Just ordered the Titan and getting the csl dd , V3 pedals McLaren and WRC wheels. Can’t wait to play ACC with the setup.
@wademichalski768
2 жыл бұрын
same
@OKeefeist
2 жыл бұрын
Amazing setup hows it going
@wademichalski768
2 жыл бұрын
@@OKeefeist steep learning curve but now that ive figured out drifting its a lot of fun!
@dimsoneill
2 жыл бұрын
@@OKeefeist I'm loving life in the rig. In there every night, in an ACC league here in Oz which is a great crew of fast dudes, one of the best things I have ever brought👍
@RalonsoF1
Жыл бұрын
Thank you very much for this video! I will get my GT Omega Titan right tomorrow! Can't wait! 😊😊
@Jmab-rv7jc
Жыл бұрын
Nice 👍
@SuperEvenSteven
2 жыл бұрын
Thanks for the tour of your titan. I just realised that the Titan cockpit I ordered last year in Australia has a significantly different pedal tray mount to yours. Looks like they've extended the plate in front and used a new solid mounting plate design. Very jealous 😀 I did a video on my small channel trying to address the flex issue but yours looks way more solid!
@Jmab-rv7jc
2 жыл бұрын
I heard that gt omega had some complaints regarding the plate. They might revised it to be more sturdy to prevent flexing
@donkun1
2 жыл бұрын
I just ordered the GT Omega Titan in February and I also have the pedal tray like on their site. Your pedal tray has more mounting option and looks more stable. I also have the the Fanatec DD Pro and my pedals (screws at the end of the pedals) didn't line up like yours. Can you do another small video covering the pedal tray in detail. I think a lot of people would be interested to see that.
@Jmab-rv7jc
2 жыл бұрын
Will do when i get the chance
@poisedonis
2 жыл бұрын
I hope to get this set up in about a year, still using the thrust master for awhile
@Jmab-rv7jc
2 жыл бұрын
I was trying too, but its out of stock, also if the PSVR2 comes out. I wont have to use the tv. I can put the rig on the side.
@poisedonis
2 жыл бұрын
@@Jmab-rv7jc ya, will pick a vr set sometime soon, but using a 120 inch 4k projector screen which does a good job with 7.2.4 speaker system
@Jmab-rv7jc
2 жыл бұрын
@@poisedonis nice nice 👍
@Jmab-rv7jc
2 жыл бұрын
@@poisedonis hows the graphics on new projectors?
@poisedonis
2 жыл бұрын
@@Jmab-rv7jc well i have the epson 4050 which does really good, but im thinking to up grade to the epson ls12000, it has a contrast ratio of 2,500,000 to 1. Whereas the 4050 has 200,000 to 1. And hope to switch tge screen to a 135 inch. The screen would be cheap, about 1500 dollars, but the ls 12000 would be a little more than 6000 dollars. But all in good time. Been playing nfs heat lately with a little formula 1 as well
@GSekong
2 жыл бұрын
you should get the caster wheels for it
@DoomiePookie
2 жыл бұрын
I have the exact same setup lol.
@Jmab-rv7jc
2 жыл бұрын
Nice, how u likin it?
@DoomiePookie
2 жыл бұрын
@@Jmab-rv7jc its brilliant so far. No movement at all yet, and i play full torque with the 8nm.
@xtreemkiller7769
Жыл бұрын
Hi there, did yours come with the shifter mount or did you need to purchase this separately?
@Jmab-rv7jc
Жыл бұрын
It comes with a shifter mount. 👍
@xtreemkiller7769
Жыл бұрын
@@Jmab-rv7jc Yep I can confirm thank you. Received mine around 2 today and very pleased.
@Jmab-rv7jc
Жыл бұрын
@@xtreemkiller7769 nice. What wheelbase you using?
@xtreemkiller7769
Жыл бұрын
@@Jmab-rv7jc i have the logitech dd pro picked it up for 850 3 weeks ago but initially a week before id bought the tgt2 but sent it back when i heard about the logi. Thrustmaster th8a shifter and tlcm pedals, i kind of spent out but really happy with it all. Truforce on the wheel playong dirt rally literally shakes the rig and feels like your taking impacts and in vr. I waited for 4 weeks for the rig on pre-order and so glad i did wait rather than get something id regret later.
@Jmab-rv7jc
Жыл бұрын
@@xtreemkiller7769 nice nice. You using pc or console?
@EmambuxSheik518
Жыл бұрын
Was the ddpro direct fix to base? Or need to drill?
@Jmab-rv7jc
Жыл бұрын
Direct fit. Rig has diff holes for diff wheel bases
@ashlive2845
2 жыл бұрын
Did you have to drill any holes for the wheelbase or pedals?
@Jmab-rv7jc
2 жыл бұрын
No, theres a few holes already. U can move them further or closer
@ashlive2845
2 жыл бұрын
@@Jmab-rv7jc can you remember what length m6 and m8 bolts you needed to bolt pedals down?
@Jmab-rv7jc
2 жыл бұрын
@@ashlive2845 cant remember but the rig comes with some bolt. Ill check later if i still have the instruction
@Jmab-rv7jc
2 жыл бұрын
@@ashlive2845 8X16
@erictannenbaum2771
2 жыл бұрын
Hi, is the Pedal Mount the original or from another manufacturer. If so, what's its name? Regards
@Jmab-rv7jc
2 жыл бұрын
Pedal mount came with the rig
@erictannenbaum2771
2 жыл бұрын
@@Jmab-rv7jc Thank you for your answer. That is interessting because I have the Titan already an it seems there is a new version of the Pedal Mount. This one looks more stabil. Regards
@Jmab-rv7jc
2 жыл бұрын
@@erictannenbaum2771 how long do you have your titan?
@erictannenbaum2771
2 жыл бұрын
@@Jmab-rv7jc I bought it about two weeks ago. But I bought it privat on ebay. So I do not know how old it aktually is. My Pedal Mount looks like on the pictors of the GT Omega internet side. Your`s looks different.
@Jmab-rv7jc
2 жыл бұрын
@@erictannenbaum2771 i see. Could be older coz you bought from somebody? Did u buy it assembled or seller disassembled it?
@emilianoaccio
2 жыл бұрын
2k to play Gran Turismo?
@Jmab-rv7jc
2 жыл бұрын
You can get them without the load cell and shifter. The dd pro is abt $700 and the rig is about $650. You can also save $ by just clamping the wheelbase on a computer desk. And save $650
@emilianoaccio
2 жыл бұрын
@@Jmab-rv7jc I meant you should give up with Gran Turismo and switch to Iracing
@Jmab-rv7jc
2 жыл бұрын
@@emilianoaccio oh dd pro is pc and xbox ready. I have ACC on pc.
@Dutch-McLarenJk82-
Жыл бұрын
Is this better quality than the ART?
@Jmab-rv7jc
Жыл бұрын
Prolly this coz it cost $150 more. But it think the ART is just fine
@TheSuave187
2 жыл бұрын
How's the flex on it ?
@gregore38
Жыл бұрын
Is it enough solid for a DD ?
@Jmab-rv7jc
Жыл бұрын
Yes. For 8nm yeah prolly upto 15nm is good enough
@beargrillz613
2 жыл бұрын
can you make a cablemanagement video? I can barly see you cables LUL
Пікірлер: 60