Hey man you really saved my ass with this video. Looked at the kit and wondered "Wtf is this?", after seeing this video I know now what those parts are to and how to do it myself. You do a lot better job than 95% of people who do this explanation videos. Thanks a lot again!
@Michael-lx7px
Жыл бұрын
Good job, I put lifts on all my ATVs. One thing which makes it easier to work on them is to wash them after you get them all muddy, then you don't get as dirty working on them!
@okrgat
3 жыл бұрын
Thanks for the video. You did a great job of explaining how you went about installing the high lifter.
@jacobweber5471
3 жыл бұрын
Thank you!
@mikesims7931
3 жыл бұрын
Good job explaining the process you done a lot better than most if the older guys on here!! Good to see a young man do stuff for himself without help way to go.
@randytrivitt6539
2 жыл бұрын
Really like what you're doing!! DIY young man!! 💯❤️🤍💙🇺🇲🙌👏👏🥳
@Jtnolan09
2 жыл бұрын
I watched this to see how the quality of the kit was and now I know how to install it! thanks!
@dolphwegz2321
3 жыл бұрын
Great video young man. I reccomend one thing though lol.. wash it first
@abbtt7809
3 жыл бұрын
That thang is dirty 😂. But great video
@darryldoesit966
Жыл бұрын
that was gonna be my only real comment too...
@MOUSEBOWEN
Жыл бұрын
Super awesome video thank you so much for sharing
@austingreer2814
3 жыл бұрын
In the front of the four wheeler your suppose to put it at the top of the shock
@silvestreortiz4557
2 жыл бұрын
It goes on the top because I want to lift my four wheeler two
@jasonhoward1867
3 жыл бұрын
Good job! Nice lift kit.
@jcsnipes4495
3 жыл бұрын
Yes
@daviddowling3583
2 ай бұрын
I would grind a half inch of the bracket imho😊
@jakebsowders357
3 жыл бұрын
Those front axles have a real high pitch , I’d say it will be hard to keep axle boots on it
@jacobweber5471
3 жыл бұрын
I haven’t had a problem yet.
@qvvtg7792
3 жыл бұрын
This video was definitely worth watching
@beckymartin732
3 жыл бұрын
Put a wheel spacer so it doesn’t rub up against the tire in the front
@jacobweber5471
3 жыл бұрын
I did just didn’t film it!
@levimcqueen6259
3 жыл бұрын
Good video I was wondering if it was a decent lift kit and if it was to hard but I’m gonna get it now
@scottlocklear2062
4 жыл бұрын
While you had it apart you should have adjusted you shocks. Your shocks are adjustable to also give u more lift yours were set on stock, watch a video on how to adjust shocks its easy.
@jacobweber5471
4 жыл бұрын
Scott Locklear I didn’t want to mess with the shocks because with the lift installed the suspension is way more stiffer than stock.
@TBrownRecords
Жыл бұрын
You made a cool video
@jamesdavid6122
2 жыл бұрын
Great Video...thanks I think I can do it also.
@shawnhorne9296
11 ай бұрын
My man you should power wash your machine before u install stuff , and when you're done mudding, your machine will last longer and not rust and rattle like look like shite
@adenlavigne8537
Жыл бұрын
Dude I got the same tires and getting the same luft
@christopherdavis195
3 жыл бұрын
For me im the type of guy I got to have the same size height and width tires for the front and back of my atv
@BankboiMulah704
Жыл бұрын
Awesome
@wesleydavidson4678
4 жыл бұрын
i have to do the same setup. did you have to trim any plastic?
@jacobweber5471
4 жыл бұрын
Wesley Davidson I did not have to trim any plastics! However, I have put 30mm spacers on it and that made the tire rub the plastics when the suspension was compressed but it was too little to trim any plastics.
@wleckeltleckelt303
4 жыл бұрын
Grind the corner of the bracket for clearance
@jacobweber5471
4 жыл бұрын
Wleckelt Leckelt Good idea! I threw on some 30mm spacers and it fixed the problem, and made it look even better!
@mudsweatandbeersmsb383
3 жыл бұрын
Awsome vid brother
@amosmoses8718
3 жыл бұрын
what size tires on the front n back, is that stock honda rims. If so I am wanting to run the same setup only with Zilla tires.
@jacobweber5471
3 жыл бұрын
They 27 inch ITP Mud Lite XL's on stock rims.
@randytrivitt6539
2 жыл бұрын
@@jacobweber5471 what are the ITP steel rims offsets on the rear of your four wheeler!! Are they 2+5 or 5+2!! I'm just wanting to know because I'm buying 12-inch rims for the rear of my 420 rancher!! Thanks a lot for the video!... 💯❤️🤍💙🙌👍👍
@georgewarren4993
Жыл бұрын
Why can’t you turn the spacers inward
@movedownsouthfilms936
4 жыл бұрын
Your not getting any ground clearance in the rear. Just more wheel clearance. The rear axle is not being lifted only the atv is.
@jacobweber5471
4 жыл бұрын
Correct
@AJV4L2007
Жыл бұрын
What size spacers should I get with 2 inch lift and 28s
@markbernard1032
2 жыл бұрын
I’m still looking for a video on how to install a 2022 grizzly 2” lift. I guess no one knows how to that one yet.
@elibyrd1593
3 жыл бұрын
Do you have the brackets on backwards the front goes to the back the back goes the front
@ivantorres9922
3 жыл бұрын
Thinking bout getting the mud lite 2 tires, how do they do in the mud ?
@jacobweber5471
3 жыл бұрын
I haven’t had any troubles with them. They have held up well in the mud. They eat through just about anything.
@codyrocks1269
2 жыл бұрын
What about irs 4 wheelers does the same lift still work
@danielmcginn2120
3 жыл бұрын
how do you like your tires?was thinking about buying same.
@jacobweber5471
3 жыл бұрын
I love them.
@enricoron3525
3 жыл бұрын
what year is your bike?
@jacobweber5471
3 жыл бұрын
2011
@noahgoldman3713
2 жыл бұрын
Do you know what brand shocks your running having hard time finding after market shocks for my 06 Honda foreman
@jacobweber5471
2 жыл бұрын
Not sure. They are stock.
@bradyladd4393
4 жыл бұрын
Do you think you could clear 28s after the lift?
@jacobweber5471
4 жыл бұрын
Brady Ladd yes I believe so. However when you put spacers on, 28’s might rub on the back fenders.
@zacpacheco7544
3 жыл бұрын
What your is you Quad My 04 rancher has a single Shock in the back.
@jacobweber5471
3 жыл бұрын
2011 Honda rubicon 500
@zacpacheco7544
3 жыл бұрын
@@jacobweber5471 Thank you
@mrgrady9460
3 жыл бұрын
what fourwheeler? bruin 350?
@jacobweber5471
3 жыл бұрын
2011 Honda Rubicon 500
@mrgrady9460
3 жыл бұрын
@@jacobweber5471 my bad
@SXSPRIME
Жыл бұрын
What size tire
@jacobweber5471
Жыл бұрын
27"
@gilliemoe8339
3 жыл бұрын
What year is it
@jacobweber5471
3 жыл бұрын
2011
@chrisjowers9284
11 ай бұрын
Man you don’t clean your bikes before you put them up
@frankdirt777
4 жыл бұрын
Good job.
@Zentifywyd
2 жыл бұрын
Do they make a 2inch highlifter lift kit for a 2005 Honda foreman ?
@jacobweber5471
2 жыл бұрын
Yes they make a kit.
@Zentifywyd
2 жыл бұрын
@@jacobweber5471 will I need spacers too run 28s or springs or anything?
@jacobweber5471
2 жыл бұрын
@@Zentifywyd probably will need the same things I did to mine u less you are going to cut plastics.
@Zentifywyd
2 жыл бұрын
@@jacobweber5471 what's all did u do too yours and can u either make a new vid on this or send the links
@jacobweber5471
2 жыл бұрын
@@Zentifywyd highlifter 2in lift kit and tusk wheel spacers.
@glockpullin7049
3 жыл бұрын
U need an inch spacer dawg
@p.b.sHUNTING
3 жыл бұрын
That's a janky looking kit. Definitely won't be installing this lift
@jacobweber5471
3 жыл бұрын
I have had this lift installed on my Honda for 7 months now. I have jumped the 4 wheeler, rode it on two wheels, done wheelies, mud rode with it and I have yet to have a single problem.
@p.b.sHUNTING
3 жыл бұрын
@@jacobweber5471 you have quite a few more years to go before you realize what I'm saying. Maybe the bolts stay tight for awhile, but by design it's the worst out there. When it goes bad it won't be minor.
@jacobweber5471
3 жыл бұрын
@@p.b.sHUNTING I check the bolts often to make sure they stay tight. I have not had one bolt come loose. The only negative part to having a lift is that it puts more stress on the cv shafts (axles).
@p.b.sHUNTING
3 жыл бұрын
@@jacobweber5471 supremesuspensions.com/products/2012-2013-honda-foreman-500-2-full-suspension-lift-kit?variant=28864974946384 This kit uses the upper mount for the shock, what you're using is a terrible design, and unsafe. Not you're fault, but no way I would ride around with a strap pinching the control arm to keep another bracket inline.
@jacobweber5471
3 жыл бұрын
@@p.b.sHUNTING hilglifter makes great products. Yea all have our own opinions. Maybe try keeping them to yourself
Пікірлер: 82