On the new stack I got a few days ago I was able to serial passthrough and use the new chrome app for MWOSD no problem, worked like a charm, surprised me actually. Version 1.7.15, thanks for the pass through tip!
@brandonklaus2903
6 жыл бұрын
Did you ever try 1.8.0.0. attempting now, with the desktop software, so far, no good.
@ultimatekyle330
6 жыл бұрын
dude! thank you for this one... this OSD issue was driving me crazy... weeks waiting for parts and getting an amazing quad together only to see a flashing BAT icon and flashing 0.0V ... anyway! it worked perfectly. thank you. now i know for my next Raptor stack build.
@mitchellbradshaw4287
6 жыл бұрын
Worked perfectly thanks !
@Ismir123Uebel
7 жыл бұрын
Hallo Is it possible to remove the " FLYCOLOR " sign ( upper/left ) ??? I mean NOT the craft Name ! What ever i try, i cant remove the sign! Thank your verry much (and sorry for my bad engkish)
@amanieo
7 жыл бұрын
Did you solve it?
@Sowrk
7 жыл бұрын
I would like to know this aswell
@kaylahstrider744
7 жыл бұрын
Thanks for the vid!! I recently got this FC in the mail, and I am currently waiting for the rest of my gear to start my build. As a whole, how do you like the FC? I mostly got it for A) the color B) the 4 in 1 ESC's and C) the on board PDB. I am putting this into an Armattan Chameleon frame. Thanks!
@xavtech7717
5 жыл бұрын
Hi, thanks for your clear and instructive video. Do you still have the MWOSD GUI configurator V 1.5 ???
@antramonebullard4035
5 жыл бұрын
Those first 5 startup beeps mines doesn't do the last 2 do you know why?
@bluefire87HN
7 жыл бұрын
Thank's man!
@wyomingoutdoors
7 жыл бұрын
hmmm... I get an exception error inside serial ports???? just opens black processing box then hangs there.
@gwizzfpv6741
7 жыл бұрын
hi there ace video would you no how to get your telemetry to go from the raptor s the my taranis pluse and rrsi it all working in googles but noth comes throw to the tranis ?
@musicwithfingers
7 жыл бұрын
Hey Brothers, having a little trouble getting my video to pop up in my goggles. how did you guys wire up your vtx and camera to the raptor s tower?
@beau6521
7 жыл бұрын
Can get my dsm2 receiver to connect/work...any thoughts or help?
@MindBodySoulOk
7 жыл бұрын
This worked exactly one time and now the osd will only look at the same port that betaflight is on. Any ideas?
@alanchastain4518
7 жыл бұрын
I used this and it was very helpful, but I can't get the ARMED status to show ARMED, it just flashes no data. Any ideas?
@shanehugehugentugler903
7 жыл бұрын
make sure uart 2 is turned on in betaflight ports tab.
@andreagreco919
6 жыл бұрын
hello with the raptor s does not connect and then I open Windows 32 and not 64 why?
@mrgoldfpv7331
6 жыл бұрын
The mwosd not working with all betaflight version.That is the main issue with mwosd 1.7
@geoffreynewcomb9201
7 жыл бұрын
Is there a way to use the betaflight OSD on this stack rather than MWOSD that any one is aware of?
@thejason51873
7 жыл бұрын
I wonder that myself
@FliteBrothers
7 жыл бұрын
Geoffrey Newcomb Nope. unfortunately.
@coreymarinello2344
7 жыл бұрын
so to connect at all you need a battery right
@WX4CB
7 жыл бұрын
thanks for the video, been trying to figure out how to troubleshoot my osd. problem i have, is the osd disappeared from the video (im still getting camera) but i tried the passthrough and im just getting waiting osd when i load up mwosd.
@FliteBrothers
7 жыл бұрын
Daytona FPV are you powering with battery. If so and you still have issues, I suspect your built in OSD chip is simply bad.
@RCFlyer85
7 жыл бұрын
Daytona FPV Did this happen after flashing BetaFlight?
@WX4CB
7 жыл бұрын
it's been so long i don't remember now to be honest, but it's possible... i have it all set right in betaflight ie uart 2 etc, im trying to find out if the osd debug port i can just plug an ftdi adapter into.
@yannolet28
7 жыл бұрын
got the same issue here, waiting osd still blinking and i never can't connected ... help needed please.
@yannolet28
7 жыл бұрын
i finally make it work, just close comm, and reconnect comm, i did tis 4 times and it worked.
@unknown-x-1777
7 жыл бұрын
Yeah I just put a Runcam camera on my arris x-speed 280 v2 and now half of my OSD is cut off on the screen. I can't get Mwosd 1.5 to work. It keeps showing up with one com port. Can someone please help me, I'm stuck.
@unknown-x-1777
7 жыл бұрын
I just switched the firmware over from cleanflight to betaflight and I'm trying to do the serialpassthrough to gain access to Mwosd and it will not work. I really need some help. I'm trying to take my signal off of PAL and put it on NTSC. I have some pictures if that would help.
@unknown-x-1777
7 жыл бұрын
Omg, I finally got it working. It never Once showed up on my PC like it was working properly it just kept saying OSD Waiting..... I hit NTSC option and hit save and even know it didn't show that it was responding on my PC, it actually took the command to change it from PAL TO NTSC. Thank god, that was driving me crazy, I couldn't even see my voltage or my flytime and the OSD was flickering.
@julistrauss6106
7 жыл бұрын
Do i have tomake settings whatfc i use?
@MudflapNichols
7 жыл бұрын
I understand the serial pass through, and have no problems with that, but how do you open MWOSD? When I do what you did in the video, I get the command prompt window for about a split second, and then nothing happens. In the video, the command prompt window hangs out for about 2 seconds, and then MWOSD pops up. What am I doing wrong? I'm using Windows 10 if that matters. Any help from anyone would be appreciated.
@FliteBrothers
7 жыл бұрын
The old GUI can be finicky. MWOSD recently came out with a google app that is easier to use. I suggest you try that instead.
@MudflapNichols
7 жыл бұрын
Thanks.
@NoAgendaFPV
7 жыл бұрын
The Chrome Configurator will not work with this stack/MWOSD1.5 firmware. I have tried it. It pops an error code saying that it cannot communicate with the old version.(This is with the 1.7 configurator)
@MudflapNichols
7 жыл бұрын
NoAgenda Drones I just downloaded the Chrome App. It's cheap and easy, but it is a drag that you can't use Betaflight. Since that post, my Raptor Kwad is MIA. These days I'm using a Betaflight F4 and its OSD is fully configurable in BF.
@julistrauss6106
7 жыл бұрын
Help me! My Tower Cant be find!
@ericboyd3180
7 жыл бұрын
I cant seem to get the 1.5 gui to open on my surface pro4 did the serial passthough fine but no luck launching the gui. Has anyone figured out how to update the firmware to 1.6 or 1.7?
@FliteBrothers
7 жыл бұрын
Eric Boyd To update the firmware you'd have to use an FTDI adapter to the the ISP connection on the big white plug on the FC. What error are you getting on the GUI when you open it?
@ericboyd3180
7 жыл бұрын
Just kinda flashes like its gonna open but then nothing. I have the google mwosd config too but requires a newer version of firmware
@FliteBrothers
7 жыл бұрын
The original gooey is a Java based app. You're likely experiencing a Java problem. Make sure you have Java installed on your computer and also try both the 32-bit or the 64-bit version.
@dexterdog5522
7 жыл бұрын
Hello, I recently purchased an arris c250 v2 quad that has a flycolor raptor tower. I have tried to use beta flight serialpassthrough with no success. I have the battery connected to the quad and the only thing that shows up on the LH SIDE of the screen is CLI. When I'm in clean flight, I have all the options on the LH side of the screen. All I really want to do is remove the sidebars and horizon bar from my osd. I can't do this via my transmitter because I don't have telemetry. I apologize, I'm very new to the whole quad thing. Giant scale is easier than this!😀 Thanks for any info
@FliteBrothers
7 жыл бұрын
I'm not sure what you mean. After you enable serial passthrough, you should be disconnecting from clean-flight altogether and then connecting to the OSD via the MWOSD 1.5 configurator tool. (Link is in the description)
@dexterdog5522
7 жыл бұрын
Flite Brothers I am using Betaflight Configurator 3.1.1. It connects with Comm 5. When I try press connect, I get a statement that says "Warning: Non Betaflight firmware is not supported. Please note that this tool is designed to support the advanced features of the Betaflight firmware, and does not support use with other types of firmware, except for in CLI mode." It says CLI mode detected but when I type serialpassthrough 1 115200, it says "unknown command, try 'help'. Again, I get all the features in the LH column when I use cleanflight instead, But still can't do anything with CLI mode.
@FliteBrothers
7 жыл бұрын
I see. So it must be that your board is running some version of cleanflight that does not support serial passthrough. It would be best if you flashed the firmware on the board to Betaflight instead so you have this feature and you'll have better flight characteristics anyway.
@dexterdog5522
7 жыл бұрын
Ok now you'll really have to forgive my stupidity. How do i do that and if I do, am I going to loose all the settings that are programmed into my flight controller.
@FliteBrothers
7 жыл бұрын
Using Betaflight configurator you would have to click on the Firmware Flasher tabe on the left (before you connect). Then choose SPracingF3 as your target and the latest version as your firmware. Then on the bottom, click load online and then flash. You will lose all your settings though so you may want to take some notes of what was what before you try.
Пікірлер: 70