love your videos dude. every two years or so I'm back here watching these whitestone tutorials because I'm so anxious about it. it's truly not terribly hard, but can't help stressing it and these helpe out a lot
@HOBOsnake
2 жыл бұрын
not sure why I never threw you a sub before, but you earned it.
@wandafull12
2 жыл бұрын
This video is fabulous! I have been so afraid of installing a Whitestone Dome. You made it easy. I'll never buy a different brand. Thanks. 👏🙌
@michaelmarquez6133
Жыл бұрын
Your the best, I have installed a lot of these already but every time I need to do it again I come back to your vids. I have to say tho, I have had Samsung phones for years and I never knew about the different colors when charging! Cool!
@WreckedBrewery
2 жыл бұрын
Great tutorial. I put the WSD screen protector on my S22 Ultra when I got it a couple weeks back. Your installation step by step is super helpful and very accurate to how I did mine. Flawless install and I love it. I especially like how it feels to the touch (both finger and s pen). It's very smooth and a joy to use. Cheers!
@landonandkathymiller7401
2 жыл бұрын
Could not have installed this screen protector without this video! And I did perfectly the first time! Mfr video lacked in all the details. Thank you for sharing this process. All the reviews said this was the best screen protector, but it was intimidating. After watching the mfr's video over and over for an hour, I looked elsewhere. So glad I landed here! Thanks for your expertise!
@RAASPOKE
2 жыл бұрын
Excellent instructional video: while the installation of the Whitestone Dome Glass Screen Protector is detailed and consists of numerous steps, watching you proceed through the process was invaluable to this 1st time user. For instance, during your video, you certainly provided a good sense of timing. The installer does not have to worry about rushing to complete each step. The adhesive does not harden until cured by the UV light. Patiently taking your time is not going to turn one into a pumpkin. Your tip on how to guide back a wandering isolated adhesive drop might cause panic to some but made me laugh as to how you coaxed it back to join the herd. FYI - I watched/referred to two installation videos. The second one was prepared directly by Whitestone and may also be viewed via KZitem. One notable difference between the two tutorials: the Whitestone video explains that the 2nd curing process includes, “Cure 60 seconds each for bottom and top of the device and repeat 1 more time. (2nd curing total time: bottom 120 seconds / top 120 seconds).” I believe that your video shows a 2nd curing time of only one 60 second period for each of the bottom and top locations, and not two 60 second periods. I followed the Whitestone video (i.e., a total of 120 seconds at the bottom and 120 seconds at the top) and the installation was successful. Maybe, the extra curing is not essential, yet it did not cause an installation issue. Many thanks for your professional and thoughtful guidance.
@XtianApi
2 жыл бұрын
Best tip for low dust, besides positive pressure hood, is use a bathroom after someone has showered. The think humidity in the room really weights down the dust.
@stevehan3809
Жыл бұрын
Very much impressed with your product review. Thanks a lot indeed
@ebpman
Жыл бұрын
We have them on all our phones. I have another go to product that we will be reviewing this week
@MechInfantry2AD
2 жыл бұрын
Great video as always. I started to use the via your previous recommendation for my s21 ultra and haven't looked back. Just received my wife's s22ultra and just placed it on hers with no issue. Many thanks.
@scotts6596
Жыл бұрын
Still the Number 1 instructional video for installation of the Whitestone dome Glass on the Samsung galaxy s22 ultra phone. Great Job as usual. By the way, Another Y tuber ( jabber tech ) does his finger print impression on the biometric spot to theoretically help with response issue. Others press longer before the 2nd light process. What is your opinion on that? Does it weaken or compromise the glue or glass bond? Thank you!
@FrostThorn
Жыл бұрын
I find Whitestone to fragile chips super easy
@theredbar-cross8515
2 жыл бұрын
I've seen a lot of these install videos and I've yet to see someone suggest the obvious: wear some nitrile or powder-free latex gloves. No fingerprints to worry about during the installation process.
@Mike_The_Hog_A_Nator
2 жыл бұрын
Great tutorial & info. I've always used Self Healing TPU Screen Protectors because my home is so dusty!! By the time I put the glue, grab the protector, there's dust on my phone. Thinking of getting this protector & definitely getting that 65w charger. Looks like a Great product
@jeffmerheb3182
2 жыл бұрын
Wouldn't you get a dust or 2 during the operation though?
@kwmiked
2 жыл бұрын
Will it fit in a Otterbox Defender case with that screen protector on it??
@ejedouble2000
Жыл бұрын
Yes
@ashimshrestha9578
9 ай бұрын
which one do you suggest whitestone or spigen screen protector for s22 ultra? please comment
@jeromegold3216
2 жыл бұрын
Great content. As for that screen protector. Whitestone dome. It works great, But when using supcase unicorn beetle pro or poetic spartan or revaluation cases Whitestone dome lifts to easy from the phone. To expensive for that to happen. And yes I cured the screen protector. I do it for at least 3 minutes all the way around. So I went to Amfilm elastic skin screen protector. Works great, no lifting no matter how many times I switch cases.
@Pabloman333
Жыл бұрын
Very helpful! Thank you! I'm having trouble with fingerprint sensor. I turned on screen sensitivity and reregistered my fingerprints, but still having trouble. Any tips?
@techfan8457
2 жыл бұрын
Thanks for the detailed video. I tried the fingerprint sensor and worked like a charm. However, when the adhesive started drying a few hours later, the fingerprint was not working anymore. Tried to go in and redo the fingerprints but it would not even allow me to get through the setup process It kept only detecting a very small part of the fingerprint. What did I do wrong? I wound up tearing it off. Really love the screen protector. Wished it would work and still want it to work.
@Pandemonium088
2 жыл бұрын
This is something that these videos do not cover or talk about unfortunately.
@Moe395
2 жыл бұрын
I have the same problem with the SENSOR that worked but now doesn't work at all ... Samsung needs a side sensor like what's on the Fold models.
@bennytdi
2 жыл бұрын
Great tutorials as always.
@motestaplofom8649
2 жыл бұрын
The uv light comes inside the box?
@stevehan3809
2 жыл бұрын
Thanks for your introduction
@apexpredator_jku
2 жыл бұрын
There's actually 3 charging modes. Fast, Super Fast and then Super Fast 2.0 which you get with Samsung 45w brick. It's rare, if ever that you'll find a 3rd party brick regardless of the wattage rating that'll get you that 2.0 charging. That 65w Whitestone brick isn't giving you any more than 25w if that
@WhitestoneDome
2 жыл бұрын
Thanks for the review!
@Veryghoster
Жыл бұрын
Did it work with UAG Plyo case ?
@peterpikefisher
2 жыл бұрын
great video very helpfull btw where did you download the not apple wall paper its so cool
@fvahamonde
2 жыл бұрын
Can you show examples of how the S-pen works with the screen protector?
@luceml8455
2 жыл бұрын
Great tutorial. I have never used a glass one before and im thinking of going with the whitedome i lke the stickerss that protects looked at the amfil aswell and it dosent have that. But with whitedome you hear that fingerprint wont work all the time and it wont be case friendly so what you all think?
@JuanGonzalez-jw3hx
2 жыл бұрын
I messed up the first glass install :( at least I got it on sale so it wasn’t too expensive but damn there’s so many bits and bobs and the instructions they include nowadays are not very….well….
@madinagbotoe7397
2 жыл бұрын
My worry is that the screen wont be as clear once I have the glass installed, is that the case here?
@BretMuckdogs
2 жыл бұрын
Thank you very much for this video! Question...With the Whitestone Dome screen protector that I installed on my S22 Ultra, Ive noticed that the glass has had issues with its oleophobic coating. There are some marks either from my cheek or pillow that have left residue on the screen that I can't clean off with a microfiber cloth. Any insight on this would be appreciated!
@douglasdever6134
2 жыл бұрын
Clean your face. First time I have ever heard of this problem.
@mstechboss
2 жыл бұрын
Where can I get the wallpaper on your lockscreen?
@hupacado
2 жыл бұрын
Great!
@bryanr.3241
2 жыл бұрын
You skipped over not showing the removing of the top Lego piece and also you never showed when to remove black sticker strips. Otherwise , good video but for first timers , I think it doesn’t matter how long the video is , but precision with doing Whitestone is imperative. Some people have made the mistake of putting the glass in upside down with curves pointing up. I’ve done this several times and followed your way with the S21 where the kit had a wind up sliding top piece which was cool as heck. But Whitestone changed it up this time. I’m just waiting for Samsung to ship my dam phone !!!! Hope this screen protector works with the Otterbox Defender Pro.
@scottp4402
Жыл бұрын
Great as usual, However: The speaker protector you placed on top was not placed correctly, there was a wrinkle remaining that may or may not affect the application. also, Does the snapping of the phone into the frame scratch or scrape the phone sides? That click sound indicates pressure on the sides of the phone. And since you have been installing the WSd glass since 2017, have you seen the quality of the glass decline ( cheaper/ easier to break ?) Is the Wsd compatible with the Otterbox defender? I dropped my Note 20 ultra on my tile floor using Poetic brand case and it shattered, ( without having a protector on the glass. ) So Poetic, is garbage in my opinion. I have been using the Uag Monarch on my s22 ultra until the new defender arrives. I dont know how the Monarch claims 20 ft drop protection, but I would install the wsd on it for sure, due to the smallish lip protection. Thanks again!
@ebpman
Жыл бұрын
Thanks. Not perfect for sure but still have the same screen protector on the phone and won't cha ge it until I get the S23 Ultra.
@scotts6596
Жыл бұрын
@@ebpman What are your thoughts on the AM glass ? Stick with Whitestone or AM film equal ? Flaws?
@sleepergirl04CRNA
2 жыл бұрын
1. You didn’t show at what point you removed the side stickers. They just magically disappeared. 2. I wish you’d shown and commented on the camera lens protectors.
@ebpman
2 жыл бұрын
I am iffy about the camera protectors. I use them but they are not essential with the right case. The stickers good point. Just peel in go. I will include in next video for sure
@sleepergirl04CRNA
2 жыл бұрын
@@ebpman I thought they were screen protectors for the camera lenses. I saw on another video what it looks like out of the package. I bought a case that protects the lenses in a similar way.
@caligirrl6856
2 жыл бұрын
Didn't see a link for charger & cant find on Amazon, what is price & where can it be purchased, thanks
@quickstaz
2 жыл бұрын
The link is in the description!
@caligirrl6856
2 жыл бұрын
Only link found is for cable and screen protector. Where exactly is charger link ? Thanks
@Crazywhitie
2 жыл бұрын
My god it’s a screen protector. This is like surgery. How did nothing get on screen when you were playing with the glue. How do you remove the screen protector?
@luceml8455
2 жыл бұрын
and im super afraid to mess it upp with the glue
@ebpman
2 жыл бұрын
I was too. But it works so well. Watch the vid. A few times organize your self triple check, dust is your enemy
@anthonyruiz8519
2 жыл бұрын
you made that way harder than it is to not touch the screen lol
@georgew2432
2 жыл бұрын
Don't listen to these fanboys, over priced and the finger print sensor works once out of 10 tries and if you try to put a supcase unicorn beetle pro on it, expect to get your glue back out. Biggest scam on youtube are this fools who ain't paying what we are paying for this crap because they get it free. Let them pay 50 or 60 bucks for this crap and see what they say ffs
@douglasdever6134
2 жыл бұрын
Terrible! Leave liquid tube in holder for about 100 seconds then remove with holder. Do not drop tube into circle of glue that could cause bubbles in glue. Level before starting. There are better instructions online than this guy.
Пікірлер: 55