Let’s hope this f150 doesn’t go down the same rabbit hole the stang did and it’s just build build build and no racing😅🤣
@DavidVanVoris
8 ай бұрын
Probably
@aldoshifts8395
8 ай бұрын
did you retain ABS on the f150 with the TBM kit?
@alejandrowilcox763
7 ай бұрын
Recently bought myself a 23’ single cab 5.0. Would you say the truck and motor for the 23s are reliable for a daily/street build ? What are “problems” that someone should look out for?
@jkfonyi
8 ай бұрын
Thought you had to build 10r80 every 10 passes 5 if you use trans brake .
@scottrichardson4769
7 ай бұрын
Damn David you’re over due for a trim. Putting in all those man hours.
@tomhamilton9140
8 ай бұрын
Progress 😎 any updates on the race car?
@mountndome
7 ай бұрын
Whens the cage going in ?
@AC-kp8sp
8 ай бұрын
Is 10r really that bad?
@BobbyRogers-n5s
8 ай бұрын
I have a 2015 ford Mustang GT twin turbo. I live in Oklahoma the car was built by one of the top street outlaws guy who I will not name on post. It needs a complete fuel system because it is running a boost a pump. Is that something you guys do.
@DavidVanVoris
8 ай бұрын
Yep! Fore certified dealer and installer email me sales@coyotedirect.com
@chriscarr2325
8 ай бұрын
This is a weird looking Fox Body update. 😂😂
@DavidVanVoris
8 ай бұрын
Aha shhhh
@jkfonyi
8 ай бұрын
@@DavidVanVorisya I thought 2 months ago I heard some guy that looked like you say foxbody update in next video or two . Maybe my Alzheimer’s is kicking in but I can’t remember what was In that video .
@djwilliams9842
8 ай бұрын
Nice, trying to get caught up. but where is the fox body?
@DavidVanVoris
8 ай бұрын
At joes getting some upgrades
@HellcatDreaminJosh
8 ай бұрын
David Van Voris Great Video I think Barry absolutely incredible TT Mustang GT is looking absolutely incredible and I can't wait to see how it'll perform at TX2K24
@lonzo0110
8 ай бұрын
Ok I'm jealous
@DavidVanVoris
8 ай бұрын
Stoppppp
@RightDucman
8 ай бұрын
Sharp truck...Very clean work on the brackets, wiring and overall layout - looking forward to the finished project. Take care 😎
@DavidVanVoris
8 ай бұрын
Thank you! Just trying to improve
@underfedcoyote5.022
8 ай бұрын
Very nice (work truck) the builds going on at your shop always impress. Clean work
@DavidVanVoris
8 ай бұрын
Thanks brotha!
@mustangal8534
8 ай бұрын
Very nice truck, well thought out like a show truck but in a race truck. Looking awesome.
@DavidVanVoris
8 ай бұрын
Thanks!
@davidreed5300
8 ай бұрын
Did I miss something? What happened to the fox body?
@DavidVanVoris
8 ай бұрын
It’s in a garage lol
@lunchtime5310
8 ай бұрын
Smexy
@JakeSalbert
8 ай бұрын
If your boost lines can be laid out with only straights or with a 90 end then you can use allstar performance stainless steel coated lines. They’re crimped, ptfe, & have a nice black coating to look clean. Best of all is that they’re cheaper then buying the materials & fittings to build your own line.
@DavidVanVoris
8 ай бұрын
Nice I’ll look into them
@JakeSalbert
8 ай бұрын
@@DavidVanVoris part number ALL48354 just for reference, different premade lengths with either two straights or a straight & a 90. I used them for oil feed & boost reference lines on my twin turbo c6 where everything is confined in the fenders & was worried about heat
@vonlipichracing251
8 ай бұрын
Great to see progress on both of these builds!
@DavidVanVoris
8 ай бұрын
Thanks bro
@Robs347YSI
8 ай бұрын
You promised a Foxbody update a few episodes ago.
@DavidVanVoris
8 ай бұрын
Yeah I know
@jkfonyi
8 ай бұрын
That promise was a few months ago now .
@Gladiatorguy1998
8 ай бұрын
Your work is amazing.
@DavidVanVoris
8 ай бұрын
Thank you! We are just trying to improve on every build
Пікірлер: 39