McKay Martin I used vice grips and used channel locks to lock them then used a pipe to gain leverage while turning
@nottelingu
10 жыл бұрын
so did you just rotate the rear hub for lift & didn't need to buy anything for the rear? and for the front would a 2.5" coil spacer do the same affect? cheers great vid mate
@JonesN4life
13 жыл бұрын
Yes it does but it's a very small amount so there is no need to adjust the camber unless you are doing a lot of street riding,
@JonesN4life
13 жыл бұрын
@dgadeken I broke the right front on the first ride after lifting it but don't let that scare you I would have broken it lifted or not... It was in a tough spot and the buddies had a lot coaxing into that broken axle and I still had to be pulled out Not a good day for the Yamaha or its rider...
@Beandiptheredneck
11 жыл бұрын
I just use a large pair of channel locks to adjust my shock
@JonesN4life
13 жыл бұрын
@newf30 when you flip the rear hub your rim rubs the upper arm when your tire is all the way extened down No I didn't have any thing rub or touch after completing but I have aftermarket rims. I have not measured against factory rims to see if there is any difference has yours rubbed?
@JonesN4life
13 жыл бұрын
@TheHondakid98 I made a 5 inch lift on my grizzly from steel, my dad owns a mechnic shop and he can cut those metals with a, i forgot what its called i think magma cutter or something like that ya it sits up WAY higher sounds cool I would like to see it...
@ryanchapman423
11 жыл бұрын
Ok i got a honda rancher 2007 without a independant suspension will this work on it
@McKaMartin
11 жыл бұрын
Hey ive been wanting to set my shocks tighter. I was wondering how you turned the adjuster on the shock. Ive been told to use vice grips but i cant get a good enough grip on it.
@newf30
13 жыл бұрын
when you flip the rear hub your rim rubs the upper arm when your tire is all the way extened down
@dfmodels1
12 жыл бұрын
@TheHondakid98 wont lift kit break spring ?
@dgadeken
13 жыл бұрын
Just wondering ive heard alot of people say you take bad risk of breaking axles when you flip your rear hubs have you had any problem since?
@JonesN4life
13 жыл бұрын
@varmithunting11 it was $89.00 at highlifter
@JonesN4life
13 жыл бұрын
mudboggin178 Anything can be lifted question is how much do you want to pay for it? I have a 250 with springs that could be lifted and I always thought buy why now you got me thinking why not. I'm thinking a 24" lift just for fun gonna be a while before I get started on this though I have several projects left on the Can-Am and the Grizzly, I just need some warm weather
@dustinserbin3054
4 жыл бұрын
Do you need to compress the spring/shock to do this or is it just a bolt and go?
@JonesN4life
4 жыл бұрын
No it's a simple bolt on bracket very easy to install
@393FORDSTROKER
11 жыл бұрын
So how much height did you gain out of lifting it? I know it says 2" lift, but what figures did you end up with cheers :)
@JonesN4life
11 жыл бұрын
size What?
@mudfrog76
11 жыл бұрын
does the lift kit come with a lift for the back?
@JonesN4life
12 жыл бұрын
My 660 rides smoother since it did...
@markbernard1032
2 жыл бұрын
Step by step instructions, telling someone hoy you did it is not same showing people what you did. Just saying. But good video on someone who knows a little bit about mechanics.
@jonesnlife380
2 жыл бұрын
I kinda run with the thought process if you can’t understand what I’m telling you it’s probably not safe for you to attempt it. I do appreciate your feedback though something to definitely keep in mind
@CTParker13
12 жыл бұрын
PLASMA cutter
@JonesN4life
12 жыл бұрын
@Coolkid0312 How much did that kit cost lookin for one on my Honda fourtrax it was only $89.00 my buddy at Little Lloyds ATV can hook you up... 903-584-9131
Пікірлер: 24