Lol , that thing reminds me of the nodding dog that used to sit in the back window of my auntie's mk 1 Cortina back in the early 70's !!! 👍👍👍
@DCT_Aaron_Engineering
2 жыл бұрын
Hahaha 🤣 I remember those things. Don’t worry that’s my head at the moment. It’s wobbling because there is so much to do. Cheers Max 👍🍻
@MattysWorkshop
2 жыл бұрын
Gday Aaron, how awesome is that, I’m looking forward to seeing more of this mate, cheers
@DCT_Aaron_Engineering
2 жыл бұрын
G’day Matty. Thanks for watching mate. Yes so am I, but lots of new stuff to learn now. Fun times though. Cheers buddy 👍🍻
@bluehandsvideo
2 жыл бұрын
What a beauty!!! Looking forward to more. :)
@DCT_Aaron_Engineering
2 жыл бұрын
Thanks Mike. This is one of the two new VF2SS Haas mills at my new job. Cheers buddy 🍻
@bluehandsvideo
2 жыл бұрын
@@DCT_Aaron_Engineering So, does this mean you're going to be learning 5 axis? Are you going to be teaching it?
@Machine_NZ
2 жыл бұрын
Hi Aaron, certainly bring us more of this content!..Can't wait. Regards Kevin
@DCT_Aaron_Engineering
2 жыл бұрын
G’day Kevin. Thanks for stopping by mate. This is one of the six new Haas machines at my new job. Lots to learn now mate. Cheers 🍻
@Machine_NZ
2 жыл бұрын
@@DCT_Aaron_Engineering How's the new job so far?
@carneeki
2 жыл бұрын
Robochubby on a Friday night! That looks like a fun piece of kit :D
@DCT_Aaron_Engineering
2 жыл бұрын
G’day Adam. Hope you’re doing well buddy and settled in to your new job. This is my new job at the TAFE. More goodness to come buddy. Cheers 🍻
@carneeki
2 жыл бұрын
@@DCT_Aaron_Engineering I'm signed up to start a cert iv in cnc on Tuesday. Maybe I gotta transfer down south :D
@EZ_shop
2 жыл бұрын
OMG Aaron! Is that at your new job? That's so cool. Ciao, Marco
@DCT_Aaron_Engineering
2 жыл бұрын
G’day Marco. Yes mate this is the new job. It’s been 1 hectic week mate. My head has been swimming, and I haven’t even looked at the CNC machines yet. Cheers 🍻
@TheKnacklersWorkshop
2 жыл бұрын
Hello Aaron, That machine definitely "Haas" it - lol... a really cool machine... Take care. Paul,,
@DCT_Aaron_Engineering
2 жыл бұрын
G’day Paul. Love the play on words 😝. It’s a cool set up, and lots for me to learn. Cheers Aaron
@TAWPTool
2 жыл бұрын
Freaking beautiful!
@DCT_Aaron_Engineering
2 жыл бұрын
Thanks Guy. We have six new Haas machines at my new job. Lot for me learn. Bit nervous, haven’t touched a Haas machine in nearly 4 years. Cheers 🍻
@makosharkcnc7730
2 жыл бұрын
Hi Aaron, brand new machine? don't tell wife how much
@DCT_Aaron_Engineering
2 жыл бұрын
LOL, I wish it was mine. I’ve started a new job and we have six brand new Haas machines. Very exciting times and challenges ahead. Trust you’re well? Cheers 🍻
@mannycalavera121
2 жыл бұрын
Interested to see the code for that 5 axis movement
@DCT_Aaron_Engineering
2 жыл бұрын
Hi Manny, Kevin the Haas CNC technician wrote it after watching the “Haas tip of the day”. Apparently it wasn’t that difficult to do. Cheers buddy 👍🍻
@ydna
2 жыл бұрын
too clean!!
@DCT_Aaron_Engineering
2 жыл бұрын
G’day Andy. Hope you’ve been well buddy. When are you flying over (Downunder 🇦🇺). I need you to teach me some of your tricks. I’ve started a new job and been away from a Haas for nearly 4 yrs. We’ve got 6 new Haas machines to play with. Cheers 🍻
@ydna
2 жыл бұрын
@@DCT_Aaron_Engineering nice man! it's like riding a bike! now you gotta get some cool projects for those machines 🤔
@captainflappinjacks597
Жыл бұрын
210... or 160?
@DCT_Aaron_Engineering
Жыл бұрын
Hello, this one is the Haas TRT 210. It’s bigger than “Ben Hur” on this VF2 though. Cheers 🍻
@captainflappinjacks597
Жыл бұрын
@@DCT_Aaron_Engineering Thanks for the reply. Very nice looking setup you have there. Haas really made these new 5 axis rotaries streamlined. No reason to get a 4th now when you can just get one of these instead. I wanted the 210 but I'm afraid I'll loose too much table space so I think the 160 would be better in a VF2. But still, if you already have the 210, you could always use that as an excuse for buying a VF4 and tossing it in there... :)
@RobertBrown-lf8yq
2 жыл бұрын
Ahhhh well. I guess Mohammed did have to go to the mountain eh? 🤣 Aaron, are those bits of kit destined for your new ‘job’ ( I call it a ‘job’….. but I guess that’s like saying a candy store is ‘work’ to a kid eh? 🤣🤣🤣🤣 Regards…. and keep ‘em coming, Robert
@DCT_Aaron_Engineering
2 жыл бұрын
Hey Robert. It’s a bloody cool piece of kit mate. Can’t wait to get the spindle turning. Yes, this is at my new job (TAFE) it a new advanced manufacturing centre. Cheers buddy 👍🍻
@ChrisR2517
2 жыл бұрын
Hey Di, Stop bludging at home, he needs one of these so get back to working !
@dipowter4288
2 жыл бұрын
Hey Chris, He doesn’t need anymore machines I think he has enough. 😳
@ChrisR2517
2 жыл бұрын
@@dipowter4288 OOPS Sorry Maam he said you don't type... or clean... or work...
@ChrisR2517
2 жыл бұрын
@@dipowter4288 How are you both, getting back to normal yet ?
@olfoundryman8418
2 жыл бұрын
@@dipowter4288 You can never have enough machines, or bits to go on them...😊... Martin
@DCT_Aaron_Engineering
2 жыл бұрын
G’day Chris. Hope you’re doing well mate. Yes Dianne would kill if I bought this. This is our new VF2SS with trunnion attached to make it 5axis. This is one of six new CNC machines at my new job (TAFE). Cheers 🍻
Пікірлер: 39