BF 4.4.0 has a bug in GPS rescue that can cause the quad to disarm above the ground and crash. This is fixed in 4.4.1. You should flash 4.4.1, not 4.4.0 like I do in this video. I have confirmed that the Flywoo 4.4.0 CLI dump should work fine on 4.4.1. Just do exactly as I do in this video, except flash 4.4.1.
@boo7948
Жыл бұрын
poggies
@jamescunningham541
Жыл бұрын
Just got my first 03 unit. Djis instructions were already wrong about canvas mode. Telling me to enter cli commands that are no longer available since beta 4.4 added the option in the ports tab. Still can't install assistant 2 on any of my MacBook pros, so my buddy has to update all my dji stuff. And now, I find out my goggles v2 delete all my binds every single time I switch modes. Ugh 🫣
@sten6537
Жыл бұрын
Should I enable or disable the Barometer if I use GPS rescue?
@runpuppyfpv5744
Жыл бұрын
Happened to me
@erv5890
Жыл бұрын
@@sten6537Wut? You should preferably have the barometer ON whenever possible.
@derivas007
Жыл бұрын
you video are very incredible! could you share you cli setup for latest version 4.4.1 ?it will be very nice
@cruxdevill9127
7 ай бұрын
Hi I just purchased this drone and I’m new to fpv. For some reason when I connect it to beta flight configuration it says it has flywoo7 firmware at 4.4.3 ( can’t recap as I’m not in front of my pc at the moment) and when I try to flash to fly woo 405pro it says fair to find firmware. And defaults back to flywoo7 4.4.3. And when I try to import the both cli one from beta flight and the osd cli from this video it just disconnects and reconnects the drone and any osd change is wiped. Is someone available to help a noob understand this I want to get it flight ready. I am willing to give some money for assistance.
@MuffinmanT90
5 ай бұрын
Same problem I'm having I'm getting no input from reciver and my osd won't show up at all
@weiq1887
Жыл бұрын
The firmware target was changed from 4.3 to 4.4.
@HugoLocs-os6cn
Жыл бұрын
If someone has the fakest laughs its got to be this guy
@thefatmoop
Жыл бұрын
4.4.2 is released 6/1/2023 what i did differently Selected flywoo405PRO board Looks like config text for ports peripherals changed, so loading from configs will fail to get osd working. To fix: ports -> UART3 in peripherals -> change from disabled to 'VTX - (MSP + DisplayPort)' Test flight - no issues, gps and sesnors good. Didn't try gps return to home
@Nekzuris
Жыл бұрын
I also flash 4.4.2 today and no issue with OSD, 'VTX - (MSP + DisplayPort)' was correctly selected but in the OSD tab video format is still Auto by default
@jpnews77
Жыл бұрын
Why take the F405PRO flight board when there is the original F405 version?
@WATCHMAKUH
Жыл бұрын
Exactly what I was looking for. Nice video 👍🏻 And you might want to change the target to F405PRO. Do not auto detect. Maybe that’s why you got some red lines in CLI
@imignap
Жыл бұрын
I might be thankn you too early. But this seems to have fixed the loss of gyro, accel with auto detect for 4.4.1 method stated above. I just reloaded my presets from earlier, not too much red, but still some...
@WATCHMAKUH
Жыл бұрын
@@imignap reloading your presets would be ideal. I’m just following what flywoo’s manual said. Plus, they only have 4.4.0 CLI…so it won’t be 100% correct, but better than losing gyro and accel doing auto detect.
@_tcmore
Жыл бұрын
Will this work the same for the LR4 Vista version that I bought last year?
@mirorava3296
Жыл бұрын
thank yuo very much for these two videos about the flywoo explorer lr 4 with o3, i just ordered it as my first quad and also ordered a radiomaster zorro with elrs and a pair od dji goggles v2, it is a pure coincidence that yesterday you released these videos!! do you have some suggestions on if this build is good for a beginner in fpv that wants to do long range and smooth cruising shots? thank you anyway for anything you are doing!
@bugsy742
Жыл бұрын
It’s absolutely PERFECT for that my friend 👍 ( just incase JB doesn’t get the chance to get back to you 👍😎 )
@AtanasBogdanov
Жыл бұрын
I've got an old ELRS receiver that was flashed with ELRS 1.0. Just for information that you cannot go straight to 3.x
@ror-ys3qp
4 ай бұрын
sir you do the best videos on youtube. you are clear and precise and get right to the point and you give links in the description to all items in the video...super thanks
@Paulwhittingham
Жыл бұрын
Anyone buying one should most definitely grab a copy of the cli dump on their site before they remove it. Because just imagine them leaving cli dumps for the previous 3 iterations of this drone available. Yeah imagine that..
@janvyhlidko1490
Жыл бұрын
Great Video, 🙏 what about new geprc cinelog 35 v2, are you going to do some video on it?
@rrenegadoo
2 ай бұрын
Excellent video.... I did something wrong and when I couldn't recover the "dump files" from my old computer.... were can I get those files for flywoo explorer HD LR4 version 1 with caddx vista... Thank you.
@pbshooter100
Жыл бұрын
Just a bit confused here. Is the BF upgrade process shown here for all the current versions of the LR4 or just the HD dji 03 version. I.e. I have the newest analog version 2.2 and am not sure if this update process applies to my quad as well. I suspect that it does but I want to be sure.
@leedutfield964
4 ай бұрын
trying to get one of these working with walksnail and elrs. getting a message say betaflight failed open usb device when trying to go from 4.3 to 4.5 any help?
@sten6537
Жыл бұрын
Would you increase the PID loop to 4khz on this setup te reduce vibration (i have crazy amounts with this quad). And is Dshot higher then 300 also an option?
@gloorfpv1801
Жыл бұрын
The little Flywoo explorer is pretty much all I’ve been flying this year
@АнтонТитов-б6с
7 ай бұрын
is it possible to put go pro/osmo action on this drone, and what time flight is extected with it on board if it is possible?
@sebichaos
5 ай бұрын
just got those drone, wondering if there is any new update we should know about?
@YTFPV
11 ай бұрын
why would my gps keep beeping even when flying ?
@GregQuillen
Жыл бұрын
I wish the hexplorer F745Hex had a 4.4 target. Devs couldn't get all 6 motors to work
@dunerunnerfpv
Жыл бұрын
Oh no, is that true? I was just about to try that. I was having trouble getting it into dfu mode anyway.
@GregQuillen
Жыл бұрын
@DuneRunner FPV I tried A few times. We forced other target the f745 nano. Then dev were helping me change resources and timing . And always one motor wouldn't work 😭 Maybe if we complain to flywoo enough flywoo will work to figure it out
@Lambdrone
Жыл бұрын
Trust, they didn't ship it with 4.4 lol
@MrMaclip
Жыл бұрын
Hello. I'm experiencing a problem loading OSD data from the provided file. Actually, all loads fine and there are no errors. However, when I go to OSD tab everything is still the same, as it was before. Any ideas? Here is a small gif of what I did and what I received: drive.google.com/file/d/1KXUkQktaqOB4USkmlHfaPgSLrGeXi3mg/view
@aantoniv
Жыл бұрын
I have the same issue, did you manage to solve it?
@kalyan3
Жыл бұрын
same issue as well. any clues?
@AZ-FPV
Жыл бұрын
@12:58 .. wait a minute (!) unless i am mistaken in your “definite guide” to ExpressLRS you used the other .bin file (with the model name) to flash the Rx but in this video you used the firmware.bin to flash the Rx .. so which one is the right one or best to use or am i totally off here? Thanks
@JoshuaBardwell
Жыл бұрын
They are identical
@AZ-FPV
Жыл бұрын
@@JoshuaBardwell .. hey i learned something today !!
@theinnocent714
9 ай бұрын
Hi all, mayb someone here can help me with my problem. Just got back into fpv n went HD n bought this drone with walksnail n crsfr, got it lastweek n flashed 3.9 to 4.4 firmware n reinstalled the “diff all” file that i save before flashing. Now drone doesn’t recognize tx or anything. Fc led stays red. Not sure what i did wrong, any help is appreciated
@JoshuaBardwell
9 ай бұрын
Man. This video shows you how to upgrade to 4.4. You searched for, "How to upgrade flywoo explorer lr4 to betafligh 4.4," but then Instead of following the video's instructions, you post a comment saying that you did something else, and now your drone doesn't work. How about you watch this video and do what this video says to do. Like ... honestly I just don't even know what to say. If I read that wrong and you are actually trying to follow the video, the place you went wrong is in pasting back in the CLI diff from 4.3 to 4.4. That's not what the video has you do. It has you download a factory CLI dump and install it.
@MCsCreations
Жыл бұрын
Thanks, Joshua! 😊 Stay safe there with your family! 🖖😊
@krisgleave
Жыл бұрын
Hi Joshua, I've managed to pick one up now and followed your video and all setup. Also followed the video to sort out all the GPS so ready to test that. The only thing I'm missing now is good rates. What rates do you recommend for the LR4 for cruising and filming? Thanks
@larsulrich3356
11 ай бұрын
I cannot get my DJI 03 air unit to go into bind mode. There are no lights/red light. The drone works and the DJI 03 air unit is plugged directly to the drone via the ports that it has and not a USB system to my computer.
@JoshuaBardwell
11 ай бұрын
You need to plug in a battery to power up the O3. Sometimes people try to bind using USB and it doesn't work like that.
@raypeery6317
Жыл бұрын
!!** Just a heads up to anyone trying to get the mag in the WS GPS to work - my BNF ordered in early June from RDQ has only 4 wires connected to the FC instead of 6. The mag will NEVER work no matter how hard you try - BTDT. I'm waiting on a response from Flywoo but this is no bueno for those hoping to run INAV.
@YonnBurgos
9 ай бұрын
Your face at 3:04 is priceless brother! I'm updating the firmware FC on my Flywoo Express LR4! They shipped it with an older Firmware version!
@Twinkying
Жыл бұрын
Having issues getting any more than 500 ft range with the Walksnail VTX. ANyone else have the same issue or any fixes?
@MichaelBurko
Жыл бұрын
Thanks for the guide! I just bought this drone after watching your video yesterday.
@gabrielpires2008
Жыл бұрын
mine is FC goku gn405 nano the update is for gn405pro. I can copy this CLI data to my ???
@TheDarrenhi
Жыл бұрын
How do you wire up a 30 amp Brushless motor esc to a Walkera Devention DEVO RX701 and a mini k-bar
@FantomPhish
Жыл бұрын
Keeps giving me "failed to open serial port" on this Quad, Guess I'm sticking to 4.3
@nateteator3901
Жыл бұрын
Great new content! That was a lot of work to update a few month old BNF. Somebody please sell us an AI bot that will help with set up & trouble shooting. I know what you're going to say, blunty will do it for $50 an hour.
@00fluxone
Жыл бұрын
whats your preferred O3 settings?? Also, noticing you are in the 16:9 mode on the O3 I thought you were a 4:3 guy?
@fpv-jedi
Жыл бұрын
Thank you for this video Joshua! Seems like Flywoo has done a good job providing proper CLI dumps. I tried to upgrade iFlight iH3 from 4.3 to 4.4.1 and stuck with no barometer, GPS, Servos and half of settings wiped. Couldn't even connect receiver. Any clues how to do this for iFlight F7 controllers?
@Girtthquake
Жыл бұрын
Unpopular opinion: i have absolutely no interest in ever dipping into espresslrs 🤣
@KazemBaidoun
5 ай бұрын
this video is amazingly easy to understand
@redcobra1246
Жыл бұрын
What if you flash the elrs "dyi bla bla.bin" instead of the "firmware.bin"? I've always done the first
@JoshuaBardwell
Жыл бұрын
They're identical.
@4brigger
Жыл бұрын
"props for noobs" should be a segment title
@TimsDrones
Жыл бұрын
Using the ports tab turns off telemetry.
@kalyan3
Жыл бұрын
I tried to flash the firmware but getting the error: 'no response from the bootloader, programming: FAILED' Can anyone help with this?
@belltyler757
7 ай бұрын
I'm having the same problem, did you solve this?
@sten6537
Жыл бұрын
I want to use 50hz on my LR quad and 150hz on all my other quads. I thought I could bind a model in EdgeTX with 50hz and bind a model with 150hz. But it appears that the packet rate doesnt change with the model. And If I would change a quad and forget to change the packet rate, it could have flight issues right? Because in Betaflight the quad has also flashed the packet rate preset.. Is there a way to make this more easy?
@JoshuaBardwell
Жыл бұрын
kzitem.info/news/bejne/lIlsy4mNfKOniI4
@seb-depp
Жыл бұрын
Very cool, just what I needed.
@sensivityable
Жыл бұрын
@Joshua Bardwell Hey, do you know if FCC unlock still works on the latest DJI Googles 2 firmware?
@JoshuaBardwell
Жыл бұрын
Goggles 2 has ham unlock and yes it works.
@matsch_.3947
Жыл бұрын
Should I buy the Dji goggles 2 or will the Dji goggles v2 be supported for the future too? What do you think?
@robknight9406
Жыл бұрын
Stick with the comfortable v2 goggles that don’t fog up & can see the image edges clearly
@jasonleesuffolk
Жыл бұрын
I flashed the latest version on my flywoo Explorer now it has no gps or accelerometer reading,i tried flashing an old one again but still not working?
@asalas88
Жыл бұрын
(I know it's been a month, but just in case) you probably flashed the wrong target. For some reason the board might get autodetected as F405 instead of F405PRO or vice versa. Check which one you have a flash the correct one
@runpuppyfpv5744
Жыл бұрын
That's funny
@FpvQuadFlyer
Жыл бұрын
Thanks for the good info…
@pietroseven8228
Жыл бұрын
My drone!
@sogol09
Жыл бұрын
why mine always failed to flash firmware?thats say "no response from the bootloader : programing : FAILED "
@mexani3m
Жыл бұрын
Отпаяйте приёмник crossfire
@sogol09
Жыл бұрын
@@mexani3m mine using elrs
@ukaszwasniewski7668
Жыл бұрын
I don't see any OSD can you please help?
@carlitov9734
10 ай бұрын
did you find a solution ? I have the same problem
@sweetdoodmd
Жыл бұрын
Thanks so much. Love the videos. The blue flashing led on my expresslrs receiver is not blinking, and there is no wifi. The LED is solid red. This is a brand new quad. Can you help me?
@kalyan3
Жыл бұрын
did you figure it out? I'm also getting this
@sweetdoodmd
Жыл бұрын
@@kalyan3 yes I had to hold down the pairing button and simultaneously plug the battery in and then it started flashing
@kalyan3
Жыл бұрын
where is the pairing button? Is it the small little black one to the right of the usb c port? @@sweetdoodmd
@sten6537
Жыл бұрын
How do you like the tune on the Flywoo explorer. Is it good? Would you suggest it over the standard BF tune or over any of the other presets you can select? And do you set the esc to 48khz and bidirectional dshot? Sorry for all the questions haha.
@The0nionKnight
Жыл бұрын
Supafly has a preset that works amazing on the Explorer.
@sten6537
Жыл бұрын
@The0nionKnight cant remember they have something for 4 inch and betaflight 4.4
@CoopzVideo
Жыл бұрын
Flywoo send it with the ESC flashed with bluejay and set to 48khz pwm and with bi-di d.shot all set up! And their tune seems decent too, although I'm looking to see if there's a tune anywhere for the heavier li-ion packs.
@DLJ2022
Жыл бұрын
@@CoopzVideo did you find any tune good for the 3000 mah li-ion pack?
@tracy1267
Жыл бұрын
thank you so much you this saved my ass
@riddles551
Жыл бұрын
Can anyone confirm if the o3 air unit fits within the original v1 or v2 frames?
@2bfpv882
Жыл бұрын
It'll fit but camera won't fit in mounts u gota print tpu cam mounts
@NotOfThisWorld567
Жыл бұрын
Just watcged Limon's review of this and was surprised to see it came with BF4.3. I figured that was why you had the GPS weirdness that you did and am glad you are doing this video now! Just started watching and I'm hoping to see that you figured out the issue and showed a solution before it ends.
@CoopzVideo
Жыл бұрын
The GPS weirdness is still there in 4.4.1 - not the disarming before landing, but the pitching back and forward. I read the Betaflight wiki and it's apparently normal!
@jamiebryce6091
Жыл бұрын
please read: (Flywoo are being very dodgy) funny thing I purchased this explorer lr4 03 air unit and a venom "different orders" however they were close to each other.of my thoughts even though they have been great quads all in all I was a preorder and they advised I would be buying it with a Roku f745 they however still haven't changed the web site support page proving what I say to reflect from745 to 745. they did however change all advertising etc luckily I save snapshots of all the online invoices now. they admitted it saying they had trouble with the f745. they will not honour the change and give me Roku f745 flight controllers advising well they do wha they need too so what the problem. I advised I will utilise these later when I no longer fly these drones and is a big decision choice when purchasing. they seem to be constantly doing things like this they need to be watched closely by everyone. the thing is they make really great stuff however they are not following the after service that is so important. I am one of your patrons for some time now Joshua keep up the work you do you are appreciated for your work. good on you bravo. flywoo.tawk.help/article/venom-h20-avatar-hd-tbselrs lol f745 flywoo.tawk.help/article/explorer-lr4-hd-bnf-dji lol F745
Пікірлер: 108