Left Up!
The recording is very, very quiet :/
I'm going to change the oil and clean the oil filter.
We need:
12mm socket wrench
6mm socket wrench
Phillips screwdriver
Torque wrench
Clutch cover gasket
Centrifugal oil filter gasket
Synthetic engine oil, in my case, Motul 7100 4T
00:04 Unscrewing the oil drain plug (12mm wrench)
01:00 Disconnecting the clutch cable
01:40 Unscrewing and removing the clutch cover (6mm wrench)
04:15 Removing the mesh oil filter
04:45 Disassembling the centrifugal oil filter
06:15 Tightening the oil drain plug (12mm wrench, 30 N-m)
06:35 Lubricating and installing a new gasket for the centrifugal oil filter (Phillips screwdriver, 4 N-m)
07:55 Installing the cleaned mesh oil filter
08:10 Installing the clutch cover (6mm wrench, 12 N-m), with the new gasket already placed on the cover
10:05 Pouring in the oil (0.9 liters for just the oil change without removing the clutch cover, and 1.1 liters if the clutch cover is removed)
12:02 END :)
The most time-consuming part is cleaning the cover and engine block elements after removing the old gasket.
The mesh filter is reusable, so handle it with care during cleaning.
If you liked it, leave a like, and it will encourage me to make more service videos.
Негізгі бет Автокөліктер мен көлік құралдары Give it to the workshop - Oil Change in CBF 125
Пікірлер: 8