New Channel: www.youtube.com/@Just_Print Buy it here: geni.us/fyUh4U Recommended: geni.us/JustVlads
@GODCHAMPION27
3 жыл бұрын
I love it and this video help me allot
@TheDevnul
4 жыл бұрын
What I like about your builds is that they are fair and unbiased. You give the best chance with proper criticism when warranted.
@Lunar-zt2xn
3 жыл бұрын
That’s what everyone should be like
@iancrowe8384
4 жыл бұрын
Vlad. Just like to say thanks for an excellent video. Thanks to this and CHEP's video on the evolution of the A10 (looks like it's now on version 4) I went out and bought an A10 last week. Your video made putting it together very easy. A few things to note:- 1) They've upgraded the bearings on the V rollers. 2) They've redesigned the filament sensor (a couple of times). The latest seems to feed properly. 3) The cable to the LCD display has been upgraded to an IDC with full 0.1" pitch headers. Now the bad news:- They are still over-tightening the V rollers. My Y axis was stiff and bumpy and required backing off a lot. It no longer ships with a Superplate just a stick on Mylar sheet and a scraper :-( Mine shipped with a locked up Part Cooler Fan!!! Looks like when they stuck the duct in to the fan exhaust some excess superglue got into the body and firmly stuck the rotor to the body. A quick exchange of e-mails with Geeetech tech support and they're sending me a replacement hotend assembly. Even with the above I've been impressed with the quality of the prints I'm getting even without parts cooling. Many thanks for your efforts Ian
@allenmoore9848
4 жыл бұрын
I have just ordered an A10, the advertising said latest version so I will be able to reference against the one you have. This video has been very useful thanks for the time and effort, it has helped me enormously. All the best Allen
@MalquiLans
3 жыл бұрын
One of the best A10 assemblies I've seen. I've just bought the A10M with version 4 LCD board. This demo will help a lot once I actually assemble the thing....
@therinwhitten
2 жыл бұрын
This is a top notch video! Wow. Great job man!
@MrRevolutionStarter
3 жыл бұрын
I just put my a10m together, I should have watched this first. Great video
@ioqid8440
4 жыл бұрын
The A10 is actually a ender 3 clone so if you were wondering why it looks like and ender 3 That's why
@randomtherapy
2 жыл бұрын
Cracking video. Really liked your style. I've just bought this model today so looking forward to more tips and help from you. Subscribed and hit that bell 🔔
@canadagoose15
3 жыл бұрын
I love this video. Very well put together.
@paulonobrega3557
3 жыл бұрын
This is a amazing tutorial... Thanks for that 💪🔥
@LScott97
3 жыл бұрын
Brilliant video! Well done! 👍👍👍🤠
@GODCHAMPION27
3 жыл бұрын
Best video
@chalky3320
4 жыл бұрын
you have the mk2 version there vlad its now on mk4 and its a fantastic printer.ive had mine for a while now and have custom firmware on it so you can do mesh bed levelling.and imo its far better than a standard ender3 but opions are like buttholes,everybodys got one lol
@ronaldrico3208
4 жыл бұрын
Very detailed nice.
@Be3Al2
3 жыл бұрын
can you please make a review on the Geeetech A10T and or the Geeetech A20T 3-in-1-out Mix Color 3d printer please.
@hectorflores6666
4 жыл бұрын
Which printer would you recommend to a tinker/beginner? I thought about the CR 10 Pro or the Cr X (I like the idea of dual-color)
@ThePurplePupUwU
4 жыл бұрын
Ender 3
@boslough
3 жыл бұрын
when and where do you put in the SD card???
@muhammadasadkhan7889
3 жыл бұрын
DO IT SUPPORT POWER RESUME PRINTING?
@Ahmadalma
4 жыл бұрын
bro can you buy the thrustmaster TX leather edtion and do an unboxing
@shtimm3230
3 жыл бұрын
Какой лучше, ender 3 pro или geeetech A10 ?
@dillon6968
3 жыл бұрын
PLEASE!!! When you are back feeding power from the stepper motors by moving them back and forth… UNPLUG THEM or only move slowly so you don’t fry your motherboards.
@callumsmith5263
4 жыл бұрын
What 3d printing software do you use for the geetech a10
@spiderfandom7592
3 жыл бұрын
It uses Merlin same as the ender 3
@callumsmith5263
3 жыл бұрын
@@spiderfandom7592 you mean marlin?
@spiderfandom7592
3 жыл бұрын
@@callumsmith5263 yes
@mohammadfaris9033
4 жыл бұрын
can i use another type of filament in this printer?
@dillon6968
3 жыл бұрын
Yes. It is the same as the ender 3 so PETG and maybe TPU (very stringy though), just make sure your slicer settings (temp, speed, etc.) are adjusted accordingly. Mixing them is probably a bad idea though as there is only one hot end. EDIT: ABS would probably work as well although PLA is honestly better in my opinion
@mattsaganowski2689
4 жыл бұрын
In the included gcode the part fan wasnt on
@RADINIUM
4 жыл бұрын
Help!!! When I opened the box the glass plate was not attached to the steel plate. Please help
@elliottslab
4 жыл бұрын
Just buy the ender 3 it copies
@shahnawazhusain2008
4 жыл бұрын
Just like that.... 😂😂😂
@ioqid8440
4 жыл бұрын
Am I early?
@johne4188
4 жыл бұрын
M
@NSAwatchesME
4 жыл бұрын
I don't want to see how to setup all these shit printers I want to see which printer is good and get it
@giovannicortellessa1608
3 жыл бұрын
soooo boring man please increase your speech abilities
Пікірлер: 40