I replaced my cat on my 1200 speedmaster with a tec pipe ..makes a world of difference to the sound and i run standard silencers.
@awesomeappleby5923
Жыл бұрын
Bet that's sounds awesome. I'am tempted to do that, but need to save up first I think 👍
@melvynrogers3149
Жыл бұрын
@@awesomeappleby5923 look on youtube removingt the cat on a bsa goldstar ..
@danpos1971
4 ай бұрын
Much better. It sounds British now. Well done.
@awesomeappleby5923
4 ай бұрын
Thanks, those holes I drilled have now all joined up to make one big hole, think it was the heat 😯, sounds even better though 👍
@danpos1971
4 ай бұрын
Probably has more of an open Megaphone sound now.
@lipsee100
Жыл бұрын
Just looking at that exhaust, I think if you keep the cat ,,you could cut off the peashooter end pipe at that weld (you pointed out ) then drill your holes,then weld an end cap (plus hole ) you would end up with a exhaust that looks mega phone style,,quite short and I doubt too load......just an idea
@awesomeappleby5923
Жыл бұрын
That sounds a cool idea, but a bit beyond my capabilities I think. Will have to wait until aftermarket parts are out 👍
@lipsee100
Жыл бұрын
yeah its outside mine too,but I know a man who can!!!
@timharley7599
Жыл бұрын
Does sound a lot better but does removing the baffle alter the mapping. I have heard of someone who removed the baffle and apparently caused the engine to run badly. Took it to the dealer and was told removing the baffle will make the warranty void. Dealer would not repair. Have you heard anything about this.
@awesomeappleby5923
Жыл бұрын
Removal of the baffle does not affect the warranty or the running. Whoever said different has no clue. the 2 Indian owners of bsa , said in their you tube video to promote the bike, said you can remove baffle in seconds... The mapping will adjust itself when you use it. I took my baffle out in march, 7 months ago with no problems. I've also, as shown in my video, drilled large holes in middle baffle plate, 200 miles ago, with no mapping problems or running problems. This bike in general has tickover/ stalling problems anyway, bsa made a new map for it to try to help the problem., but the few people that tried it said it was worse, so had to put the old mapping again. Bsa has still got to work a better mapping out for the future. Baffle in or baffle out, it can still run rough. Does sound awesome now in real life.
@timharley7599
Жыл бұрын
Many thanks for the info. I've just stripped and polished the engine case and it looks really good. Looking more like the original.@@awesomeappleby5923
@kevindarkstar
Жыл бұрын
Wow! I thought the collector box under the stand on the meteor 350 was big 😮
@awesomeappleby5923
Жыл бұрын
I know, the cat on these are massive 🫣👍
@kevindarkstar
Жыл бұрын
@@awesomeappleby5923 bet you there is some weight in that thing, the one on the meteor 350 is 11lb, so added bonus to getting rid of it 😂
@icedidi
Жыл бұрын
nice work
@awesomeappleby5923
Жыл бұрын
Cheers 👍
@kasperkjrsgaard1447
9 ай бұрын
If it was only a plate in the exhaust, I would get me a cup drill in a suitable size, in other words as big as possible, and remove the plate completely.
@awesomeappleby5923
9 ай бұрын
Yes, I might make the hole bigger one day, but at the moment in real life, it's quite loud already.. Someone said they just used a broom handle and slid the silencer over it quite hard and it just popped out 😄👍
@anythingoldmechanical
2 ай бұрын
The FRONT PIPE on these are what really restricts them. Theres a Cat in it!
@awesomeappleby5923
2 ай бұрын
Yes, I've been thinking of making a de cat elbow, to bypass it. because a proper de cat exhaust is about £300 or more and I don't want to spend that amount.👍
@anythingoldmechanical
2 ай бұрын
@@awesomeappleby5923 There's a guy in the UK, who will make you one, that's his speciality. He's on youtube!
@johnmaltby8241
Жыл бұрын
Well maybe BSA will do a sports exhaust 😅
@awesomeappleby5923
Жыл бұрын
There's only one company making a decat exhaust for this bike at the moment, and it's quite expensive, so got to wait for others to make some other style pipes, then maybe the prices will come down 🤞👍
@T3-RIDER
Жыл бұрын
I'm certain delkevic will make one soon
@robertbeighter6336
Жыл бұрын
Still no sign of when they're going to be available in New Zealand 😐 Sounds great tho.
@awesomeappleby5923
Жыл бұрын
Thanks, they have only just got to France, so it might be a while yet to reach you ☹️👍
@4stroke909
Жыл бұрын
Are they definitely coming to NZ ?
@BSAroadrocket
4 ай бұрын
In NZ now in the North Island at Cyclespot Akl and Wgtn
@robertbeighter6336
4 ай бұрын
@@BSAroadrocket I made the full payment half a month ago, but still no bike. Registration issues they tell me.
@mdiz4564
Жыл бұрын
Nice bodge job mate. If you wanted a nice sounding bike, you should have bought a Royal Enfield Interceptor! Nice looking Mahindra though! 🤔
@awesomeappleby5923
Жыл бұрын
I love bodging 🫣😂👍
@mdiz4564
Жыл бұрын
@@awesomeappleby5923 🤣🤣🤣👍🏻
@HorseMalone
8 ай бұрын
Junk the chatty asian silencer and fit an Anglo Mega....Your neighbors will hate you. Thank me later.
@awesomeappleby5923
8 ай бұрын
Might just do that this year 👍
@stephenflynn2375
Жыл бұрын
There's your warranty gone.
@awesomeappleby5923
Жыл бұрын
So if you fit an aftermarket exhaust, your warranties gone, don't think so
@stephenflynn2375
Жыл бұрын
@@awesomeappleby5923 after market is one thing but I don't think drilling holes in it is the same.
@frankmarkovcijr5459
7 ай бұрын
It will never sound like a real Gold Star.
@awesomeappleby5923
7 ай бұрын
Your right, but I wish it did 😁👍
@sv6743
Ай бұрын
Get rid of the cat already no use doing these walkarounds
@awesomeappleby5923
Ай бұрын
De cat exhausts are too expensive, around £300 , so my quick bodge cost nothing. Might do it in the future though 👍
@colindelamare3180
3 ай бұрын
sounds nothing like the dbd as long as you have a hole in your backside you wont make these Mahindra hybrids sound any like the original for simple reason that a high reving short stroke will never sound like the old long stroke low reving engines. No modern bike will recreate the sound of the old british bikes engines are totaslly different
@awesomeappleby5923
3 ай бұрын
Yes, I suppose with all the new Euro rules, it's slowly killing off what a real bike should sound like 👍
@craig6119
Жыл бұрын
Get rid of the cat .
@awesomeappleby5923
Жыл бұрын
I'd love to, but it's around £300 , so will have to save up 😀 This was a poor mans decat😂👍
@craig6119
Жыл бұрын
@awesomeappleby5923 I think your the same person I'm taking on Facebook lol. Yea I know what you mean. At least your making it sound better than standard
@melvynrogers3149
Жыл бұрын
Triumph wanted £300 to decat my speed master .so i bought a paddock stand and did it myself...bit of a faff but there are lots of videos on youtube to show you how its done.
@MrHarleyoldfart
5 ай бұрын
The blanking plate you drilled through can jist be hammered out with a rod, they are only tacked in.
@awesomeappleby5923
5 ай бұрын
Yes, someone mentioned they used a broom handle .. I was the first to do this and I wasn't sure if I fully removed it , it might be too loud. So I thought I'd keep drilling holes until I reached a reasonable pitch. It has quite a unique sound on the overrun, a bit like the old Goldie, maybe all the holes , so I don't know if I knock the whole plate out I might lose that sound. Might knock it out in summer though, something different 👍
@flirtingdisaster
Жыл бұрын
Not really better, just more rattling metallic. Quite annoying.
@awesomeappleby5923
Жыл бұрын
Yeah, the phone doesn't pick up the real sound quality , but sounds awesome in real life, very much like really old British bikes.
Пікірлер: 56