Quick note: The final press will operate a lot faster than what we showed with this pre-production machine (did not have all final parts!).
@jawsmod
2 жыл бұрын
How does it compare to the RL 1100? It does look like it has flex in the tool head. Seriously considering this for brass prep and loading 223.
@joshuabaker5712
2 жыл бұрын
What parts specifically?
@daleblack0ify
2 жыл бұрын
How did you like the press I am looking to buy one. Also what does do you recommend for each cal. If you could do a video on dies per cal.
@fabriziofart
9 ай бұрын
I am enjoying the press and enjoy your channel . Well 2023 summer is past and no bullet feeder, do you have any information on this. I'm kind of annoyed because it was priced so correctly. I only load 9mm on this press and I do go through hundreds of round per week. I have emailed FA and no response. I can get around it but its wrong not to give accurate information on products that are featured on a item that you buy or are intending to purchase . I just finished a 30 + hour print on my 3D printer and I own a PM lathe and Mill + . But what a bout the other guys. Are they really going to go to double alpha and spend $550 bucks on a $175 feeder item? Frankfort needs to pull up there pants , there rear end is sticking out. Cant rely on them in this area. Shame because the press is no doubt a good value and works just fine. Tune it find your rhythm and there are no problems. Use some of that ultimate reloader juice and make an inquiry for us guys that follow your channel please. It would be great to know what's going on with FA. Lastly we all know Trump Won
@rvoykin
2 жыл бұрын
As long as they can actually keep it available unlike every other product launch since Covid, and it actually is around $1000 and it’s the quality they stayed this could be a game changer
@chrisgilbert2152
2 жыл бұрын
It will NOT be $1000!!!
@joshuabaker5712
2 жыл бұрын
@@chrisgilbert2152 bet it will be around $1200 which for a ok 10 station progressive press isn't bad.
@thelostboyscout1489
2 жыл бұрын
@@chrisgilbert2152 Nope, $1,099.99 per their website....
@jamesp8164
2 жыл бұрын
I’d pay it if the thing will seat primers to proper depth and doesn’t experience a stoppage 20% of the time like Hornady LnL does. I’ve yet to see a case feeder that was reliable and that itself didn’t cost as much as another press.
@zapman2100
2 жыл бұрын
this is gonna take over the market if it stays at the price they say this will blow all the others out of the water for that price.
@bhromig
2 жыл бұрын
my thoughts exactly especially if the quality is right up there with the others
@TacticalJackalope
2 жыл бұрын
It will never happen. Dillon is the undisputed king of progressives in the U.S. and they have the market share and reputation for customer service to match. I think Mr. Potterfield should try to get some reloading components to actually sell....first.
@joshuabaker5712
2 жыл бұрын
Not a chance. Dillon press looks way better and has HUGE product support already.
@aakoksal
2 жыл бұрын
It won't... Product will have lots of issues and FA will not satisfy customers like RCBS, Dillon. Hornady etc...
@matthewpeterson3329
2 жыл бұрын
@@TacticalJackalope Dillon might be the most renowned, but I don't agree that they are the undisputed king. I don't want to ruffle any fanboy feathers, that's not my intent, but I have owned and used every readily available progressive on the market, and every one of them has issues... usually at the priming stage. Dillon is no exception, though admittedly their priming stage is slightly less problematic than others, but it's not really better than the priming system on my Hornady or RCBS progressives. My Dillon very well built, just not the be all, end all. Especially for the price, which I will get back to. I honestly believe that (after loading well over half million cartridges using all major brands of progressive), if you take the priming stage out of the equation (hand prime), all brands are basically equal on speed and precision. For longevity, the Dillon, Hornady and RCBS are equals, with the LEE Loadmaster wearing out at around 50k rounds. Dillon DOES have superb customer service, with LEE being the next best. I am always impressed with LEE for innovation and customer service... too bad their stuff is all plastic. But it helps folks on a budget get into reloading. So... price. I tend to buy all the accoutrements for my presses. I could buy a new Tesla for what I have tied up in reloading equipment. But it happened over time (about 25 years) so it didn't sting like dropping $2500 on a new system, which is about what I have in my Dillon XL650, which I bought over 10 years ago and it cost more than the XL750 now. If I had to try something new that cost about as much, I like the looks of the Mark 7. For $3k, it looks like a very well built machine.
@titter3648
2 жыл бұрын
Looked like the head flexes a lot in the closeup shot of it working.
@kmil2010
2 жыл бұрын
Looks like a cool product. It would have been nice to see some close ups of each station that you talked about from the reloader’s perspective. Perhaps when you get yours?
@drobb4207
2 жыл бұрын
I've loaded on Dillon 1050's for years and this Engineer addressed every single bug I've had with my presses. I'm going to get one!!!
@joshuabaker5712
2 жыл бұрын
Like what? I love my RL1100 and this doesn't look like it has anything better then that. Shell plate wiggle is still there, tool head looks cheap, case feeder may work ok. I'll keep my money in THE USA.
@drobb4207
2 жыл бұрын
@@joshuabaker5712 Like drawing the primer back into the primer pocket. They have added an extra station to prevent that kaboom. If you load enough ammo it will happen. And yes I polish my de-priming pins.
@frankw7266
2 жыл бұрын
Some great concepts in engineering here, but "Made in China" a deal breaker these days... while it may not be totally unavoidable, I now try and stay with domestics products the best I can. My big Blue may have it's faults, but I've successfully loaded many hundreds of thousands of quality rounds on it, and it's made right here at home.
@D70340
2 жыл бұрын
Amen Frank! I wont buy FA products. When they break, they can`t seem to take care of the customer very well. Probably because all the REPAIR parts are sitting in CHINA!
@UncleMilty
2 жыл бұрын
I bet they don't have a domestic market for this in China!
@antpassalacqua
2 жыл бұрын
I agree, pretty much the only made in china product i own these days is my iphone. Why would I give an authoritarian communist government my money?
@TrentClark1
2 жыл бұрын
I broke a spring on my FA swager… they sent me a new one, no questions asked…
@jumpboots101
2 жыл бұрын
Agreed. Support American companies buy American.
@justinvandee2008
2 жыл бұрын
Should of done some powder charge tests to see how consistently it throws.
@williams9859
2 жыл бұрын
I’d like to add one of these next to my Dillon. I’d give it a year after release to see if there are any problems and any updates to those issues.
@kitanisthe
2 жыл бұрын
Been awaiting this press since Frankfort Arsenal announced its coming.. THANK YOU for this look at the machine
@happyhome41
2 жыл бұрын
Just saw this video, and excited - I checked the web site and as of early March - still showing as "Coming soon"
@harlantrent
2 жыл бұрын
I was in Columbia today myself. Cool that you were in my home state.
@curtiswest4272
2 жыл бұрын
I look forward to this press. Daddy needs an upgrade! Thanks again Gavin.
@Soulman6969
Жыл бұрын
Thank you both I learned something today. I really appreciate it at <a href="#" class="seekto" data-time="687">11:27</a>. You talked about rifle and pistol and the powder throw love it constantly learning thank you both
@SpudOutdoors
2 жыл бұрын
You was in my backyard!! Only 30 min from Columbia.
@ZZ-uf4zv
2 жыл бұрын
Let's not get ahead of ourselves fellas, it is a FA, dont start throwing shade at Dillon till you've actually had one and ran it for yourself. Looked like to me there was some torqueing of the tool head while they were running 223 and it looks like it's got a hanging point on the upstroke as well. May have something to do with the amount of leverage they have in the cam of the press, maybe not.. This could still end up being a nice press after they get the bugs worked out..
@mikethebike67
2 жыл бұрын
I saw that tool head flexing also. I wouldn't be the first to buy one.
@CorwinBos
2 жыл бұрын
Upstroke hang up was probably the expander ball coming back thru. I didn't see any weird torquing on the tool head. I'm interested, but I want to see for info. I wanted the RCBS 7 station to not suck. That didn't happen, so I didn't buy one.
@ZZ-uf4zv
2 жыл бұрын
@@CorwinBos I know what your saying about the expander ball, but on presses with a good cam you don't notice that when they are being run, it's a smooth operation. It's not like I seen Gavin do it once, every time he pulled the handle he had that same hesitation... This may very well turn out to be a good press, time will be the deciding factor..
@CorwinBos
2 жыл бұрын
@@ZZ-uf4zv Yup! Time will tell. I would really like to see a press that can actually compete with a 1050 at a reasonable price.
@ZZ-uf4zv
2 жыл бұрын
@@CorwinBos Agree 100% as I have a RL1100 on the way...
@o2wow
2 жыл бұрын
Interesting combination of features. I am concerned with the slight rocking movement of the toolhead loading 9mm at <a href="#" class="seekto" data-time="1202">20:02</a> in the video.
@jawsmod
2 жыл бұрын
You are right. The tool head rocks all over the place in the video.
@joshuabaker5712
2 жыл бұрын
My thoughts exaclty.
@civhonbmm3
2 жыл бұрын
This is amazing and it’s nice to know that things are always changing and always something well I hope when this comes out You can get components in order to reload
@joeybagodonuts1008
2 жыл бұрын
very impressive machine, the safety systems and features seem very well thought out, great sneak peek
@jasonmpd2946
2 жыл бұрын
As long as the people who worked on the electronic powder dispenser didn't touch this program, it might be a good product.
@PatriotPaulUSA
2 жыл бұрын
Wow , That is an incredible press and value for $1200.00 ish. This will make a 10 station progressive, a easily attainable machine, for the average reloader. Nice job showing all the parts and how it works Gavin! This is the 1st Frankford Arsenal press I would buy. I wish they would fix the 3 major problems with their single stage press, but they don't seem to be able to get the Chinese manufacturer to do that, or they don't care. Regardless, I would wait a year to see what problems develop with this and see if they bother to fix them, I am sorry to say.
@jimclark6883
2 жыл бұрын
You are so lucky Gavin getting to try & test out new equipment, but I see why the manufacturers come to introduce their new products on your channel first. This press looks robust but might be a little difficult to adjust until you get past the learning curve. I think it will do well depending on the street price it commands when it hits the market in 2022. I look forward to seeing one in person and getting my hands on it. To me the Dillon Precision machines look like they have a smoother crank stroke than the Frankford FX-10 does.
@Oldhogleg
2 жыл бұрын
That's a lot of value for the money with the quality of design and materials that was put into it 👌👍. I've always been a single stage press guy since the 90's, now I'm seriously considering going progressive with that press system. Even I noticed how well the leverage geometry was done by the ease of operation before you even mentioned it.
@squirrelwesson3969
2 жыл бұрын
Totally awesome!!! Any chance that this press will end up being included on the Progressive Press Shootout when ever that video drops???😁😁😁
@JerrBearTactical
2 жыл бұрын
Yep been waiting for this ... I will be buying this press when released 😉👍 ... thanks Gavin and FA for sharing this video 👊👍
@andrewithtaylora9666
Жыл бұрын
This press looks so well thought out it's amazing. Has room to load and have enough stations for senors and powder check dies. May be the one i finally get when I have the cash saved.
@christinekukel6896
2 жыл бұрын
Nicely done, as usual Gavin. Looks like an impressive product, but I see that it is made in China. That is a deal breaker for me.
@capteod
2 жыл бұрын
It looks like the post for the bullet feeder is a visual obstruction to bullet feeding. I noticed that you had to look around the post when you were loading the bullet in 9mm. I own a Dillion RL1050 and the posts is not obstructing my view of the bullet loading station. The 10 stations is a great feature and I like the machine and am thinking of getting one once they come out and a few pioneers have run them for while. "You can always tell the PIONEERs by the arrows in their back."
@BlackDotPatrick
2 жыл бұрын
What is causing the press to hesitate on the up stroke of the handle? There's a spot where it's very obviously hesitating and requiring much more force to complete the stroke.
@idleonlooker1078
2 жыл бұрын
I use the closed bolt method, but I also paint the projectile to see the marks where the lands are touching on the bullet. Then I set up my seating die using this patterned cartridge, and then give the die an additional 1/8th of a turn to seat the bullet just that little bit deeper to just before touching the lands.
@Gunman1628
2 жыл бұрын
looks like a nice machine. only reservations i have is product support. with a machine like this i want the company to be around and support it for at least 10 years. i don't want to buy this and 5 years later something breaks and i can't get parts for it
@louisleoncini1033
2 жыл бұрын
Now all we need are PRIMERS.
@davidurfer7632
2 жыл бұрын
It almost seems like there is too much space between the shell plate and the tool head. When both Gavin and the FA guy run the press, they seem to be stretching to cycle the handle to the bottom.
@ZhuJo99
2 жыл бұрын
Exactly. It’s almost 180 degree. So problematic to operate this either sitting or standing. And I’m not sure if they were sizing brass in one step or what, as it seems like it stucked every time for a while.
@jd_flick
2 жыл бұрын
Nice to see some competition with Dillon
@pstewart5443
2 жыл бұрын
This like a processing press and a reloader all in one. Bringing the heat FA.
@jeffw4942
2 жыл бұрын
I really like the shell plate bearing. It looks like it runs real smooth. No powder jumping out of the case. As you index. Nice
@TMS5100
2 жыл бұрын
@20:05 looks like shellplate still snaps
@winnmahuron6314
2 жыл бұрын
Really liked this video! I think this might be my new pistol press! The price is good for me and it looked very smooth in operation.
@jscottmarcum9
2 жыл бұрын
When will someone make a loader where the it’s only a 90degreee movement with the arm. Not closer to 180…
@joshuabaker5712
2 жыл бұрын
Not going to happen. Unless someone makes a dedicated pistol only press. The tool head or shell plate needs to have enough stoke to load common rifle rounds.
@weeniewawa
2 жыл бұрын
I imagine they are planning on using a bullet feeder but it would be nice for the bullet tray to be mounted up closer to where they would be loaded. I am sure this is still a pre production unit. Seems like a great press can’t wait for the release. Thanks for the demo
@MrJ69davis
2 жыл бұрын
Well glad I waited to get a ten station press this is going to save alot of money.
@Dubbin1
2 жыл бұрын
Sure is a lot of flex in that tool head.
@gollygeewizard
2 жыл бұрын
Looking forward for your full unboxing/setup, review and caliber change videos with better b rolls and hopefully much better lighting.
@marcelo8038
2 жыл бұрын
At Frankford Arsenal website the MSRP is about 1.099..... it is a great price point.... can´t wait for them to be available.
@pcampbell55
2 жыл бұрын
Very interesting! It is a very nice press. One minor negative may be having to reach around the case feeder stand to manually place the bullet on the cartridge.
@somedayzo6
2 жыл бұрын
Where will it be manufactured?
@Farpointhold
Жыл бұрын
That really help me decide. I expect to like it
@markr6754
2 жыл бұрын
Sad to see it slip into 2022, but that gives me a few more months to save up…and convince the Mrs that I really DO need a 4th press. Looks like I’ll need to mod my reloading bench to allow for a puka for spent primers.
@5jump
2 жыл бұрын
I hate pukas. I don’t like making more holes in my butcher block
@brianstevens4392
2 жыл бұрын
My Mark 7 Apex 10 for the win! Yeah... it’s $3k and it’s worth every penny! Made in America, Lyman in Connecticut, and Mark 7 in Florida. Can get a call back from customer support in the same day if needed.
@mjcotton7
2 жыл бұрын
Been waiting on this review from you!
@rcknroll58
2 жыл бұрын
This is an awesome new press and it couldn't have been presented by a better guy. Michael is a awesome shooter and a better dude.
@martymac63
2 жыл бұрын
Great Press but without primers what good is it. Hopefully, they will start shipping us products so we could use this monster.
@toons5233
2 жыл бұрын
that will be a nice price point like to see more of this one
@mario3804
2 жыл бұрын
I feel this is a good value for the money my concern is availability once it comes out Frankford needs to maintain this machine and dies in stock if not it’s a three year waste of time. Too many options out there to wait for a company back flow which is my biggest issue with Dillon been waiting for two sets of dies for 8 months ridiculous.
@jimpolicke7639
2 жыл бұрын
There is no way I would spend that much money on any Frankford product. There's always the suspense of waiting to find where FA cheaped out on a part or the design. Like those tiny short screws on the M-Press that rip out if you pull down too hard, or the sloppy fit on the shell holder so the knob spins instead of turning the holder. And then there's the obnoxious customer service: I had to fight tooth & nail to get them to send me replacement shell holders - he wanted me to pay to ship them the whole press!
@PatriotPaulUSA
2 жыл бұрын
That is pretty sad. That press could be sooo much better but they refuse to fix the crappy cast shellholders, the too short screws, and it sucks that some dies won't fit in it. It just shows how much better Forster is as a USA company they don't have ANY of those problems with theirs. I would definately wait a year or 2 to buy one of these to see what problems develop.
@jimpolicke7639
2 жыл бұрын
@@PatriotPaulUSA A couple welds where the knob is pressed into the shell holder would fix one problem, and deeper holes to take thicker screws would fix the other. And an attitude adjustment in customer service would be great.
@roul3688
2 жыл бұрын
I’m sure I haven’t loaded as much as some, but I really haven’t encountered most of the problems mentioned in this video. I feel this press is solving a problem that doesn’t exist
@joshuabaker5712
2 жыл бұрын
So as someone who ones and uses a Dillon RL1100 I have a few observations. Tool head flex and it looks like they took a cast piece, cut holes in it and welded inserts in for the die threading? Shell plate wiggles a lot. Loading 9 major will not be smooth with it at all. Why no video of the case feeder working? We have all seen the disaster that Hornaday had with theirs. Lack of ability to just pull a case at the priming station with out taking something off. A couple things I do like is the primer feed setup where you can just pull it all off without removing any primers. 10 stations is always nice. But for me I think it's a no.
@the1bulldurham
2 жыл бұрын
I’ll buy one when they come out. But, don’t think the ten stations are being efficiently used. With ten stations loading pistol I want to powder check, bullet drop, bullet seat, and crimp all in separate stations. Couldn’t tell from the video what was going on there, definitively. Why is the 1st station not also a de-prime and size as well as a case feed? All this will probably make sense once I get my hands on one. Have a lot of FA reloading tools. Looking forward to this one.
@JamesSmullins
2 жыл бұрын
I think most will decap before washing brass specially those like me who use stainless media because it will be in the primers getting tossed.
@StealthJackson12B
2 жыл бұрын
This has everything but WIfI....and can it Smoke a Brisket? Eitherway, I want one.
@mikemcallister9091
2 жыл бұрын
Funny all the value added details that were mention will overcome all the issues I have with my Hornady LNL progressive that I hate so much... Yup I am getting one....
@Palehorae20
2 жыл бұрын
If this thing works as advertised it's definitely going to be a game changer if I were Dylan precision I would be worried
@jdavis2609
2 жыл бұрын
.....Dillon
@Palehorae20
2 жыл бұрын
Ja here hammer Nazi I typically use voice to text and I'm too lazy to go back and correct it just get over it
@daltexmex
2 жыл бұрын
They said beginning of 2022 now they are saying end of 2022. I don’t even think it will be at the end of this year. I got that vibe from talking to one of their guys at their booth at Shot Show last week. I hope I am wrong.
@shirolee
2 жыл бұрын
Dang, I was looking at the Apex 10, but with the features and price point, the FX-10 looks like the winner.
@someguy5543
2 жыл бұрын
Looks great. How complicated is the set up for the average person. That seems to be the biggest problem with everyones products
@duggydo
2 жыл бұрын
Frankford makes some good stuff.
@davidunderwood3605
2 жыл бұрын
I really like this press. Even more after stating that there will be both pistol and rifle bullet feeders. One note I'd like to throw in is I would really like to see a primer pocket cleaner built in to the second station. If you've ever had a dirty pocket that caused a pass thru gass between primer and pocket wall enough to scorch and etch your bolt head you will understand why I'm saying this. It just doesn't happen very often ( 1 in a billion ) maybe, (1 in a million )but once is enough. I speak from experience. This is why I never de-prime /prime on press in one operation.
@cheryldbackstrom357
2 жыл бұрын
Didn't know I wanted one until I saw this .would be interested in knowing more about the powder system would it allow for loads to weighing
@donbarile8916
2 жыл бұрын
So... a grand or so. How about calibur conversions? What besides the shell plate, powder components, case feed parts? If you load 9, 38, 40, 45, 223 and 6.5 creedmoor..... what are we looking at? Does it come with a lifetime no BS warranty? Asking for a friend....
@mrdoitall511
2 жыл бұрын
This video led me to a couple questions. First, does the projected price come with the a caliber conversion? Also, what is the cost of additional caliber conversions? I am extremely interested in this product as I’m sure many will be. I look forward to more information on this system. Thank you for sharing this!!
@travispowell2471
2 жыл бұрын
Wow. Well thought out machine. I want one.
@rhager1270
2 жыл бұрын
I want one for sure
@bsimmons00
2 жыл бұрын
Very cool concept but those shell plates can't be cheap. It will also be interesting if you can buy extra tool heads so you could have one for each caliber already setup and ready for common ammo you reload in large quantities. I could see comp shooters having one setup for 9mm and 223 for their favorite loads and just swap out.
@drubradley8821
2 жыл бұрын
WOW... I like it.. The change over looks strange, but, I suppose, once you are used to doing it, just another normal day in loading. I would imagine they offer shelving units or racking that holds pre-set heads so one doesn't need to lay them on their sides.. Really nice looking units.
@valleyhomeinspectors3839
2 жыл бұрын
We're is it made?
@frankw7266
2 жыл бұрын
Made in china... it's in their Q&A product section on the web site.
@TMS5100
2 жыл бұрын
@<a href="#" class="seekto" data-time="1205">20:05</a> looks like shellplate snapping still occurs.
@user-hg3mu3mg2y
2 жыл бұрын
When is this thing coming out?
@PastaLaVista.
2 жыл бұрын
If prices ever get back to normal I’m still thinking a $450 Hornady lnlap is the way to go. If they stripped this down to the basics and cut the price it would be a harder choice
@billy19461
2 жыл бұрын
I will be “patiently “waiting. But I have got to find primers.
@donbarile8916
2 жыл бұрын
oh ya, primers...... the thing that keeps most people from reloading.... details. if they came up with a primer reloading press, I would pick one up today, but as it is.... I'll suffer through with my 650 and 750.
@chrisgilbert2152
2 жыл бұрын
God Bless AMERICA!! FA, the Harbor Freight of reloading!!
@TMS5100
2 жыл бұрын
accurate analogy. a lot of cheap junk but a few gems. i love the vibra-prime.
@BobBob-il2ku
2 жыл бұрын
@@TMS5100 My vibraprime just shit the bed 😢
@arjones2330
2 жыл бұрын
Lookout dillon precision!
@D70340
2 жыл бұрын
Dillon has nothing to worry about. People who buy FA products already know their customer service and part availability is just horrible.
@arjones2330
2 жыл бұрын
Just being funny i rock a super 1050 !
@westsailfortytwo1950
2 жыл бұрын
@@D70340 Dillon will if they take 11 months or more to fill orders (Jan '20)>
@keimolantio
2 жыл бұрын
Why does the plate twists/flexes so much at <a href="#" class="seekto" data-time="38">0:38</a>?
@JustAverageJeff
2 жыл бұрын
I'm pretty new to firearms and this makes reloading looks so much less intimidating, would love to get one of these one day.
@googleboy7
2 жыл бұрын
Hi Gavin, looks like a really nice press! I have north of ten grand in reloading equipment. But it's all gathering dust because I can't find any primers. I've tried the "notify me" route but they sell out before I can place an order. Any idea when the primer supply will return or where I might find them? Good luck to Frankford and thank you very much for all of the great videos! Shalom/gw
@marflo6913
2 жыл бұрын
Try zincpoint, a little expensive but better than nothing.
@RobinP556
2 жыл бұрын
Has anyone ever made a progressive press that has case and bullet feeders that load from a lower position or can be removed for loading? I’m a paraplegic and just can’t reach high places, but I shoot a lot and use both a Hornady and a Dillon press, just not with case or bullet feeders.
@lfeco
2 жыл бұрын
Glocks, I knew a guy who had his two Dillons mounted on a hinged plate. When he needed to load brass or bullets into the feeders he would loosen a wingnut on the back of the hinged plate, tilt the whole press forward, load the hoppers then tilt back and tighten the wingnut.
@RobinP556
2 жыл бұрын
@@lfeco Good idea! I’ll have to give that a try.
@jakethejackalope3473
2 жыл бұрын
Well fellow reloaders. We gave the Mark 7 Press and all of its bells and whistles nearly a year. What a fiasco that press turned out to be. Poor machine quality, customer service and parts availability. Could write a book on all of the issues. So back to our good old Red LEE presses and equipment and dust off our Dillon 750XL and the Venerable Dillon 1100. Still waiting on powder, primers and bullets to arrive by mid December from back East. Picked up some new 10 round, 50 round and 100 round SAAMI QC Blocks. Plenty of die sets for all.. Spare parts But, etc. But plenty of components to finish fine tuning and begin to punch ammo out. So stay tuned for a new batch of reloading videos and pictures in 2022. Happy Holidays Jake the Jackalope 112721
@wardo17
2 жыл бұрын
Looks like an awesome press.
@kb9oak749
Жыл бұрын
It would cost ~$900 to convert my LNL-AP to ammo factory status. With the X10, it's only a few hundred more. Nice! Does it come with one set of dies? I don't see dies on the website.🙁
@peteregger7928
2 жыл бұрын
The amount of throw on that lever looks like it's at least 160 degrees? Don't know if it's just the camera angle but that is a lot of handle movement to cycle that press?
@lfeco
2 жыл бұрын
When I saw that I'm thinking "I'd be cutting some off that handle."
@MikeStJohn-du5ue
2 жыл бұрын
I want one! I saw another review on this a few weeks back and it looks like it will do to replace a Dillon 650 on my bench.
@jcoolhand5
2 жыл бұрын
Seems like you were having to look around the brass feed tube to set pistol bullets on the seating station. Just an initial impression watching you load the 9mm. Did that seem ergonomic? I'm envisioning twisting to look around that brass feed system for thousands of rounds.
@donbarile8916
2 жыл бұрын
lol. two tylenol should handle the stiff neck.
@jcoolhand5
2 жыл бұрын
@@donbarile8916 Thanks... That's helpful Don.
@nebelwerfer199
2 жыл бұрын
Will it be made by the people who eat 🦇?
@frankw7266
2 жыл бұрын
LMFAO!! Yes, made in china.
@FXSHT
2 жыл бұрын
we want to see all about the apex10 and the autodrive!!!
@benbowditch9265
2 жыл бұрын
Any more info or brief explanation of the proprietary Pistol "Bullet Shovel" would be nice :) I'm imagining something along the lines of.. No big bullet collator necessary, just grab a hand full of pistol bullets and throw them in a "shovel" style hopper? I also assume it comes with both small and large swage rods? I'm pretty darn excited for this! I saved up for a Mark7, but since you first broke the news of this I'm holding off for now :) Auto-Drive on a 10 Station would be rad!
@nvkulk
2 жыл бұрын
Completion is a good thing!
@echosreloadingchamber7306
2 жыл бұрын
Where is this piece of equipment made? I have owned various different Frankford Arsenal reloading tools, and getting service for them is next to Impossible. I've tried to get replacement cutting heads for two of their newer style trimmers. I was actually told by one of their phone Personnel to purchase an RCBS cutting head and that it will fit. On the other trimmer I couldn't get anything to replace the cutting head on it. I think I would rather spend more money and buy big blue, and at least I can get parts and service done without a problem. Just my honesty about a company I have dealt with many times before. Echo
@chrisgilbert2152
2 жыл бұрын
Communist CHINA!!
@fsarfino
2 жыл бұрын
We're gonna need a progressive primer re-loader
@007ianmclaren
2 жыл бұрын
I noticed that on the handle upstroke the press looked a little sticky. Is it the same old Dillon problem when the case sticks in the powder throw on the way out? If this press works at the price it will be a big hit
@MsChristianskogland
2 жыл бұрын
Yes 😁
@Trustthanos
2 жыл бұрын
Not a fan of the travel for the handle, I've had to make gearing on a few of these 10 station reloaders to cut the travel down by at. Least half. There's no need for 180 degrees of throw, it inefficient.
@JeffinTD
2 жыл бұрын
It’s like someone with experience operating the big brand progressive took note of everything that could be improved…
@why-be-normal7014
2 жыл бұрын
So is there a preorder date possibly? And what dies do u need to use with this machine and will be able to purchase everything from them to set the whole machine up and Also have a KZitem page on setting everything up step by step?
Пікірлер: 309