Thanks so much for these 5 videos! I just got my TREX 450 SE V2 up and running with the ZYX! Could not have done it without your virtual help!
@PHeMoX
12 жыл бұрын
Thank you, I appreciate it! That's exactly what I'm going through at the moment, so I'll just ignore lengths mentioned in the manual for now and unwind the swash to servo linkages as much as I dare as well and re-adjust with the pitch linkages as much as physically possible to shoot for zero pitch on midstick and equal pitch range. :)
@hansloeffler4170
12 жыл бұрын
That is one superb video! Thank you very much, you made it easy for me... Hans
@sgbfly
12 жыл бұрын
Thanks George!
@sgbfly
12 жыл бұрын
I'm away from the helicopter at the moment so forgive me for not answering with numbers at this time (I'll get back to you on this!). Also, please bear in mind that these are v1 / v2 clones. With that said I found similar - the swash to servo linkages were wound out as much as I dare to make them as long as possible. The pitch linkages are the Tarot adjustable linkages and they are wound in almost to the limit to make those arms relatively short. This avoided binding with -ve pitch & cyclic.
@sgbfly
12 жыл бұрын
Thanks mate!
@PHeMoX
12 жыл бұрын
Excellent video, looking forward to the next parts Simon. Thanks! I've got one question for you, could you please provide the length of the swash linkages (three shorter ones, obviously) and pitch linkages (two long ones) on your flybarless helicopter? For some reason the Align 450 3G manual doesn't really give good 'in the ballpark' lengths. I'm already close to what it should be on my CopterX 450 Pro, but I'm wondering if I shouldn't go out and just buy longer servo to swash linkages.
@sgbfly
12 жыл бұрын
Thanks!
@sgbfly
11 жыл бұрын
Thanks Philip. I guess this answers my original question. Are you using expo to desensitise the sticks near the midpoint? Tarot recommends 40% to start with. (Although I now fly with 20% now I am more used to the heli).
@b4566bb
11 жыл бұрын
Has it been a year already?? Wow!
@philcav7401
11 жыл бұрын
Hi simon brilliant videos but when i took off my heli went forward it seemed to be to sensitive can you help please
@b4566bb
12 жыл бұрын
A fantastic introduction! (Please see private email for my usual smites)
@snpacia
10 жыл бұрын
I bought a flybarred KDS Innova 450QS. Can I also convert it to flybarless using the parts you mentioned in the video?
@herminigildojakosalem8664
6 жыл бұрын
Your question is 4 years old but just in case some new viewer has the same question, the answer is yes, you can. Discard your old tail gyro and your old flybarred rotor head, replace your old tail gyro with a FBL 3-axes gyro ( I recommend the TGZ380 (cheap, easy to set-up and reliable), replace your old flybarred rotorhead with a FBL head (I bought Tarot). Watch youtube videos (such as the above) to set your KDS Heli and you are good to go. (I have actually converted ny KDS 450C). I have several times replaced my KDS swash servos since I bought my heli due to crashes but if I remember right the original (factory) swash servos on my KDS 450C were digitals (KDS-N580 or KDS-N590), If yours still are, then they are good to be used with an FBL. Otherwise, the masters recommend upgrading your analog swash servos to digital as they would be best for FBL Have fun!
@sgbfly
12 жыл бұрын
Thanks Mate! (Lol, at least I think so.....your email has yet to land in my inbox!)
Пікірлер: 16