Disclosure : I may be an affiliate of any product shown or tested here on the channel. It may have been free or given to me by a discount. Either way. It is my duty to you the viewer to give an honest, unbiased opinion on an item. I’m pretty straight forward. If something sucks I will let you know. If you choose to purchase a product from a link here I may benefit from a small commission. Or may not if it is a company who just sent it for a one time review. I don’t get paid for making a video. So to those of you who do support the channel I want to say thank you in advance. Please keep watching and I will keep up the great videos!
@EarthshipFreedom
7 жыл бұрын
yeah that is cool. thanks for the review, cant wait to see how the quad turns out.
@WildCaptures
7 жыл бұрын
I really like this it even has an OSD, so cool. Thanks for going over Beta Flight and BL Heli.
@successfullHuman
7 жыл бұрын
awesome tower! i love the simplicity of this board. Flys great also.
@nason43
7 жыл бұрын
That is a nice setup for small quads where space is a premium.
@magneto_fpv4156
7 жыл бұрын
I just got the Flycolor Raptor S Tower 30A It has Blheli S pre configured to run D-shot 150, 300 and 600.
@ritchozlothbrooke4907
6 жыл бұрын
Great information, so thorough and well executed. I have recently subcribed to your channel and I find it to be really unique, Well produced with the limited equipment that you have and straight to the point. I am wanting to purchase the raptor tower, though I have been thinking of a frame, I have two at home, though I would l really like to purchase the Armattan Rooster, and hook the Raptor on with that frame. Once again great video I will be keeping my eye on you for sure. Cheers
@ziggyzbeak
7 жыл бұрын
Thank you for the blheli lesson very cool
@cafub2650
7 жыл бұрын
Just is excellent news for new guys like me.
@successfullHuman
7 жыл бұрын
i just got this one!
@acesonthego2287
7 жыл бұрын
Nice Product for the price, that something i need to check up on, Good Video
@MG-nn8dy
7 жыл бұрын
Hey JD, Using the FrSky XSR receiver, where would you plug the smartport wire into the FC for it to send VBAT/VFAS (in SBUS config).Thanks. Great video!
@dannypalma4262
7 жыл бұрын
have you set up OSD. It flies great and easy set up. Not sure what OSD on board?
@Politicallyhomeless957
7 жыл бұрын
GreAt in depth review 👍
@budjones528
7 жыл бұрын
Heh, Drone Camps-- I need a little help--AS soon as you can!! I have 2 builds with the Rapter 390 installed. In pluggingin the receiver, and the VTX, -- I power up-- nothing-- no power to the board. It will sound through the motors as it usually does. There has to be another power connection somwhere. A little help, please!!
@matthewfoxx6410
4 жыл бұрын
Excellent
@DeanF
6 жыл бұрын
I have one in a stretch 210 and it flips out on 4s, don't want to go back to 3!
@RobertSmith-vz5yh
7 жыл бұрын
I am starting to get into FPV racing and want to build my first quad. I have decided to run this stack for first-time builder ease! So besides, motors, props, frame, FPV camera, battery, and radio (Do each radio's come with the quad receiver?) ...What additional parts will I require? I was planning on running these parts: (What else do I need and what are some good recommendations) Frame: Vococal - QAV 210 Motors: 4X Racerstar Racing Edition BR2205 2300KV FPV Camera: Foxeer Arrow V2 Stack: FlyColor Raptor 390 (S) Radio/Receiver: Turnigy Evolution
@silteczneuerkanal6764
7 жыл бұрын
what voltage does it handle i am looking for a fc pdb ... combo for a copact 6s build nice video by the way
@victorquintero4002
7 жыл бұрын
how about doing a tutorial of how DIY Quad Racer? I now there's tons of videos but I follow you... thanks nice channel.... Greetings from Puerto Rico
@frankwarner7279
7 жыл бұрын
Great review thank you! quick question, where did you hookup the yellow smartport wire from the Frsky receiver?
@budjones528
7 жыл бұрын
I aasumed that an integrated wall such as this would include the power going to the board. I do not have power to the board. Is there a separate power connection that I am missing?
@ryujiyamazaki583
7 жыл бұрын
Hi Justin, thanx for the small review. You mentioned in the video that you will put a link where you can buy the smoke stopper and you haven't added that or can you open it up and tell us which fuse is used in so we can make it :-). Or please provide the link so we all can also make use of that, thank you!
@justinholmes5614
7 жыл бұрын
Ryuji Yamazaki looks like a grey fuse, they are 2 amps.
@seferon100
5 жыл бұрын
Thank you for video. I have question can i connect GPS module Radiolink TS100 Mini M8N GPS Module UBX-M8030 to this tower? Thank you for answer .
@tonywalsh2358
7 жыл бұрын
hi have you done a build that people can follow?? great video
@shikyshaky1
7 жыл бұрын
why are your escs 20amp on your firmware? isnt' it supposed to be 30amp?
@dronecamps
7 жыл бұрын
I got the 20A version
@WayneSoBlessed1
7 жыл бұрын
what recievers can be used with this,I asked on gearbest and they said you cant use spektrum satellites
@dchamp296412
7 жыл бұрын
Hey there mate, could you show me how you connected your x4r please sir, one almost got mine built just don't want to mess up my receiver
@guzkr0111
6 жыл бұрын
I have this its super awesome just don't let the esc touch the frame it will fry the 4in1 happen to me
@hans7701
7 жыл бұрын
At 15:00 mins you say select the 30A version but then you select the 20A one. Is there no 30 AMP version of the ESC?
@dronecamps
7 жыл бұрын
Yep. It's 30 amp.
@tonywalsh2358
7 жыл бұрын
hi just got the raptor having problems setting the modes up any ideas? thanx
@SeeFPv-qm6ie
7 жыл бұрын
will that fit the martian rx180mm v2 frame with 1306 3300kv motors
@WX4CB
7 жыл бұрын
what OSD is in the flycolor.. because i flashed the new betaflight and it doesn't work. what are the port settings on it, do you know ?
@SpdFrk-ku4md
7 жыл бұрын
MWOSD
@SeeFPv-qm6ie
7 жыл бұрын
should i update my esc on my furibee fuuton 200mm fpv quad or leave as is
@sumhapp
7 жыл бұрын
Are spektrum users able to use this FC with the newer spm4649t?
@IIBennacII
7 жыл бұрын
I'm having trouble finding a place to wire the vtx for power. Where do I do this? 😤 390 30amp version
@Tailg8_in
7 жыл бұрын
Is it compatible with Spektrum 3.3.v satellite receivers?
@zekeisme1
6 жыл бұрын
where can i buy the little plugs to solder to receiver
@ComradeGrr
7 жыл бұрын
Hi, mine arrived today and I've hooked it up to a spare VTX and camera to bench test - all working great. One issue I have is that the lastets build of BetaFlight doesn't detect the OSD so can't change any settings and I'd really like to remove the artifical horizon from the view, anyone shed any light on this please?
@yannolet28
7 жыл бұрын
Martin Fluck You need MWOSD with 1.5 version not higher... then you will read the osd and change your display
@alexriver1290
7 жыл бұрын
does the flight controller and escs support dshot?
@gegenxxwehr
7 жыл бұрын
what board did you choose for Betaflight?
@philippelibreros5609
7 жыл бұрын
How do you guys manage to get Betaflight to detect it? Can't boot this board...
@guzkr0111
6 жыл бұрын
short the 2 pins for the boot on the FC..
@WX4CB
7 жыл бұрын
any 3.3v outputs and i assume i can use the same sbus port for us spektrum users ?
@WayneSoBlessed1
7 жыл бұрын
Daytona FPV I dont think you can use spektrum sattelites with this which i dont understand why
@badroualialami2282
7 жыл бұрын
Hi, Are the esc's blheli or blheli S? any current sensor in there?
@dronecamps
7 жыл бұрын
They are BLHeli.
@captainover7479
7 жыл бұрын
Anyone figure out how to update the OSD firmware from 1.5 to 1.7?
@Sqwince23
7 жыл бұрын
I was able to update it through the ISP programming header and using the Arduino IDE.
@lukastamulevicius8308
7 жыл бұрын
Can I ask you how did you manage to do that? I have FlyColor Raptor S and I'm trying to upload firmware with FTDI adapter and Arduino IDE, but I always get "An error occurred while uploading the sketch"
@ianrice1778
7 жыл бұрын
Just subbed...... I'm having trouble flashing the firmware with my f3 and it's the same one your showing on your channel. Can you help me? Do you have any tips how I can flash this darn firmware? I lost all osd and it's saying I need to update the firmware. Thank you.
@gecoutin7301
7 жыл бұрын
I have the same pb, I lost all OSD. I'm having trouble to flash the firware.. helps!
@mxnew2004
7 жыл бұрын
do you know how to flash the mwosd on this tower? I have tried several forums and no one has the answer. if you know how can you please share thanks
@tonywalsh2358
7 жыл бұрын
hi have you use the boot??
@Sqwince23
7 жыл бұрын
I was able to flash MWOSD through the ISP port using an FTDI cable and the Arduino IDE. I am running the latest MWOSD, but can't seem to get the RSSI and VBat reading the proper values in the OSD... any tips on getting those to read properly?
@doctormm4623
7 жыл бұрын
could you weight the tower?
@89vic3
7 жыл бұрын
What vtx can you use with this?
@jesa275
7 жыл бұрын
can you send me you CLI configuration please?
@successfullHuman
7 жыл бұрын
Have you looked at the osd?
@dronecamps
7 жыл бұрын
Not yet. I have a frame coming though for it.
@SeeFPv-qm6ie
7 жыл бұрын
can you use 4s lipo i have one too
@dronecamps
7 жыл бұрын
Yes
@SeeFPv-qm6ie
7 жыл бұрын
i have the 20amp i think or 30amp either one can i use 4s is it ok just to be sure i dont burn the esc out
@dronecamps
7 жыл бұрын
We use 4S with 20A yes
@SeeFPv-qm6ie
7 жыл бұрын
ok thank you can i also use 4s on lumineer 2204 2300kv motors is it safe
@dronecamps
7 жыл бұрын
Yes
@nathan1sixteen
7 жыл бұрын
I'd rather have them add another layer so that you can get more through holes then those stupid plastic connectors!
Пікірлер: 75