The 10mm 3.8" XDM Elite has taken the place of my G20 on my hip. Better sights, eats everything, better ergonomics and no barrel changes needed for whatever ammo I choose to run through it. It's my hiking, camping, atving woods gun here in the Colorado mountains. Underwood 200 grain hardcast is what I feed it up there. I did put a Talon Pro grip on it because the XDM grip texture is not ideal. It's also my winter carry piece when the heavy clothes and jackets come out. Underwood again has an impressive round for that as well. 135 grain, 1600 fps, 768 ft/lbs muzzle energy. That will get the job done!
@bustabass9025
10 ай бұрын
Got the same pistol. It thrives on my handloads with Blue Dot and any bullets I top 'em off with.
@sparky_-mf2cs
8 ай бұрын
@D-A-1776 no way you get the same ballistics 😂
@GunsNGames248
6 ай бұрын
G20 way better
@boblaws9851
6 ай бұрын
@@GunsNGames248LOL Says the Glock fanboi... LOL I own both (and other Glocks as well) but I carry the XDM. The Springfield is more reliable with hot loads and no barrel change needed when I carry/shoot my 200 grain hardcast woods ammo.
@aybycy7275
5 ай бұрын
@@D-A-1776 Grip safety.....I don't even feel it. You must have really soft hands.
@rachelwaatti4819
10 ай бұрын
I’ve never had a problem with either XDM or the G29. I have both and am totally satisfied with them.
@diverbelow27
Жыл бұрын
XDM for me
@grahamohea2424
Жыл бұрын
I own the G29 and it always surprises me how well it handles recoil, even with my 200gr hot loaded handloads
@thegundungeon
Жыл бұрын
Hard to beat for sure
@rachelwaatti4819
9 ай бұрын
I have both. I prefer the XDMe trigger
@ThisIsWhatIDo77
8 ай бұрын
I think the XDM is reliable. I think you didn't have a FTF or a FTE issue. You had a locked back, that is only suppost to happen on the last shot because the mag design pushes up the slide lock . I think it most likely was shooters trigger hand hitting right side slide lock.. If I owned that XDM, and never intended to sale, I would dremel off that right side slide lock because I would conceal carry the XDM. I have a GK 29 gen 4, but like the feel of the smaller handle of the XDM 3.8 is better for me because I have medium small hands. The 29 feels good, but handle is a little too big for me. I agree with you about the polygonal barrell issue on the Glock, not being designed for really hot loads. Good video.
@veevans01ify
Жыл бұрын
I’ve had a Glock 29 for three years. Loved it. Had to sell it to get some money. This week I Got a great deal on a XTM elite with the dragonfly optic. 3.8 barrel and a tlr1s. Shot it for the first time today and I must say it’s a better shooter than my Glock 29 was. I ran Underwood 155 gr, double tap, Sig elite, and Corbon through it today and it ran very well and the recoil was better than on my Glock 29. The pistol is very reliable and extremely accurate. I do look forward to getting another Glock 29 in Gen five comes out. The GEN five Glock 20 is out now
@DannyBashy
Жыл бұрын
i want the 29 in gen 5 very bad but dont know if it will ever come out
@domaneckfranco6930
Жыл бұрын
It appears that the slide locking open might be related to that ambi slide lock. It looks your index knuckle was activating the slide lock. It’s been a reported issue on the compacts mainly. I have the compact in .45 and haven’t experienced it but I’ve seen other reviews report the issue. Should have been reversible on the compact.
@StephenJetman
4 ай бұрын
10 mm underwood in 135 has velocity in magnum and energy. Plus it's lighter .
@enmerdeur
Жыл бұрын
Keep'em both. Damn straight!
@thegundungeon
Жыл бұрын
Absolutely lol
@roncoon3464
Жыл бұрын
I chose the G20 & 29 not only for the stopping power, but for the versatility to change into alternate caliber ammunitions when your preferred is not available by just simply swapping the barrel; 10mm, .40 cal, .357SIG, & 9x25 Dillon.
@roncoon3464
Жыл бұрын
You can turn them both into .45's (Glock lowers for the 10mm and .45 are the same), but then you'd have to change the barrel and the magazines.
@ThatNoFbody-ch9ky
10 ай бұрын
@@roncoon3464you don’t even have to change the barrel in the xdm from 10mm to 40 it shoots both w the same barrel and almost any gun in 40 s&w can be converted to 357 sig or 9mm
@jonaaas925
10 ай бұрын
The “issue” with the XDM is the slide stop. I have one and first I thought that was a malfunction, but is not. The slide stop is very sensitive and if you touch it with your thumb while shooting, the slide is going to stop, and keep it open. It’s just practice, don’t touch the slide lock while shooting.
@sparky_-mf2cs
8 ай бұрын
Regardeless its still a malfunction...when your under the gun who wants to have to think about bieng overly cautious not to "touch" the slide stop...
@rangetime6779
Жыл бұрын
Interesting about the Glock polygonal rifling? I knew about the cast bullet issue but I thought plated bullets wouldn't matter. Obviously with those hot loads it does. The rounded rifling must be smearing and not engaging properly. My 40 S&W Glock shoots plated bullets just fine with a stock barrel but they're loaded at a modest velocity. Thanks for sharing a good video
@mikegrendel9126
11 ай бұрын
I have the same xdm and have not experienced the hold open issue
@thegundungeon
11 ай бұрын
It was a break in issue, it resolved itself
@juandeleon5738
6 ай бұрын
Thank You! Very helpfull. Greetings from Guatemala
@roosterfish3248
Жыл бұрын
I got a xdm elite 10mm 4.5 inch a few months ago. It's in fde, optics ready, and has the new super trigger. I forgot what they call that trigger. I guess it's a nice pistol. Seems reliable, and accurate if you keep concentrating and pulling on that awful trigger. The damn thing reminds me of turning the crank on a jack in the box. Sooner or later something is gonna happen. You take the slack up, hit the wall, pull some more, and it will start moving again, keep pulling and it will go through a fee more sticky spots, but just keep pulling and bam! The damn thing is accurate though. I ordered a fusion commander in 10mm yesterday. Someone is gonna get a good deal on my springfield!
@thegundungeon
Жыл бұрын
Maybe you got a lemon as far as the trigger is concerned, mine is pretty good.
@roosterfish3248
Жыл бұрын
@@thegundungeon I think I did. I got to handle another one, and the trigger is way better than mine.
@thegundungeon
Жыл бұрын
@@roosterfish3248 I have 3 xdm’s and the triggers are all pretty good.
@alejandrovargas7592
10 ай бұрын
Doesn't seem remotely like the trigger on mine. Personally think mine is super good. You might want to have a gunsmith check it out.
@roosterfish3248
4 ай бұрын
Update, the more I shot the springfield the better I got with it. I'm used to the trigger now. I think the issue may have been that it just feels different bc I've shot glocks so much. I got the 10mm commander from fusion finally, and it shot 2 feet high at 25 yards, and the mag jumped out every couple of shots. Its been back to them twice now, and I've decided I'm gonna have to do something with the sights myself. It is nowhere near as accurate as the springfield. I'm keeping the springfield. I actually killed a 225 ppund boar with it at 40 yards. The fusion will probably just get thrown in the safe as I couldn't sell something that awful to anyone.
@jamesalbin6194
8 ай бұрын
I personally Iike the XDM I own the 3.8 and the 4.5 and I love them both and have never had a problem with either one of them and I can't comment on the GLOCK because I have never owned one and don't really like the way they feel or look.
@thegundungeon
8 ай бұрын
I have the 4.5 as well, they are great guns. I’m glad we have options for most everyone these days in the beautiful 10mm lol
@aybycy7275
5 ай бұрын
The 4.5 and the 3.8 slides are interchangeable. Both run flawlessly
@mountain_man89
Жыл бұрын
Off topic but i have a Glock 20, i heard you could shoot coated hardcast like underwood out of a stock barrel? I have 200 and 220 hardcast with a red coating for grizzly. I live in Montana 😊 The 29 he has ran fine, he said he stuck the stock barrel back in.
@colonelblars9126
2 ай бұрын
get the XDM, if a bear is on you you're gonna be pointing and blasting with no time to aim down sights. having a gun that strikes true to where you point it on the draw will save your life. and not just with bears. stay safe.
@Disastrous.Affect
4 ай бұрын
I already have the XDmE, but I am actually researching the G29. I picked up the CMMG MK10 Banshee in 10mm recently and thought it was time I forced myself to finally get over the grrip angle and learn to shoot a Glock so that I have magazine compatibility across both platforms. Great comparison.👍
@thegundungeon
4 ай бұрын
The grip angle issue isn’t as pronounced on the shorter grip guns like the g29.
@Disastrous.Affect
4 ай бұрын
@@thegundungeon Thanks
@RobertLowe-ws1bq
6 ай бұрын
I own both. Prefer the Glock for 2 reasons. I don't like the feel of the XDm grip and I hate the grip safety. They are (for me) equally accurate and recoil is about the same. My Glocks mags do have extended bases which makes it much easier to shoot.
@D-A-1776
Жыл бұрын
Both are great, nothing will replace my g20 but this definitely replaced my 29 mainly because itll shoot hard cast without changing the barrel.
@boneyard8705
8 ай бұрын
Underwood and buffalo bores hard cast is hard enough to shoot out of a stock Glock barrel. Both companies go over this discussion.
@theroller5673
Жыл бұрын
Well put together video in keeping all things equal. I'd never have a 10mm as a carry gun (weight, recoil, ect), the juice just isn't worth the squeeze for me. Always love your fair and balanced videos and whether videos or the shorts you have some pretty rockin' music.
@thegundungeon
Жыл бұрын
Thank you! I typically carry 10 in the winter when it’s easier to get away with a larger gun and I tend to be in the woods more. Thanks for watching!
@joeyman0209
Жыл бұрын
I just purchased the XDM elite 3.8 and it is far superior to the glock G20 that I have owned for several years. As for the Springfield FTFs I hate to say it you must have been you activating the slide lock as I have seen this happen first hand in person. I have not had a FTF in 300 rounds. GET THE SPRINGFIELD... Glock needs to get with the program and make some advancements and improvements. Glock would be smart to take Lee Iacoca's advice "You either leed, follow or get out of the way!" Glock better start trying to leed because they are getting pasted up by many other manufacturers. I would take a Canik any day over a glock.... Sorry all of you glock fanboys but the truth hurts. There latest "big Release" was a .22lr???? seriously?
@RikkShredLifestyle
3 ай бұрын
LOVE my Caniks!! Waiting for my XDM 3.8 Elite to ship home to my FFL this week. Excited!
@greybeard277
Жыл бұрын
Good video, thanks. I have a G30s and love it. I've been wanting to get a G29 or a G41, not sure which yet. Agree with you on the ambi controls.
@thegundungeon
Жыл бұрын
I will eventually get a 40 mos and set it up for hunting deer
@michaeljordan6090
11 ай бұрын
I have a Glock 29 with KKM barrel and tungsten guide rod, and carry 15 round mag with the grip sleeve and love it
@mikerobinson8734
9 ай бұрын
Just convert your 30s to 10mm. Then you’ll have a g29s.
@g.brooks5866
Жыл бұрын
Very interesting. This is by far the worst performance I've seen from this XDM model. In fact it's the only failure I've seen in that gun from several reviews including torturing it beyond anything Glock boasts. Would love to see a follow up with an explanation for the cause of that failure to cycle. Thanx for the great video!
@johncaban4310
3 ай бұрын
I have the Springfield XDM and I shoot at least 200 to 250 rounds through a gun before I determine if it's reliable. Carry gun either for EDC or woods carry. I shot every ammo through it including Underwood without a hiccup.
@Luke-wy1fn
2 ай бұрын
I have both. My experience is the jams are cartridge issues
@1sonjohn44
Жыл бұрын
Great video, I own both, and the 29 is a keeper.
@thegundungeon
Жыл бұрын
Thank you! I’m definitely keeping both lol
@Why...So...Stupid...
Жыл бұрын
The Springfield locked open because you hit the slide stop up from the recoil. Thats not the guns fault. Thats shooter error. Need to put your thumb on support hand.
@thegundungeon
Жыл бұрын
Very well could be. Haven’t had the issue before this video and haven’t had the time to try to replicate it but as soon as I figure it out I’ll update.
@g.brooks5866
Жыл бұрын
Any update on the issue? I put 320 rds through my brand new baby today (freedom munitions, Underwood range supply, Underwood XD)... experienced 6-7 same failures to cycle between three ppl including myself, between the three cartridges. All using excellent grip technique with different size hands. Everything else about the firearm was great but this issue may be deal breaking for CC... very discouraging
@thegundungeon
Жыл бұрын
@@g.brooks5866 I haven’t had time from work to mess with it much, I’m leaning toward a stiffer recoil spring to maybe see if that resolves the issue. I had this with my G29 using hot loads and the stiffer recoil spring solved it for that one.
@g.brooks5866
Жыл бұрын
@@thegundungeon Interesting, Thanx for the feedback. Is there an OEM or aftermarket option for the XDM Elite? Haven't seen one. And why would that prevent the slide stop from being engaged?
@thegundungeon
Жыл бұрын
@@g.brooks5866 I think it slows down the recoil and keeps it from slamming against the frame so hard. Weird things happen at extreme velocities lol
@ru2yaz33
6 ай бұрын
Springfield trigger feels ever so slightly better, but Glock is basically a reliable proven pistol. I prefer the lower/smaller barrel offset of Glock.
@embryedwards4821
Жыл бұрын
This is the second video where i've seen malfunctions in the xdm. The first one the youtuber was definitely unintentionally hitting the slide lock and was able to stop the issue when he really concentrated on it. I've watched gundungeon videos in the past with this gun and you've always had great results. I've watched maybe every other youtubers video on this gun and the thing just performs flawless over and over. So i expect something weird going on. I personally love, love the xdm 10mm. Its my favorite pistol. Never have had a malfunction yet. I also have the g29 and i shot it for the first time. Only several mags but i enjoyed it as well. There are some types of bullets i will not shoot out of it though. P+P ammo, aluminum cased bullets, and hard cast due to nonfully supported barrel. But i do like the gun.
@thegundungeon
Жыл бұрын
This issue resolved itself after more shooting. Don’t know if I adapted or the gun broke in but it’s not an issue any longer.
@embryedwards4821
Жыл бұрын
@@thegundungeon good to hear. Thanks for your great 10mm reviews. Give us more.
@jonbumcrot2934
6 ай бұрын
I have a plethora of Glocks and they all have aftermarket barrels and heavier recoil springs.
@shannonbarattini5772
9 ай бұрын
I have a colt delta elite in 10mm. BUTTT am thinking of getting a XDM in 10mm in the 3.8 . Can you get a 40s&w barrel for it? KISS ALWAYS and OLD DEVIL DOG.
@thegundungeon
9 ай бұрын
I believe Barsto makes one.
@GunsNGames248
6 ай бұрын
Lol people just be saying anything. Dude just buy a 40 cal if u want a 40
@shannonbarattini5772
3 ай бұрын
I have a 40 a S&W 411.😊
@michaelgearhart6685
6 ай бұрын
Could have been riding the slide stop on the Xdm I feel the Xdm is better overall than the glock 29 especially since you don't have to swap barrels it eats everything
@guardianminifarm8005
Жыл бұрын
I would go Glock. But not giddie about finicky barrels. Springfield makes great guns and always have. However, some of us still have a bad taste in our mouth over them trying to through us under the bus some years ago and never taking ownership of such a wrong. Others don't care and that is certainly fine. But some do care. And that is fine also. The beauty of liberty.
@thegundungeon
Жыл бұрын
Yeah I held a grudge for a while but they apologized and moved on. People forget bill ruger supported certain gun control and smith & Wesson, colt, all did things not in our favor as well.
@jerrypeevey
Жыл бұрын
My edc is a G29sf,,, don't feel the need to try anything else... My old hands required some larger release levers and I put a tricked out oem trigger from Johnny Glocks on it.... I don't experiment with rounds much either. I shoot range for practice and Hornady extreme for carry. The other pistol looks cool but I am not even sure it is for sale in the Communist Republic of California.
@Tool-Meister
5 ай бұрын
Your XDm lock-up may be due to improper thumb position. Check your grip. I’ve never had another failure to feed after correcting my hold. For me, recoil differs only slightly from my XDm ..40 S&W “hot” loads. XDm 10mm is my new fishing partner…
@thegundungeon
5 ай бұрын
Good chance of it. A stiffer recoil spring slowed the slide velocity enough where the issue went away.
@Tool-Meister
5 ай бұрын
@@thegundungeon probably tamed the recoil too!
@goatedtanks2267
29 күн бұрын
Try 90 gr or close to it
@astroidother3609
10 ай бұрын
I have both of these guns XDM Elite and G29SF Gen 4. Love them both but generally carry the G29 and use the XDM as a home defense option. I have an issue with the open backplate on the XDM, so prefer not to carry it. As I said I love them BOTH and shoot them pretty similarly. Underwood 165g 10mm as a carry load. Great video, thanks.
@thegundungeon
10 ай бұрын
Valid argument. Haven’t really thought about that
@ThisIsWhatIDo77
8 ай бұрын
What do you mean by open back plate ?
@astroidother3609
8 ай бұрын
@@ThisIsWhatIDo77 Big hole/opening on the backplate that allows debris in. Have you got one or seen one? I carried one and that was what relegated it to range and home defense. G29 took it’s place
@thegundungeon
8 ай бұрын
@@ThisIsWhatIDo77 there’s a significant size opening in the backplate of xdm’s
@KD-lb9bg
Жыл бұрын
With reliability being the most important factor, I'll stick with the Glock 29. Thanks for the comparison.
@Why...So...Stupid...
Жыл бұрын
The Springfield XD line is just sexy, except for the goofy looking one with a hammer. I have the XDS Mod2 OSP in 45acp. Awesome firearm. Handles the recoil like a champ. I do wish someone would make a gas pedel for that model. I went with the XDS because im very skinny and the XDS is thin as hell. Easy to conceal. Harder for me to not print with larger pistols.
@Joefrom_DirtyNJ
Жыл бұрын
Check out Go Guns they may have one per LW Road
@zenfinity3388
2 ай бұрын
XDM for me.
@BT2SS
4 ай бұрын
The G29 looks like it is WAY flatter shooting
@arnavwaghmare3324
9 ай бұрын
Do you feel like you have a better grip on the XDM or the Glock? I’ve heard that the XDM Elite 3.8 is almost identical in size to the Glock 19.
@thegundungeon
9 ай бұрын
Both are almost identical to the g19, just a little thicker. The stippling is more aggressive on the xdm though so that does help.
@arnavwaghmare3324
9 ай бұрын
@@thegundungeon thank you so much for the input. Happy holidays!
@ronolson2024
Жыл бұрын
Reliability trumps all, so Glock is superior. That said, I replaced my stock Glock 20 10mm unsupported barrel with a threaded KKM better supported barrel to shoot all ammo & has been 100% reliable. Also installed a -3.0 connector & did the 25 cent trigger polishing job. Added Talon grips for Glocks slippery grip, & walla, now have an expensive but reliable back woods carry pistol.
@thegundungeon
Жыл бұрын
Glock is tough to beat for sure
@Why...So...Stupid...
Жыл бұрын
The slide locked open because he hit the slide stop up, wasn't a failure of the pistol. That's the only possible cause of that. It happens a lot to people that don't shoot XDs all the time. He probably shoots Glocks all the time. I had the exact opposite problem when I first got mine. I kept hitting the slide release and it wouldn't lock open after last round. Once I started putting my thumb firmly on support hand, it stopped. Not knocking this man in any way. I support all 2A KZitemrs, this channel is very good.
@atomross13
Жыл бұрын
good comparison. Both had an issue.
@thegundungeon
Жыл бұрын
Yeah I was shocked by the xdm in this video, I’ve shot it a good bit and hadn’t had the slide locking issue before I turned on the camera. Unfortunately I haven’t had time to mess with it to see if I can replicate and diagnose it.
@thegundungeon
Жыл бұрын
@@Blankee-o1t yeah, needed shot more with the hotter loads. It went away after some rounds.
@gregorybrowe2
3 ай бұрын
The XDM is the superior gun. Glock isn’t making anything as good as Springfield
@bobups2031
Жыл бұрын
I fired my XDM elite 3.8 10mm for the first time,about 500 rounds,no problem,I emptied it all , including my wallet.Oh boy !! But it’s really good.😊 I did not hit in one group about 20 yards but all the bullets is inside the 8 inch circumference which is not bad for a rookie or just a luck probably.. I think I have to spend more ammo,but the price is not a joke anymore.oh boy again.Anyway it’s a good presentation we’ll done my friend,Peace be with you everyone.
@thegundungeon
Жыл бұрын
If you’re going to run much 10mm, you really need to look into hand loading.
@davidc3793
9 ай бұрын
I like that hat
@kdw75
6 ай бұрын
I have many Sigs and Springfields. If they don’t have a manual safety, they better have a grip safety. Glock needs to step up their game and offer a grip safety.
@thegundungeon
6 ай бұрын
I wouldn’t hold my breath on that one. You’re one of the few that like the grip safety, they’d never sell enough to cover the cost of tooling to justify it.
@kdw75
6 ай бұрын
@@thegundungeon The chances of me having an AD is far higher than my ever needing my gun for self defense, so to me it only makes sense. So many times things I carry during the day have turned off my manual safety.
@thegundungeon
6 ай бұрын
@@kdw75 I’m not disagreeing, just saying it’s not the popular opinion lol. I doubt there is enough market demand for it to persuade Glock to make it an option. If we can’t even get them to produce a PCC… lol
@Dirty2Clean1980
4 ай бұрын
I actually like grip safeties now. If i have a close range threat and am shooti g from the hip because there is no time to aim, i sure dont want a regular safety i have to switch off when i can pull and squeez. It could save your life.
@kdw75
4 ай бұрын
@@Dirty2Clean1980 Yeah, I literally can't imagine anyone NOT wanting them. The only argument I have heard against them is people saying things like what if my hand is shot and I have to use my opposite hand to fire it upside down blah blah blah. Could it happen? Sure, but that chances of that happening is so infinitesimally small compared to the chance of an AD, that it seems like a no-brainer to me.
@GunsNGames248
6 ай бұрын
G29 is a great 10mm
@TOW2MAN
5 ай бұрын
Looks like you need to tighten up your wrist a bit.
@l.davesteele3227
11 ай бұрын
You really are fool of it the x.d.m.. is a much better gun in evry way and hits harder than glock .
@thegundungeon
11 ай бұрын
How does the xdm hit harder than the Glock? They are chambered in the same round.
@vannevels6758
8 ай бұрын
The 10 is just too much for guns this small. Ultimately, a 9 is a better carry option; more rounds and much less recoil cuz it's the 2nd and 3rd shots that really make the difference.
@thegundungeon
8 ай бұрын
Eh if you train with it you can use it effectively. I have a short coming out where a viewer asked me to see how fast I could hit 4 different targets with 4 shots from the g29. With full power loads it was less than 2 seconds from the beep.
@vannevels6758
8 ай бұрын
@@thegundungeon it just seems like more "mine's bigger than yours" macho shit than it's that much more effective in the real world unless you're around bears more than people. Idt the guy in the video shooting a 10mm glock with a switch was using a 29.
@thegundungeon
8 ай бұрын
@@vannevels6758 well I have a few videos coming out that may change your mind, specifically heavy winter clothing video. Stay tuned lol
@vannevels6758
8 ай бұрын
@@thegundungeon I will
@GunsNGames248
6 ай бұрын
You just not a realcman and can't handle 10mm
@SuperD00D
4 ай бұрын
4:56 5:07
@michaelhodges8312
Жыл бұрын
Hands down for the Glock 29 with Alpha Wolf barrel and McNally trigger assembly. The thin blackstrap safety on the XDM is a negative deal breaker for me.
@kenkempa9907
10 ай бұрын
So, buy a Glock... then have to buy a barrel... then need to buy a trigger group... So you can't just buy a Glock???
@michaelhodges8312
10 ай бұрын
@@kenkempa9907 I go for an optimum field gun for me, whether I have to spend more money or not to get there. Glock 29 with that McNally trigger assembly and Alpha Wolf barrel is far better field gun than an XDM.
@louismatassa8489
9 ай бұрын
Springfield armory 🇺🇸
@davidjernigan7576
Жыл бұрын
I think I would prefer the 10mm Tanfoglio polymer frame compact over either of these.
@thegundungeon
Жыл бұрын
I’ll have to take a look at that one
@StevenRogers-hw9dj
9 ай бұрын
I have the Tanfoglio poly compact and the XD-M 3.8 in 10mm. Both triggers are MUCH better than the Glock, with the Springfield having the better DA (not really DA, of course) pull and the Tanny having a fantastic SA. I'm still carrying the XD-M, but if the Tanfoglio had a decocker, it would likely be my EDC.
@wolco003
Жыл бұрын
Surprising. If I had the option behind enemy lines I would not have bought my Glock 29SF. If the roster goes eventually, or I make my escape, I want an XDM...originally figured I'd sell the 2x4 with a crappy grip angle but now time will tell on that. Shocked on the XDM failures. I have owned a 5" XD40 for 15 years and shoot it really well. THANK YOU for the comparison!!!!
@thegundungeon
Жыл бұрын
Fire issues I’ve had with the xdm. Thanks for watching!
@StevenRogers-hw9dj
9 ай бұрын
I've had my XD-M 3.8 10mm to the range every 3 or 4 weeks since I've owned it... 11 months..., put 75 -100 rounds through it every time, and still haven't had a single failure. I run at least a box of Underwood 180 gr. or 200 gr. JHPs every time, along with a 50-round box or more of 180 gr. FMJs, Remington, Winchester, Blazer or S&B.
@wolco003
9 ай бұрын
@@StevenRogers-hw9dj Thanks! The rumor is CA may put it on the roster next year.
@garrett892
7 күн бұрын
New Springfield like to be run wet. Glocks shoot out of the box
@dilfbag
Жыл бұрын
🤘😎🤘
@jeffcarr2265
8 ай бұрын
I've never had a ram in my XDM ever
@crazymike4894
7 ай бұрын
You wanna listen the recoil more call up Glock Store get a tungsten guide rod. Do you want to lessen it up more put a TR seven light on it that’ll take away some recoil did for my 30 Glock.
@stephenpatton8690
9 ай бұрын
Are you seriously not going to put them side by side? Carry dimensions are the only reason to get a 10mm this small. No one cares how you shoot it. Won't ever get THIS time back.
Пікірлер: 147