No cones, No test lift , No Stop button when moving, No pads under stabilizers & no concern for H&S
@christophermunton9623
7 жыл бұрын
Shocking! If I set up and operated my hiab the way he did I would be unemployed.
@tad2ik
7 жыл бұрын
four years on still in one employer ;-(
@scottmiller4741
5 жыл бұрын
You've been lucky so far then. Should have at least 1 leg deployed. Standards for driver loaders are dropping.
@Antisoc1alok
4 жыл бұрын
IKR and whats with the height he is moving the bricks at😱. Always keep the load as low as poss in the event of a liad slipping even if its more inputs on the controls. wow
@stun5700
Жыл бұрын
Chris bore off
@stevejohnson7611
5 жыл бұрын
Don't walk around while operating remote control, school boy error
@tad2ik
5 жыл бұрын
I would say don't stand under the load being lifted. Thanks for advice. 6 years working on hiab never had injury. Touch wood
@rustysmith3565
10 жыл бұрын
neat drop mate, well done.
@putty2812
10 жыл бұрын
legs in and no pads underneath them, wont be long until that trucks on its side
@tad2ik
10 жыл бұрын
dont worry. I know my truck.
@adanthedriver1982
10 жыл бұрын
Those pallets aren't heavy,that's why
@putty2812
10 жыл бұрын
Staicu Razvan those pallets of bricks weigh around 1300kg more than enough to role that truck i do this as a job and have done for many years and this is not a safe unload
@jmr-marc
3 жыл бұрын
@@tad2ik are you so sure ? a pallet of bricks is not so light it is never a good reason especially when there is space !
@tad2ik
3 жыл бұрын
@@jmr-marc afer couple of years on hiab I use the pads on tarmac most of the times especially on pavement. Had in the past cases that outrigger sunk in some thin tarmac. No dangerous situations however
@BobMc87
9 жыл бұрын
Looked good to me. How do you secure these bricks when traveling? Is the side up enough?
@checkmybitz6541
7 жыл бұрын
Bob no the side being up is definately not enough!!!!
@jmr-marc
3 жыл бұрын
pvc angles and strapping on each pallet as required by the highway code
@damiankowalik8612
10 жыл бұрын
nice one
@clasyfiks
3 жыл бұрын
Never walk and operate
@Saunis
9 жыл бұрын
How much you can put weight on that grabber?
@richlee509
5 ай бұрын
All cranes are different. Normally for this type of crane 1 to 1.5 tonne
@yidarmy0
10 жыл бұрын
got to be a fucking polka!!
@stevekunoor
7 жыл бұрын
wouldn't stand so close to the grab , it'll hurt if it smacks ya.
@user-mj6cr3kl2h
10 жыл бұрын
you dont connect the bricks to the grab safely and strong, and you operate it fast and you dont pay much attention for your BAD operating!!!
@funguy6665
2 жыл бұрын
FAIL BIG FAIL MOVING WHILE OPERATING CRANE AND NOT ISOLATING REMOTE !!!!
Пікірлер: 30