бұрын
Looks really glossy I imagine honey wax or tr210 or a system like chemlease ect
@suprarune
8 жыл бұрын
where is the rest of the video ?
@subver6787
6 жыл бұрын
suprarune just let the fiberglass dry
@madsciencetricks2297
6 жыл бұрын
no audio?
@craigjones9244
5 жыл бұрын
Brotha get some plastic on the frame and floor or that nice new factory wont last long.
@diegojimenez2905
7 жыл бұрын
What resin do you use??
@binzpaul
6 жыл бұрын
Vinylester gelcoat n ISO resin
@craigjones9244
5 жыл бұрын
He's using poly
@craigjones9244
5 жыл бұрын
Whoops my bad
@StairToFuture
4 жыл бұрын
i want materials
@itssaurabh7404
4 жыл бұрын
I think it is csm 250 for tissue coating And gelcoat is made up of resin collor pigment and cobalt and hardner
@brandonstimpson5497
4 жыл бұрын
Curious why he wets the mould first then adds tissue , far easier to put you tissue down while the gel is 'tacky' No gloves on baffles me ..catalyst is a bastard if it gets on skin same as resin ....
@THOMASTHESAILOR
6 жыл бұрын
Half a video ? wtf ? I'll bet it came out like shit.. So, they didn't want us to see the unhappy ending
@subver6787
6 жыл бұрын
ThomasTheSailor Chubby just let it dry. That is the second half
Пікірлер: 36