Looking at same set up, would love to see an install video. Thanks for posting.
@danielandersson1053
3 жыл бұрын
I just ordered myself a set for my incoming FXBBS 2021. Thank you for the discount code. Best Regards Daniel from Sweden
@TonysGarage
3 жыл бұрын
👊👊👊
@Idahoup
Жыл бұрын
Looking to start a Street Bob video build series in the near future. Thanks to this video, I think I just found my risers. Thanks for brining OG Moto to my attention.
@saleenguy25
Жыл бұрын
With the 8.5 did you have to extend wires and cables?
@larsin...1348
Жыл бұрын
What been happening Tony , Haven't heard from you in While , Hope all... well
@barrybarnes96 all good guys. Been involved in The Five Dirty Bikers Podcast. Which takes a lot of my free time. You all can check us out we are available on all podcast sites and drop new ones every Monday.
@TonysGarage
5 ай бұрын
All good guys thanks for asking. I have been doing The Five Dirty Bikers Podcast. Which takes up most of my free time. Check us out we drop a new podcast every Monday. It's a lot of fun and not for kids😂🤣.
@Operator17Gaming
3 жыл бұрын
Hey Tony, more looks of the bike from a bit further away would be great, cheers!
@TonysGarage
3 жыл бұрын
👊👊. I got you
@justfine77777
Жыл бұрын
This is an awesome video. This is exactly what I was looking for. There are very few options for keeping things this clean looking. Thanks! 🤘🏽
@dextersuarez9948
2 жыл бұрын
I’ve got a Tbar setup at about 12.5 inches of height on my FXLRS. I’m 5’6 and the height is fine, however I would love to have some pullback, stronger considering these risers.
@joemckibben5729
10 сағат бұрын
Just get the pullback plate from either thrashin supply, kraus, or og moto. It'll be cheaper and easier.
@FarmerTheOG
2 жыл бұрын
How tall overall?
@TonysGarage
2 жыл бұрын
About 12 inches
@kidmoto22
3 жыл бұрын
God damn those look badass! The quality is impressive!
@ProfessionalMonkey
3 жыл бұрын
That bike's too pretty for you...
@TonysGarage
3 жыл бұрын
It is isn’t it🤣😂
@ecmlperez
11 ай бұрын
Promo code expire?
@VeteranBiker
3 жыл бұрын
Love the channel Tony been following your lead for a while! Veteran Biker here
@TonysGarage
3 жыл бұрын
Thanks man👊👊. Really appreciate that thanks for watching.
@VeteranBiker
3 жыл бұрын
@@TonysGarage appreciate any feedback you may have for my channel
@darrelllaver9630
3 жыл бұрын
i bought these a few months ago. they are the best!!!!!!!! Great choice!!!!! OG all the way!!!! I have the mini floorboards coming this monday.
@TonysGarage
3 жыл бұрын
Quality stuff👊👊
@ozzystng285
3 жыл бұрын
did you have to change the cables?
@TonysGarage
2 жыл бұрын
Nope, stock worked just fine
@anwardfyith5955
2 жыл бұрын
Hey nice bike ! What wind screen do you got on ?
@TonysGarage
2 жыл бұрын
Memphis shades road warrior
@danielkingsley4858
Жыл бұрын
Do you think you would have enough slack to go to the 10” riser ? I’ve got the same bike looking to do the 10”
@TonysGarage
Жыл бұрын
I think so except for the speedometer
@danielkingsley4858
Жыл бұрын
@@TonysGarageI’ll be getting the extention cluster cable.
@danielkingsley4858
Жыл бұрын
@@TonysGaragehow tall are you ? I went with the same setup. 8.5 og risers. And the taller v twin bars. You have the taller rise bars or the low ones ?
@MikeQuinn-u7y
Жыл бұрын
Great review! I have all the parts and ready to install on my 2020 street bob. Did you do an install video? Do you need to de-pin and of the wiring? The Moto bars look like they will pass right through. Thanks! Mike.
@nystar01
2 жыл бұрын
Just ordered from OG Garage Moto. Thank you for the video and the discount code.
@TonysGarage
2 жыл бұрын
Great stuff👊👊👊👊
@nystar01
2 жыл бұрын
@@TonysGarage Tony, what riser bushing do you have?
@prashantkudrigi4527
2 жыл бұрын
Tony- awesome content! I just received my OG risers and ODI handlebars and I’m about to install. Question: Do I need to disconnect the battery during installation?
@prashantkudrigi4527
2 жыл бұрын
Also, did you have to Depin the wires to take them through the handlebar?
@TonysGarage
2 жыл бұрын
I did have to Depin.
@prashantkudrigi4527
2 жыл бұрын
Thanks for your quick response!
@leosickboy
9 ай бұрын
nice! is the discount code still active? I'm ordering pretty soon...
@martyportersr7008
3 жыл бұрын
Hey Tony we need to meet up for a ride. I am open most of the time so just let me know. Total miles is 81 miles from Milan Indiana to Louisville. About Half way is Madison Indiana. Just let me know what you think?
@johnnelson903
2 жыл бұрын
hi can you send me parts number..for all the parts in lreland love your set up going to go with your setup
@biasedangelo830
2 жыл бұрын
can you take a few pics of your bike with these bars and risers without that bag in the way? from a few different angles ...thank you sir
@bernardlesperance742
2 жыл бұрын
Hi Tony. I haven't seen a new video from you in nearly a year. Everything OK ?
@JC-iq5td
Жыл бұрын
How tall are you sir?
@brenex-ym2id
4 ай бұрын
How tall are you sir?
@TonysGarage
4 ай бұрын
5'6
@ronnierivas5478
2 жыл бұрын
Odi bars ?
@TonysGarage
2 жыл бұрын
Yes sir
@ronnierivas5478
2 жыл бұрын
@@TonysGarage just finished mine and they came out really nice
@dallashardy3598
Жыл бұрын
This was awesome video there’s not a lot on streetbobs.
@Junior-lf5qn
2 жыл бұрын
Wish they had them without the pull back
@jimbeam4111
3 жыл бұрын
Resembles Thrashin Supply parts
@andersgronqvist2634
2 жыл бұрын
Can u please give me and adress to order from?
@erickorozco8038
2 жыл бұрын
Just bought these risers. What size is the moto bars?
@free2rhyme14
11 ай бұрын
How you doing Tony!
@mikefrancais
3 жыл бұрын
Hey neighbor, you’re gonna have a totally new bike before this is over!
@ozzystng285
2 жыл бұрын
what is the pull seize
@Elcubantaco
Жыл бұрын
Tony how you been
@ronnierivas5478
2 жыл бұрын
How tall are you ?
@Setzerpendence
3 жыл бұрын
those bars look pretty cool. Nice review fanboy LMAO
@TonysGarage
3 жыл бұрын
🤣😂
@WetBananaMike
3 жыл бұрын
T bars are for teabagger baggers. Good video Mr. Cox. 🤣
@TonysGarage
3 жыл бұрын
That are risers and moto bars not T bars🤣😂. It’s just a shame their not on a Dyna.
@ozzystng285
2 жыл бұрын
looks great
@darrelllaver9630
3 жыл бұрын
Oh Canada!!!!!!!
@YMH420s
3 жыл бұрын
Awesome brother.
@bernardlesperance742
3 жыл бұрын
Looks great ! Are the handlebars from Original Garage Moto or elsewhere? If elsewhere, where and which ones? Thanks Tony.
@TonysGarage
3 жыл бұрын
They are ODI but original garage carries them.
@Wild-Wisdom
3 жыл бұрын
They look great 👍🏻
@JJ_Pug
3 жыл бұрын
Found your channel from 5 dirty bikers love all you guys do!
@TonysGarage
3 жыл бұрын
Thanks man👊👊👊
@timmyyo3002
3 жыл бұрын
Hey mate what hight are you ?
@TonysGarage
3 жыл бұрын
5’6
@eduardomontes2749
3 жыл бұрын
Any more videos coming soon?
@TonysGarage
2 жыл бұрын
Yes, I have a bunch in the pipeline
@milmex317th
3 жыл бұрын
Are those tears in your eyes
@TonysGarage
3 жыл бұрын
Man, thought I edited that’s out😂🤣
@David129911
2 жыл бұрын
How tall are you?
@TonysGarage
2 жыл бұрын
5’6
@jamesharold4983
3 жыл бұрын
Wish I could have seen more of the bars while in use riding.
@TonysGarage
3 жыл бұрын
It’s coming soon
@gasmann6746
3 жыл бұрын
They look so good perfect fit 👍🏻🇦🇺
@TonysGarage
3 жыл бұрын
👊👊
@Daniellopez-yy2rk
3 жыл бұрын
What bushings did you use
@TonysGarage
3 жыл бұрын
Arlen Ness
@primojoe6733
3 жыл бұрын
What was the stock high ?
@TonysGarage
3 жыл бұрын
About an inch lower 12 inches I think.
@andrewmartinez2810
3 жыл бұрын
What was the overall height ? Thanks !
@TonysGarage
3 жыл бұрын
12 inches
@andrewmartinez2810
3 жыл бұрын
@@TonysGarage Awesome . Thank you .
@andrewgedling5554
3 жыл бұрын
What length did you go with for the speedo extension wire
@TonysGarage
3 жыл бұрын
I’m thinking it a 6 inches over stock.
@andrewgedling5554
3 жыл бұрын
Okay thanks I was trying get an idea bc I might go with the 10.5 riser so I might go with the 9 inches over stock to be safe
@turtle19dad
3 жыл бұрын
Love the bars, risers and display where you put it. How tall are you? And did you do the install yourself? Video?
@TonysGarage
3 жыл бұрын
I did do the install. It was pretty straight forward. Unfortunately I didn’t film it.
@turtle19dad
3 жыл бұрын
@@TonysGarage How tall are you?
@TonysGarage
3 жыл бұрын
5’6
@albodoin
2 жыл бұрын
Been few months since you installed these, are they still confortable?
@TonysGarage
2 жыл бұрын
Best setup I have ever used.
@Xboxguy666
3 жыл бұрын
Did you end up pairing the OG moto bars with the 8.5 riser or did you find other moto bars to pair with the riser? Thanks
@TonysGarage
3 жыл бұрын
ODI bars with the 8.5 riser
@Xboxguy666
3 жыл бұрын
@@TonysGarage much appreciated 🤙 Will you be making a follow up review video any time soon?
@amazonledlights
3 жыл бұрын
Hello, I am the manufacturer of LED headlights and like your video. I really want to have a cooperation with you. I have sent you the message via Instagram. Looking forward to your reply.
@TonysGarage
3 жыл бұрын
I currently work with Custom Dynamics, but would definitely take a look at what you have to offer.
@amazonledlights
3 жыл бұрын
@@TonysGarage I have send the message to your Instagram. Do I need to send it to your email?
@TonysGarage
3 жыл бұрын
Please not seeing it in Instagram
@amazonledlights
3 жыл бұрын
@@TonysGarage please check it again. Sent message via instagram again just now.
Пікірлер: 111