I run the mt baja boss 35x12.5 on my 20x12 and man everyone that gets in my truck are surprised of how smooth and quiet these tires are i definitely reccomend them if you are looking for an aggressive look and a quiet smooth ride
@hottaters9124
2 жыл бұрын
Can you do a video on these “square” setups? I dig the look a lot, keep up the great informative videos👍
@darellhunter2205
2 жыл бұрын
Running 35x13.50 on a 24x12. Really like it on a 6" lift. I ran a 33x12.50 on a 22x9 when I only had a level. Really wish I would've done a 10 wide but it was back when I was a wuss and scared to trim. Lol. Now, I'm like cut what you need to make it fit. Hahaha. Great video guys.
@fishwalleye9517
2 жыл бұрын
I'm running 22x12 on 33s on a leveled f150
@darellhunter2205
2 жыл бұрын
@@fishwalleye9517 Whoa, you went full send! Lol! I bet it looks awesome tho!
@khyzalbruntjr6715
2 жыл бұрын
I’m running 22x12s on 35s, on a 3” leveled Escalade. Couldn’t be happier with the way it looks 👍🏽
@HTSS8
Жыл бұрын
It's cool that you're talking about tires not letting rims get curb marked, but hey, use some MacGyverism to get it exactly. If you want to not eyeball it for the sidewall bulge protection measurements, get a yard stick or just a 2x4 that's 40" long (anything flat long enough to cover the tire diameter). Press the yard stick or 2x4 standing up flat against the tire, then do the same tape measure from rim edge to the yard stick etc. And there you have the exact number. Then even better, sandwich both sides of a tire and wheel setup with 2 tools as described, and use that to get not just tread section width but a literal overall width sidewall to sidewall no matter what, so you have exactly what width setup is visually on the truck.
@dirtbikedude1334
2 жыл бұрын
I remember when fuller did these and he made a 35 look like a 40 😂😂😂
@CustomOffsetsTV
2 жыл бұрын
Always the best! Makes your truck look bigger!
@AaIsForAaliyas
2 жыл бұрын
Arkon set on the far left with the tire set up.... Just perfect
@ZK_Wright
2 жыл бұрын
I got my hoodie today and may I say it’s the most comfortable thing I’ve ever worn!!
@CustomOffsetsTV
2 жыл бұрын
Hell yeah man !!
@JDMImportz1
2 жыл бұрын
Instructions not clear took off my 22x12 -44 forces wrapped in 305/40 venom XT (which rub & truck isn’t leveled) and bought 24x14 -76 forces wrapped in 33x13.50 venom RT’s 😅 im here for a good time not a long time!
@CustomOffsetsTV
2 жыл бұрын
That’s the way to go! 😎
@jeffshultz3883
2 жыл бұрын
Thanks for the explanation. I was thinking of moving up to 22s. But that's pointless unless you really like the lower sidewall. And I don't!
@micahbowen184
Жыл бұрын
Just ordered the Arkon Lincoln in 20x10.. can't wait!
@nitetrain7136
2 жыл бұрын
Looking good with your new mop chop junior. I had new Amp Attack MT 37x13.50’s on 24x14 Arkon Lincolns put on this past Fall that I ordered from Arkon off-road. I already had previous metal/plastic trimming from my 37x12.50 on 20x10’s. I’m running bushwhacker pocket style flares and even with extra metal and plastic valance trimming for this new wider setup, I’m still experiencing a lot of tire lug catching going forward or reverse. My setup is a 6” suspension (and a 3” body) is what was added before my new install. My truck is a 2017 Ram 1500 Sport. I’m probably gonna remove my bushwhacker flares this summer when I take my truck out of winter storage as I live in snow county in upper Michigan lol. This should eliminate some thickness behind the tires I’m hoping. But then I’m wanting to run aftermarket wide trucker mudflaps. So not sure if I just have to run them on the back of my truck if they might cause rubbing on the front. I thought I wouldn’t have any issues adding the 3” body, but she still rubs. Thanks
@tamonthompson7599
Жыл бұрын
Arkon Caesars 20x12 wrapped in nitto nt420s
@bigguy1403
Жыл бұрын
Awesome video bro 👍👍
@stevenskoog
2 жыл бұрын
This couldn’t have been better timing 😅
@yeralvidal2360
2 жыл бұрын
Same
@jadinwhite3126
2 жыл бұрын
Yea dude same haha. I want 35 12.5 and 20x12.
@mexican8940
2 жыл бұрын
I’m doing 35x13.5 on 20x10’s with a 6 inch lift. I hope it turns out ok🙏😬🥴
@jamesvolpe2186
2 жыл бұрын
I just ordered some 40×15.5 ×24 TOYO OPEN COUNTRY MT tires last night from you guys. Going to look good on my American Force wheels
@CustomOffsetsTV
2 жыл бұрын
Hell yeah man! Cant wait to see the setup!
@leadpilled5567
2 жыл бұрын
Should have shown a 35 on a 17X9. It’s a killer look. I wish lift companies would make lifts that will work with 17s
@GCharlesE
Жыл бұрын
This is exactly what I'm running on our new Bronco. 17x9 pro comp series 32 with-6mm offset. 315x70x17 Falken Wildpeak AT3W
@ernietorres6730
2 жыл бұрын
Can you guys pls do a video on offset comparison. Maybe do an interview with some of your customers that have uncommon sizes. To see what the minimum lift and trim needed.
@philliplange399
2 жыл бұрын
Love how he called them Freedom Units haha. That's what I'm using from now on
@CustomOffsetsTV
2 жыл бұрын
😂😂
@jyminewtron1416
2 жыл бұрын
Just bought a mint condition 2003 F150 FX4 super crew with a 3in level and lift. I have 18in wheels and 33x10s for tires now. I want to go up to atleast a 20in wheel with 33 x 11.5 or 35 x 12 tire.
@CustomOffsetsTV
2 жыл бұрын
Hell yeah! Can't go wrong finding a mint older gem!
@calebwood7658
3 ай бұрын
Would i be smart to do 20in tires and rims
@chinothedreamgiver1629
Жыл бұрын
This video was so helpful
@joduke3124
Жыл бұрын
Please do video on smaller rims with the stuffed look.
@leebo92_38
2 жыл бұрын
Can y’all do some videos with 18s maybe with some deep dish rims?
@terrellwinn343
7 ай бұрын
I have 2017 Ram 1500 with a 2.5 level kit running Fury 33x12.50x20 RTs- what size wheels would I need?
@floridaboymeech3442
2 жыл бұрын
Can you do a vid on how these different wheels and tires look like with a lift kit
@denorrisbowman138
Жыл бұрын
I have a 07 honda ridgeline looking to put some 20" or 22" rims and tires on it. without any lift kit. can you help me out on this? dont want them sticking out from truck.
@PowerstrokeSynd
2 жыл бұрын
22" with 37's TOYO RT
@Tcclark14
2 жыл бұрын
Could I use my stock 17 x 7.5 and put on 305/70r/17s and fit on the wheel?
@JWEHMEIER76
2 жыл бұрын
I am loving the 22x12 -51 Arkon Lincoln
@CustomOffsetsTV
2 жыл бұрын
They're so sharp!
@SrtJasper772
2 жыл бұрын
I’m trying to go DUMB wide on my ‘00 suburban 1500 any tips?
@CustomOffsetsTV
2 жыл бұрын
14 wides or 16 wides! www.customwheeloffset.com/wheel-offset-gallery?sort=yno&year=2000&make=Chevrolet&model=Suburban&drive=4WD
@SrtJasper772
2 жыл бұрын
@@CustomOffsetsTV the legend responded😍💕 bet imma add these to my wishlist
@SrtJasper772
2 жыл бұрын
Do y’all think throwing a 16 wide with 6” spacers is safe? I’m trying to barley fit in the driving lane😂😭
@rushtanto8671
2 жыл бұрын
Is there any video comparison on which one better big rims or big tyres
@CustomOffsetsTV
2 жыл бұрын
You can have both!
@rushtanto8671
2 жыл бұрын
@@CustomOffsetsTV nice..is there any link for that?
@kregadeth5562
2 жыл бұрын
The answer? Smaller wheels. It’s a truck. It doesn’t handle. Stop trying to make it handle. It’s not a car. Make it comfortable or you’ve done it wrong. Or make it tougher or you’ve done it wrong. Both are not bigger rims.
@Connor4x4
Жыл бұрын
Wrong!!
@JustMike989
4 ай бұрын
You dont own a truck
@JameGoFast27
2 жыл бұрын
I used to think tread was the little rubber hairs on the tire lmao
@michaellamontagne2470
2 жыл бұрын
Is there a 33 that’s more than 12.5 wide? I remember YEARS ago there were 33 15.5????
@CustomOffsetsTV
2 жыл бұрын
They make 13.5 and 14.5's now! www.customwheeloffset.com/store/tires?sort=instock&width_from=33&saleToggle=0&qdToggle=0
@jasoncasey5ify
Жыл бұрын
If your thinking 14 wide dont do it 12 is almost to wide 14 is just not right.
@STR8SICCC
2 жыл бұрын
*How about lowered trucks? You guys always talk about lifted but rarely lowered.*
@CustomOffsetsTV
2 жыл бұрын
Unfortunately we don't do too much of lowering vehicles, but we are big fans of 'em!
@STR8SICCC
2 жыл бұрын
@@CustomOffsetsTV I noticed, kinda wish you would!
@anibalresendezpulido
2 жыл бұрын
"freedom units" lol
@ShOwStOpp3rr
2 жыл бұрын
Im a little concerned here,,Junior seems to like measuring bulges 😆
@joshrossello6346
2 жыл бұрын
Day 122 of asking custom offsets for a company dually truck build
@darrylm3627
Жыл бұрын
🤣😂😄👍🏿he said "obviously 35" diameter is 2 inch taller then a 33" diameter."
@e-manpn1238
2 жыл бұрын
👍👍
@shrekion4246
2 жыл бұрын
Why get mud bloggers when. You can use tractor tires.
@larrybailey1896
2 жыл бұрын
Those are cheap to roll when gas is $5 a gallon...Ramen noodles and Natty Daddy .
@CustomOffsetsTV
2 жыл бұрын
A balanced diet!
@SpEcZ-
2 жыл бұрын
Day 159 asking co for black and milled davincis
@johncoleman1818
28 күн бұрын
It doesn't really look like any of those are actually for "off-roading"!
Пікірлер: 72