LARS!!!!! Welcome back man, I missed you. Less than 3 minutes in your new video and I learned something new. Great to have you back!
@cadcamstuff
4 жыл бұрын
Thank you, Ken!!!!!! Glad you found the video useful :-)
@kortt
4 жыл бұрын
Good to see you back. The parameters during dimensioning thing looks awesome. I didn't know it was a thing till today! Thanks!
@cadcamstuff
4 жыл бұрын
Happy you found it useul. Thank you for watching
@NorMaker3d
4 жыл бұрын
The only thing I would prefer to see a different behavior, is that it's just a renaming of parameters, so if you change values afterwards you have to favorite them upfront because it will be a nightmare to find them in the model parameters entities later
@jamesk.lawton
4 жыл бұрын
Welcome back Lars. Your videos are gold. Great pacing, you don't skip or go too fast over important steps and best of all your enthusiasm and cheerful disposition. It is obvious you enjoy doing this. Thanks so much.
@cadcamstuff
4 жыл бұрын
Thank you so much for taking the time to watch!
@Blast357
4 жыл бұрын
as always, I learn something new watching your videos. thanks for your work, really appreciated, looking forward your new videos!!
@cadcamstuff
4 жыл бұрын
thank you so much! Really appreciate you watching!
@iandavys
4 жыл бұрын
Brilliant Lars, you really do make the magic happen.
@cadcamstuff
4 жыл бұрын
Thank you so much :-)
@ChrisSheaffer
4 жыл бұрын
Thanks Lars...I missed you! Your sketching and modeling videos are the best. Glad to see you back in this space.
@cadcamstuff
4 жыл бұрын
Thank you so much, Chris :-)
@allthegearnoidea6752
4 жыл бұрын
I hope you will go back and do another constraint video. I have been using fusion a lot now for a couple of years and still don’t understand them or the sequence they are used. I would also like to see the measurement function improved it works really poorly trying to select the actual point I’m trying to measure. Really glad your back look forward to seeing more.
@cadcamstuff
4 жыл бұрын
Want to make sure you have seen this video: kzitem.info/news/bejne/0aeaxauis2uYo4Y Best, Lars
@devstefancho
4 жыл бұрын
If you wanna have better idea on sketch, I really recommend this video! actually I already know these features but It’s refresh me in good way
@coulterjb22
4 жыл бұрын
So glad you're back! 3D sketch? NICE! i missed that update notice. That's slick. Thanks.
@cadcamstuff
4 жыл бұрын
Thank you so much! Glad you found the video useful!!
@missamo80
4 жыл бұрын
That tip about creating parameters is AMAZING. Will save me so much time being able to create parameters on the fly.
@cadcamstuff
4 жыл бұрын
Awesome to hear! Thank you for watching!!
@shopjay8291
4 жыл бұрын
So glad your back! I have been looking to find someone that has your knowledge and your excellent ability to communicate as well as you do.
@cadcamstuff
4 жыл бұрын
Thank you so much for the kind words :-)
@segpie
4 жыл бұрын
Glad to have you back with us. You have a knack for helping me understand this superb piece of software.
@cadcamstuff
4 жыл бұрын
That is awesome to hear. Thank you so much for watching
@Almodovar333
4 жыл бұрын
Happy to see you back, Lars! :)
@cadcamstuff
4 жыл бұрын
Thank you :-)
@rudiklein
4 жыл бұрын
Professor Fusion is back in class. Missed you and your clear explanations. I have been doing different stuff other than Fusion myself, so the Fusion update sessions help me lot to get back up to speed.
@cadcamstuff
4 жыл бұрын
Awesome to hear! Thank you so much for watching!
@rudiklein
4 жыл бұрын
The 3D sketching is great, but being the experienced noob that I am, it also sets my brain on 🔥
@cadcamstuff
4 жыл бұрын
lol, sorry about that :-)
@jangriesel5056
4 жыл бұрын
Looking forward to get going with Fusion again - -welcome back Mr. Christensen.
@cadcamstuff
4 жыл бұрын
Thank you so much! Mr. Griesel :-)
@deciojuniorribeiro2270
4 жыл бұрын
Great! Lars back to the roots!
@cadcamstuff
4 жыл бұрын
Yes :-)
@evanbarnes9984
4 жыл бұрын
The parameter creation thing is great!
@juansavinon339
4 жыл бұрын
Thank you!!!
@cadcamstuff
4 жыл бұрын
You're welcome!
@jessefabbro2158
4 жыл бұрын
Looking forward to part 2 ! Your videos have helped me a lot in learning CAD !
@cadcamstuff
4 жыл бұрын
Thank you so much, Jesse :-)
@raymanzi1829
4 жыл бұрын
Learning Made fun.... Nobody does it like you Lars, you don't just teach, you entertain. Thank you for all your great entertainment over the years.
@cadcamstuff
4 жыл бұрын
Thank you so much, Ray :-)
@salvadorebertolone
4 жыл бұрын
that parameter from the dimension input is going to save tons of time, awesome!
@cadcamstuff
4 жыл бұрын
Yes. Great work by the development team!!
@IceCreams62
4 жыл бұрын
Welcome back Lars...great work, thanks !!!
@cadcamstuff
4 жыл бұрын
Thank you so much :-)
@colinarcher4566
4 жыл бұрын
I started using Fusion some 5 years ago and I had never used a 3D CAD package before and it was your videos that got me on the correct path. I liked your expression " power user" as I can say I am clearly not one because recently I have got a bit overwhelmed with all the features in Fusion and how and when to use them. So glad your back to give all us lesser individuals clarity.
@cadcamstuff
4 жыл бұрын
Thank you so much for the kind words and for taking the time to watch! :-)
@zodiac0545
4 жыл бұрын
Welcome back Lars , at last can begin to understand all the things they have changed , nobody does it as good as you man
@gerogiousboob
4 жыл бұрын
amen and here-here!
@cadcamstuff
4 жыл бұрын
Thank you so much! :-)
@Johnjvenn
4 жыл бұрын
Greetings Lars, I am super glad you are back.
@cadcamstuff
4 жыл бұрын
Thank you so much, John!!
@Stoneylloyd
4 жыл бұрын
Hey you're back! I cut my teeth on your videos and can't thank you enough for getting me going with Fusion. It's been just over two years now and it led me into 3D printing which I love. Never mind thingieverse, let's design our own stuff. Wonderful. I'm really pleased you're back Lars 👍🏼
@cadcamstuff
4 жыл бұрын
Awesome to hear. Thank you so much for watching :-)
@albertsjoberg1200
4 жыл бұрын
I love the ability to add parameter names at sketch time. I have been setting up the parameter list later and it is a bit of a pain.
@cadcamstuff
4 жыл бұрын
Perfect !! :-)
@EJPARSONSUK
4 жыл бұрын
I'm a hobbyist newbie to Fusion 360 and this video is a revelation; super useful and so well presented. Gonna make life so much easier for me. Looking forward to the next one. Cheers!! 😀
@cadcamstuff
4 жыл бұрын
Happy to hear that you found it useful. Thank you so much for watching
@quito96
4 жыл бұрын
Welcome back Lars, we have missed you.:-)
@cadcamstuff
4 жыл бұрын
Thank you so much! :-)
@ELMARWEISSPHOTO
4 жыл бұрын
Missed your videos to fusion360. Good to see you are back.
@cadcamstuff
4 жыл бұрын
Thank you so much!
@Bradgoodman1972
4 жыл бұрын
Lars, my business has reached an entirely different level thanks to your videos on Fusion 360. I knew very little when I started and thanks to you I now design all my own products from start to finish. Thank you so much Bro. Glad to have you back.
@cadcamstuff
4 жыл бұрын
That is awesome to hear! Thank you for watching and commenting
@archeebookingagent1909
4 жыл бұрын
you are back.. so happy Lars.. you rock
@cadcamstuff
4 жыл бұрын
Thank you so much!
@fredbeyl3616
4 жыл бұрын
Brilliant, helpful as always1 Welcome back, really missed you.
@cadcamstuff
4 жыл бұрын
Thank you so much, Fred :-)
@ricouxstephane1628
4 жыл бұрын
Glad you're back, Professor and great to learn new things. Thanks a lot for demonstrating options I did not even notice!
@cadcamstuff
4 жыл бұрын
Thank you so much :-)
@vansien
4 жыл бұрын
Great to have you back Lars, every time i watch your videos i learn something new, something helpful to me and my cad modelling. Your videos are produced excellently and its easy to follow and understand what you are discussing. Thank you.
@cadcamstuff
4 жыл бұрын
Thank you so much for the kind words and for taking the time to watch
@kwasg3
2 жыл бұрын
Thanks Lars, been watching your vids for couple weeks now, and this is the newest one I have seen. Getting proficient at F360 seems daunting in theory, but you make it seem doable!! Thank you
@thomasandkimcowieson8340
4 жыл бұрын
These examples make the components I’d like to create seem possible. Keep the examples coming!!!
@cadcamstuff
4 жыл бұрын
Awesome :-)
@allengibson7346
4 жыл бұрын
Lars, I knew I was missing you and your guidance, I realize now just how much! Thanks for returning to the channel. You teach the way I learn, so cool. So good to have you back.
@cadcamstuff
4 жыл бұрын
Thank you so much, Allen :-) Thank you for taking the time to watch!!
@ricksable
4 жыл бұрын
Glad you are back, I missed you and still have a lot to learn.
@cadcamstuff
4 жыл бұрын
Thank you so much! :-)
@bosnianswede
4 жыл бұрын
Getting better and better! Finally one can name the parameters directly just as in SW.
@cadcamstuff
4 жыл бұрын
Thank you for watching!
@robocog
4 жыл бұрын
Awesome to have you back! - good to see the HAAS still doing it's thing in the background Hope all is good with you and family :D
@cadcamstuff
4 жыл бұрын
Thank you so much!! Yes, the Haas is still looping the same program as list year :-)
@MR-v1s
4 жыл бұрын
Welcome back Lars.
@cadcamstuff
4 жыл бұрын
Thank you! :-)
@TheDaveOutlaw
4 жыл бұрын
Thanks Lars .. glad your back .. the new UI threw me for a loop on your older videos .. I eventually figured it out .. this was a little frustrating as I needed to continue , I understand changes can be a little overwhelming when you have worked so hard on the lessons with the old UI . Now that you figured it out I am looking forward to the new Lars videos
@cadcamstuff
4 жыл бұрын
Thank you for watching and commenting, David!! Have an awesome day!
@stanjanssens1618
4 жыл бұрын
Happy to see you again. I love it
@cadcamstuff
4 жыл бұрын
Thank you so much!
@davidhernandez9985
4 жыл бұрын
Welcome, back to the grid Mr.Christensen, I'm creating a program to fuse architecture,& engineering with 3dprinting machine have respect coders for sure. It difficult as hell feeding this from template to programing. Stay fit L.C.
@josephcarlat9414
4 жыл бұрын
Thank you sir. Scale the entire sketch will serve well....
@cadcamstuff
4 жыл бұрын
Perfect! Thank you :-)
@HowardAlison
4 жыл бұрын
Thanks Lars. I was wondering where my sketch set parameters were going. Will give this great new feature another try.
@cadcamstuff
4 жыл бұрын
Thank you for watching!!
@ChefRuss555
4 жыл бұрын
Thanks Lars, great to see you back. Your Chanel has taught me so much. Will the live streams start again at some point? Why would you use extrude instead of press pull, or vice versa?
@cadcamstuff
4 жыл бұрын
Thank you so much. Livestreams if I can find the time :-) Press Pull can Extrude, Fillet and move faces all in one. Extrude just Extrudes...Use which one you are comfortable with :-)
@ChefRuss555
4 жыл бұрын
Lars Christensen thanks man, thank you for taking the time to reply.
@barrythompson8813
4 жыл бұрын
Welcome back ! And thanks for using the metric system (most of the world does ;-)
@cadcamstuff
4 жыл бұрын
You are so very welcome :-)
@DennisLovelady
4 жыл бұрын
Very useful. I use parameters all the time, and had completely missed the possibility to define the parameter at the time it’s needed. Excellent!!! Thanks!
@cadcamstuff
4 жыл бұрын
Awesome that this was useful! Thank you for watching!!
@dancollins1012
4 жыл бұрын
Hey Lars, so glad the King of F360 has returned! How would you model a scissor lifter efficiently? There's a lot of joints to keep track of, and any inconsistency between them is challenging to identify and correct
@cadcamstuff
4 жыл бұрын
Thank you so much Dan! That would be a good video topic :-)
@NorMaker3d
4 жыл бұрын
Happy to see you again. I learnt a lot with your videos years ago!! 👍😁
@cadcamstuff
4 жыл бұрын
Awesome to hear! Thank you so much for watching
@channelvr1293
4 жыл бұрын
Been looking forward to new lessons... Yep this was inspiring. 👍👍 Keep them coming 😁
@cadcamstuff
4 жыл бұрын
Awesome! Thank you for watching!
@ninjasurvive
3 жыл бұрын
simply brilliant lars love the way you introduce 360 to a newb like me....
@watwsplace8614
4 жыл бұрын
☺ happy your back, love your style
@btan4209
4 жыл бұрын
Yes, Lars is back and now we can get the most out of our Fusion 360 learning climb. Wonderful
@cadcamstuff
4 жыл бұрын
Thank you :-)
@markblackwell1513
4 жыл бұрын
Great to see you back missed your videos.
@cadcamstuff
4 жыл бұрын
Thank you, Mark :-)
@uksimgaming
4 жыл бұрын
Excellent. Learnt a couple of things from watching your video.
@cadcamstuff
4 жыл бұрын
Great to hear. Thank you for watching
@mattinkel7342
4 жыл бұрын
Great to see you back sir .. love your teaching style
@cadcamstuff
4 жыл бұрын
Thank you so much
@makerbit3970
4 жыл бұрын
More of the 3D Sketching! Kinda reminds me of a part of “google sketchup” that I miss. Good job Fusion! Sorry Sketchup, I still won’t come back to you🤷🏻♂️
@cadcamstuff
4 жыл бұрын
Thank you so much for watching!
@stevesmith37
4 жыл бұрын
Great your back Lars, as usual learnt new stuff thanks.
@cadcamstuff
4 жыл бұрын
Thank you so much, Steve
@INSIDEHARDWARE
4 жыл бұрын
Glad you are back! Also, you remind me of Christoph Walts!
@cadcamstuff
4 жыл бұрын
Thank you :-) Not the worst guy to be compared too
@jonnafry
4 жыл бұрын
Thanks Lars ... great intro to these new features in your positive and accessible style - look forward to the next vid.
@cadcamstuff
4 жыл бұрын
Thank you so much :-)
@ImolaS3
4 жыл бұрын
So glad you are back!! now stay here :)
@cadcamstuff
4 жыл бұрын
lol, thank you :-)
@Toolauction01
4 жыл бұрын
Welcome back! Parameter names....finally! Biggest thing I missed coming from Inventor.
@mcorrade
4 жыл бұрын
Man am I glad your back!!!! These commands are GREAT! I had learned about the Loft command the other day and it save a project but, your take is even more clear. And I had no idea about the surface tool box as well as all the other commands you've shown here. I feel like I just upped my skill level a full grade because of this video.
@cadcamstuff
4 жыл бұрын
Awesome to hear!! Thank you so much for watching
@jimanderson8173
4 жыл бұрын
WOW!!!! Good to have you back!!! Thanks for the tips!. I did know one of these tips but I learned a lot!!! Thank you!
@cadcamstuff
4 жыл бұрын
Awesome to hear! Thank you so much for watching!
@Nate-vo6lp
4 жыл бұрын
welcome back missed your videos I've recommended you in the 3d print world for people asking how to draw up there own parts
@cadcamstuff
4 жыл бұрын
Thank you so much :-)
@Lusietealfa
4 жыл бұрын
Great to see you back, Lars! Best regards from Argentina🇦🇷.
@cadcamstuff
4 жыл бұрын
Thank you so much, Eduardo. Hope you are doing well
@BlackSmokeDMax
4 жыл бұрын
Glad you reminded me about setting up parameters within dimensions, totally forgot about that already!
@cadcamstuff
4 жыл бұрын
Perfect. Thank you for watching!
@benco1163
4 жыл бұрын
Good seeing yoiu back Lars! Just started my journey with your older videos a little over a month ago. They've been really helpful and was recently able to make a replacement part on my 3D printer that saved me $30 if I would have bought a replacement part. Looking forward to learning some more with you.
@cadcamstuff
4 жыл бұрын
Thank you! Thank you for watching!
@jacobjackson6513
4 жыл бұрын
bloody great to have you back , Ive got a slide on camper design going on and i need some more videos to help me complete it lol
@cadcamstuff
4 жыл бұрын
lol, thank you, Jacob :-)
@ronzoot602
4 жыл бұрын
I just started with F360 and always see videos with the old F360, With this video I learned a lot, Where did the constraints go and was searching for a few days: (Now I see that they are just at the top. Thank you very much for another nice educational one.
@cadcamstuff
4 жыл бұрын
Thank you for watching!
@JimboJet737
4 жыл бұрын
Thanks Lars. About time you can simultaneously add a new parameter value and it’s name. I never really understood why it wasn’t an existing feature.
@formulajake1996
4 жыл бұрын
Hey Lars! We are grateful to have you blessing us with your knowledge 😄 random question, I heard that when making a part you should make a component before modeling it. Right now I have an assembly with over 100 different parts that I didn't make into components. I simply inserted them into my drawing. Is this an issue? I would rather not recreate all of these parts. Thanks again!
@cadcamstuff
4 жыл бұрын
Hi Jake, It is called "Rule 1" on the forum. No, you don't have to start over. There are some benefits to do rule number one, but I would doubt you will have to do it
@paultynan1709
3 жыл бұрын
The 3d sketching improvements are great for anyone building car chassis. Thanks.
@cadcamstuff
3 жыл бұрын
Hi Paul, Thank you for watching! Yes, I like the new 3D Sketch command
@marclemaire9512
4 жыл бұрын
Great to see you again. As always, really useful tips
@cadcamstuff
4 жыл бұрын
Thank you so much! Thank you for watching
@VegasGuy89183
4 жыл бұрын
Lars, it is great to have you back. You never fail to teach me new and new to me features.
@cadcamstuff
4 жыл бұрын
Thank you so much!
@davematthews7686
4 жыл бұрын
I am so glad you are back. As always you hit a few things that made me say - I didn't know it would do that.
@cadcamstuff
4 жыл бұрын
Awesome! Great to hear that this was useful. Best, Lars
@TurbineTed
4 жыл бұрын
Welcome back, didn't know about the scale thing and I think this will be really useful as I sketch most of my stuff the same way you do. Many Thanks.
@cadcamstuff
4 жыл бұрын
Glad to hear that you found that useful! thank you for watching
@michaeldodson879
4 жыл бұрын
A pleasure to have the master teacher back. You were missed!
@cadcamstuff
4 жыл бұрын
Thank you so much :-)
@Airisshh
4 жыл бұрын
Super nice!! Hope the deal with Autodesk will keep you going for a long time. This is super useful for beginners/intermediate users who will become pros in the future and bring money into autodesk, improving the products even further.
@cadcamstuff
4 жыл бұрын
Thank you! Yes, I also hope they keep me employed for a long time :-)
@TheYochims
4 жыл бұрын
WOW! You've lost some weight! Congrats...lookin' good! (I hope it's healthy weightloss...not illness.)
@casio007
4 жыл бұрын
hope not cancer
@Stoneylloyd
4 жыл бұрын
That's a bit thoughtless old chap. He's looking good and I've missed him.
@TheYochims
4 жыл бұрын
Lloyd Housley , I agree. Regardless of the reason for weight loss, looking WELL and TRIM! (Meanwhile, Lars is wondering why there’s a conversation going on about his weight! 😆)
@cadcamstuff
4 жыл бұрын
lol, Thank you everyone :-) Yes, I'm totally healthy. Just decided it was time to cut back on dessert
@jackoclub
4 жыл бұрын
Glad to see you're back... I really like the way you teach, it's a precious gift!
@cadcamstuff
4 жыл бұрын
Thank you so much, Dan
@EZ_shop
4 жыл бұрын
Excellent! Glad to have you back.
@cadcamstuff
4 жыл бұрын
Thank you :-)
@rjustison
4 жыл бұрын
Good to see you back making Fusion 360 videos.
@cadcamstuff
4 жыл бұрын
Thank you so much, Bob!! And thank you for watching
@theveel1967
4 жыл бұрын
I'm glad to see you back in good health! Love yours enthusiasm and Scandinavian accent 🤘
@cadcamstuff
4 жыл бұрын
Thank you so much :-)
@lindsaycripps1597
4 жыл бұрын
Great to see you back Lars. Been going through your previous videos, but the going has been hard at times because your Fusion 360 was an older version than mine, and there were differences but still great. Now we are both using the same version. Looking forward to learning more now.
@cadcamstuff
4 жыл бұрын
Thank you so much! Thank you for taking the time to watch
@mstoops69
4 жыл бұрын
Great video Lars! Welcome back!
@cadcamstuff
4 жыл бұрын
Thank you :-)
@tharon6530
4 жыл бұрын
Lars, 1st let me start by saying welcome back, you have been very missed; 2nd I started watching this video, much earlier than normal for me, and the moment you went up and selected the "Slot" command, my mind suddenly went BOOM, and smoke began bellowing out. LOL. I have been trying to design computer case components out of carbon fiber, using F360 for the virtual design, and have been doing each "punch through" by hand. I am still learning to use CAD, and all these little interjects are so helpful.
@cadcamstuff
4 жыл бұрын
Awesome to hear :-) Thank you so much for commenting and watching!!!
@deanroadifer6013
4 жыл бұрын
Thanks for all the great tips.
@cadcamstuff
4 жыл бұрын
You are so very welcome
@Section59.
4 жыл бұрын
Welcome back. Thanks for your excellent tutorials. :)
@cadcamstuff
4 жыл бұрын
Thank you so much!
@jonrogers3760
4 жыл бұрын
great to have you back, now waiting for a stream of have to watch videos!!
@cadcamstuff
4 жыл бұрын
Thank you :-)
@paulreader1777
4 жыл бұрын
Interested to know your and your viewers opinions on the latest restrictions on the use of the personal free version of Fusion 360. Autodesk appears, predictably, to be going down the Adobe path with regard to revenue protection. Those of us using open source such as FreeCAD and Blender are open to assisting anyone needing to move away from paid software.
@michaels3003
3 жыл бұрын
Software development is extremely labor intensive, therefore expensive.
@paulreader1777
3 жыл бұрын
@@michaels3003 Yes the open source community is fortunate to have so many dedicated coders
@julesmarcu5635
4 жыл бұрын
Good to have you back
@cadcamstuff
4 жыл бұрын
Thank you :-)
@InfiniteCraftsman
4 жыл бұрын
Hmmm, Lars, you’re back, just in time for AD to nerf personal use😢
@13OleStig
4 жыл бұрын
Great to see you back again
@jeromeherron4195
4 жыл бұрын
Great to have you back. You are a very good teacher.
Пікірлер: 566