Dude! This is it! Been in and out of Ford service for 6 months thinking it was coming from transmission. Even they couldn’t figure it out. Thanks for posting this video brother!
@KeepItDirtyOffRoad
2 жыл бұрын
I had the same experience and why we posted it up once we got some good sound clips of it. Glad we could help
@shaungauthier4780
9 ай бұрын
That sound drove me crazy for over a year in my 2018. I took it to the dealership multiple times without a fix. Thank you!
@KeepItDirtyOffRoad
9 ай бұрын
Glad we could help. Most dealers won’t start at the check valve. Service centers are a profit center for them. They would much rather do the bigger job than check the basics.
@jonmarks9938
2 жыл бұрын
Driving my 2018 f150 3.5 ecobost the other day when an old Lincoln Town Car pulled up next to me. As we were driving I said to myself "boy that car sounds like S#@&". Well the Town Car took a turn and I could still hear the sound. I first thought it was blown turbos, talk about money. I got to work and did some research, found this video, and within 24 hours problem fixed. I took my check valve out and did blow in it in both directions and noticed it did not completely seal, so I had high hopes that was the issue. With my issue I did notice you can throttle down and control the grinding sound. My 20 mile commute it lasted a total of maybe a minute added up. With that said, once you are moving put it in 4 Wheel High and it should stop the issue until you can replace the check valve. Thanks for the video post.
@KeepItDirtyOffRoad
2 жыл бұрын
4wd clearing it is a clear sign it’s an IWE leak somewhere. Next step is to figure out from where. 99% of the time it’s the check valve. But it can also be the solenoid, lines, or the IWE bellow itself in the hubs.
@jorgeromo8
5 жыл бұрын
I have a F150 3.5 2015. Dealership quoted $1,954.00 to fix this noise by replacing 8 parts and pieces. After watching your video I went and picked up my truck from the dealership, bought the valve for $44 bucks and installed it using my hands only (no tools needed) in less than 3 minutes. Problem solved! Thank you so much!
@KeepItDirtyOffRoad
5 жыл бұрын
That is great to hear! Glad the video helped.
@nanettearnell2604
4 жыл бұрын
Thank you so much! I'm a single mom with 5 kids and truck problems stress me out. Good Samaritan KZitemrs just sharing knowledge are a life saver. Mine was actually my solenoid but I wouldn't have gotten there without this video. I feel like I should bake you some cookies or something 😂. Thank you so much for sharing.
@KeepItDirtyOffRoad
4 жыл бұрын
Nanette Arnell your welcome. That’s the main purpose of this channel. Help others with problems we face with out truck and our mistakes out on the trails. Reading these types of messages makes me so happy.
@20BMR
2 жыл бұрын
Follow up on previous comment, I got this part for 26$ at my local ford dealership they carried it in stock. Took me longer to open my garage door than it was to replace the part, I had it installed in a few minutes but kinda got nerves when I heard the air release outta the vacuum system when I took it off. Got the new one on, engaged my 4x4 back to 2x4 a few times to make sure everything was engaging and working correctly. Everything works and since then if put on about 1200 miles just running here and there allot of stop and goes and it’s never grind or tried to engage since. Awesome video and thank you. Saved me a shit ton of money going to a shop, never would have known this. You rock 🍻. Thanks again 💯🤙🏼
@KeepItDirtyOffRoad
2 жыл бұрын
That’s great to hear man. Glad we could help
@jcpc9864
2 жыл бұрын
Thank you for the video. I was worried my transmission was screwed. I watched this video on the way home from the grocery store, pulled into my local ford dealership and bought this part $24.00! Fixed the issue.
@KeepItDirtyOffRoad
2 жыл бұрын
That’s awesome man. Glad we could help.
@20BMR
2 жыл бұрын
I thought the same thing, torque converter/tranny something but yeah it sounded bad. Crazy a dealership stocks this and it must be a common thing if ford carries it on hand. I live in a small town and they had it too. 26$ a few minutes install 1200 miles later of stop and goes running errands and no issues. Floors me this was the issue cause that grind from the vacuum system engaging sounded cringe😳😖. High five happy this worked for you too 💯🤙🏼
@DaveEdwards-kh9wx
Жыл бұрын
This problem only occurred to my 2015 F150 when the temperature was less than 32 degrees F. My mechanic was not able to reproduce the last time the truck was in the shop. I saw this video and decided to replace the check valve and solenoid valve. IT FIXED THE PROBLEM!!! Thanks for posting this video as it saved me some bucks and fixed the truck.
@KeepItDirtyOffRoad
Жыл бұрын
Glad we could help
@akrolite
4 жыл бұрын
Dude same issue on my '15 f150 with 66k. What a great world we live in with so much info. Thank you!
@KeepItDirtyOffRoad
4 жыл бұрын
akrolite your welcome. Glad the video could help out
@jmiller1474
3 жыл бұрын
I want to thank you for this video. You saved our family vacation while towing the travel trailer. The noise got worse and worse. Replaced the check valve and problem solved. Thank you.
@KeepItDirtyOffRoad
3 жыл бұрын
That is great to hear. It’s why we put our videos out there
@thebeardedrooster2871
5 жыл бұрын
Thanks man.. I was pissed because I just bought a 2017 F150 3.5L and had it for three days. Heard this noise on the way home from work this morning.. Thanks again brother. I can sleep better now.
@KeepItDirtyOffRoad
5 жыл бұрын
Your welcome. Just make sure it’s tight when you close it and call them up if you have problems. They have good customer service
@joshtorgy
3 жыл бұрын
Bro, you have no idea how many stupid sounds I've made to my friends trying to figure out what issue it could be. Glad I found your video. I could never replicate the sound for a friend, but the second my wife jumps in, it would come back.
@KeepItDirtyOffRoad
3 жыл бұрын
🤣🤣🤣 I was in the same boat and why I made the video
@tdawg557
4 жыл бұрын
I almost payed my 100 deduct to have the dealership to try to diagnose and fix my truck. I’m glad I came across this vid .
@KeepItDirtyOffRoad
4 жыл бұрын
T Dawg that’s awesome man. Glad we were able to help.
@roberttarter580
10 ай бұрын
First of all... I LOVE YOU MAN! Was experiencing this exact problem. Thought it was my transmission, i would hear the noise then it felt like it was slamming into gear. But I noticed it was happening about 2000rpm in any gear. Then got in contact with a Ford tech, he told me to put it into 4WD while rolling about 50 mph and if the noise stopped it was my IWE( When the 4WD is engaged there is no need for the vacuum, so the grinding noise stops). I'm thinking, here goes $1.5k to $2k gone! So I KZitemd it and found you once again! Thanks bro! Took me longer to get the part then it did to put it in! Whole assembly cost about $25 at the dealership near me. Keep it Dirty my man!
@KeepItDirtyOffRoad
10 ай бұрын
🤣🤣 that’s awesome man. Glad we could help.
@paullesiw8985
3 жыл бұрын
This is the $22. fix! When I first heard this noise in my 2017, 3.5l ecoboost F150 XLT, I thought I was dragging my muffler. It was intermittent, then it came back and this video has the same noise. Good job in also recording the noise.
@KeepItDirtyOffRoad
3 жыл бұрын
When I records this video, the valve was $8. The new Blue valve is $22+ now. Not sure what they charge to increase the cost that much, but yeah.
@jasonschell6036
3 жыл бұрын
Started grinding on the way north for our vacation. I called several auto parts stores but no one had one. Drove up on a Ford dealership and pulled in at 5:20 on a Friday with only 10 min to spare. Swapped out the valve, no tools in 5 min problem solved. Vacation saved.
@KeepItDirtyOffRoad
3 жыл бұрын
That’s awesome man. Great to hear stories like this
@jasonjustin3703
2 жыл бұрын
I want to give you a huge kiss on the cheek. I think you saved my truck and my marriage. After I pulled the old valve out I checked it and it leaked only on slow draw and with a quick draw it was sealing. It was so frustrating. Thank you for making this video.
@KeepItDirtyOffRoad
2 жыл бұрын
Your welcome.
@ravinnanpatee7939
5 жыл бұрын
In the first 10 seconds I said yes to this dude
@muro2140
5 жыл бұрын
😂😂😂😂 they call that a hook! Hope the info in the video was able to help you out.
@richardlewis7471
4 жыл бұрын
Me too🇺🇸
@tufankilinc636
2 жыл бұрын
Bro, you rock! That fixed it. Do vids on transmission and differential fluid changes.
@KeepItDirtyOffRoad
2 жыл бұрын
Your welcome. We do have differential and transfer case videos up. But not transmission yet.
@adamkendrick6184
4 жыл бұрын
Bro, first video I’ve watched of yours and I fed like your style. Short and to the point. My language.
@KeepItDirtyOffRoad
4 жыл бұрын
Adam Kendrick thanks man 🙏🙏
@danedsa
3 жыл бұрын
The brake light started coming on in my 2017 Raptor. Then the brakes felt slightly touchy and grabby. And finally the dreaded grinding clacking sounds when under slight load. Changed the check valve and noise is gone. Thanks for your video!
@KeepItDirtyOffRoad
3 жыл бұрын
Nice!! Glad to see the video was able to help
@fhr4292
2 жыл бұрын
Bro! You saved my life I thought it was a turbo going out it's the worst grinding noise!
@KeepItDirtyOffRoad
2 жыл бұрын
👍👍
@chuckb25
2 жыл бұрын
Happened to me multiple times. Dealer couldn't (replicate the problem). Saw a vid on KZitem, but, it was too late for the hubs. Took it to a "good" dealer who knew what they were doing and got the hubs replaced (under warranty). I was told that the hubs were retail $570 per......Happened again in San Antonio and thank God for Red McCombs dealership. They knew right away what the root cause was. Fixed again for free.
@KeepItDirtyOffRoad
2 жыл бұрын
Sucks you had to go thru this a few times. Most dealer never check, the check valve because they don’t get much from ford when it’s that. So they go for the bigger items that lay better. And in turn never solve the root cause and it continues to damage components. Very annoying how a $10 valve can cause so many problems
@ziplock7286
5 жыл бұрын
Just purchased 2018 f 150 super crew two weeks ago. Only has 20,000 on it and still under warenty. Started making this noise, took to Ford and they replaced the check valve. Thanks for your video, I will be on the look out now in the future.
@darrylzack1251
4 жыл бұрын
I had the same noise and searched the internet for a solution and found your video. I purchased the part from ford (they wanted about $24 and got them to lower to $18.) The part fixed the problem and I am so thankful for your video. The noise was intermitted for a few weeks and about 1000 miles and wonder if there was could be any permanent damage.
@KeepItDirtyOffRoad
4 жыл бұрын
Depending on how long you let it go, you can have permanent damage. I let mine go too long and eventually the bearing on the hub go out.
@farmerriegel1
5 жыл бұрын
My 2010 has been making this noise since I bought it 6 months ago. Just ordered the replacement part and will install it as soon as it shows up. I like his approach of not being afraid to say it may not fix it and that he may be human and make a mistake from time to time. Great video
@KeepItDirtyOffRoad
5 жыл бұрын
Thanks 🙏. This valve being replaced is the first step to check the Ford IWE. At $8 and only 5 min to replace it’s a worth while step to rule it out as 90% it’s the culprit. The other 10% is where it gets hairy and expensive
@johngordon2929
4 жыл бұрын
I just had the exact same problem for my Gen 1 - replaced the same part for Gen 1 and all is good. Much Thanks.
@KeepItDirtyOffRoad
4 жыл бұрын
your welcome. Glad the video could help.
@tonyhernandez8356
5 жыл бұрын
Man really thank you for this video I spend around 1700 on different parts trying to find this noise I really appreciate it. That you take the time to download it.
@KeepItDirtyOffRoad
5 жыл бұрын
Glad I was able to help.
@living2learn138
5 жыл бұрын
Man, I replaced both of my 2010 F150 hub locking actuators and the noise is still there, I'm sure your solution will fix my problem, I'll replace that IWE check valve tomorrow. Thanks for sharing your solution with the rest of us.
@KeepItDirtyOffRoad
5 жыл бұрын
Hope it helps. Also check the lines as they may leak too. In the description I have a link to OZ mechanics video on how to do it.
@TannerBiggan
Ай бұрын
Did this fix your issue? I have the same year and have a terrible noise coming from the truck between 1000-1500 rpm. Sounds like transmission grinding or something.
@KeepItDirtyOffRoad
Ай бұрын
Easy way to check man. Put it in 4wd. If the noise goes away it IWE. Then it’s a matter of figuring out what components in the IWE is the problem and the first thing to check is the check valve
@dcreech500
5 жыл бұрын
I’ve been dealing with this for 2 years. Been to dealership several times but it doesn’t make the noise on command so they don’t know what it is. I tell them it’s the 4wd vacuum and they replace the hub but not the hose you showed. I spent $100 on warranty and they solidly fix squat! I’m ordering this part and fixing. Thank you for posting!!
@KeepItDirtyOffRoad
5 жыл бұрын
There is a whole process to check the IWE system. It could be lines, the diaphragm and the solenoid. The check valve is the first thing to check. Sounds like the dealer not be doing a thorough check.
@mustang94299
5 жыл бұрын
Danny, I've had this problem for three years. I've changed the valve the solenoid and the actuator from the dealer. At first, I was getting a pulsating humming sound not all the time. The dealer just replaced the actuator two weeks ago and now it's f#cking worse than ever now on top of the humming noise I'm getting a grinding noise that I never had. It's F#cking frustrating.
@KeepItDirtyOffRoad
5 жыл бұрын
Sounds like bearings and maybe even the IWE itself is failing. Grinding noise would be the IWE not engaging all the way, while humming would be bearings. Next step would be to check the IWE lines for leaks, then check the IWE baffle is moving correctly and not leaking. Then check the bearings themselves. I recently had my bearings replaced because they were humming. My issues were very obvious and easily replicated by the dealer so they were finally able to fix.
@mustang94299
5 жыл бұрын
Keep It Dirty Off-Road That's so funny that you said that, I had the right front bearing done 6 months ago and I know what a bearing sounds like. I’m also a tradesman by so I do have so mechanical background. Sorry man...I’m not trying to be mean but this is driving me absolutely bonkers. This POS is a 2015 f150 Platinum so it's not a cheap truck. And the 5-year drive train is coming up. Do you what to hear something funny...I f#cken work for Ford Motor Company.
@KeepItDirtyOffRoad
5 жыл бұрын
Sorry to hear man. Completely understand your frustration. Have they checked the axel and steering?
@slosolo2
5 жыл бұрын
Thanks for the video it was a big relief to know it was a cheap and easy job, that noise sounded very expensive. I just got back from test drive and the sound is gone. I replaced the both the valve and solenoid in my business casual shirt without getting it dirty. No tools and less than 5 mins, you couldn't ask for an easier repair job.
@KeepItDirtyOffRoad
5 жыл бұрын
That’s is great to hear. Really glad the video was able to help you out. Left unchecked I can turn into a big problem.
@johngalley4048
3 жыл бұрын
Great simple explanation for those of us that are auto ignorant. Thank you
@joebartlett3255
Жыл бұрын
Thanks for the video, fixed mine during lunch in 5 minutes.
@KeepItDirtyOffRoad
Жыл бұрын
Awesome man. Glad we could help
@iShootFast
5 жыл бұрын
Great catch man. Drove me nuts trying to figure it out. Just replaced the valve and tube assembly , and that was it.
@KeepItDirtyOffRoad
5 жыл бұрын
Great to hear man. Really glad the video was able to help you out.
@stevevela8635
4 жыл бұрын
THANK YOU!!! This was driving me crazy. This was the exact fix - only difference from the video is the part was $33.00 from the dealer
@KeepItDirtyOffRoad
4 жыл бұрын
$33? 😳😳 that's crazy. Did it at least include the solenoid too? Or just the Valve?
@hugolessard4462
5 ай бұрын
EXACTLY what i needed to learn. I own you a cold beer anytime !! 🍺 Greetings from Québec, Canada !
@KeepItDirtyOffRoad
5 ай бұрын
Glad we could help.
@bentouli2
4 жыл бұрын
Thank you guys you’re awesome, this noise was so annoying I thought it was my whole transmission LOL
@KeepItDirtyOffRoad
4 жыл бұрын
Benny Fernandez your welcome. I’m glad the video was able to help
@chadw661
2 жыл бұрын
You sir are me hero right now
@KeepItDirtyOffRoad
2 жыл бұрын
👍👍
@kamala2111
3 жыл бұрын
Fixed my f150 check value today and it did it in 2wd.
@KeepItDirtyOffRoad
3 жыл бұрын
Check valve is just your first step. If putting it in 4wd clears it, you may still have a leak somewhere in the IWE system. I could be the lines, or the bellow in the hub. Check the description for a link to another video that may help.
@Jennifer-le4yw
4 жыл бұрын
Great video! Scared me to death when my truck started making this noise 2 weeks ago. Yep, mechanic found a bad check valve.
@KeepItDirtyOffRoad
4 жыл бұрын
Jennifer Wooten glad the video was able to help you out
@iMderevltn
Жыл бұрын
Bro this is exactly what I needed. I just got out of warranty and I feel like my service center screwed with my Raptor.
@iMderevltn
Жыл бұрын
Don’t go to KenGrody Ford. The service personnel lies and there is no accountability.
@KeepItDirtyOffRoad
Жыл бұрын
We’ve heard good and bad from them. Sales side they suck and the markups are ridiculous. On the service side it depends on your advisor.
@HitMan1515
6 ай бұрын
Fixed my problem!! Thanks for the help!!
@KeepItDirtyOffRoad
6 ай бұрын
Glad we could help
@agennello1
4 жыл бұрын
Thank you so much, fixed my issue right before a family vacation that I needed the truck for.
@KeepItDirtyOffRoad
4 жыл бұрын
Blitzkrieg FPV awesome man. Glad the video could help
@F15BOYOBOY
3 жыл бұрын
I'm going to buy this part and see if it fixes my issue. 2016 F150 4x4 Lariat CrewCab 4 door. Front right sounding like dragging, grinding when slowing down. Just replaced all 4 rotors and pads still have the problem, although front ones definitely needed replaced due to being warped by previous owner. Man I hope this does the trick thanks for the video pretty sure this is my problem. I'll update if it does the trick.
@KeepItDirtyOffRoad
3 жыл бұрын
a dead giiveaway if is the noise goes away when you put the truck in 4wd. then the IWE valve is the first check, followed by the solenoid, lines, and finally the hubs.
@F15BOYOBOY
3 жыл бұрын
@@KeepItDirtyOffRoad awesome ok will do. So put in 4wd and if goes away more than likely this valve is the problem so replace first right if I’m reading your message correctly? Thanks for the reply!
@KeepItDirtyOffRoad
3 жыл бұрын
@@F15BOYOBOY yes, putting it 4wd clearing the noise confirms it’s the IWE system. Fire thing to check with the check valve as it’s the most common item to fail
@F15BOYOBOY
3 жыл бұрын
@@KeepItDirtyOffRoad thank you Sir!! I will check that out tomorrow!! I will update as well.
@F15BOYOBOY
3 жыл бұрын
@@KeepItDirtyOffRoad so seems to be the problem. I was driving and it started making a grinding noise right passenger side and almost like a brake dragging and turned 4A on and it seemed to stop. 🤷🏻♂️ hopefully this will fix it. I think it will, part is on the way 😃. Thanks again for the video and I’ll let you know how it turns out!!
@VooduN_
4 жыл бұрын
Just happened to us in our 2018 Raptor, $23 at Ford dealer and fixed in 5 minutes. Thanks for the video 👊🏼
@KeepItDirtyOffRoad
4 жыл бұрын
$23 just for the check valve?
@VooduN_
4 жыл бұрын
Keep It Dirty Off-Road yep. One dealer quoted me $33
@KeepItDirtyOffRoad
4 жыл бұрын
VooduN 18_350 thats crazy! It’s a parts that maybe costs pennies to mass produce
@marks5245
4 жыл бұрын
Bought and changed it out today after watching your video. Was having the same issue. Thanks!
@MagnumD351
3 жыл бұрын
Did this solve your problem?
@rrbailey24
3 жыл бұрын
Amazing. Just the info we needed to keep our cross country trip alive! Turned a 1-2 day stopover while we got the truck fixed into a 45 minute detour. B i g T I m e T h a n k s !
@KeepItDirtyOffRoad
3 жыл бұрын
Glad we could help.
@jimmahlberg1650
4 жыл бұрын
My 2016 F150 was doing this. I replaced the check valve and it did not fix the problem. I then replaced the solenoid that this check valve connects to and that fixed the issue. Each part was around $20 so I ordered both and then tried the check valve first as I didn't think that would fix the issue. Just FYI
@KeepItDirtyOffRoad
4 жыл бұрын
Yep, Check valve is the first step.
@deandiamond5479
5 жыл бұрын
Great video. Thank you. I just bought a used 16 lariat and it's making the sound. The dealer is replacing at least one hub under the warranty ($200 deductible) but I may try this myself if the hub replacement doesn't do it. Thank you!
@KeepItDirtyOffRoad
5 жыл бұрын
Try the valve for sure. Is a cheap test and keep a spare handy. Ford recently redesigned the hubs and actuators so there are massive parts delays. I waited for almost a month for mine during the holidays.
@austinvenable7350
3 жыл бұрын
Thank you very much this video saved me a LOT of head ache
@jonhofelich9107
2 жыл бұрын
Really not happy with myself after seeing this. Thanks for the video. Wish KZitem had helped me out with finding it months ago when I was looking for it.
@leewilliam8606
5 жыл бұрын
Just done 5 minutes ago.Thank you for your video!
@KeepItDirtyOffRoad
5 жыл бұрын
Awesome man. Love seeing the video helped others out there.
@frankbergmanII
3 жыл бұрын
did it work?
@ilikethisgun4196
5 жыл бұрын
I had my 2017 f-150 to the dealer a few times. I even took the TSB from Ford. They couldn't find the problem. I started calling the higher-ups and sent some emails. By the time they understood the problem, they actually had to replace the whole left hub. $30 part vs $1000 part. What do they care, Ford is paying for it.
@KeepItDirtyOffRoad
5 жыл бұрын
It surprises me everyday when I hear this. Most dealers try and replace the most complicated components when most of the time it's the simple check valve.
@user-uy3eq5hg1s
5 жыл бұрын
Thanks for this.. having this issue with my brand new 2018 f150 4x4 v6 3.3L. Was towing my trailer to the Grand Canyon then after a few nights parked in a cold storm the truck started making this awful metal on metal grinding sound. I opened the hood and was able to push the connections around the solenoid in just a little bit more than they were and gonna test if that was it. If not I'll try buying this part and replacing it myself. Have an appointment with a dealership on Tuesday but know they're gonna try to milk me for cash and might not even tell me the real issue. Thanks again for this.
@KeepItDirtyOffRoad
5 жыл бұрын
Definitely worth trying the fix, takes less than 5 min to do and only $8. A dealer may waste days troubleshooting waiting on parts to show. If the problem persists after swapping you know it’s more serious and you’ll need warranty to fix it.
@user-uy3eq5hg1s
5 жыл бұрын
@@KeepItDirtyOffRoad Dealer ended up being awesome and fixing the issue in a few hours and... you guessed it...it was the check valve. Could have done it myself, but the dealer didn't charge me so it's all good. Thanks for posting this video... if the problem crops up again I'll know exactly what to do.
@KeepItDirtyOffRoad
5 жыл бұрын
@@user-uy3eq5hg1s that's great to hear. I'm out of the main warranty so I just keep one in the truck for the next time it happens.
@user-uy3eq5hg1s
5 жыл бұрын
DirtDays makes sense might do the same that sound is so awful. Does Ford know about this issue or what? I've seen forum threads on the f150 forums dating back to 2011 of people having this issue with 4 wheel drive either check valves or vacuum issues. Insane to me that I could buy a brand new 2018 f150 4x4 and have to replace the check valve at 12,000 miles. Never seen anyone from Ford acknowledge this and it seems like they haven't really fixed it?
@user-uy3eq5hg1s
5 жыл бұрын
DirtDays subscribed best wishes with your channel very helpful.
@chargercaddy
3 жыл бұрын
I began hearing a similar noise on my 2014 raptor today on the freeway, I checked to see if anything was loose being that it was my first time I heard that noise , didn't see anything out of the norm and made the 2hr drive home with no problem apart from that noise .Hoping it's a check valve 🤞
@KeepItDirtyOffRoad
3 жыл бұрын
Lynwood 82 put it in 4wd, of the noise clears its IWE and toy first check is the valve
@chargercaddy
3 жыл бұрын
@@KeepItDirtyOffRoad Thanks for the input 👍
@jacob350
5 жыл бұрын
Just wanted to say THANK YOU! this was a great info for a non mechanic, I used to be able to tear down my Harley or work on my old Dodge PW 25yrs ago without any issues it was pretty simple, but these days with all the on board computers and stuff it gets very hard for guys like me to fix problems, I saved $165 today because that is what the dealer was going to charge me to "look at it" I went in for my maintenance (that is all prepaid) and my local dealer just seems like they are always trying to get in my wallet, I have bought 8 cars from Hansel Auto group in NorCal over the past 25 yrs, how about a little customer service? anyway, loved the video I replaced the part easily, I will definitely share this on my thread!
@KeepItDirtyOffRoad
5 жыл бұрын
Wow man, that's awesome and great to hear. Im glad my video was able to help.
@iMderevltn
Жыл бұрын
Keep up with this great content, it is definitely needed.
@KeepItDirtyOffRoad
Жыл бұрын
Thanks, will do!
@20BMR
2 жыл бұрын
Awesome video man, I have a f150 lariat starting to make that horrible noise from time to time. No check lights display up and the truck seems to run great as performance wise. I notice mine more at gentle easy take offs or from time to wine on a slow turn while accelerating. It sounds harsh like hears grinding and it’s cringy. Thought it might be a torque converter or something but it’s m definitely giving this a shot cause it sounds like it is coming from the hub area.. I’ll keep ya posted but so happy I found this cause that’s a cheaper route than what I was thinking due to the sound.🤞🏼🤞🏼Thank you for posting this💯🤙🏼
@KeepItDirtyOffRoad
2 жыл бұрын
Glad we could help man. If you catch it early, 99% of the time it’s the valve. After that check the IWE lines for leaks and then the IWE bellows. Videos on how to check those is in the description
@20BMR
2 жыл бұрын
@@KeepItDirtyOffRoad I’ll definitely do that, my 2015 has just turned over 100k. It has the 3.5 ecoboost. I appreciate the response and help with this. Thanks again
@titantrucker
3 жыл бұрын
I fixed with with a new check valve and Ford wanted to charge me $1,600 to replace all the vacuum hoses that deal with IWEs 😂 I spent $21 bucks and saved a ton.
@KeepItDirtyOffRoad
3 жыл бұрын
That’s nuts!! Dealers always go for the big jobs and forget to check the basics
@BrettHoffmann
5 жыл бұрын
Thanks for the info. My '18 F150 is doing it with only 3,000 miles. At the dealer today, hopefully getting fixed. Wish they would design a more reliable check valve for this.
@KeepItDirtyOffRoad
5 жыл бұрын
I agree with you. But I think it comes down to simplicity. My take is that Fords system is soo simple and takes the load of the truck in such a simple manner that a fix would be more complicated than it’s worth. This hub design has been around for more than 10 yrs and Ford really sets the benchmark for trucks going offroad that I don’t think they want to mess it up.
@BrettHoffmann
5 жыл бұрын
@@KeepItDirtyOffRoad thanks. When I get it back, I may try to install another one in line, obviously the same flow direction. Shouldn't cause a problem would it?
@KeepItDirtyOffRoad
5 жыл бұрын
Not sure it will help. If the one nearest the hubs leak, it may still cause problems. Better to just keep the 2nd as a spare.
@chadwalker8859
5 жыл бұрын
Thank you for this video! My 2018 F150 3.5 ecoboost just started this weird sound. I thought a rock got caught in fan blade or a stick was dragging or jammed in fender well. The grinding has been real brief and completely stops. Anyway I’m getting this fixed ASAP. Take care!
@jpomfret68
5 жыл бұрын
Thanks. My truck has been doing this as well. Dealer wouldn't do shit if it didn't set a code.
@KeepItDirtyOffRoad
5 жыл бұрын
that sucks man. time to find another dealer. I have a few around me and they all suck. The only reason I use my current dealer is I finally got a good service advisor.
@davidmcdonald9866
5 жыл бұрын
Great video, my 04 f150 is making a similar noise, I just had my hubs replaced and still making the noise. I changed the solenoid as well and still doing it. Next I try this! Thanks for the info!
@KeepItDirtyOffRoad
5 жыл бұрын
If the problem still persists after the valve is replaced, take a look at the lines. You may have a leak somewhere in the line. It’s a simple test using a brake bleeder kit. Check the video description for a quick video from OZ mechanic on how to do it.
@davidmcdonald9866
5 жыл бұрын
How do you tell if the valve is bad? You shouldn’t be able to blow through both sides of it is that correct?
@KeepItDirtyOffRoad
5 жыл бұрын
I don’t think it’s that easy. But it’s an $8 part and worth having a spare anyways as they fail all the time.
@davidmcdonald9866
5 жыл бұрын
Ended up being my fix. Thanks again!
@KeepItDirtyOffRoad
5 жыл бұрын
Glad you finally found the fix. Always keep a spare so if it comes back, you can quickly rule the check valve out and move on down to the other components.
@johnyokabaskas1872
2 жыл бұрын
Perfect diagnosis. You were a huge help, thanks!
@KeepItDirtyOffRoad
2 жыл бұрын
Awesome man. Glad we could help
@bradbury2007
Жыл бұрын
My 2014 f 150 Ecoboost is doing this. I thought it was the wheel bearing, being it happens around 80 to 100 km an hour, but I changed them, and it's still doing it. I'm going to try this next
@KeepItDirtyOffRoad
Жыл бұрын
Dead giveaway if it’s the IWE system is out the truck in 4wd and see if it goes away. If it does it’s IWE for sure and the check valve is the first thing to check. Then the lines, solenoid, and then the IWE bellows
@LuisJimenez-ko9dp
5 жыл бұрын
It just happened to me noooooooo. 2015 4x4 lariat i put a lift on it 2.5 i thought that was the problem but now that i saw this video this might be it! Thanks hopefully it works
@rolandpoliseno705
4 жыл бұрын
Had the same problem replaced check valve and solenoid, noise gone. Thank you!
@KeepItDirtyOffRoad
4 жыл бұрын
Roland Poliseno that’s awesome man, I’m glad the video was able to help
@renebarragan3912
4 жыл бұрын
Straight to the point ! Thank you
@jessepoulter
5 жыл бұрын
It's been happening since the day I bought my 2018 f150 right off the lot
@TonicofSonic
Жыл бұрын
I had a sudden grinding driving home. I found the vaccume line had become brittle and disintegrate from the T connection on top the driver side strut mount to the solenoid. I replaced the solenoid, the check valve and used a 3/16 od hose from fleetfarm to replace the damaged section as ford did not have this in stock. No more crazy grind but now I have a similiar noise under slight load, I think my actuator and or hub took damage and need to be replaced, maybe even the entire vaccume line. gonna dive into that tomorrow.
@KeepItDirtyOffRoad
Жыл бұрын
Yeah, make sure there is no more leaks in the system and the last step is to check the IWE bellows. If you have to replace the IWE, also inspect the hub bearings. The shavings from damaging the IWE can get in there and damage them.
@sacalanet
5 жыл бұрын
Thanks for the video on the IWE valve. Saved me $$$! Thanks....it was a quick fix.
@KeepItDirtyOffRoad
5 жыл бұрын
that is great to hear and the reason I made the video.
@Figaro0624
4 жыл бұрын
Great information as I was getting the same noise but in my case my hub bearing was bad and was causing the gear to touch
@KeepItDirtyOffRoad
4 жыл бұрын
Yeah, I had something similar because I let mine go for too long. the check valve is the first check of the whole system and 99% of the time its the cause.
@Brittvanegas
5 жыл бұрын
I went out and bought a 1 way check valve for an air compressor. better check valve than the ford product. Also ,sometimes the check valve get moisture inside over time making it not work properly. I had cases were you just blow it out and reinstall it and the problem went away.
@kayotic14
5 жыл бұрын
I have the same thing but I just noticed that the 1st owner did not install the hub locks so I’m hoping I can get the hose that goes down to the hub and new hub locks and hope the wheel hubs are not messed up as well
@chrisdaniel5004
5 жыл бұрын
Apparently there is a TSB from Ford on this IWE issue. I decided to spend the $19.47 Vacuum repair kit and it fixed the problem.
@KeepItDirtyOffRoad
5 жыл бұрын
Yeah, at the beginning of the year Ford released new parts for the whole IWE system. New hubs, actuators, lines, valves, and I think solenoid. What’s included in the Vacuum repair kit?
@davejordan2337
5 жыл бұрын
@@KeepItDirtyOffRoad Kit? I have already ordered 2 of the valves. Now I am wondering if there is more that should be swapped out?
@KeepItDirtyOffRoad
5 жыл бұрын
@@davejordan2337 the check valve is the first thing to check. If you still hear the noise there is more to check. Next step would be the solenoid, then it's off to check the hard parts. Check the Lines themselves for leaks and then its to the hubs themselves for leaks. Check out OZ mechanics video in the notes of the video for how to perform. If your truck is still under warranty take it in for the to take a look at the lines and hubs. Make sure they actually check the lines. Too many guys on here had their hubs replaced without the dealer checking the lines.
@davejordan2337
5 жыл бұрын
@@KeepItDirtyOffRoad I'm good here. I wanted to replace the valve with the new and improved as a preventive thing. Just wondering what was in this kit other then the valve assy.
@KeepItDirtyOffRoad
5 жыл бұрын
Yeah wondering what’s in the kit myself. Have not found any info on it. All I know if the new valve is blue. Old was black and white, new one is blue and white. So if you have the blue check valve you have the latest. Price also went up from $8 to $10.
@chrisdaniel5004
5 жыл бұрын
Thank you for posting the video. Mine started acting up today. Shame on you FORD !!!
@KeepItDirtyOffRoad
5 жыл бұрын
Glad I could help. Hope this fixes it for you.
@markphillips9889
3 жыл бұрын
Big help. Fixed my issue. Thanks!
@KeepItDirtyOffRoad
3 жыл бұрын
Awesome man.
@jasoncraze8268
4 жыл бұрын
I have a 2016 F150 today I was driving down the road and heard the awful noise coming from my driver side put in 4x4 drive it went away drive it home Going to get the parts come Tuesday Hope this will fix it hope it's nothing else
@KeepItDirtyOffRoad
4 жыл бұрын
Jason Craze if you have a leak, the check valve is the first thing to check. Next is the solenoid, then it’s the lines and finally the Hubs
@Eldela5.0
4 жыл бұрын
Thanks man my dads truck is doing same noise I was thinking it was the hub itself but will try this first.
@KeepItDirtyOffRoad
4 жыл бұрын
glad the video could help. it's a simple and cheap first step in troubleshooting the hubs and owe system
@Eldela5.0
4 жыл бұрын
@@KeepItDirtyOffRoad yea will try that first since it just started doing it.
@popsshops
5 жыл бұрын
In reading all the comments, it doesn't seem as if anybody has attributed this to happen only when it's been below freezing as mine does. The colder it is, the longer it takes to go away (usually 2-5 minutes). Went to Ford this morning to explain it to them (played an audio for them) and they mentioned that it might be the check valve so that prompted me to Google it and find this thread. They did ask me to put it in 4WD when it happens and see if it goes away. I'll try that tomorrow morning. We've had little snow this year (yea) so haven't used 4WD since last March. (2018 F150 XLT less than one year in service).
@KeepItDirtyOffRoad
5 жыл бұрын
The noise clearing when you go into 4wd is a clear sign of a vacuum leak. The IWE is kept disengaged using a vacuum. If the grunting goes away when the vacuum is removed it means the check valve, solenoid, or IWE lines have a leak.
@andrewshah10
Жыл бұрын
Hey man did you ever figure out the problem?
@KeepItDirtyOffRoad
Жыл бұрын
Yeah man. Plenty of people having the same Noise all related to the IWE. Easiest components to check first is the valve, then solenoid, then lines and finally the IWE hubs
@andrewshah10
Жыл бұрын
Right on man just today I noticed the grinding, intermittently when slowing down from 15mph 0 and then when slowly accelerating shortly after. Also it has been very cold. I went ahead and ordered the new vacuum check valve hose part number FL3Z-3A788-B on eBay for 30. My question is, how would I know if it’s the solenoid as well? Thinking of ordering that just in case. I read that if you engage in 4 wheel that noise will go away and if it does, then you know the solenoid is working, am I correct? Thanks a ton man
@KeepItDirtyOffRoad
Жыл бұрын
No. The whole IWE system works using a vacuum. By clearing the noise with 4wd you have confirmed there is a leak somewhere in the IWE system. The IWE system is broken down into 4 parts; check valve, solenoid, lines, and the IWE bellows in the hub. You check them in the same order. Most likely candidate (99% of the time) is the cheap plastic check valve. If you replace that and noise continues then I would check the lines for leaks before replacing the solenoid. Video in the description shows you how to check the lines and IWE bellows. Hope that helps.
@michaelloud5206
4 жыл бұрын
Having this problem w my 2010 F150 5.4. It's a grinding/vibration that happens when I accelerate in low gears but while cruising it's fine. I'll give this a shot.
@KeepItDirtyOffRoad
4 жыл бұрын
Loudy 2.0 easiest way to confirm is put it in 4wd. If it goes away it’s a vacuum leak in the IWE system. And the check valve is your first step
@pierreverdoni
4 жыл бұрын
In 2005 My truck did not have a check valve...If I were to jack it up without the engine running the front would be in 4WD. Then upon starting the engine the vacum would pull out the IWE and it would become 2WD..Water got in and rusted the IWE twice in 15 years and took me 2 hours to replace them
@KeepItDirtyOffRoad
4 жыл бұрын
Damn dude, how did those seals leak? Did moisture get in from the vacuum lines?
@pierreverdoni
4 жыл бұрын
@@KeepItDirtyOffRoad I think there is a Ford recall that mentions that the 1st generation IWE firewall mounted vacumn hoses could be filled with water from the windshield..I think the recall mentioned a new cover design
@pierreverdoni
4 жыл бұрын
kzitem.info/news/bejne/kZ9snHhjrmOTeKw
@eltonherrera7524
4 жыл бұрын
Thanks buddy!! What a great video
@78bdhkim
3 жыл бұрын
Thanks for the video. I just started hearing the grind after hitting 20k miles. After seeing your video, I grabbed one from local dealer and swapped it. One question though, does it need to be changed out every now and then?
@KeepItDirtyOffRoad
3 жыл бұрын
As long as you get the latest valve (in blue) it should last years. If you get the old style (black) those fail every few months
@78bdhkim
3 жыл бұрын
@@KeepItDirtyOffRoad thanks again! That’s what I got. Great to know
@albert3732
5 жыл бұрын
Thanks man this shit helped me out a lot! I put my truck on 4x4 and the noise goes away then starts acting up at high speeds hopefully I didn’t let it go for to long gonna replace mine ASAP
@KeepItDirtyOffRoad
5 жыл бұрын
🤞 fingers crossed man. Glad the video was able to help.
@gjhunter9326
5 жыл бұрын
IWE = Integrated Wheel Ends
@Ricardo_C
5 жыл бұрын
Ordered this part , hopefully it fixes it
@KeepItDirtyOffRoad
5 жыл бұрын
🤞 hope it does. Just keep in mind it’s the first step in troubleshooting those hubs.
@paulesparza6522
9 ай бұрын
I’m going tomorrow to get the part from ford. I hope this does the trick
@KeepItDirtyOffRoad
9 ай бұрын
Hope it does too man. Just keep in mind the check valve is the first thing to check in the troubleshooting process.
@cem19771
3 жыл бұрын
does this apply to 4WD only or for 2WD too, cause my truck is making a grinding sound when I'm below 30mph but I also sometimes jerks on taking off so I'm thinking its the transmission.
@KeepItDirtyOffRoad
3 жыл бұрын
4wd only. the 2wd trucks don't have or need an IWE system
@cem19771
3 жыл бұрын
@@KeepItDirtyOffRoad thank you for the reply, i've never had a 4WD truck so very ignorant when it comes to them.
@KeepItDirtyOffRoad
3 жыл бұрын
@@cem19771 no worries man. The only way to learn is to ask. Never a bad question in my opinion
@asdf73521
3 жыл бұрын
Thanks for the video. Im going to check mine soon. Do you still recommend getting the OEM part or is there another brand you'd recommend? I know you used OEM again. But wasn't sure if you'd recommend anything else. Thanks again.
@KeepItDirtyOffRoad
3 жыл бұрын
asdf73521 I don’t think anyone else besides motorcraft makes this part. And the new blue valve seems to last much longer.
@asdf73521
3 жыл бұрын
@@KeepItDirtyOffRoad Awesome, thank you so much.
@robertparker1494
2 жыл бұрын
I clicked the Amazon link and it said the part does not fit my 2018 F-150
@KeepItDirtyOffRoad
2 жыл бұрын
The individual check valve linked is the old valve and you don’t want it anyway. Check the updated Ford link for the blue one. And keep in mind Ford may have updated the part number since this video was released
@2002SilverWRX
4 жыл бұрын
I currently have a grinding noise coming from the front wheels 2018 Raptor, only here and there at very low speeds, only happening to 1 wheel at a time mostly front left wheel in 2wd. Sounds like splined gears that arent engaged the whole way and lightly grinding on them. Im hoping this will fix it and thanks for the vid!
@KeepItDirtyOffRoad
4 жыл бұрын
SuOMinonA hopefully it’s the check valve. The best way to test is next time the noise comes on put the truck in 4wd. If the noise clears it’s an IWE leak. The first thing to check and replace is the check valve. If you still have the problem then it’s time to check the solenoid and then the IWE lines with worst case being the IWE bellow on the hub itself. Most dealers don’t even bother doing a check on the check valve, so do that yourself first to test it out,. if it does not work, take it in. The IWE system should be covered by the powertrain warranty.
@jessegalvan19
Жыл бұрын
Man , i changed my check valves, solenoid , my hub lines aren’t leaking. I think its the one way valves that are custom coming off a K&N intake. My theory is one of those valves stopped working and isnt getting suction in. I had to order a whole new assembly for it .
@antoniobaskerville6823
9 ай бұрын
Thank you
@thomascastro9357
4 жыл бұрын
Thank you, I thought it was my right turbo going out.
@KeepItDirtyOffRoad
4 жыл бұрын
thomas castro glad the video was able to help
@thomascastro9357
4 жыл бұрын
Changed it 20 minutes ago, fixed the problem! 👍
@KeepItDirtyOffRoad
4 жыл бұрын
thomas castro that’s awesome man. It’s why I made the video
@pearsonshsm
2 жыл бұрын
Thanks a lot man, but I have a question about letting it go too long. You say if it does, you have to replace the whole hub. How would you know it's gone too far? Is there a possibility it could leak anywhere else along the line
@KeepItDirtyOffRoad
2 жыл бұрын
It can leak anywhere along the lines, at the connections, or at the IWE bellow itself. If you let it go too long, you will be grinding away at your IWE gear. Eventually those metal shavings get into the hub bearings and they start going out too. I let mine go a little too long and within a few months of filming this video, I had to get both hubs replaced. They started humming and causing vibrations at speed. When they opened them up, they were full of metal shavings
@f1prancinghorse235
3 жыл бұрын
Thanks for the video...I have a similar noise that happens when driving slowly and it happens when I lift off the throttle. When things warm up it seems to go away. For the noise on the video what speed were you going. Gonna try to engage 4wd and see if it goes away.
@KeepItDirtyOffRoad
3 жыл бұрын
As it’s gets worse, speed don’t matter. Clear way to confirm is out it in 4wd. If it goes away you confirmed it’s the IWE system. Then you a need to find out what part of the system is having problems. Valve is your first check, then the solenoid, then the lines, and finally the hubs.
@yenerlopez1887
5 жыл бұрын
My 2016 did that sound last week, was so hard to find where the sound was coming from because I was driving, do you mind if I ask you the name of the part? Please and thank you Great video by the way
@KeepItDirtyOffRoad
5 жыл бұрын
Part number is in the description but it’s called a check valve.
@yenerlopez1887
5 жыл бұрын
Keep It Dirty Off-Road thank you again
@Oogiddyboogway
3 жыл бұрын
Got a chevy ad for this. Gross. I may have to replace my iwe check valve but at least I won't have to replace my self esteem after buying a chevy
@KeepItDirtyOffRoad
3 жыл бұрын
🤣🤣🤣
@codyscarlett8070
4 жыл бұрын
Great video, just replaced mine in hopes it would fix the issue, the grinding noise is still there under acceleration, in 4x4 no noise. Should I check hubs or what next, thanks
@codyscarlett8070
4 жыл бұрын
Noise on the right side only
@KeepItDirtyOffRoad
4 жыл бұрын
Cody Scarlett ok, if you have already replaced the valve, next check is the solenoid, then lines themselves and finally the IWE bellows . In the description of this video is A link to a video on how to check the lines and the bellows. If your under warranty, have the dealer do it. IWE is covered under the powertrain warranty up to 50-60k miles
@Goodcompanywithbowling
5 жыл бұрын
Thank you for the video!!!!!!
@KeepItDirtyOffRoad
5 жыл бұрын
Your welcome. I struggled with that noise for weeks and figured I would pass on the knowledge and help the ford community.
Пікірлер: 623