Hey guys, Ever wonder how to safely repair Leaking gas tanks with no flame or welding? Well, stick around. Kick back and watch an old timer trick I learned many years ago.
Mr Issac, 50 years ago I watched a old welder repair our fuel tank. He started his Lincoln and ran the exhaust from it into the fuel tank. Then he brazed the holes in the tank. For filler rod he used coat hanger and bailing wire. 🤔😉😁
@MaximumEntropyLLC
Жыл бұрын
Great video as always. You remind me of my father (even though we are probably the same age), very resourceful. He had a trick for everything and never seemed to be stumped. I recall asking him once, "Why don't we just go to Ace and buy a replacement part." His response was, "What do you think we used to do before an Ace Hardware or a Home Depot." Puts everything in perspective. Your son will one day look back and say, "WWPD", What Would Pop Do.... I know I do.
@bigunone
Жыл бұрын
I used to always carry gasket material in my car tool box, living in the SW sometimes you could be miles from town and no one else in sight
@davidsellars646
Жыл бұрын
Too many people fix everything with a checkbook. Great seeing someone who will find a way to get it done.
@WorldPowerLabs
Жыл бұрын
@@bigunone I carry gasket material, lengths of various diameters and types of hoses, set of tools, Hylomar Blue, zip ties, o-ring assortment, baling wire, extra fluids... yeah, I drive "beaters".
@mattmcshane2079
Ай бұрын
This guy is pure 100% craftsman !
@mikec6831
Жыл бұрын
I knew those were soldering irons, but I did not know the leather gasket trick! Thanks for sharing that with us.
@patrickhenigin4805
3 ай бұрын
Old time muffler man here. We would send the customer out to fill the tank so it wouldn't explode. Then heat up the massive copper soldering iron with a torch. One of us would solder the hole while the others would take a break, away from the pit.
@blackbuttecruizr
Жыл бұрын
Soldering is an underappreciated form of fabrication, great vid!!!!
@mikeiver
Жыл бұрын
I have welded on tanks many times with no issues. They were drained, opened, dried of fuel, and then flushed with air from the compressor. Lastly, I flush and fill with argon before welding. My reference is to use silver solder for such repairs over electrical solder but your fix will hold just fine as long as you got the surfaces cleaned and properly fluxed. Speaking of flux, Nokorode is fantastic for the sort of repair you did here and would have helped with the wicking of the solder into the interface. If you had cleaned bothe surfaces, coated them with the flux, and then done a ring of .060 solder around the step of the bung then pulled it into position and heated the parts, it would have been done in 2 minutes. Done a boat load of this sort of thing in the past. Lots of ways to screw a pig. As always, fantastic and down to earth non pretentious videos is what makes your channel a must subscribe.
@lorka42
Жыл бұрын
I used this on my gas tank and all it did was melt the plastic :D good one!
@stingray427man
Жыл бұрын
He had me at, ”oh and its not JBweld.”
@garyyorke1080
Жыл бұрын
Really enjoyed this video more old style repair than the usual welding . Shows you can never beat some of the old tricks thanks
@gliderp
Жыл бұрын
In my youth, after high school and before attending tech school, I worked at an Exxon station for 2 years or so. That's back when they were garages and not just a place to buy coffee and twinkies. Not being a certified mechanic or anything I did shocks, batteries, ball joints, rocker cover gaskets, etc... All simple stuff. Also made a ton of $$ towing cars nights & weekends. Not bad for 18 / 19. I clearly remember our "ace" mechanic repairing a leak in some shitbox. Simple tank with the filler that came out behind the rear plate. (It was the late 60's / early 70's.) His plan was to solder a penny over the pinhole. Not a bad idea except for one thing. He drained the tank, but didn't fill it with water to displace the fumes. I saw that, and said NOPE, and left the area. Care to guess what happened? the tank came back and identified as a cage ball. Same "ace" couldn't balance some wide ovals that were popular back then. So, I opened the book, read the instructions, and balanced the tires perfectly. Not the only time shamed him. He didn't like me much after that.
@lwilton
Жыл бұрын
The old trick for a pinhole in a gas tank was to run a sheet metal screw into the hole most of the way, put some flux on it, then solder it, screwing it the last quarter or half turn in while the solder was wet so you were sure you had solder around the threads and under the screw head. Didn't even need to drain the tank to do that.
@garymucher4082
Жыл бұрын
When you ever have to solder something like that again, use some paste flux on the part and when the temperature is hot enough to melt the solder, it will pull the solder into the joint like magic. You will see it wick it in and seal very easily... But great job anyway...
@ICWeld
Жыл бұрын
Thanks for the pointer. I appreciate that.
@douglasthompson2740
Жыл бұрын
Coleman used to make a great gas blow torch that heated those babies up in no time. Way hotter than a propane torch and a bigger flame. Of course when really in use they had a burner the irons sat it. Back as late as the twenties and thirties the plumbing trade used them for cast iron pipe and the electricians soldered all their connections using insulating tape and a cover tape to complete the job. A lot of guys breathing a lot of lead! Roofers used to solder copper gutters and some flashings as well. Nice fix.
@jeffcarder3545
4 ай бұрын
Ha Brother I'm Jeff Carder and just wanted to say hi and I have too of those copper Irons and used to fix gas tanks that way ,, a long time ago,, Ha Ha also if you have a hole in the tank you can cover it with a penny and solder it and it works great. I am subscribed to your channel and watch you all the time I really like your truck too Keep up the great work on your videos and thanks for making them Great Content Thanks Again Jeff Carder
@jbkbrand
Жыл бұрын
It’s not called JB WELD with you around it’s IC WELD the difference is yours works theirs doesn’t. Being a leather craftsman I make a lot of gaskets from extra leather. Coated with axle grease it will seal pretty much everything. You brought back some memories for me. Thanks for sharing
@budlvr
Жыл бұрын
We used to run a commercial sheet metal shop and soldered all of our hand/brake formed gutters with irons. We had a natural gas oven big enough for two irons on the work table. Only thing we did different was use a light brush of muratic acid before soldering a joint; maybe not with a gasoline tank though? Great Old School work IC ! Hope you used gasoline style tape on the petcock!
@JRPalak
Жыл бұрын
That is the first time I have ever seen a soldering iron being used on that type of repair. I like seeing older type tools still being used for a current day project. 👍
@lordbyrom100
Жыл бұрын
So brilliant yet so simple I used those type of soldering irons 52years ago as an apprentice!! So cumbersome to use you did well on a small part like that .We had a small furnace type arrangement to put them in to heat them …it was coal gas fired ….a trip down memory lane for me 😅😊😊😊😊great video …as usual
@sumduma55
Жыл бұрын
About 35-40 years ago, my neighbor used one of those soldering irons to dope lead into body panels he was repairing. It was one of those old cars with the fins and looked like the lights were in tubes. He said it was lead. Could have been solder for sll I know. He had sticks about as big as your thumb and probably a foot long that he dabbed and smeared to fix imperfections in bodywork and blend seams.
@manga12
Жыл бұрын
@@sumduma55 something not often taught anymore, as those kinds of cars are not common anymore and lead we all know is dangeous to breath, and all the restrictions today about its use, but they just dont think about using those kinds of things anymore cars are built differant. as for the large irons yea I saw those at a festival called jonny appleseed up here in indiana a guy was using copper irons to souder up tin crafts, as it has to be done old school though normaly would use electric as it is more conveniant and said he had to wait till he was 35 before his dad would even let him use on of the old style irons since it was differant, and he had to be good enough to use it or something like that, but yea using a torpedo heater to heat up and old coppoer soudering iron to fix an old car heh thats old school
@elitearbor
Жыл бұрын
Your video thumbnail made me smile! I have an old Turner 39A (a gasoline blowtorch, no kidding!) and a soldering iron like that one, but smaller. It fits in a little holder on the blowtorch and puts it right into the hottest part of the flame.
@jameswyatt1304
Жыл бұрын
What's old is still new some days. I had to get a large 300W soldering iron because my 200W ones were too weak for some battery terminal work on our electric motorcycle project. You about can't use too much flux. The sheer variety, clarity, and information in your videos is a great joy and example for others.
@ronharrison1776
Жыл бұрын
My Dad had a blow torch that held one of those soldering irons and used it quite often .
@peteacher52
Жыл бұрын
Always something interesting including the correct way to use old soldering irons, one of which I inherited but couldn't figure out the best way of using it! Thanks Isaac. 😊
@dadsrock4252
8 ай бұрын
I filled one with water and brazed it worked well .I love your content.
@arustydodge2111
Жыл бұрын
Awesome ISAAC! 👍 First time I saw the iron used. Have one from an old neighbor. He had told me that he used it for seaming the old steel gutters with lead. Fantastic repair! ⭐️⭐️⭐️⭐️⭐️
@seanmcdonnell1282
Жыл бұрын
Love the leather gasket! I have several antique tractors and each still has a couple original leather gaskets and seals. Hard to argue with a material that still seals after 70+ years
@spudcloyd5021
Жыл бұрын
Nice to see old cars on your channel like to see more of that 57 Chevy
@gl9412
7 ай бұрын
Nice job. Yep, my Grandfather did all his metal gutters with irons and solder (1960's) - for years I thought that was the only way LOL.
@jeffjones4006
Жыл бұрын
My father fixed a radiator once with 15 holes with one of those. And there was no leaks the first time. Then he got an electric one I now have that one. Great work.
@sweetpeaz61
Жыл бұрын
Great vid Issac, I have a whole load of those old copper soldering irons, used to use them a lot for repairing radiators and occasionally get to use them now. I love the old school methods..i guess that makes me a bit of a dinosaur these days :)
@philliphall5198
Жыл бұрын
I got at least 10 over the years
@nikostosniklaas7500
Жыл бұрын
Wow - you're taking me back to my child-hood years watching and latter on helping my grandad using his old Paraffin Brass Blow torch heating up his soldering irons when soldering radiator core to the radiator tanks - that was some tricky work though. Keep on showing us some yester-year methods which has almost died out. Thanks so much. 👏🏽👏🏽
@bradgotschall3259
6 ай бұрын
Great content as always. I never get tired of using this old school proven methods. I’ve got several of the old soldering coppers but haven’t ever tried as I have a couple large electric soldering irons large enough for tin and copper work. Love your channel and content 👍👍👍
@fgllc
Жыл бұрын
OMG.. I learned to solder with those. We called then Cooper's irons.... Brings back good memories!
@assessor1276
Жыл бұрын
Great job! SUGGESTION: for fuel-soaked locations on my vintage bikes I use a gasket goo made by Rolls-Royce for aero engines. It’s called Hylomar Blue and you can get it online or from aircraft maintenance shops. One tube will go a loooong way and it is impervious to just about anything.
@ICWeld
Жыл бұрын
Thanks for the idea!
@assessor1276
Жыл бұрын
It really is great stuff - never hardens and keeps gasoline where it is supposed to be.
@BruceBoschek
Жыл бұрын
Great stuff. My 1954 Yazoo mower is sealed up with Hylomar Blue! 🙂
@MBwelding
10 ай бұрын
That’s a cool old tool never seen one of those old irons before but I’d definitely keep an eye out for them at garage sales
@shaneharrison4775
Жыл бұрын
Always a great job and I sure won't say a mumbling word to a solitary sole
@MrBgwolf
Жыл бұрын
When I was a young man and thought I was invincible I welded on a gas tank of a 65 ford falcon. To do so I started my motorcycle up and ran the exhaust in to the tank. Lucky for me it worked.I did wash it out first and let it dry for a few days first.
@jeffterhune8573
Жыл бұрын
Great video, very educational, my father, rest his soul, was very resourceful like you. Learned a lot from him, and you. Thanks again for your wisdom.
@petermccuskey1832
Жыл бұрын
A man of many hats. As a young man I help a neighbor use soldering tools like those to repair a body on an antique car with lead. Super interesting presentation.
@patriot1182
Жыл бұрын
A true craftsman period! Great job!
@aolinger680
Жыл бұрын
I have very vivid memories of my Dad repairing a leaking gas tank in our PA shop in the mid 1960's. I watched my Dad brazing a hole in a gas tank under a car with half a tank of fuel in it. Yes the gas was boiling on the inside but the volume of gasoline and absence of oxygen prevented a disaster. Yes it scared the schiff out of me watching him do it. Months later when I got off the school bus, there in the shop sat a gas tank that looked like a giant oversized steel pillow/balloon. This time Dad had removed the tank, drained and flushed it and then pumped it full of automotive exhaust carbon dioxide with the expectation it would displace all oxygen from inside the tank and prevent ignition of residual gas fumes. WRONG, them fumes will get you every time. Removing the tank and using an old school soldering iron seems way, way more prudent/safer. Great video Isaac, thanks.
@alkennedy1124
Жыл бұрын
A squirt water bottle work good for tin soldering for me good job buddy,,,BigAl California thank you .
@garybaughman7099
Жыл бұрын
Great repair Isaac. It looked like the tricky part was keeping the solder on the outside of the bung and not running down into the inner threaded part of the bung. Those old soldering irons may be old but they are still very useful in certain situations. We tend to think old people, ways, and tools aren’t useful but you prove they are. Thank you for taking the time to share your work and experience with us!
@jackpontiac9409
Жыл бұрын
Great (and safe) repair. I have a couple of those copper soldering irons. I don't use them often but when I need it, there is nothing else like them.
@dennymarreesr6187
Жыл бұрын
Nice job Isaac!! I picked one of those old irons up many years ago at a flea market.All my friends didn’t have a clue what it was. Most of them have since borrowed it a few times! Lol. Thanks for the interesting videos!!
@chrislindquist2003
Жыл бұрын
Great video Isaac. Really enjoy watching you work. Thanks for bringing us along.
@bobpowers9862
Жыл бұрын
Way, way back in the very early 70s when I was in Industrial Arts class, we had to solder several sheet metal projects at the corners, etc. We used exactly the same iron, but ours came with little firebrick natural gas ovens. You'd open the gas valve, and toss a match in through the observation hole. These were rectangular brick boxes, with a square hole in you'd set your iron into (resting on a crossbar, so all 4 sides were heated by the gas burners). Your project took me back. I aced those projects, as I had learned soldering (electric irons) back in the 4th grade and forward. Nice video.
@brucehobbs1734
Жыл бұрын
Love these videos, still love your other welding, cutting, and metal magic you do.
@aserta
Жыл бұрын
30:41 they're also very good for removing lead from old cars, fixing tins roofs without starting a fire. I've also taken a large one like you have, and milled a round hole into the side of it and i've used it for copper installations. For the last one in particular, it's the best thing since sliced bread. No more fussing about with open flames, it's much cleaner when you can work in your own time, my copper work has turned out much better looking ever since i got that "iron".
@alexaltrichter1597
Жыл бұрын
I worked at a body shop many years ago and they were used to lead panels together before wire feed welders came along and before plastic bondo also. One of the old timers had a whole collection of these irons which I believe they were copper.
@mikepaul3959
Жыл бұрын
When I was a kid I "got" to sand cars in the body shop of my Dad's dealership. I remember trying to lead in panels like the pros but never got too good at it.
@roberthawks7711
Жыл бұрын
As always. Great work you are passing on great craftsmanship... 💪🏼🙏🏼
@htownblue11
Жыл бұрын
Very cool throwback technique video Isaac. Great job.
@shack_67
Жыл бұрын
Awsome job, i like learning old school stuff
@christhompson475
Жыл бұрын
40 years ago I worked with a gutter guy. That's all we used to solder the joints together. Brings back good memories. Great job. Old school !!
@vino6955
Жыл бұрын
That leather trick is fantastic! Nice work!
@glenngosline1710
Жыл бұрын
Another great job by a true craftsmem
@kennethtencza9209
Жыл бұрын
Awesome video, very educational. Great work Isaac 👏.
@fjr2go
Жыл бұрын
learned something new today! Awesome job. Thanks for showing.
@mikeroup2721
Жыл бұрын
It is always a joy to watch you work (no matter what you are working on)
@darrenblattner2508
Жыл бұрын
I like the leather gasket trick, should work very well. I haven't used a soldering iron since high school. Keep smilin
@larrydickman8749
Жыл бұрын
Awesome, I learned something new every time I watch you. Keep up the great work
@TXH1138
Жыл бұрын
I remember using those big soldering irons in 7th grade metals class about 60+ years ago. We had a gas furnace we'd stick them in to get hot.
@darinwilson8663
Жыл бұрын
Nice repair! I wish I could be as patient as you are when doing those aggravating repairs. You set such a good example for your son and the rest of us out here with your calm approach to difficult things in all your videos. Good man you are 👍
@bentaylor8342
Жыл бұрын
Another work of excellence out the door!
@francodeiuliis1562
Жыл бұрын
Impressive thoughts went into this project Thank you for sharing Cheers from Nova Scotia
@elmeromero1794
7 ай бұрын
I’ve tigged many tanks for old school cars. Drain them, let them air dry for about a week, purge them with nitrogen and tig either the cracks, holes etc. Works great for me.
@thebanjoman1963
Жыл бұрын
I would have tried to 'peen' the hole smaller so the bung would hold better before soldering. I had one of those soldering irons I got from my Dad. It got lost in the move 15 years ago. Thanks for sharing. Always good information.
@johnearhart8811
Жыл бұрын
Absolutely genius. Love watching you come up with ideas. God Bless you and your family.
@willtricks9432
Жыл бұрын
I have at the same thing with my Truck fuel tank which had rotted out in two spots, Had to weld in some patches top and bottom, no explosion as I had run the truck on Propane for years so the tank was dry, Found some fuel proof filler and painted a few coats and now all good. Needed new gaskets so used some shop floor rubber mat which is fuel safe. Took a couple of weeks after work but a new tank £900.00 / $1085.76 so worth the effort. 1976 Landrover 101 ex military. My daily drive.
@dlyrag755
Жыл бұрын
Nice job, old school rules.
@barrysimmons5489
Жыл бұрын
Hey Isaac, Over the years I have repeatedly purged gas tanks with nitrogen or even engine exhaust and welded on different gas tanks. Even with some gasoline residue still in the tank. You must be sure the vapors are overcome by the purge which must continue throughout the weld process. Done it with both Oxy-acet and TIG. Just like lighting a burner, after a time of purging, light a match at a small opening, the purge should blow it out. If it lights, it'd be like the flame on a burner and will extinguish when the purge overcomes the oxygen atmosphere. I've set'em up using a car engine or even lawnmower engine. Carbondioxide in that process is the overcoming element. Anyway, that's my story n I'm sticking to it. The last one I did, after replacing the original tank leaking at the neck, couple years it started all over again. They're all swedge fitted. I torch welded the neck to the tank without removingcit from the car. Used nitrogen purge. The gauge showed 1/4 tank of gas. It drove 7 - 8 years n I sold th he car, it's still goin.
@billmiller7138
Жыл бұрын
I was taught or maybe just learned to clean them out good with soap and water, and then plug them so I could fill them with water to just below the repair. Gas welded quite a few back in the day without a problem. But I do think the soldering was a good idea for that repair.
@thepoopsoup
Жыл бұрын
Bleach will eat gas fumes
@jerrybigrig9475
Жыл бұрын
@@thepoopsoup bleach and galvanizing..??😳🤔🙃
@ionstorm66
Жыл бұрын
Always just stuffed a flex hose from a car/truck exhaust into the tank for an hour. The heat will boil off any gas and blow it out of the tank.
@Dave-ty2qp
Жыл бұрын
Glad to see you're still here. You are theoretically right but it only takes one "OOPS!" to wipe out all of your "at a boy's". LOL
@JonDingle
Жыл бұрын
I have a small soldering iron somewhere. Interesting stuff young man. That car is solid underneath, must be the dry weather you have.
@d6c10k4
Жыл бұрын
Looks like it worked great! Just don't heat the soldering iron too hot. Gasoline has an ignition point of 536 deg F. A really hot iron could set it off. My brother and I learned a lesson as teenagers. We had a pickup tank that had a nail hole in the top. This was a long narrow tank with the filler neck on the end. We filled it with water within an inch or two of the top and touched the hole with a propane torch to solder it up. The thing took off like a rocket across the bench. It didn't blow up and hurt us, but I won't ever forget it.
@anonymouscoward7559
Жыл бұрын
I remember using soldering irons in shop class when i was in high school, but never seen one as big as what you used. Nice video Cheers from Alberta.
@michaelweatherhead9470
Жыл бұрын
Thanks for the video Issac a real cobbler job on that gas tank.. Take care of yourself and family ❤️👍👍✅.
@georgetarabini6552
Жыл бұрын
Nice change of pace, thanks
@RickAShriver
Жыл бұрын
Nicely done!!!
@protonhead1
Жыл бұрын
Great job, that really turned out good. I have 5 or 6 of those irons i use for radiators and fuel tanks too.
@marklowe330
Жыл бұрын
When making paper gaskest, they say to use oil on it. I wonder if that would be better than grease or about the same? When I was a child in the 70s, a gentleman who lived near us was killed while welding a gas tank. Enjoyed watching and learning. Thanks for your time and knowledge.
@scowell
Жыл бұрын
Nice job! One way to work on those is to fill them with water... still not guaranteed safe. Also, when soldering, it's often best to have separate flux and solder... clean and flux the fitting, tin the tank, then when you pull the fitting through the solder will flow onto the fitting from the tank. Flux-core solder is often messier than it needs to be. Nice five-seven by the way!
@rhadden8976
Жыл бұрын
I had completely forgotten about those irons. I was taught how to use them in shop class. Nice job.👍 BTW that has always been my dream car, bar none.
@geoffbugden8978
Жыл бұрын
watching from Australia. love your work.
@namarhodge568
Жыл бұрын
Great video. Good repair. Helpful hint, after removing gas from a tank, hook up an exhaust pipe from a small engine or a vehicle, let it run a few minutes to purge the fumes. While still purging, you can braze or weld with an open flame. It works good, no explosion.
@cosmopezzolla996
Жыл бұрын
Great video as always. Thanks for enlightening most of us on the old school soldering irons and Leather for gaskets. Let us know how it works out!
@josephsteffen2378
Жыл бұрын
For the gasoline line and guage sensor: Curil-T2, Curil-K2, and Hylomar U Sealants are a good choice for many mechanical fluid sealing surfaces. They don't harden, stay soft. The benefits are: gasoline resistant (non-ethanol), high temperature environments, easily disassembled later, and ultra-easy clean up! In the 1990s, Chrysler/Dodge and Ford automotive assemblies/products began to use the Curil(German quality...really good stuff...originally used by Porsche!) brand sealants(rebranded under their own name). Either used alone or with OEM gasket(depending upon the gap/clearance). As with any type of sealant: it's chemical "voodoo". So some research (do diligence) is in order. One trick is to conduct yir own test: let whatever it is cure, then drop some in various chemicals with sealed lids and see what happens after a week or two. Also, apply to different metals (substrates) to ascertain any reactivity... Finally, if it's part of a electrical/electronic circuit (gas guage sending unit, or some other sensor), add a "bonding" strap/jumper. Yappity-yap...it ain't the space shuttle...
@donstickney7938
Жыл бұрын
I love the leather gasket, I gave a set of soldering coppers to my son with everything else in my shop. Nice job. I enjoy your videos greatly.
@gwharton68
Жыл бұрын
The old way is the best way. Great video.
@jshelledy1
Жыл бұрын
Nice job. I knew those were soldering irons but had never seen them used. Thank you for the post.
@acmemachining
Жыл бұрын
Good Job Isaac. I haven't had to soldier a gas tank in years, Replacements have gotten cheap enough is probably why. We use to wipe excess soldier away with a rag, it works great. Still using a rag when soldiering copper pipes. Thanks for a great video. Nice old car also!!!
@martinhow121
Жыл бұрын
Wire wool with plumbers flux on is even better for the clean up.
@acmemachining
Жыл бұрын
@@martinhow121 I will try that. Thanks
@alfadoofus
Жыл бұрын
Using those irons for sheetmetal work we had a box that burned charcoal to heat the irons. Just don't put too many irons in the fire. Great repair I liked the leather gasket .
@tomivy1052
Жыл бұрын
got one exactly like yours, works awsome,have a small one also very important to have !!!
@sterlingdavidgrasssr
Жыл бұрын
Thats a lost art ,i still have my Grandfathers old irons, Have saved my butt a few times ? Thanks , See Ya
@campy9712
Жыл бұрын
Another great video, thanks. I have three of those copper soldering irons, they were my grandfather’s. I have used them in the past.
@markreetz1001
Жыл бұрын
Very interesting! You made it look easy.
@kevinlott9626
Жыл бұрын
I have an ancient soldering iron just like yours that I got from my granpa, and was always wanting to use it. Now I will.. thanks to you! 👍👍
@ICWeld
Жыл бұрын
Have fun!
@gusm5128
Жыл бұрын
Isaac , my Grandfather had a very similar soldering iron as you have there . Amazing what he could accomplish with it .
@58unclesam
Жыл бұрын
Nothing wrong with dating yourself, that’s where you got your experience and great work ethic!
@Asomesauc
Жыл бұрын
Thank you for the great content.
@harrysavage2933
Жыл бұрын
Yes I remember the soldering iron my dad had four of them he showed me how to use it Dad always made a fire to put the iron's in the fire pit and said watch son how this works his Dad thought him you bring back to me memories I'll be watching. I'll be praying for you and your family and friends God bless all
@jamestsmith4500
Жыл бұрын
That peacock if that is what it is called is a recipe for problems. If you should have to drive some where tall grass or a gravel driveway with ruts in the road the gas tank may bottom out. Maybe, maybe not. I would have stuck to the metal plug and be done. Like you said a person wanting to steal gas would have a holiday. Great job of how you did it !!!!!!
@mrln247
Жыл бұрын
Messing with old car's I've made quite a few gaskets out of Cornflake boxes, Hylomar blue is an excellent sealant for this sort of thing much more user friendly than any RTV. High quality piece of leather you had. Tried atleast 4 leather seals on an old Land Rover diff but could never get them to seal right although was an ugly sealing surface on the flange.
@bigunone
Жыл бұрын
The tank is always full when you have to pull it, ALWAYS! Emory cloth or fine sandpaper around the file would have cleaned it up nicely
Пікірлер: 471