Thank you for your time and video. Keep up the good work. IT IS PEOPLELIKE YOU THAT MAKE THE WORLD A BETTER PLACE TO LIVE IN Cheers from IRELAND Green Paddy
@jaseyarm
2 жыл бұрын
thanks so much for the helpful video guys - we had the cctv guy round and he couldnt work out what to do about the encryption key, but i cracked it with the help of your video after he left ;) Cheers again guys :)
@davidhibbert3448
3 жыл бұрын
Thanks guys fixed the live view issue I had on my system with help from your video.
@popeyethesailor9
4 жыл бұрын
I am new to Hikvision network cameras and you channel is a great source of info, thanks and keep up the great work 👍
@pritamyadav8150
Жыл бұрын
Thanks a lot sir ji For this video I am searching lot of video but no solution ....but your video such a good video..... 🎉🎉🎉🎉🎉
@yogeshwargawali9344
3 жыл бұрын
when enter encryption key showing Failed to set parameters. please help me it not in 4200 it in pc through lan when we type ip address in address bar and login and see view camera
@DVSLTD
3 жыл бұрын
you mean when entering this on the 4200 key ?
@akuntumbal8540
4 жыл бұрын
thankyou bro, you're the best... finally, i can open all camera in ivms 4200 from account hic connect..
@DVSLTD
4 жыл бұрын
Thanks for the feedback and glad its sorted 😊
@markjagmundy
3 жыл бұрын
Great video, which solved my issue quickly and easily
@DIY-UK
2 жыл бұрын
Really good presentation, very informative, thank you
@venkateshpilla6777
2 жыл бұрын
Tq so much .its working
@MrNiceGuyICT
5 жыл бұрын
thanks mate...it works for me
@DVSLTD
5 жыл бұрын
Thanks for the feedback
@aguinaldopedro3346
2 жыл бұрын
Thank you dude it really helped me.
@biginner6356
2 жыл бұрын
Really Helpful Thanks dude 😍
@albertomule5392
3 жыл бұрын
thanks so much you are very helpfull wit setup my cctv system thanks again
@gauravparag6822
4 жыл бұрын
thanks so much From india Bharat
@robb7370
3 жыл бұрын
helped me loads, solved my problem thank you
@M.Akramtrader6304
3 жыл бұрын
Thank you sir 😍 thank you so much
@PeeCee249
Жыл бұрын
Hi can you please tell me how you selected all cameras (@4.58 in your video) for live view, as i can only select a single camera at a time to go into my live view grid Many thanks
@nikitaniki
3 жыл бұрын
thanks for this video :)
@ZachDxn
3 жыл бұрын
Thanks a bunch!
@Hrvoje35
4 жыл бұрын
Thank you very much !
@ahmedmohsenelmansy4196
2 жыл бұрын
Great video thanks 🙏
@ahmedmohsenelmansy4196
2 жыл бұрын
I face a problem in Hik-Connect when I open cameras ( the network is unstable connecting again) and sometimes I face ( the device is offline) plz I need your help to solve this 🙏🙏
@mirazizpulatov
4 жыл бұрын
Thanks a lot mate !
@timmytime4065
4 жыл бұрын
Thanks so much. You got me out of a hole again with this video.
@fragmentedgaming1612
2 жыл бұрын
Hi. I did that. But as soon as i go back to live view my encryption key goes back to the old one. How can i permanently save it
@DVSLTD
2 жыл бұрын
it should save it , but if its not working you can go into the HIK-Connect app itself on the phone ,under added device setting turn off stream encryption and this will disable it full time if this helps?
@dariode70
3 жыл бұрын
Thx your a boss 👍🏽
@sumonahmed4415
2 жыл бұрын
Nice
@tanveerabbas8095
Жыл бұрын
Hello hi bro I have problem in hikvision dvr huhi m2/s (all camera shows recording on but when I go to playback checked dvr showing adding playback channel failed) plz help to solve this problem ok thanks
@marcocasamassima389
4 жыл бұрын
From the HikConnect documentation I read: "The Stream encryption function encrypts the video stream sent from NVR and user needs to input verification code for live view or playback." We have to realize one thing. One is the streaming from the NVR (HikConnect) to the user, another thing is the streaming from the source (the camera) and the server. My question is: what about the stream from the camera to the HikConnect. Is that encrypted as well? I have my serious doubt on this as the camera doesn't provide any key configuration for stream encryption (eg: encryption key). Or, does HikVision cameras use a custom streaming protocol in case of Platform Access enabled? Thank you for the helpful answer.
@DVSLTD
4 жыл бұрын
Marco and thanks for the question , actually on the latest models and firmware the camera itself also has this function not just the NVR / DVR , so if you use HIK-Connect on the edge device direct to P2P this can also do the encryption key , I hope this helps 😊
@BIBINLAL
3 жыл бұрын
Thanks bro..
@justinkinsey5517
3 жыл бұрын
@Dvsltd is there a support issue with using MS Edge browser with Hikvision, unable to active the plug in
@DVSLTD
3 жыл бұрын
most modern firmware uses pluginless option , and the web component doesn’t work with Edge, can you use IE for full functions still
@justinkinsey5517
3 жыл бұрын
@@DVSLTDlove the videos, your expertise and presentation is brilliant, I will use IE so I can access the cameras, another question cameras with sd card slots will they record to both onboard and to an NVR? I'm assuming so.
@P90Camper
5 жыл бұрын
Great video thank you! What is your recommendation on using stream encryption or not? What is the downside to not using it? So - when you first turn on hik-connect have to turn it on - then go to the NVR directly or the app and shut it off?
@DVSLTD
5 жыл бұрын
Hi , it’s a personal choice in reality , it protects the video stream and adds a layer of security in, if you don’t use it then make sure you don’t use default ports and use complex passwords etc. , and any additional security measures that you think are fit for purpose
@P90Camper
5 жыл бұрын
@@DVSLTD Thanks for your reply. Could you characterize what type of customer you would use it for? For a small business? IMHO changing the port is does not really add security but it can make it harder for noobs to find it. I have tried to use it but the problems it seems to create (probably my configuration errors) can be troublesome. Seems like both 4200 and connect/4500 loose the key after some time? Then users complain they don't know what it is and is a phone call. 4200 lite does not have a place to add it like he regular version does. Is that your experience? Am I implementing the key incorrectly somewhere?
@amertat782
5 жыл бұрын
hi dave thanks for your lovely and useful vids, sorry for asking this question which is not related to this video but please answer that: can i use Turbo HD PIR cameras with Turbo HD 4.0 DVRs or just Turbo HD 5.0 DVRs could be use with this analog camera?
@DVSLTD
5 жыл бұрын
Hi , thanks for the feedback , its fine to use them on Turbo 4.0 , if you use the new 5MP model and only have HQHI-K model DVR it will downgrade image to 4MP lite , if using HUHI-K it will use 5MP , hope this helps 😀
@jacksparrow1588
4 жыл бұрын
One more thing. I cannot use the live Playback option in the browser for my NVR. I tried IE with the installed plugin, IE tab in chrome and almost anything I could think of and found on the interweb. I get only grey screens.
@dashcamvids
4 жыл бұрын
hello. Thanks a lot for the video. it appears the HVR 4.0 has changed few things. On the web UI, we no longer seem to have "Local" under the configuration tab.. is there any other place were we can enter the encryption key?
@DVSLTD
4 жыл бұрын
Hi , it should be there if it’s not try clearing the browser cache and uninstall and reinstall the web components, that should sort it
@dashcamvids
4 жыл бұрын
could you please let me know what you mean by web components?
@jacksparrow1588
4 жыл бұрын
Local appears only when running the config web page from within IE.
@DVSLTD
4 жыл бұрын
@@jacksparrow1588 On latest 4200 it will ask you to input the encryption
@yogeshwargawali9344
3 жыл бұрын
no on on 4200 in conected in lan dvr and view on pc
@isyt1
3 жыл бұрын
What are the implications of turning off stream encryption?
@DVSLTD
3 жыл бұрын
It becomes a normal stream so technically you can use RTSP to get the stream if you know the username and password ,
@isyt1
3 жыл бұрын
@@DVSLTD But don’t you still need the username and password even when the stream is encrypted? I’m guessing it’s to stop a potential MITM attack
@DVSLTD
3 жыл бұрын
@@isyt1 yes the stream encryption helps to stop issues like pulling streams via RTSP and ONVIF etc,
@davidanderson1036
3 жыл бұрын
It's a good video but it's even more complicated on the latest version of the software
@fernandoortiz651
Жыл бұрын
muchas gracias por tu aporte
@hamed827
Жыл бұрын
Hi I have an AX PRO, How can i connect it to my IVMS 4200? It needs admin password, how can I set password. thanks
@7918476
4 жыл бұрын
Im not evan seeing the "Local" category, everything else is there.plz help! Btw im using the Web browser
@DVSLTD
4 жыл бұрын
ok are you using Internet explorer? If not try that , and if so try go to control panel, then under uninstall programmes uninstall web components , then when you browse next to the device on IE install the web component again, them go to internet settings and clear the browser cache , then it should work
@mytube7473
2 жыл бұрын
Can you please ask Hikvision to update their firmware to add stream encryption support for the intercom touch screen (DS-KH6320-WTE1). Also h.265 support. At the moment you can only add camera feeds to the screen if you have cameras set to h.264 & stream encryption off.
@aslanbey253
2 жыл бұрын
thankss
@yogeshwargawali9344
3 жыл бұрын
Failed to set parameters. appear
@CryT0R
5 жыл бұрын
Hi from Russia, correctly, I understand that if encryption is enabled - will you not be able to get the rtsp stream from the camera?
@DVSLTD
5 жыл бұрын
Correct , for that we need to turn encryption off
@yogeshwargawali9344
3 жыл бұрын
no when we view on pc on lan
@pharezknights5467
2 жыл бұрын
Not seeing Encryption Key in local :(
@jacksparrow1588
4 жыл бұрын
There are also some bugs in the latest fw for my NVR, that I'd like to report to hikvision. Really disconcerting.
@ChannelLoblob
2 жыл бұрын
How to get that address @3:30 ?
@azanabdul5319
4 жыл бұрын
hey, thanks for sharing. I have some issue with my streaming whenever I try to stream using rtsp the video output is gray. it might caused by stream encryption enabled, but I cannot find "Platform Access" option either on webUI or by the local menu on the DVR / NVR. do you have any experience with this ? or Is there any another way to disabled this?
@DVSLTD
4 жыл бұрын
Hi , it could be the H.265+ if your using this , but on the local GUI it should be under network , advanced, platform access , and then stream encryption, does this help?
@azanabdul5319
4 жыл бұрын
@@DVSLTD hey thanks for your reply, nope I can't find it anywhere on local GUI
@jacksparrow1588
4 жыл бұрын
@@DVSLTD It doesn't have anything to do with H265. I have left the video encoding to default H264. The FW is buggy.
@DVSLTD
4 жыл бұрын
@@jacksparrow1588 What model and firmware are you on?
@jacksparrow1588
4 жыл бұрын
@@DVSLTD DS-7208HQHI-K1 Embedded Net DVR FW: V4.21.100 build 200307 As I commented below: My experience with stream encryption is that every single time I've tried to stream the rtsp feed through vlc having encryption enabled, results in gray, garbled, corrupted feed. Once I disable stream encryption everything runs like it should, perfect video image. I guess hikvision's encryption feature is buggy software wise or a compatibility issue between encrypted stream and vlc, but I doubt it has anything to do with vlc. Another thing this FW v. is buggy. The video settings, namely resolution, bitrate, fps changed from within the Video/Audio page from within the browser are being discarded and do not get applied. If however I change them from within the NVR's config menu, they do get applied and together with stream encryption DISABLED, I get a perfect video feed. Once I enable encryption, it results in garbled grey/green screen i.e. corrupt video feed. However iVMS 4200 app has helped me, while I couldn't make the the Playback feature from within the browser work. I tried all gimmicks, IE tab, IE explorer, Edge, everything and I am tech savvy. iVMS 4200 playback feature works flawlessly. I don't think that enabling encryption in iVMS4200 will make a difference.
@rajjomanni4038
2 жыл бұрын
Meine cam chlaea hai kisi offc ka cam chl gye par on nhi ho rahe..input encryption password mang rha hai..wo kha milega koi bta sakta h
@philtaylor3098
5 жыл бұрын
My app doesn't have this option. Is there another way of doing this?
@DVSLTD
5 жыл бұрын
Hi phil , the best way to turn off the encryption key is by the local menu on the DVR / NVR and under network then platform access. Can you see it???
@philtaylor3098
5 жыл бұрын
@@DVSLTD Yep, got it....Cheers dude.
@DVSLTD
5 жыл бұрын
@@philtaylor3098 that's what we like to hear 😀
@philtaylor3098
5 жыл бұрын
@@DVSLTD I've been in IT management for over 20 years and I am seriously perplexed at the this companies lack of standards, lousy documentation, the level of assumed knowledge just to get the thing working, and sequence of events needed to get the thing online, but I'm stuck with it now. If I ever get the chance I'll switch to anything Sony does. Once again thank you very much.
@marceugeneiieugenio6026
4 жыл бұрын
There is no "local". I can't see it? What would I do?
@DVSLTD
4 жыл бұрын
Sorry , do you mean “local live view” ??
@andriono08
4 жыл бұрын
@@DVSLTD He means 'local' as 4:30. .. the question is how to get live view on web browser other than IE browser, since "local" can be only seen (managed) through IE browser
@richstaniforth7713
3 жыл бұрын
What about adding NVR Cameras to Indoor stations, there is no options to enter an Encryption Key. So must I disable Enc if I wanted to stream camera's to my indoor "villa" stations. (I've the new Android versions)
@DVSLTD
3 жыл бұрын
are you using the HIK-Connect on the android screen ?
@johncolclough625
3 жыл бұрын
didnt work for me couldnt find the local box, please do an update video and clearly show where press
@pnsave2010
3 жыл бұрын
Hi everybody. After I installed hikvision Camara everything was fine I could watch the video from my phone but the problem is after hulf an hour when I was trying to go to the app is asking encryption passwords. Could u pls tell me where I get this password. Thanks
@ajsi2164
2 жыл бұрын
Did you found it becai have the same problem
@jacksparrow1588
4 жыл бұрын
My experience with stream encryption is that every single time I've tried to stream the rtsp feed through vlc having encryption enabled, results in gray, garbled, corrupted feed. Once I disable stream encryption everything runs like it should, perfect video image. I guess hikvision's encryption feature is buggy software wise or a compatibility issue between encrypted stream and vlc, but I doubt it has anything to do with vlc.
@isyt1
3 жыл бұрын
I’m having the same issue. I’m wanting to stream the rtsp feed to my raspberrypi and it doesn’t work. With VLC I get the grey garbled screen you mention despite the fact that the username and password are in the url. I’m guessing there must be an additional parameter that you add to the rtsp url to set the encryption key but it doesn’t seem to be documented. Did you ever get it sorted?
Пікірлер: 93