Thanks so much! Work to Carlysle gen5. Little difference with connectors but easy to figure out on the way. After replacement all my settings are still there. Glued back with sealant. Thanks, thanks, thanks!
@anjolafarouk8360
3 ай бұрын
hello @IvanGazalkent, what kind of sealant did you use?
@IvanGazalkent
3 ай бұрын
@@anjolafarouk8360 The cheapest sealant from Walmart. After time it still holds charge for really long time. Over all replacing was easy and worth the money.
@anjolafarouk8360
2 ай бұрын
@@IvanGazalkent thank you for the reply
@gabnad0638
Ай бұрын
@@anjolafarouk8360What sealant was it in the end ??
@anjolafarouk8360
12 күн бұрын
@@gabnad0638 oh, sorry about the late response. He used a regular sealant (not water resistant)
@Durrutitv
10 ай бұрын
What kind of glue did you use to reseal the back of the watch?
@QUADBOYification
Жыл бұрын
Is There a replacement with higher capacity?
@sharlonkoodie5143
Ай бұрын
So still no idea how to get the battery for this watch or if they have one that's compatible to use with it?
@thedetective00
2 жыл бұрын
This TOTALLY helped so far! I hope it lasts! Has your watch had an issue with shutting off by itself?
@joniskaja3161
Жыл бұрын
Where can i buy this battery ?
@mallolollo
6 ай бұрын
hello, anyone can tell me a site to buy new battery for my gen 6 ? i searched on aliexpress but nothing...
@modvavet
2 жыл бұрын
Did you end up replacing the battery and, if so, do you remember where you found a new one? I'm dealing with extremely short battery life on my fiancee's watch, and I just opened hers to find it's that same APack APP00311 model. Thanks!
@randomfix6306
2 жыл бұрын
I did not replace mine. My battery was good.
@modvavet
2 жыл бұрын
@@randomfix6306 thanks for the reply! I made a few settings changes, so hopefully that'll help. Also emailed APack. I found a TON of their batteries for sale but not a single one of that particular model. :P
@wesharrison6360
2 жыл бұрын
@@modvavet Dealing with the same thing. Something is sunsetted or changed in the update. I wasn't even able to find the battery either.
@johnrichardson1949
10 ай бұрын
did anyone ever find this battery?@@wesharrison6360
@nurwicaksono5804
Жыл бұрын
please make a tutorial to replace the Fossil gen 3 battery
@osvaldocerongalicia54
Жыл бұрын
Cómo pegar los aros de carga???
@_islamovereverything
Жыл бұрын
Thanks alot for sahring this video really helpful
@isabelarzola3929
2 жыл бұрын
What's the batter size
@randomfix6306
2 жыл бұрын
Apack APP00311 300 mah 4.4 VDC See video time 2:31
@kakashi99908
10 ай бұрын
If you stab it with a sharp tweezer then pull up it comes off very cleanly.
@onurylmz1414
2 жыл бұрын
Any idea what to do if the touchscreen is unresponsive?
@randomfix6306
2 жыл бұрын
Nope
@johnrichardson1949
10 ай бұрын
I can't find these replaement batteries anywhere.... anyone have a source for them?
@IvanGazalkent
7 ай бұрын
I bought it on eBay
@ARSENIC56350
2 жыл бұрын
hi ! got the same problem, how did you test your battery ? i found some on ebay but don't want to waste my money if it's not the battery.
@randomfix6306
2 жыл бұрын
The battery lead has 3 small metal contacts on its end. I used a volt meter to find the 2 that were the power and ground and got a voltage reading. It should be between 3.8 and 4.4 VDC. I put mine on the charger for a few hours to make sure it was charged and got the 4.4 VDC reading.
@ARSENIC56350
2 жыл бұрын
@@randomfix6306 thank you for the answer ;) did you finally save your watch ?
@randomfix6306
2 жыл бұрын
@@ARSENIC56350 no. I could not figure it out. I trashed it and got a versa 3. IMHO it a much better watch
@RavenTheLabrador
Жыл бұрын
@randomfix6306 do you happen to know where to get a replacement battery for this watch i took mine out and tested and mine is definitely dead. Anyways if you know where I can get a replacement for this id be extremely grateful as i love my watch and it was a gift from a family member who is no longer with me and means a lot😢. Thank you very much and have a great day.
@VynZography
2 жыл бұрын
Well that jammed in back cover makes this unrepairable without destroying it 😞
@modvavet
2 жыл бұрын
You may have some luck with gently applying a heat gun or hair dryer to it. Not closer than 3-4 inches away, and you don't want to actually get it HOT. Just keep at it for a bit to let the heat penetrate the surface and soften the seal. Try not to make it too hot to touch. After that, you can slowly work an Xacto knife (or other utility blade) under the edges all the way around, prying gently. You may need to reheat it more than once. Just go slow and be gentle. Have a second knife or feeler gauge blade or something similar to insert once you get an edge up, and the rest should be pretty easy. Resealing can be done with black RTV sealant and a toothpick or something to apply a very thin bead around the edge. Make sure to scrape off all the old seal beforehand as any remaining gasket material may prevent the new seal from being really watertight. :) It's identical to the procedure for replacing phone screens these days.
@VynZography
2 жыл бұрын
@@modvavet Probably, But I've had enough of these anti-repair anti-consumer designs. I returned my watch after seeing this.
@Danielism
Жыл бұрын
@@VynZography its waterproof therefore it needs to be sealed...
Пікірлер: 38