Just finished this job. Watched your video several times through. Then took the IPad to the back yard and double checked as I went on a few points. Hands down the best how to video I have seen. And I’m not a youngster. No unnecessary chatter. Great work flow. And everything worked exactly as you said. Great job. Thank you.
@GoTechTraining
3 жыл бұрын
Hey NG Ware, that is amazing to hear! Thank you so so much! Mike Becker, Senior Insturctor
@travisbracha9728
2 жыл бұрын
@@GoTechTraining Dude thank you so much for this video! I wish you were close by I would bring all my work to you. I am a carpentry and know nothing about mechanics. But I had a repair shop do this exact fix and it will not engage the 4x4 like it should. It takes some turning the wheels left to right for it to finally engage. When it does engage it still makes that grinding noise but not as bad. They also replaced a solenoid under the hood. Could it be a weak vacuum causing the new actuators from engaging properly? I would greatly appreciate your thoughts on what I should try to test to diagnose. I feel like taking this all apart see if maybe it wasn't installed correctly. I for sure am subscribing to your channel.
@303RcHobby
2 жыл бұрын
I agree great video of how 2
@jetboy770371
5 ай бұрын
This is how KZitem is supposed to work. I'll have to wait a while for my 2020 F-150 to fail but I'll be ready.
@user-vh6dr5rd5l
12 күн бұрын
very self-explanatorial I heard every word thumbs up I will be watching your Channel thank you
@criskulikowski9466
4 ай бұрын
Wow, that sound you got it to make at 6:10 in the video is what I have been searching the whole internet for. Thanks for helping with the solution! Great Video.
@codylewis3775
2 жыл бұрын
After a nightmare situation with the dealer and warranty company I decided I would do this myself. This is by far the best video I found. I really appreciate the great explanation and inclusion of torque specs. This video made the job quick and easy!
@GoTechTraining
2 жыл бұрын
Hey Cody, thanks for watching! Glad the video helped you get the job done. Mike Becker, Senior Instructor
@ricric8293
2 жыл бұрын
Did your truck shake and you can feel bumps in the road.
@nickquik
Жыл бұрын
Anymore now a days, they just guess and guess wasting your time. I hate dealing with the dealerships sometimes
@TrentonHall-ow1ur
4 ай бұрын
Dude you just saved my day I was ready to give up searching and wait for whatever failure to tell me the problem
@TheMborax
Жыл бұрын
Took my truck to a shop to get a sticky rotor off and have them change the brakes. Brought my bearing/hub (was going to drop it in myself before I ran in to that foul rotor) and asked if they could plunk that in while they had the rotor off. They came back and said there was some big complicated procedure including having to keep the vacuum pressure on the whole time etc. and said they weren't equipped to do it. Watched a number of other videos, and this one..and realized it's dead simple. Will never take my truck back to that shop for sure. Great video! Thanks for the help!
@Mark-ux9sp
2 ай бұрын
You are supposed to apply vacuum when you slide the cv axle out and back in. If you don't you can damage the IWE.
@rickrogers2649
4 жыл бұрын
New Yorker here. I never saw a tie rod come apart automatically like that ! I would stop the job and go buy a lotto ticket right away. If I won I'd just pay someone to finish the job then. : )
@GoTechTraining
4 жыл бұрын
Hey Rick, Wisconsin here, I feel your pain! I should have bought a lotto ticket that day...oh well. Maybe next time :) Mike Becker, Senior Instructor
@stevecampanale8402
3 жыл бұрын
I'm from MA. How about those wheel hubs that are suppose to only take an hour to replace?
@tagle2818
3 жыл бұрын
Lol
@magicmic384
8 ай бұрын
Great video! Very well presented. Something I learned while working in Aviation manufacturing is to only let the Torque Wrench click once. Making it click multiple times actually over torques the bolt/nut. You’d be surprised how much over torque that’s causing. I did that for years while working on Aircraft in the military and never knew of such a thing.
@203232crash
2 жыл бұрын
Great video. Explained everything. I had a friend thought his CV axle was bad. So he had me look at it. I'm not a Ford guy so I didn't know about these actuators but I knew it wasn't a CV axle problem. This is exactly what was wrong.
@JKilem
Жыл бұрын
I came across this just learning about 4WD repairs. this is what I need to fix. Off topic of why I was watching 4WD repairs. 4WD engaged but drives like it is having seizures. But I was wondering like. 2 days ago, before this video, why was my wheels grinding but now not... wow, Perfect. Thank you, Sir that is in this video. thank you GoTech.
@GoTechTraining
Жыл бұрын
Hey J. Kilem, thanks for watching! Glad to hear the video helped
@davidblazevic946
2 жыл бұрын
I'll be doing this tomorrow morning, I've watched numerous videos on how to do this and your process is by far the quickest and easiest as far as I can tell. The mechanics in most of these videos appear to be working on vehicles that have never been outdoors, no rust and everything just comes apart. Not a real world scenario. I couldn't even get the dust cover of the axle end without destroying it. Great video, wish me luck!
@GoTechTraining
2 жыл бұрын
Hey David, thanks for watching! Living in Wisconsin, I know how much fun all that rust is to deal with. I hope the job went smoothly for you :) Mike Becker, Senior Instructor
@tylerjbellows
11 ай бұрын
I need to pull my CV shaft and this was the best video I could find on how to get it free of the steering knuckle. Good instructions.
@bigheadwrangler8535
2 жыл бұрын
Used this video as reference of what I was looking for to properly spline the IWE, hub and CV shaft. Good tip on putting the IWE on the hub first! Thank you.
@GoTechTraining
2 жыл бұрын
Awesome! Glad the video helped! Mike Becker, Senior Instructor
@concrete6429
2 жыл бұрын
Damn what a vid, not only performed the job, but explained everything in layman's terms!
@GoTechTraining
2 жыл бұрын
Hey Concrete, thanks a ton! Hope you found it helpful! Mike Becker, Senior Instructor
@concrete6429
2 жыл бұрын
@@GoTechTraining Just opened the parts for my sons suv. Decided on doing the delete kit on both sides. Hopefully this will keep it from having issues in the future. 🤞 Many of us r youtube mechanics, so I found your vid extremely helpful when some of us have nvr done this before. Thx for the reply....take care!
@robgood8730
3 жыл бұрын
Perfect. Thank you. I also noticed a change in my avg fuel economy when I started getting the intermittent grinding sound.
@GoTechTraining
3 жыл бұрын
Hey Rob, thanks for watching! I supposed the partially engaged hub could create some rolling resistance. Mike Becker, Senior Instructor
@rickprice6527
2 жыл бұрын
Awesome video, I wish I could have diagnosed it myself. Now I get to pay the Ford dealer to do the work. The noise sounded just like that with the loss of vacuum and there was moisture inside the IWE as well. I hope someone trained them to do it correctly. Thanks so much for the video.
@efrainhernandez809
Жыл бұрын
Rick how are you doing? How much did the dealer charge you?
@vickiegarza5957
Жыл бұрын
Thank you.....I am not a mechanic but now have a better understanding when I take my 2014 4x4 F150 for four wheel drive issues.
@GoTechTraining
Жыл бұрын
Hi Vickie, thanks for watching! Glad the video was educational for you! Good luck getting the repair done. ~Mike
@mikechiodetti4482
4 жыл бұрын
Looked real good Mike. Could only see surface rust on the upper control arm. I was surprised how easy the nuts and bolts came off. Hopefully that replacement cures the intermittent engagement problems and gear grinding.
@GoTechTraining
4 жыл бұрын
Hey Mike, I try to keep my truck washed. Especially in the winter months! So far so good :) Mike Becker, Senior Instructor
@DDescalchuk57
3 жыл бұрын
I’ve personally had more fail when adding grease. If the engineers wanted that much grease it would of come that way. I install these with what is supplied on it and have had no issues
@nathanceschi5100
3 жыл бұрын
Ditto.
@giobikefans
8 ай бұрын
Did this with your video and another guys. Liked yours cause you had the torque specs. It did actually end up taking most of my day because my rotor was rusted on. Wouldnt come off with a rubber mallet or prybar. I took some other guys advice and used two bolts screwed in through the caliber clamp pushed up against four quarter wrapped in hockey tape. After tightening both bolts back and forth for fifteen minutes eventually the rotor cracked off. But I didn’t have any spare bolts that were long enough and had to go to the hardware store … so it goes
@gidgetcarter2396
9 күн бұрын
Best mechanic I have ever seen.
@bruceh5759
2 жыл бұрын
This is the best video I've seen on this replacement procedure. Like one of the other commenters I seem to be having an issue with what seems to be my driver side not disengaging from 4wd. Getting a dull growl so will try to tackle this myself after watching this. Just waiting on my vaccuum gage to arrive
@jasoncharles6980
11 ай бұрын
Thank you. This is the best IWE replacement I’ve seen - and I think I’ve seen them all at this point 😂
@cessealbeach
3 жыл бұрын
Excellent! My dad has a 2014 FX 4 with 198K miles and was making noise, intermittent , Thank you very much
@bobbyboywonder12
Жыл бұрын
What an excellent video. Good dog you do so damn good. No unnecessary talk or video time, show all the crucial video and talking points. Damn. Loved this video
@GoTechTraining
Жыл бұрын
Thanks a ton Stevie! ~Mike
@robertdavis6708
4 жыл бұрын
Nice presentation Mike. I had one of these IWE failure driving across Missouri on a hot 98 degree day. It sounded like the front end had fallen out on my 2003 Expedition. Seems like water enters the solenoid end, expanding when hot causing the IWE to engage. Scares the H#$L out of one. Probably not doing the axle teeth or IWE any favors also. FMC recalled the unit, placing a shield over the solenoid , keeping water above the cowling from entering the solenoids. Replaced both axles and IWE's and a couple check valves in the vacuum system. Seems OK , never has happened again.
@GoTechTraining
4 жыл бұрын
Hey Robert, yeh the noise it makes is HORRIBLE. Like, pull over right now kinda noise! Glad to hear you got it all fixed up :) Mike Becker, Senior Instructor
@eltazdiaz2163
2 жыл бұрын
@@GoTechTraining buenas tardes amigo tengo un problema con una lobo 2004 no entra la 4x4
@Fredjoe5
Жыл бұрын
Finally, someone shows how to grease it, and what to grease it with! Why is that step left out so often on YT videos??
@GoTechTraining
Жыл бұрын
Hey James, hard to say why so many leave it out. Service info doesn't directly call it out I guess. Either way, it's a must as part of the long-term fix! Mike Becker, Senior Instructor
@charliecasas336
Жыл бұрын
Been trying to find a solution for that noise for 6 months and you nailed it!!! thank you so much
@GoTechTraining
Жыл бұрын
Hi Charlie, Your welcome! Glad it helped you out! Thanks for watching and supporting our channel! ~Ryan Wilsing
@aaronable7842
6 ай бұрын
Your video saved me a fortune!! Was able to do this job in my driveway in under an hour. Thanks for the great instruction! I have a 2012 Lariat Super Crew. This video was perfect!
@jviews1
2 жыл бұрын
I have a vacuum gauge in the cab linked between solenoid and IWE's. This way I see if I have a leak and when there is vacuum to the IWE's. Recommend for anyone working this issue. This should be done AFTER you have tested the 4 components, IWe's, lines, valve, and tank. With gauge you are now monitoring the existence or not of vacuum. I have NOT connected a voltage gauge to monitor the solenoid voltage, but believe if you can to do so. A voltage gauge would confirm vacuum findings or point to the solenoid or voltage from upstream.
@GoTechTraining
2 жыл бұрын
Hey Mike, thanks for watching! Sounds like you're chasing a tough one here! Mike Becker, Senior Instructor
@jviews1
2 жыл бұрын
I am fixed because the components making up the system were checked and triple checked until satisfied. I disagree with the computer program which in 2WD and < 32 F. activates the vacuum 1/2 mile after starting the truck and leaving the house/store. This vacuum activation may be done under torque causing the gears to strip. I would [refer no delay but this is in the computer board.
@technicalitems731
Жыл бұрын
Good idea! Can you make us a video explaining and show this setup and post a link to the video in the comment thread? Thanks so much!
@YT2007XYZ
Жыл бұрын
Excellent Video....now that I have a great idea as to what the problem is, I'll be able to talk with the service department and get the vehicle in for diagnosis and repair. It's really nice to see guys like you take the time to pull a video together like this. I'm betting rather than the short amount of time that it took you, I'm thinking about an all day job for me.. I'll be looking at the other videos on your web site.
@GoTechTraining
Жыл бұрын
Hello, Thanks for the kind words and supporting our channel! ~Ryan Wilsing
@YT2007XYZ
Жыл бұрын
@@GoTechTraining FYI... I had the occasional grinding sound in my hubs and took a chance on replacing the vacuum check valve located near the master break cylinder. Since the replacement, I haven't had any additional incidents with this grinding sound.... Roughly a $25 and 5 minute repair. Hope this helps others..
@johnt6673
Жыл бұрын
@@YT2007XYZ had a weird sound with mine also, it was just the valve also.
@lamarwiggins357
10 ай бұрын
I am finally glad to see a video so plan and clear. This video shows every step of the process. I had to change these same exact parts. I didn't not what the noise was until I watched your video. Great video! It was truly helpful.
@nicknicu1787
4 жыл бұрын
Pretty straightforward job Mike,thanks for sharing it with us! 👍
@GoTechTraining
4 жыл бұрын
Hey Nick, yeh these aren't too bad to do. Thanks for watching :) Mike Becker, Senior Instructor
@JoseFlores-mg6od
2 жыл бұрын
You are a life saver I just bought a truck and it start making this noise after I paid for it😢 now I know the problem is not that expensive
@BurnetteJoe
2 жыл бұрын
2015 f150 lariat with low miles 26,000. I had an intermittent but increasing in occurrence growling noise seeming to come from front wheel. Almost sounded like tire rubbing plastic wheel well but I knew it was iwe. Began late spring cold weather.. went away summer.. came back in cold fall under 60 degree out. I replaced check valve and solenoid bc they are cheap and easy to swap.. didn't work.. rented vacuum pump from auto zone, tested all the lines engine off and while driving.. also pumped up each front iwe at the hub.. everything held vacuum perfectly and vacuum inches stayed solid when driving and while noise was happening (see troubleshoot vids it's easy if you have a pump and attchements). decided to change driver side front iwe and it worked. YOU DONT NEED TO DISCONNECT ABS LINE, just rip out lowest Xmas tree clip to give you slack and you can leave rotor on too.. rented a breaker bar from auto zone to loosen caliper bolts (get full refund when you return tools fyi). Get new IWE on.. pump it up to disengage and them push onto axel.. then release vacuum and twist iwe housing to get it locked in.. then bolt the iwe in. Otherwise this video is good.
@BurnetteJoe
2 жыл бұрын
My rotor was seized on.. left it on.. didn't want to wack it or use penitrating spray. If yours comes off easy then go right ahead and take the weight off.
@IlliniPicker
Ай бұрын
I didn't have to replace mine until 198k miles, so I was happy about that.
@juanr2789
Жыл бұрын
Very helpful video, very good step by step tutorial, thanks for providing the info regarding the grease use on this parts.
@GoTechTraining
Жыл бұрын
Hey Juan, Glad it was helpful! Thanks for reaching out! ~Ryan
@lnb8646
6 ай бұрын
Absolutely awesome and thank you so much for making this video. I was able to order the parts before hand and had everything ready. Then I watched this video as I went along making sure I hit all the right steps. I really appreciate it and it seems to have fixed my issue.
@andysmith9243
3 жыл бұрын
Great video, trying to get my 2013 F-150 fixed and this made it so easy!
@dudemiddleton16
3 жыл бұрын
great video man.. I like the explanation of when you slip the gears back together on assembly. its kind of a sweet feeling but hard to explain it well.. great job dude!!! always enjoy the videos!
@scottschmidtmann2540
Жыл бұрын
Great video! I will be doing this, this weekend!
@johnaclark1
4 жыл бұрын
We always appreciate your videos! Very little rust under that truck for your location...
@GoTechTraining
4 жыл бұрын
Hey Johnaclark1, thanks, I always appreciate your comments! I try to keep it washed, and it's always garage kept. I think those 2 things help tremendously. Mike Becker, Senior Instructor
@markjohnson5081
4 жыл бұрын
Excellent topic for a video. As always... I learned something. I never like to 2nd guess or question automotive engineers for the decisions they make, but a vacuum design?
@GoTechTraining
4 жыл бұрын
Hey Mark, thanks!!! Glad to hear you've learned something today. I enjoy the questioning of everything, it's in my nature to "ask why"...a vacuum design....WHY!?!??! haha! Mike Becker, Senior Instructor
@Driver_1227
3 жыл бұрын
Great video. I need to find one of those vacuum tools so I can see if the iwe is the problem it maybe just a vacuum line. But now I know it's a fairly easy problem to fix. Thanks for putting this out
@ryurc3033
11 ай бұрын
Oh thank goodness you address the brake caliper bolts. Several I messed with had locktite, and were not torque to yield( I had trouble reassuring a customer that it was fine, so he spent the money on new bolts to even though I didn't think it was really necessary). The Torque to yield bolts are honestly a frickin joke. Just seems like it's to make sure they are one time use only.…...what was wrong with normal bolts that didn't get stretched right to the edge of snapping off.
@charleslewis1772
3 жыл бұрын
Charles Lewis Can't thank you enough for the video and instruction. I replaced the drivers side on my 2015 lariat and its all quiet now. Just wondering if i should do the passenger side. It has 91000K on it. Great job Man!!
@joeldoxtator9804
3 жыл бұрын
I just did both at the same time I only have 52000K on mine. The passenger side hub was in two pieces and the drivers side was so lose it would clack and visibly wiggle when you shook it. I would say these hubs have a max life span of about 3 years.
@garystetler4358
Жыл бұрын
I have never seen one of your videos before and I have to say I was impressed. I need this job done on my truck, and the job is a little over my non mechanical head, but at least I understand it enough that I can talk to my regular mechanic. Excellent video.
@roberthogue6797
4 жыл бұрын
Wow. So far 1.1k views and zero thumbs down! Impressive! Nice job.
@GoTechTraining
4 жыл бұрын
Hey Robert, they will come. The thumbs down haters always come. Thanks for watching and not being one of them :) Mike Becker, Senior Instructor
@vadimgheorghita6999
2 жыл бұрын
Step by step, quick and easy, thank you ...🤘
@GoTechTraining
2 жыл бұрын
Thanks for watching Vadim! Mike Becker, Senior Instructor
@martinezsgarage3728
Жыл бұрын
Just started hearing the same noise you are producing at the 6:00 mark, as of today and my truck will be getting looked at on Feb 15th, I’m hoping it’s the actuators that are bad!
@corrymartin1
2 жыл бұрын
Great video- thank you. After having both IWE on the front end replaced twice, I ended up going with a doorman kit that deletes the IWE. Minor change in fuel consumption (since the axles are always engaged), but hopefully solves the issue for good.
@Dani-ELmaninnoboxes
2 жыл бұрын
Mine are always spinning and it does enguage 4 x 4 when i switch on but i was under the impresson it would damage my truck to drive with fromt shaft and axels always spinning??
@Dani-ELmaninnoboxes
2 жыл бұрын
It runs and i just happen to smell gear oil so i changed rear it was fine "ofcourse lol" but the front was shot amd this is when i discovered they always spun is tgis ok
@FBobby
Жыл бұрын
@@Dani-ELmaninnoboxes i wouldnt hesitate to do this. as long as the transfer case and front shaft aren't engaged you won't do any damage to the truck.
@Dani-ELmaninnoboxes
Жыл бұрын
@@FBobby i actually used a brake bleeder 20 bucks worth of refrigerator parts to to engage and disengage,unfortunately the motor crapped out again so I took a total loan out and let em have it lol
@Dani-ELmaninnoboxes
Жыл бұрын
But I appreciate u getting back
@jroque7891
Жыл бұрын
Best video I've ever seen I wish you were close to my area so I could take you my 4 x4 for transit I did a Break job on it and from that moment I have not been able to enjoy my 4 by 4 Van My mechanic did a horrible job putting in those hobb bearings
@GoTechTraining
Жыл бұрын
Hey J Rouge, thanks for watching! If you were closer we could definitely get you all fixed up! ~Mike
@greglamb2559
2 жыл бұрын
AWESOME Vid, with the whole procedure done very well, including torques. THX!!!
@CP_104
Жыл бұрын
Bro... you are great on camera. Thanks!
@GoTechTraining
Жыл бұрын
Thanks man! ~Mike
@granthicks4332
2 жыл бұрын
Thank you so much for this video! It was a great step by step video that made the process really simple
@GoTechTraining
2 жыл бұрын
Hey Grant, thanks for watching! Mike Becker, Senior Instructor
@bradleysteeves7891
Жыл бұрын
Excellent video. Explaination. Video angle-view. Perfect.
@GoTechTraining
Жыл бұрын
Woah thanks a ton Bradley, glad to hear you've enjoyed the vid! ~Mike
@CampingRuss
Жыл бұрын
Bro I just want to tell you that the same sound came from my 2007 Ford F150 lariat just the other day and I had no idea what it was I want to thank you for this video because now I know exactly what to do I just wish my truck didn’t have as much rust as your vehicle being from Michigan salt you know what that’s like inside some pulling it apart I might as well replace a lot of the other parts because everything is rusted out just want to say thank you so much for the video now I know exactly what to do and what not to deal four thumbs up bro ok 👌🏼🔥🤠🔥Camping Russ out
@GoTechTraining
Жыл бұрын
Hey Camping Rus, thanks for reaching out man! That's awesome, hope you're able to get it all fixed up without issue! Mike Becker, Senior Instructor
@jeffreyfrank1194
4 жыл бұрын
thanks mike, looks like everything came apart way too easy for a cold weather truck lol
@GoTechTraining
4 жыл бұрын
Only 60k on a 2016, plus I do regularly wash it in the winter, so that helps :) Mike Becker, Senior Instructor
@shauno3697
4 жыл бұрын
In all fairness, it's only a four year old truck. Vehicles don't suddenly just turn into rust once they arrive in Wisconsin. I would be suspicious about New York cars doing that, though. Ever look at a car in a South Main Auto video? The crust on the cars Eric works on makes most Sconnie rot look like child's play.
@GoTechTraining
4 жыл бұрын
Hahah Shaun, Eric does seem to see the worst of the worst! Garage keeping vehicles around here really seems to help too. Mike Becker, Senior Instructor
@SmittySmithsonite
4 жыл бұрын
Another IWE bites the dust! GM didn't do much better with the 10 miles of vacuum lines, the vacuum servo & vacuum switch, plus the shift fork and failure prone internals on the S-series trucks, or the solenoid and fork on the full size. That's the one thing that hasn't broken yet on my Silverado, lol. It got a new rear diff at 97k, after finding the tips of my side gears stuck to the magnet, which lead to finding the sloppy carrier. What a mess! 21st Century vehicles will keep us busy for a while (until they all rust away to nothing). 😁 Nice paint job on that truck, Mike - she's pretty sharp looking. I spy a J/D X-series in the background there, too - great mowers. I went with a z-turn recently - got too many obstacles to mow around here. I can mow at 10mph, lol - gets it done quick, but beats my kidneys to a pulp. 😂 Anyway, great vid man - have a great weekend! 👍🍻
@GoTechTraining
4 жыл бұрын
Hey Smitty, ugh the ol' shift forks and encoder motors on the GMs...failures are good though I guess. Keeps us employed haha! Thanks, it's a special edition sport package that Ford does. Good eye, it's an X350, 2016. I mow 3 acres...A zero-turn is in my future too, i'd love a Ferris, with their suspension. We'll see. Mike Becker, Senior Instructor
@SmittySmithsonite
4 жыл бұрын
@@GoTechTraining - Ahh, I'd LOVE to have a Ferris! My lawn beats the crap out of me, lol. Suspension would be NIIIICE!! I've got 2.5, so almost the same as yours. The z-turn definitely saves some time, though. About the only downsides are the cost, and they get stuck alot easier than a lawn tractor. If your lawn is high and dry (and flat) this won't be an issue. Anyway, yeah, we'll have plenty of work going forward from the looks of things today! :) Take care, Mike - we'll see you on the next one. 👍🍻
@roadrash1021
3 жыл бұрын
Thanks, this was awesome. Helped me decide to do the IWE on my '11. Only thing I had an issue with was getting the lower arm off. I ended up leaving it attached and was still able to get the fix done. The only thing I think would have helped would have been a mini how to on how to get the ABS sensor cable disattached. That took me an hour+ of puzzling out because I couldn't find anything on the web and pictures of the replacement part were less than helpful. Anyways, thanks much for the video!
@roadrash1021
3 жыл бұрын
Just wanted to add something 2 months later. I think he mentions it in the video, maybe not. Anyways. If you're doing one, do the other. I just found out the hard way, and spent some extended time diagnosing trying to figure out. Off to do the other one.
@Needfreedom8953
2 жыл бұрын
Thanks for the video. Saved me lots of money and made it a fun job for me. Wish I had a lift though!!
@TomofAllTrades
3 ай бұрын
Thanks for sharing! Your video has a ton of information and good production quality 👍
@mikeburton1733
4 жыл бұрын
Hey Mike. That all come apart way too easy. Especially that tie rod end. Nice job. Looks like you are really living the dream!!!! BTW your little ones are telling me daddy needs another mustang. :)
@GoTechTraining
4 жыл бұрын
Hey Mike, it did...almost looked fake on camera, right!? Someday I will. Not until both boys are much, much older though. There are little tornadoes right now. I can't subject a poor innocent beautiful car to them haha! Hope all is well north of the border :) Mike Becker, Senior Instructor
@mikeburton1733
4 жыл бұрын
@@GoTechTraining I had a 1 year old 2007 f150 that had the IWE go bad in its very first winter. I know all about them already. As for the toys....My wife had to take the bulldog to the vet today in my camaro cause its the only car we have low enough for her to climb into without aid of a ramp. That car is covered in dog hair. Lol. I have 4 legged tornados now.
@GoTechTraining
4 жыл бұрын
Ugh, yeh, freaking IWE's...oh man, a bulldog in a Camaro, I bet that was a sight to see. Hope the doggo's alright! Mike Becker, Senior Instructor
@mikeburton1733
4 жыл бұрын
@@GoTechTraining I take my bulldog and my white boxer all over the place with the t roof out. They love there heads out the window. White fur flying everywhere. That wasn't the truck you zip tied all those wire connections to was it? Thought it was a Chevy. Boy time flies.....
@GoTechTraining
4 жыл бұрын
I have a golden retriever, hair everywhere ahah! Same truck, I'm personally a Ford truck guy, no Chevy's for me :) Mike Becker, Senior Instructor
@nathanceschi5100
3 жыл бұрын
No need to pull the caliper and rotor. Just did two of these for a customer. 15 minutes a side.
@GoTechTraining
3 жыл бұрын
Hey Nathan, thanks for watching. Good to know, i'll keep that in mind. Mike Becker, Senior Instructor
@daveshugart2195
3 жыл бұрын
So right!
@yeeeehaaawbuddy
Ай бұрын
"!!~~GRIND GRIND~~!!" "That's a pretty extreme case, but... ...continues to "!!~~GRIND GRIND~~!!"... LOL
@jebsdaddy141
3 жыл бұрын
I long for the days when the front had manual locking hubs like I had on my Broncos.
@jebsdaddy141
3 жыл бұрын
My 2019 F150 with 30,000 miles is doing the clacky sound. Grrrrrrrrrrrr
@stevekenagy616
2 жыл бұрын
Great job of showing how to do this.
@GoTechTraining
2 жыл бұрын
Thanks! Mike Becker, Senior Instructor
@salvadorgutierrezr5914
4 жыл бұрын
Thanks for teaching us Mike🙏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👋👋👋👋✌
@GoTechTraining
4 жыл бұрын
Thanks for watching Salvador! :) Mike Becker, Senior Instructor
@3613jeremy
10 ай бұрын
Thanks you gave me hope that it might not be my flex plate again
@joelfortin9856
6 ай бұрын
Great video, I have to change one of them, this video helped me a lot, thanks for sharing
@mickthedawg4575
3 жыл бұрын
And I was going to take it in! Thank you so very very much!
@GoTechTraining
3 жыл бұрын
Hey Mick, hope this gave you the confidence to do it yourself! Mike Becker, Senior Instructor
@mickthedawg4575
3 жыл бұрын
@@GoTechTraining It sure did! Till I saw your video I was asuming this was one I would not even attempt myself. I have watched the video 3 times, the parts are on order.
@alsafford7143
2 ай бұрын
very informative and helped me to know how to do this job.
@robertrhodes8907
2 жыл бұрын
Red loctite are you crazy lol good luck getting it back apart... Blue is the correct stuff 243 loctite
@fleal6857
2 жыл бұрын
Great Video! Good content and quality shooting.
@GoTechTraining
2 жыл бұрын
Thanks!!! Mike Becker, Senior Instructor
@miahcollins4945
3 жыл бұрын
Definitely a great video great presentation straight to the point and explain of how it works
@Strider666
11 ай бұрын
My 2004 F-150 falls in and out of 4 Wheel Low while driving with the manual gear shifter in 2 Wheel High. It seems to be worse going up hill or down hill. So I decided to check the fluid in the transfer case, and it was bone dry! I filled it up, and I thought it got better, but I was wrong. The Transfer case has a TINY leak from it somewhere. Like a week of it sitting the spot where it leaked was like the size of a silver dollar. Nothing major. While driving it loses power when taking off from a stop, and then you can hear a clunking noise like the 4WD is trying to engage. The light on the dash will show 4WD Low, but then it goes off and it drive fine again for a bit, then the light comes back on and the problems start again. And like I said, for some reason it seems worse going up or down hill. I was stopped on a hill at a stop light today and the 4WD Low light was strobing on my cluster. Just going on and off non stop. Any clue what it might be? I was thinking Solenoid or Actuators, but none of the symptoms scream either of those.
@wmitch927
3 жыл бұрын
When testing the IWE for vacuum, there's no need to put the small vacuum line on. That is just a vent.
@GoTechTraining
3 жыл бұрын
Good to know, thanks! Mike Becker, Senior Insturctor
@wmitch927
3 жыл бұрын
@@GoTechTraining Very informative video. I want your lift! I just replaced the vacuum tube pigtail, IWE, wheel bearing assembly, and upper control arm using jack stands. I'm jealous of your lift! I'm very impressed with the time it took you to do this job, even with the lift. Nice!
@johnturner8829
4 жыл бұрын
Great video and information as always. Good to see you Mike. Hope all is well down there with you and the family.
@GoTechTraining
4 жыл бұрын
Hey John, thanks! All is well with the family here, hope the same for you :) Mike Becker, Senior Instructor
@edjeep
11 ай бұрын
i think i will just take off the vacuum lines and run it full time...thank you for the tip!!
@allencieply234
10 ай бұрын
My rattles when I hit the brakes it stopped was a loose caliper bolt
@danamesarchik3633
3 жыл бұрын
Thanks for the great Video. Really helps us that don]t wrench everyday
@dafarm9814
2 жыл бұрын
Excellent video!
@GoTechTraining
2 жыл бұрын
Thanks Dafarm! Mike Becker, Senior Instructor
@robwhitehead9602
10 ай бұрын
That is one clean truck , good vid. Thanks
@haywardsautomotive6156
4 жыл бұрын
Nice job Mike!
@GoTechTraining
4 жыл бұрын
Thanks Bob! :) Mike Becker, Senior Instructor
@daviddorge1559
5 ай бұрын
Nice job. Thank you for this. Great work
@kc4104again
2 жыл бұрын
Excellent job! Wouldn't change a thing. Thank you!
@misterios1178
2 жыл бұрын
thanks from Chile!
@GoTechTraining
2 жыл бұрын
Hey Favosorno, thanks for watching! Mike Becker, Senior Instructor
@normandfogarty3505
Жыл бұрын
Great video!👍
@GoTechTraining
Жыл бұрын
Thank you! 👍
@shelbyville515
2 жыл бұрын
Mine isn’t really a clicking sound. It has more of a knobby tire sound. I hear it more when I’m coming to a stop between 0-20 mph. I’ve noticed when it’s colder out the noise starts sooner when breaking from like 0-40 mph. You can feel it in the whole drive line. Even feels like you are riding on knobby tires. When it’s 60° and above it hardly does it at all. Do you think this could still be related to the IWE’s? The truck is a 2016 F150 with 42k on it. Also has the 4A mode.
@samhunt5420
Жыл бұрын
Did you figure out your issue? I’m feeling the same.
@emmettthompson3332
4 жыл бұрын
Did that on my F150. Was surprised when the ball joint and tie rod end popped right off.
@GoTechTraining
4 жыл бұрын
Hey Emmett, like I said, I had to put a steering rack in it about a year ago, that's why the tie rod end popped so nicely :) Mike Becker, Senior Instructor
@emmettthompson3332
4 жыл бұрын
GoTech I guess I meant to say that I was surprised my ball joint and tie rod end popped right off. When I did the left side I thought there was no way I could be that lucky on the right side, but amazingly enough it did the same thing! It was a straight forward job. Plenty of time for a few beers when done.
@GoTechTraining
4 жыл бұрын
Hahah sorry, I misunderstood! I love having plenty of time for beers :) Mike Becker, Senior Instructor
@scottdavies8925
21 күн бұрын
Great video.
@OzMechanics
4 жыл бұрын
Let me guess.... check valve! Ok, if that’s not it the 4x4 solenoid!!! If that’s not it the hub!!!! If that’s not it, I’m going to call the reservoir... and just replace everything lol
@GoTechTraining
4 жыл бұрын
Hahah you've had your share of these, right? The IWE is usually what goes wrong around here...gotta love the salt :) Mike Becker, Senior Instructor
@jaysilver7150
Жыл бұрын
Thanks for the help, nicely done.
@oscarrojas4281
3 жыл бұрын
Great job Mike
@GoTechTraining
3 жыл бұрын
Thanks Oscar!!! Mike Becker, Senior Instructor
@briansemder565
2 жыл бұрын
Great video its awesome that ford engineers keep designing junk every year keeps us busy but I fill bad for the customer some have been through 3 sets of these. Dorman makes ones that keep axles locked in all the time.
@GoTechTraining
2 жыл бұрын
Hey Brian, i'm not sure i'd like the axle engaged all the time. I bet it would cause a noticeable drop in fuel economy spinning both axle shafts and the front diff. Mike Becker, Senior Instructor
@briansemder565
2 жыл бұрын
@@GoTechTraining customer stated no fuel mileage change.
@Dani-ELmaninnoboxes
2 жыл бұрын
If my axels spin all the time and no grinding is it possible i bought truck woth said kit
@blainemcdonald6972
2 жыл бұрын
JUST REMEMBER TO CHANGE THE DIFFERENTIAL FLUIDS MORE FREQUENTLY
@JamCar99
2 жыл бұрын
What about wheels jumping on pavement when turning if you have them locked all the time? Not good for tires for one. 🤔
@brentpoole9604
Жыл бұрын
Awesome Video!!
@GoTechTraining
Жыл бұрын
Hey Brent, thanks for watching! Mike Becker, Senior Instructor
@patelvivek4888
4 жыл бұрын
Very informative, great work 👍👍
@GoTechTraining
4 жыл бұрын
Hey Patel, thanks man! Mike Becker, Senior Instructor
@kalnieminen65
Жыл бұрын
Good video. I have this very same problem.
@GoTechTraining
Жыл бұрын
Thanks Kal! ~Mike
@1966cambo
10 ай бұрын
good video, only thing is you keep calling it an IWE but that is not the correct name, IWE or unit bearing or hub bearing is the part with the wheel studs, this i believe is called a vacuum hub actuator (as per your title). Integrated Wheel End......this is not the end hahaha hope you take this comment as it's intended, keep up the good work!
@eurotallertecnicarvedygjoh2923
4 жыл бұрын
Simplemente Excelente Amigo.
@GoTechTraining
4 жыл бұрын
Muchas Gracias! Mike Becker, Senior Instructor
@micharris1761
2 жыл бұрын
wow tyvm this is so helpful, I will be doing my own.
Пікірлер: 542