Brillant video . Thanks for sharing your knowledge
@Akkedis-li5tb
4 ай бұрын
Thank you for great equipment!
@beefycuts2100
Жыл бұрын
Thank you, that would be really great, please can you also include the 16kw inverter in training videos please
@scrapyardwars
10 ай бұрын
I wish we could clearly see it had been said in this first video the difference in models, like the eco 8Kw compared to the standard hybrid 8w version. I will keep watching and see if this is covered.
@rajbryanelectrical653
Жыл бұрын
Hi Keith I got 4 sunsynk batteries please advise on the connection of that
@robertguest7808
Жыл бұрын
Will the pontec u500 battery storage work on the inverter.
@ChrisDied
Жыл бұрын
Hi there, im not an installer, but just want to find out if there is a way to acomplish what i want to do automatically... i have a 5kw sunsynk paired with the 5.32kwh battery... now on sunny days I want the whole house to run of the panels and battery, lets say there is more draw for a couple of minutes than the panels are providing, it should take from the battery and never from the mains unless unavoidable, but then i want to reverse that on clowdy days so that it takes nothing from battery and compensates with mains, unless mains are off, then it should go back to battery.
@tobiasjohancoetsee6870
Жыл бұрын
Note on 8KW model: Just took me 2 weeks to figure out that the CT coil pins in SA must be terminated on 5&6 and not 3&4 "CT-L2". Maybe just please update the manual that gets distrobuted in SA. My parents in law installed the system and in the manual it said to terminate the CT coil into pin 3&4, had the invertor on the Zero Export without limited to load. (Load is referred to as the essential line output) Wrong pin termination as prescribed by manual and blew the alarm DC charge box for the security and the gate charge box along with all the PC's power supplies. Settings was ons Zero Export and system was installed by certified electrician, not myself. I had to figure out that to make the CT coil in SA work, you have to use other pins for termination as that in the manual. A update would be great I believe a lot of people are only pulling 20% efficiency that does not have the knowledge, they essentially have it running as a off-grid invertor and then move all the appliances to the load output to supply power, as I believe a lot of installers has the CT coils on the wrong pins and then limited the Zero Export to "Load" output only to not get the 0-0 error with grid feedback when CT is wrongly functioning. The bi-directional ability on the grid input/output is unknown to a lot of owners in SA. Alot of people in SA could be saving a lot more money. Please make effort to correct or to broadcast it, this invertor is amazingly powerful, but I believe there are many on many incorrect installations in South Africa.
@tambo22003
Жыл бұрын
It is already on 5 and 6.
@cjcraigj
Жыл бұрын
Hi, who can I contact about doing a bespoke project in the event industry using your inverters in the UK? Thanks
@sadockkibada329
2 ай бұрын
Excuse sir, may i have online meeting with you to help me because i have my inverter with the problem
@alidonabiduaya2489
8 ай бұрын
Hi there my name is Ali and I would like assistance on this technology sistym to learn more about it
@mesh6969
11 ай бұрын
Does Sunsynk inverters have harmonic filters?
@Marquisoj
10 ай бұрын
Yes
@jonerasmus9399
Жыл бұрын
Can you go off grid with this inverter
@Marquisoj
10 ай бұрын
With the right set-up, yes.
@stevee8698
19 күн бұрын
Its not a BAT-TREE its a ba-TTerY.
@samarkandi2023
Жыл бұрын
Это инверторы Deye,?
@Marquisoj
10 ай бұрын
В отличие от Deye, у нас более продвинутая прошивка, и мы постоянно работаем над улучшением наших продуктов и поддержки клиентов глобально. Нам доверяют установщики по всему миру.
@PVflying
Жыл бұрын
I don’t suppose Keith wants to give away all his trade secrets, but personally I would love to see an explanation of how the inverters synchronise to the mains and maintain the peak shaving functionality where the CT coil helps prevent export of power when not desired. I have seen the very basic videos sun synk have put out, but the level of explanation I would be looking for would be a functional block diagram of what circuitry is in the inverter to achieve all of that functionality. But in an industry where the Chinese will copy everything, I’m not surprised he’s probably not keen to go into details! 😂
@magnetoza
Жыл бұрын
if so interested why not buy one and then can see for yourself? lol .
@adon8672
Жыл бұрын
The Sunsynk made by Chinese. Copying it will amount to copying their own product.
@tambo22003
Жыл бұрын
For a grid tide system, you can output a matched the AC output waveform by using a signal processor IC. Then you will need a control circuitry to take the result from the signal processing IC. Then using switching control, modify the output AC's waveform. There are mathematics and signal engineering involved. The technology isn't rocket science, but its hard to exactly copy what it does. China has a knock off version for everything anyway.
@PVflying
Жыл бұрын
@@tambo22003 thanks, that’s exactly the kind of analysis I’m looking for. The reason I’m asking is I would like to develop my knowledge in this area to see if I can make better use of the cheap generic HF inverters I run in my off grid system. I’m trained as an electronics engineer but wouldn’t put myself above hobbyist level in knowledge really, but some of what sun synk and Deye are doing with their inverters seems really innovative and potentially with wider applications. It just piques my interest 😁
@ianstanley5157
Жыл бұрын
What I would like to see: Not how to link a dongle to WiFi thats in the manual. I want to see what happens if you link to a mesh network and why it keeps dropping the link and doesnt display on the app or pc as online. What happens when the SSID is changed and how to reset the WiFi dongle. We all know that the 2 MPPT's and a 5 kva can hanlde 1+1 string and 13+13 amps, Talk more about the VOC and how the 2+2 and 25+25 amp current works. Adding batteries to an already exisitng system, do you have to pre charge the new battery to the same level as the batteries already connected, or just plug and play. When you change the frequency settings from 60 to 50 HZ and how you have to make sure the limits are adjusted, or you going to sit like a fool wondering why the battery will not charge, or do you need to do a firmaware upgrade for the batteires if you do an inverter firmaware upgrade, what about the app, will it automatically upgrade or do you have to go to the app store and check if there is an upgrade avaialble ( as noted on your phone in the last video). At what point do you need to request that Nancy must do a firmaware upgrade. Maybe take note of all the "stupid" question and emails we send to Paula or CJ, while putting together the training videos. I have read the manauls and wasted many hours watching Sunsynk videos. Lets not forget the high current on the permanant neutral/earth bond, and why it is so important to connect the relay for the neutral earth bond on Sunsynk inverters.
@spacemuis
Жыл бұрын
Yes I hope they come back and answer all your questions.
@banjomirandilla3917
Жыл бұрын
Recently installed a another battery to a previous set up. I also wonder if batteries will balance itself if connected with each other initially or do batteries balance itself via inverter charging
@tambo22003
Жыл бұрын
Ian, that's a lot of question in one go. I am pretty sure they will get back to you soon. The system isn't plug and play at the moment, but they are working on making the series more user friendly right now. Hang tight, updates are coming...
Пікірлер: 28