Clamps have the following advantages: - fit in tight spots, can be used to hang meter anywhere, make sure you measure only one conductor in a bundle, require 2 cm depth beyond the conductor, can take larger dia conductors, can hold in place multiple conductors when they spring.
@Robert-ug5hx
2 жыл бұрын
I have several of the meters , for most things I do they work fine
@christopherbalderston5228
4 жыл бұрын
Love the grey ceiling and can lights!
@TheDurbinCompound
4 жыл бұрын
Turned out awesome!
@rs6664
3 жыл бұрын
@@TheDurbinCompound I have these testers but when testing current I have to hold the wire at the top of the jaws then when I put it between the two lines it doesn't show a ready is this right?
@e.j.johnson7366
3 жыл бұрын
I have a t5-1000 but the volts setting doesn’t have a decimal place. To me that’s a big problem esp on DC systems with lower voltage. Difference between 12.5 and 12.0!on a car battery for example is substantial and not detectable by this meter
@RedIron1066
3 жыл бұрын
T5-600 is a pretty good meter for 90% of what needs doing.
@kingofthecrease30
4 жыл бұрын
i have this and use it every day...i keep it in my veto pro pac MB2 bag for quick diagnosis....my main meter is the Fluke 374FC....i only use fluke meters....the best 👍
@TheDurbinCompound
4 жыл бұрын
👍👍👍
@TheDurbinCompound
4 жыл бұрын
You might see something like that coming up soon on this playlist!
@jorbace
3 жыл бұрын
Thank you. Old school yeah!!
@filexflores5485
3 жыл бұрын
Thanks 👍
@patrickjacobsen7805
3 жыл бұрын
Was looking at the t6 vs t5 but I'm definitely sold on the t5 now cheers.
@s.n.9485
2 ай бұрын
can you attach a clamp on the back with a magnet? so you can attach it to a panel or something while taking measurements.
@mikeknoeber6507
4 жыл бұрын
I love my fluke, in my belt at all times.... At some point I will upgrade to T6
@TheDurbinCompound
4 жыл бұрын
Same here!
@andrewyek
4 жыл бұрын
@@TheDurbinCompound Hii glad you all love fluke. me too. btw, it is not just $100, here in germany it sold around 150 euro. can you tell me if this meter can be use to tell phase rotation of 3 phases wire ? i use dual pole meter for 3 phases rotation check.. i don't know if this t5-600 have the function or not. can anybody tell me. thx
@SlammedSierraCC
4 жыл бұрын
Yall go watch AVEs video on the T6. Unless they have fixed it its a death trap/lawsuit waiting to happen. I cant believe fluke allowed that thing to sell
@st6795
6 ай бұрын
200.00 now in 2024!
@michael7324
Ай бұрын
Semper Fi
@licha5050
4 жыл бұрын
good vid!! i just got one T-5 600
@ArkamasRoss
4 жыл бұрын
2:58 🤭☻ Seriously though, good stuff man.
@TheDurbinCompound
4 жыл бұрын
😂😂😂 quit it!
@efrencamacho1689
3 жыл бұрын
Do u recommend for an apprenticeship?
@TheDurbinCompound
3 жыл бұрын
Absolutely
@efrencamacho1689
3 жыл бұрын
@@TheDurbinCompound thanks!! 👍👍
@ArkamasRoss
4 жыл бұрын
One thing I've been trying to figure out is the three screws under the calibration sticker in the battery compartment. Anyone know anything about them aside from the obvious don't screw around with them? (It was intentional) I tried looking it up but being the irritatingly proprietary and Applesqe type of company that Fluke is, there's no information beyond offered calibration services with nothing but one link after another to their information-lacking pages. I'm guessing each screw is an adjustment screw for each test feature but it would be nice to know just what goes on there. I just like understanding the things I own.
@johnkaper1129
Жыл бұрын
Nice informative video, I like your flag in your front yard. Semper Fi, C1/1 0311
@TheDurbinCompound
Жыл бұрын
Kill kill kill!
@highvolts6620
3 жыл бұрын
Might be a dumb question, new to this, can you use this T5-600 to test a car battery. Or do I use multi-meter
@TheDurbinCompound
3 жыл бұрын
This is perfectly fine to test a battery. This is a multimeter. Meaning it measures multiply things
@bobaverbuch6424
4 жыл бұрын
Fluke t5 did not read the amps , any tips?
@TheDurbinCompound
4 жыл бұрын
Are you around only 1 wire?
@bobaverbuch6424
4 жыл бұрын
Yes
@TheDurbinCompound
4 жыл бұрын
I would try a battery replacement and if that doesn’t work, contact Fluke
Пікірлер: 35