One of the most interesting channel on KZitem! Keep it up!
@greekdrivers
6 жыл бұрын
dude, your channel should have more subs cause the work you do is absolutely stunning!
@sreetips
6 жыл бұрын
Appreciate that, thank you.
@captainjerk
6 жыл бұрын
Great vid buddy! Didn't get exactly what was anticipated, but that's science for ya! Throws us a curve-ball now and again. Thanx again! :D
@scott27288
5 жыл бұрын
I have to give you props for hanging in there and getting what you could get out of it. I admit I would've given up the first time the gold precipitated back into solution. Good job.
@kenjett2434
4 жыл бұрын
That was a amateur mistake you cannot precipitate out of solution without denoxing any leftover active acids first. Urea should have been added slowly till it stoped reacting. Only then can you add percipetant to drop your metals out of solution.
@jameslaird6432
4 жыл бұрын
You actually explained everything thoroughly. Other videos used text, or robot voices. This was a very entertaining, and educational experience, watching this, and I would like to say thank you. I was rooting for you, the whole 47:39 mins. Did not skip any of it. Again thanks alot.
@sreetips
4 жыл бұрын
James, if I had to do it again I'd incinerate to a fine ash then hit the ash with aqua regia instead of using acid peroxide.
@bevettecruz2110
4 жыл бұрын
I can appreciate all the time you put in this video..chemistry like all science is trial n error over n over.as for myself ..the whole process just sends my committee into OVERLOAD.
@lukasblazek5225
6 жыл бұрын
Wow this was hell of the work. Thank you.
@mrgreenswelding2853
5 жыл бұрын
Awesome video, i love the content and learn heaps. I have used ammonium perchloride for removing gold foils. Now i nedd the nitric acid to purify them.
@mondogecko01
5 жыл бұрын
I love your videos you remind me of my geology and chemistry professor faud nobari and Mr Stan..
@darylnorrad544
6 жыл бұрын
Thanks for sharing your methods.
@xenaguy01
3 жыл бұрын
45:00 That's about triple the return I was expecting to see. Congratz!
@JayDee-kw8oz
2 жыл бұрын
looks like something they would find in a stream
@northequator9297
4 жыл бұрын
Great job with the camera work, real good video
@golder70
6 жыл бұрын
Thanks for the Video! Excellent Quality like always. As you showed in 2016 already, SIM Cards are not worth the effort, even if you get them for free. But ist a Gold refiners challenge :-) Your actual yield is lower than expected in respect to your 2016 Video. I calculated a 2g yield from the roughly 1200g of SIM Cards. I think incineration from the beginning would have been the optimal approach. But we wouldn't know for sure without this Video of yours. Thanks again.
@benwinkel
5 жыл бұрын
I bet you get more yield on copper and tin on your waste bucket, than on gold out of these simcards. You'd need a shitload more and a more efficient process to make a profit. But hey, it's a learning process, very informational and great fun to watch! Keep doing this!
@slugtheslayer
5 жыл бұрын
thanks again for making your videos.
@mikewright1226
6 ай бұрын
Another fine video. You are a great inspiration. I was eager to see a good yield and was able to share in your disappointment..
@antwano153
3 жыл бұрын
I ADMIRE YOUR PATIENCE WELL DONE
@robertlewis5611
4 жыл бұрын
You can use vinegar peroxide and Morton sea salt to extract the gold foils from the SIM cards works really good it just has to set longer
@edwardcunningham6315
2 ай бұрын
Great job with the video. Putting the filter on the camera. You are a handful of only a few who go above and beyond for your viewers 👍👍. I've tried BGTs and ICs but have found the manufacturers are VERY skimpy on their precious metals. I'm in the process of extracting silver and palladium or platinum (I hope) from old radio crystals. I'm dealing with a LOT of quartz debris that is being a bit stubborn. We'll see how "skimpy" the manufacturers were back in the mid 90s😁. Keep recording, we'll keep commenting 😁👍❤️🙏
@nirajsrivastava226
6 жыл бұрын
Really it's very nice video. Waiting 4 your part 2 of catalytic converter
@sreetips
6 жыл бұрын
It's coming,mesh ould be much shorter than the recovery video part 1 of 2
@emilee172
3 жыл бұрын
wouldnt a vibration table or ultrasonic work better at keeping it agitated ?
@robertbrawley5048
3 жыл бұрын
The pot transistors that are raised above the circuit board base . They look like steel buckets about a quarter inch square . They typically have gold plating bottom plates . Gold plated on both sides. You have to pry off the steel buckets to reveal the gold plating or detach from the circuit board and look on the bottom side where the naked wires come out
@mariecoloma4131
3 жыл бұрын
Wohh! Almost! Great job.
@l8trh4ter
4 жыл бұрын
I wonder if using something like a wiper motor from a car, you could create a agitator that would keep the product moving and perhaps friction might help to remove the foils more quickly
@kassiman5307
6 жыл бұрын
THATS A GREAT VIDEO .... NICE JOB ....!
@theagency13
4 жыл бұрын
Awesome video thanks, could you please estimate how much materials cost you expended. I would love to know how much it cost you to produce the 1.7 gram of gold.
@mohmadborhan4388
6 жыл бұрын
i am Excited for the next video i hope it will be the catalyst recovery..good work
@sreetips
6 жыл бұрын
I just finished part one of the cats video, it should be posted by tomorrow..... finally!
@greezythumb
3 жыл бұрын
Wow! Very educational.
@cynthiashallow8892
4 жыл бұрын
Nice work u deserve more sub than this for your great work
@Jason-vn5xj
4 жыл бұрын
I'm curious how you might approach this differently now with the lessons learned from this batch? Would more initial mass make the time & material investment more worthwhile (4lbs? 5lbs?) Also, if you started with incineration, would you follow that with the aqua regia right away or still wash with nitric acid to dissolve the substrate metals first, then AR etc? I'm fascinated by the chemistry and I really enjoy watching your work. Thank you!
@sreetips
4 жыл бұрын
I’d burn it first thing. No question
@KUSHxKiNG
Жыл бұрын
Came along way in production quality since this. No wonder you don’t do the SIM cards anymore. Your on to bigger and better things these days😂😂
@aaronconley4256
3 жыл бұрын
I have watched most of your videos. Very informative! You know your craft well. I have some metallurgical background but not in this style. I am genuinely curious if anything is actually profitable from buying bulk and refining from a small perspective. I do have a question, have you tried to refine the computer part "gold" bars from eBay? Would it be something to look into? Most look like brass to me.
@sreetips
3 жыл бұрын
Drop melt bars various computer parts melted together. I’ve got a video on it. They are a total ripoff. You pay $29 for $2 worth of brass and get just a trace of gold - almost nothing.,My experience. Please see my video titled “how to make a profit refining precious metals.”
@glassbunny5390
3 жыл бұрын
Doesn't too much smb make other metals precipitate out? If more is added when theres no presence of gold?
@KD0CAC
6 жыл бұрын
Not on this video , but related . I searched you channel and found a couple videos dealing with you stock pot - getting more out of them . Also looked with waste , but didn't find if there was one , on dealing with options of eliminating chemical waste . I have not seen much , but many seem to ignore lesser metals , at least copper and maybe lead & tin , should be a lot percentage wise . Still trying get enough volume doing electronics repair , scrapping has become a side line . With gold silver etc. being a hobby ;)
@josephkrestan3093
4 жыл бұрын
Great Video, thanks. Joe
@drubradley8821
6 жыл бұрын
I think I smoked another half a pack of cig's on this one, had me on the edge of my chair again.. Great video ! Dru
@__BERSERKER__
4 жыл бұрын
great troll. IM clapping.
@nathanhyland9673
4 жыл бұрын
Sweet
@seydoudia7828
3 жыл бұрын
stop smoking
@joewilliams5095
3 жыл бұрын
@@__BERSERKER__ you ready no the aquaridgea is the best way I think brother nice ...
@SilverBull30
3 жыл бұрын
thats alot a cigs bro lol I am in the process of quitting down to just 1-2 a day! I know you were just kidding here a bit, have a great day.
@mikemalo6336
4 жыл бұрын
this guy is the most optimistic person on Earth
@billygagne2139
5 жыл бұрын
You're awesome buddy! Breaking Good.. lol
@ironghostrotation
4 жыл бұрын
This is alot of work for a small pay out how much gold did you yeild at the end of the 20 days? Either way super cool
@edj1963
4 жыл бұрын
Just watching this and have a question. Would pulverizing these cards or any PC scrap I guess, in a ball mill be more efficient than burning? Thanks for sharing your work.
@sreetips
4 жыл бұрын
For the best yield these should be incinerated to a fine ash. Then extract the gold with aqua regia.
@aga5897
6 жыл бұрын
Great video ! Getting better every time. Idea: write 'sreetips' backwards inside the corningware. It'll reflect the right way round off the big beakers ;) Who said denox ? wasn't me ....
@sreetips
6 жыл бұрын
Reverse spelling for the reflection, brilliant!
@guygordon2780
4 жыл бұрын
It would make a good joke. Every once in a while it intrudes on the video. If I saw it in a reflection, but corrected, I'd have a good laugh.
@davidtwining4059
2 жыл бұрын
Great video thanks.
@jowens1126
2 жыл бұрын
If you could figure a way to put a big massive magnetic stir bar in there to keep those sim cards heavily stirring that would likely speed the stripping process up significantly.
@robertnoyes1115
4 жыл бұрын
it was very informative thanks
@matthewbrogger1012
Жыл бұрын
I just love watching your videos vary cool processes to extract the metals love the silver ones cant find your store on ebay
@sreetips
Жыл бұрын
My eBay user name is “sreetips”
@donaldscott7624
4 жыл бұрын
Awesome video, I have been recovering silver from unused large Ag+/AgCl batteries. These are hard Ag+/AgCl and Magnesium plates that are easily separated. The best method of conversion is a work in progress. Any suggestions?
@sreetips
4 жыл бұрын
I thought those batteries were silver oxide. Silver oxide should melt directly into silver after removing it from the case
@vincenttelfer4206
5 жыл бұрын
another great video, maybe increase the air flow and spread it out or a blender with extended arms mounted on the lid. do you reuse the chemicals?
@sreetips
5 жыл бұрын
I think the acid peroxide solution can be reused.
@Spankyblack69
4 жыл бұрын
Experimentation is the name of the game sometimes. Great job Sreetips.
@sreetips
4 жыл бұрын
I'd like to try these again. Incinerate to a fine ash then aqua regia.
@WisconsinForward
4 жыл бұрын
@@sreetips Have you considered putting them into a blender whole to make a granular plastic / gold mixture and then burning them with the torch to fine ash then refining with aqua regia?
@michaelgrinder5946
3 жыл бұрын
At 39:04 you said "boy this is going to be fun" , and i thought i was going to fall out of my chair from laughing so hard !!! Up until then i was thinking this poor man has spent hours working on this and i already would have given up if it was me , but in the name of science you stayed in the trenches , good man !!!!
@waynoswaynos
3 жыл бұрын
Thanks Sreetips. It was a tricky one but a good lesson all the same. Any thoughts on getting a small kiln in the future so you might do as our metallurgical forefathers did, and reduce such things into a button and then use a bone ash cupel and Pb to remove the base metals? I wonder if there would be losses that way also. The obvious gains would be the ability to complete the entire process in a matter of hours, as opposed to many days.
@sreetips
3 жыл бұрын
I should have burned the SIM cards. Then hit the ash hard with aqua regia
@garymcnew4145
6 жыл бұрын
Great video, I was not surprised on the yield, it takes a lot of sim cards to produce a small yield. I have played around with them a little my self. One question though, was there a reason you did not denox the excess nitric with urea in lieu of saturating with SMB?
@karlbe8414
6 жыл бұрын
My question as well... I was surprised to not see you deNox with Sulfamic acid ?? But very clear process, per your usual great videos.
@sreetips
6 жыл бұрын
Gary, I don't have any urea because I never use it. I did have sulfamic but I just kept adding SMB until all the excess nitric was gone
@sreetips
6 жыл бұрын
Karl, I had it, but I just kept adding SMB until all the nitric was gone and the gold came down completely (with the crystalized SMB)
@karlbe8414
6 жыл бұрын
I just checked ebay prices for sulfamic vs SMB and just looking at the first listing, SMB $20/lb. with Sulfamic Acid @ $6/lb. And then not those SMB crystal ppt. to deal with. Again, your videos are outstanding, this one showed your problem solving abilities and experience.
@gregciesielski683
3 жыл бұрын
Learn something new every time I watch
@sirfishslayer5100
4 жыл бұрын
Can you do a video on the waste liquid processing? It would be nice to see the process and the cost to process waste.
@Boemel
4 жыл бұрын
just poor it down the drain in the street like everyone else ...
@burtburt2263
4 жыл бұрын
"Why are we all getting cancer?" Oh, that's why...
@brianclark17
4 жыл бұрын
I believe he made one a couple of years ago...
@indraprayogi2230
4 жыл бұрын
He just ignore
@johnyrebel188
4 жыл бұрын
add sugar and ice! great on a hot day
@budihandoyo2956
5 жыл бұрын
H! mr.sreetips.. A have a question. In your first attempt adding the SMB in 18:18 is that possible you will precipitate other metals too (ex:copper)?
@sreetips
5 жыл бұрын
I don't think SMB will precipitate copper. But if copper is in solution with the gold then some of the copper solution may get trapped in the precipitated gold and contaminate it. Thorough rinsing will rid the gold of the copper. It's always best to do a second refining if you have a bunch of copper in your gold refining waste solution.
@budihandoyo2956
5 жыл бұрын
Thankyou :)
@bushwacker3292
4 жыл бұрын
Awesome 👍 thanks for sharing
@franciscoesterripa7912
3 жыл бұрын
What kind of fumes extractor for indoors you are using , ?
@sreetips
3 жыл бұрын
It’s a fume hood
@DanMorelle
3 жыл бұрын
sreetips really has nailed down branding.
@marifloyd1543
4 жыл бұрын
For future reference, brown bottle 3percent h2o2 is considered ten volume, so 40 volume h2o2 would be fo ur times as strong or 12 percent
@sreetips
4 жыл бұрын
I didn't know that, thank you.
@keithstreeter9054
2 жыл бұрын
I’m amazed that your yield was so low from the SIM cards. I wonder if it’s due to the foils on the SIM cards being so thin. Also, any idea why the acid bath was not successful to get the foils to release? Thanks for this great video!
@sreetips
2 жыл бұрын
I’m not sure. I’ve only done SIM cards this one time.
@brucejones6780
6 жыл бұрын
Thank You Sir
@ourodolixo-e
6 жыл бұрын
Very good...
@TwoGrainsOfGold
2 жыл бұрын
This is SO cool. Have you thought about having summer camps for teens teaching them this? My kids are fascinated! Thank you!
@tvgo4111
6 жыл бұрын
If you have an excess of hno3 then we must do to remove all hno3 in it
@AwakeningEnthusiast
4 жыл бұрын
Why are you not utilizing both ports from the air pump? I have that same pump and I know that it doesn't pump a crazy amount of are so you may as well be using both of them to your advantage
@unclequack5445
4 жыл бұрын
So you have to buy all the raw materials to extract the gold, then there's all your chemicals that cost money then all your working time so do you turn any profit at all? or is it pretty much a break even deal?
@sreetips
4 жыл бұрын
It's a loss. I don't refine escrap anymore because the yields are too low.
@joshuasallee4840
3 жыл бұрын
I enjoy your knowledge sir. I take my sim cards and place them in a pan of ALL purpose sand and place the pan on a burner so I can control my heat. Put small amount of sim cards on top of the sand. Mix with sand it takes about 10 mins and it will steam the plastic off my cards. U have to watch because they will stick together. Not the gold but the plastic
@joshuasallee4840
3 жыл бұрын
If u try it let me know if it works for u sir. I can send a video
@sreetips
3 жыл бұрын
Joshua, I haven’t done these is a long time. The amount of gold is small
@dryan8377
4 жыл бұрын
Damn. I'm waiting for him to come out of his RV in the Arizona desert in a lab apron and underwear!
@evileyemcgaming
4 жыл бұрын
lol
@bobbydigital7482
4 жыл бұрын
SpaXpert that would be a New Mexican desert
@dryan8377
4 жыл бұрын
@@bobbydigital7482 oh hell you're right! Good catch Bobby!
@Scapularbore
3 жыл бұрын
You watch too much tv.
@Card_Asylum
3 жыл бұрын
@@Scapularbore *too
@edwardhughes352
6 жыл бұрын
Good video as usual. I wonder if you got all the gold from the acid peroxide step. I have a bunch of sim cards but i'm not going to rush to process them for the gold. I'd get more money on ebay (thats where I got them) but it feels like I'm scaming someone if I do that.
@sreetips
6 жыл бұрын
If I did this again I would skip the acid peroxide and just burn the SIM cards to ash. Then grind the ash up with a mortar and pestle, then hit the fine powder with aqua regia. I might order some more and redo the experiment using that process.
@ElectronicSkateboard
4 жыл бұрын
I don't understand why you would bother, when the yield was a fraction of the cost of sims.
@tobyboles5932
3 жыл бұрын
awesome video thanks
@dariusz07
4 жыл бұрын
You should try dissolving simcards in acetone or paint thinner. Paint Thinner is better because it dissolves slower than acetone, and after about 30 minutes you can take out chips and plastics, and reuse the thinner, While 30 minutes in acetone and it is quite polluted with liquid plastics (but maybe its cheaper way, I must test it more).
@merisceric
2 жыл бұрын
Hey mate. You made the Ammonium Thiocyanate test at 36:50 and saw that there was iron in the solution. You left it in the solution and melted it later with the gold right? Is there a way to get rid of the iron?
@sreetips
2 жыл бұрын
Best to rinse the iron off before melting
@merisceric
2 жыл бұрын
@@sreetips Okay, thanks for the answer!
@endringresi9181
4 жыл бұрын
are you washing that with water the remaining of the tank
@dvinnyq2889
3 жыл бұрын
@sreetips So after the first filter of foils, is the gold contaminated with other metals also or did the acid dissolve those metals? How much gold do you loose after you liquefied and then precipitate back into solid? Does the acid (any acid) eat away any amount of gold that cannot be recovered? Is this the best method for unpopulated NEW circit boards? I have so many i need to either sell or continue this process. Thanks for your videos. This is a great way to keep people from hurting themselves due to lack of knowledge. Again thanks for sharing knowledge.
@sreetips
3 жыл бұрын
Not quite sure of their composition, but the foils are not pure gold. It would be best to incinerate all these cards to an ash and then recover the gold from that ash with hot aqua regia. But there is so little gold here that is hardly worth the effort.
@dvinnyq2889
3 жыл бұрын
@@sreetips I have blank green boards unpopulated, with nicely plated gold contacts to solder. These are new boards, some are 3in x 3in, some 6in x 4in. Approximately 50 of the small boards and roughly 20 of the larger. Can i send pics to see if you would be interested in another project, maybe another video?
@sreetips
3 жыл бұрын
Sorry, I only refine my own material
@timhull8664
4 жыл бұрын
Sreetips why dont you get a ball mill and pulverise these circuit type boards then do your extractions. More surface area means faster reactions.
@charliecash8661
4 жыл бұрын
Why the nitric acid? What happens If we only use HCL?
@shaneyork300
3 жыл бұрын
I can watch this stuff all day. My daughter showed me that I can watch you on my flatscreen tv it's only a 55" but it's going to be cool to watch your vids on it instead of my little phone. However it won't allow me to comment on it, at least I don't think it will. Have a GREAT Day My Friend!!!
@njanderson4342
6 жыл бұрын
In your case, I think Patreon wouldn't be charity. I think lots of your viewers would like to chip in a couple of bucks for these excellent lessons. I would, but I can't afford to buy gold and I don't want any jewelry. If you feel strongly about not taking any charity, you could do give-aways of gold buttons or whatever when the experiments have been thoroughly paid for. I supported a miner and he sent me a little rough gem as a thank you and it was so much fun.
@allianceofsteel
4 жыл бұрын
i'm surprised you didn't put thoose in a blender like you did the hard drive bits, powder them up, easy to separate the powder you'd think.
@GarysBBQSupplies
5 жыл бұрын
What would have happened if you had added a few ml of Nitric acid to the batch?
@yosefelhurti301
2 жыл бұрын
You so professional man you are the best on ol
@kevinmckenny520
4 жыл бұрын
You should use some kind of agitator along with the bubbler.
@burtburt2263
4 жыл бұрын
Nah, it's better to use a ball mill, and then run it through the blue bowl...
@ckgaming5966
6 жыл бұрын
I love watching your stuff but cant get over the loss you absorb in your experiments! Spent close to $225 on the chips for about $70 in gold, thats rough!
@dylandownright8844
6 жыл бұрын
Xtreme Performance very true! I avoid buying any sort of scrap from ebay. Even the gold filled stuff that one used to get good prices on has skyrocketed in the last few years. People paying well over spot for the stuff.
@weatherphobia
5 жыл бұрын
ADS! ADS!!!! REPEAT AFTER ME, ADS!!!!!!!!!!!!!!!!!!!!!
@jimmyellison2766
4 жыл бұрын
@@weatherphobia no shit
@shaneyork300
4 жыл бұрын
I'm thinking about doing the vinegar and salt mix to recover some gold and then probably put the filter paper from those recoveries in jar, till I'm ready to refine and melt! With green fiber do you think that would be a good first try at gold recovery?? Or do you have any other words of wisdom for me? Have a GREAT Day!!!
@sreetips
4 жыл бұрын
Shane, I’m not that familiar with salt and vinegar. I remember that the yield was low for that experiment.
@paulscottpadgett1996
3 жыл бұрын
Much Respect 💪
@rrfields65
6 жыл бұрын
Maybe try and rig up something like a sealed up small centrifuge wash machine out of 5gal. bucket with outlet & hose at bottom to drain into filtered vac beaker , should save alot of time here @ 30:45 ???
@yoopermann7942
4 жыл бұрын
would aqua-rigaia worked ? intresting though
@morningstar829
4 жыл бұрын
I think you lost much of your gold on the burn. That ash is very lightweight and can be carried away easily with tiny flecks of gold on the ash. But overall I think you did as best of a job as possible. My question is; Would it be possible to dissolve and separate via gravity (the plastic that dissolves floats on the top of the acetone and metal sinks) the plastic components away from the metallic components using something like acetone before using aqua regia to dissolve the metals?
@sreetips
4 жыл бұрын
I don't know. I don't have much experience with this kind of material. The yields are too low.
@SURFEAMORETERNO
6 жыл бұрын
Another beautiful production. Sorry if i'm are inconvenient in ask, but what about the gold that were left on the filter separated with the hydrochloric acid and the peroxide at the beginning of the video? And,would not it be nice to add some sulfuric acid to the solution containing iron? The ferrous sulphate formed could release some gold that was bound to iron. Just theoretically speaking.
@sreetips
6 жыл бұрын
The filter with the gold foils was in the big beaker. I poured the incinerated SIM cards right on top of it and then hit everything with aqua regia.
@SURFEAMORETERNO
6 жыл бұрын
Truth! It was even mentioned. I hoped it would be possible for a slightly more expressive gold result from those cards. Thanks!
@kellyswoodyard
3 жыл бұрын
To get them to strip completely, it takes a couple of days in A/P. I don't process anywhere near that amount, but I use a 1 litre beaker with A/P at about 70-80c, with a bubbler, for about 3 days. All are as clean as a whistle.
@sreetips
3 жыл бұрын
If I had to do this again I’d incinerate to a fine ash then extract the gold with aqua regia
@BarryNeely
5 жыл бұрын
could u extract more from cards if they had been coarsely grounded before soaking?
@sreetips
5 жыл бұрын
That is a possibility. After doing this experiment I think that grinding them up and then burning everything to an ash then hitting the pulverized ash with aqua regia would make a good experiment. This wet process was a mess.
@bobwerner6512
3 жыл бұрын
Are you using home made SnCL It looks clear like the stuff I use
@sreetips
3 жыл бұрын
I use 1 gram pure tin shot, 1 gram stannous chloride crystals, 25ml DH2O and 30 drops hcl
@catalinchelbea8739
2 жыл бұрын
I always wondered. You need any license for this kind of experiment? Or you don't need to.
@sreetips
2 жыл бұрын
I don’t think you need a license to dissolve metals in acid. But you’ll want to check your local regs to be sure.
@iainohalloran42
4 жыл бұрын
Hi streetips I was wondering if you could do a video of gold refining from satellite LMB’s as the board is pretty much covered in the stuff. I love watching all your videos and I will continue to do so thank you so much and I hope you have a great day/night.
@sreetips
4 жыл бұрын
Electronic scrap is very popular. That's why I made the escrap videos. But honestly, the yields are just too low and the amount of waste high. For these reasons I don't do much escrap refining.
@joek511
4 жыл бұрын
LMB boards are not gold plated. They are gold flashed. 1 or 2 gold atoms thick. You will never get foils off of LMB boards, it will break up so small all you will see is microscopic glitter. i have a freind who gave me 10 lbs of them. I ran them just to show him how little there was. About .7 grams if I remember correctly, that was several years ago
@serenitymobileobservatory8262
6 жыл бұрын
I have been fascinated by your channel and videos here of late. Your quality has really come up especially since you started appearing and narrating. I get the impression you aren't a chemist by trade? What is your day job? Anyway, thank you for the videos, chemistry is cool.
@sreetips
6 жыл бұрын
I have no formal chemistry training. Everything has been trial and error with some help from the folks on the goldrefiningforum.com I work at a jewelry repair shop setting diamonds for customers. Chemistry is fascinating. Thank you.
@dylandownright8844
6 жыл бұрын
That's why I stopped doing the escrap as much, not much yield and unless you get the stuff for free it's hard to turn a profit. Glad to see it done for educational purposes though.
@roywhipple4923
3 жыл бұрын
I saw this thing on Cody's Lab where he had an issue with rinsing out the gold solution with Muriatic acid and then precipitating it with SMB because the acidity was too high , so he added some hot water and the gold dropped right out with the addition of hit water.
@sreetips
3 жыл бұрын
I’ve never had that happen
@hamdaouiJafar
7 ай бұрын
There will be a day i watched everything you made. Oh wise one!
@santababy1952
4 жыл бұрын
I see the problem is that the air pump only moves the sim cards in one place. Seems t o me you need to have about 3 pumps going or stand there for hours trying to stir the cards.
@DEmma1972
4 жыл бұрын
so did you test for gold on all the ashes that were left? I think you lost gold in a lot of steps and overall it wasnt efficient
@sreetips
4 жыл бұрын
I agree
@Burnningsoul
4 жыл бұрын
wonder if you heat the cards at a higher temperature,
@sreetips
4 жыл бұрын
These are best processed by incinerating to a fine ash then extracting the gold with aqua regia.
Пікірлер: 721