I'm cleaning the filter and changing the oil
We need:
- Socket wrench 12mm
- 6mm socket wrench
- Cross screwdriver
- Torque wrench
- Clutch cover gasket
- Gasket of the centrifugal oil filter
- Synthetic motor oil, in my case it is Motul 7100 4T
00:02 Unscrewing the oil drain plug (12mm spanner)
00:27 Disengaging the clutch cable
00:38 Unscrewing and removing the clutch cover (6mm spanner)
01:19 Removal of the mesh oil filter
01:44 Unscrewing the centrifugal oil filter
02:37 Tightening the oil drain plug (12mm spanner 30Nm)
02:57 Lubrication and installation of a new seal for the centrifugal oil filter (4 N-m Phillips screwdriver)
03:39 Clutch cover installation (6mm wrench 12 N-m), new gasket previously installed on the cover
04:38 Filling the oil (0.9 l when changing without removing the clutch cover and 1.1 l when the clutch cover is removed)
4:55 THE END :)
The most time-consuming cleaning of the cover elements and the engine block after the old gasket.
The mesh filter is reusable, so be careful with this element when cleaning.
It is best to buy a set of gaskets, because you will definitely use them for other service work.
Left up!
Негізгі бет Oil change Honda CBF 125
Пікірлер: 14