Need more video's, done watched all of them!! The BEST TAO TAO Lancer channel on KZitem!! Keep up the AMAZING work.
@kachiskid
5 жыл бұрын
I will get my production team back to work ASAP. Thanks for all your wonderful support!
@quietstormtcb8543
5 жыл бұрын
@@kachiskid LOL...i will stay tuned!!
@RamenOnWheels
5 жыл бұрын
definitely adds an sleek edginess to it. Nice work.
@kachiskid
5 жыл бұрын
Thank you Ramen.
@lawrence471
10 ай бұрын
That stock exhaust I drill out the rivets and gut out the inside and cut them in half make them into shorties then reassemble with new rivets. And it's better than aftermarket.
@kachiskid
10 ай бұрын
Great idea.
@aski1529
4 ай бұрын
Does it have restrictors inside?
@lawrence471
3 ай бұрын
No completely hollow nothing inside.
@YaBoiPOpZ
5 жыл бұрын
Sounds dope, thanks for the help
@kachiskid
5 жыл бұрын
No problem Yaboi, anytime.
@rccr23
5 жыл бұрын
Sounds great
@kachiskid
5 жыл бұрын
Thanks buddy, I think so too. I did get a chance to ride today, and it was awesome!
@rccr23
5 жыл бұрын
Nice! Does it affect the suspension at all?
@kachiskid
5 жыл бұрын
@@rccr23 Not as of yet but I'm sure over time it's not what I want. Plus I was just about to buy some shocks with the the air canisters on them, I'll hold off until I get it straight. Also the zip tie area is getting hot so I gotta make that bracket. Plenty of time... today I just got lucky with the weather.
@christianalbino2802
4 жыл бұрын
Hey I want to put a aftermarket exhaust on my 2019 vitacci rocket can you suggest something
@kachiskid
4 жыл бұрын
No problem, send a pic of your bike to kachiskid@gmail.com
@badBikerz
5 жыл бұрын
Good jog, sounds real nice. As always I am wondering about a performance and any type of speed increase mainly on the top end ?
@kachiskid
5 жыл бұрын
Thanks Glen, what type of bike do you have, and what is your performance profile?
@badBikerz
5 жыл бұрын
@@kachiskid we spoke in your other post the 150cc speed test I have the exact scoot you have, 2017 Lancer 150cc cy150D. I now reach 52mph top speed on flat level ground according to gps. And on a slight downhill hit 57. Getting ready to install those 15/37 gears. Just have to get a impact wrench to make the job easier
@nicolecantu4946
5 жыл бұрын
Let me know if you get more speed it look like it do,when you gave it gas.
@kachiskid
5 жыл бұрын
Thanks for the sub, Stay tuned...I was able to take her out today.
@JQUICK21
5 жыл бұрын
What is that chrome thing overtop the fan there above the pipe?
@kachiskid
5 жыл бұрын
Chrome fan cover: amzn.to/2y8OZa1
@george102472
5 жыл бұрын
I made a video just the scooter I make another one to this week With the wire .but look this one and see I don't have any running lights in the front
@kachiskid
5 жыл бұрын
Lol. Yeah you just have the 2 bulbs like I do. Those extra lights I have are LED running strips that I installed. I subbed to your channel...lucky #6.
@Hexsyn
4 жыл бұрын
You get a like for the clue reference alone lol
@kachiskid
4 жыл бұрын
Thank you Micah, 80's kid, so I will be using a lot of references from that era.
@Hexsyn
4 жыл бұрын
@@kachiskid 89 here, so I don't know if that really counts :p. Love your scooter content btw, glad to see coverage of 150 Chinese scooters since most of what I find is for 49/50cc models.
@kachiskid
4 жыл бұрын
@@Hexsyn lol...'89 counts my friend. Yeah 150's are what you need to ride on 50mph rodes around here. You"'ll get smashed at 37mph.
@Hexsyn
4 жыл бұрын
@@kachiskid and heaven forbid you encounter a hill...
@kachiskid
4 жыл бұрын
lol..From 37 to 18 in a flash.
@Lsemprit30
4 жыл бұрын
Hey I bought a 150cc muffler high performance and it don't wanna go in ???? Any ideas please
@kachiskid
4 жыл бұрын
Plenty, did you replace the pipe also? What type of bike? muffler? What do you mean didn't want to go? Do you need to bend it? To close to the frame?
@Lsemprit30
4 жыл бұрын
@@kachiskid ok I bought it at Amazon it's called 150cc xsport it's orange it's a 2020 it's new so I bought a high performance muffler for a 150cc yo when muffler got here I put them next to each other I mean like where it goes in to the motor it's all the same but the pipe it came with the new one has brackets and I feel that it's the brackets that's not letting it go in the pipi is the same it's just them new clamps what u think about what I told u what u think it is by what I said please man I need help like I wanna put it on I'm from spfld,ma too
@kachiskid
4 жыл бұрын
Ok, good info. I need you to take pics on the bike, muffler, pipe leading to the engine, the bracket, and where you are expecting it to connect to the bike. Did you have a mounting bracket like the one I cut off in the video? If making a video is easier, do that. Send them to kachiskid@gmail.com. We will fix it.
@george102472
5 жыл бұрын
Hey I got a question.im thinking of getting the performance variator for my 150cc to you have that already and does it make any difference in the performance please let me know
@kachiskid
5 жыл бұрын
Yup, I do. I have to be honest and say I'm not sure if it improved performance or not. The belt isn't going any higher, more important is what you put in the variator. Right now running 14 gram Dr. Pulley Sliders but will be picking up some 11grams soon. You currently have 13 grams rollers in yours.
@george102472
5 жыл бұрын
13 grams I have I thought I had 10 gram's and I switched it to 12 grams sliders thanks for letting me know now I will have to get 13 grams sliders .you sure I have 13 I toke them off there rollers I wanted sliders instead .oh well back to order sliders 13 grams
@george102472
5 жыл бұрын
To Tell you the truth 12grams sliders runs good with the exhaust
@kachiskid
5 жыл бұрын
Georgios, your bike is new, right? Give it some time to break in before you start changing everything maybe. Yeah I weighed each roller when I took them out the variator, they are 13's.
@george102472
5 жыл бұрын
I know IAM OCD WITH MY STUFF LIKE WHEN I BOUGHT THE LITTLE ONE IN A MATTER OF TWO MONTHS I HAD EVERYTHING DONE ON IT YEAH I'M NOT GOING TO MESS WITH ENGINE ON THIS ONE I'M JUST GOING TO DO THAT TRANSMISSION AND THAT JUST FAST ENOUGH FOR ME BUT YOU KNOW THOUGH WHO KNOWS IN THE FUTURE MAN YOU KNOW BUT THANKS THOUGH I REALLY APPRECIATE YOU HELPING ME OUT
@wiredgaming8504
4 жыл бұрын
Hey fam it’s me again 😅can the exhaust fit onto the stock pipes cause imma do it in parts 😓
@kachiskid
4 жыл бұрын
No sir, some will but this one. Connecting port is too big.
@wiredgaming8504
4 жыл бұрын
Kachi's Kid so I’m going to need to get new pipes to install a muffler or any muffler? I just want a nice sound motorcycle like muffler? Thanks fam I was about to buy😓 but luckily I was like wait for your reply before buy. I just got viva phone mount and gorilla glue 😁 oh and the Velcro tape for the mat and I’m thinking of putting a little mini travel tank mounting it for a beta fish 😁👌
@kachiskid
4 жыл бұрын
Lil bro, are you 4real about the beta fish, that would be so cool! Some people have had the stock pipe connect to mufflers I didn't think it could though. Might want to check out a forum or 2 to get ideas. Again I can't weld as of yet, but Vasily Custom Build can connect anything to anything metal with his welding skill. For me $$ has to replace limitation to my skills.
@josepeixoto3384
3 жыл бұрын
and..it ran worse than before? lost low end torque,maybe?
@kachiskid
3 жыл бұрын
Nope , not at all. Love that exhaust!
@Hollylivengood
5 жыл бұрын
I'm sure all of you have seen how to instal a muffler...right, because we always click on how to instal a muffler when we already know how to do it. Thanks for nothing.
Пікірлер: 60