I just recieved my Max10 g2 its alot nicer than the first gen version i have! Hobbywing makes a good product plus i like the sound the esc makes when you brake.
@Cameron2874
9 ай бұрын
Just a tip that got passed onto me is spray furniture polish ( thinking of inside wheel so sand won't stick and unbalance wheel) I got this tip for under mower deck so grass doesn't stick and works amazing so thought might help you in this situation . Worth a shot at least 🤷♂️
@RuisRcAdventures
Жыл бұрын
That combo looks smooth as man, thats awesome. I'll have to see of they're gonna bring out a 3300kv, i'd like to fit one to one of my bashers. Nice run dude 👌
@dakinechips
Жыл бұрын
I'm getting the 3300kv setup for a 2s build I'm gonna get.
@old-rcplane-phart
Жыл бұрын
Where the inner fenders contact anywhere on the main chassis, add some foam, OR servo tape. That WILL keep the track from getting INto the main chassis.
@jasonchilson8910
Жыл бұрын
Still at work in Washington state good thing I only have to wotch the front gate tonight
@gpaull2
4 ай бұрын
This is the system I would’ve like to see in your Ryft.
@cjchannel12RC
Жыл бұрын
Wow, I might have to consider the new Hobbywing G2 systems for my bashers i have considered Castle copperhead 10's and Mamba X's for my slashes, my Hoss and my future Rlaarlo AK917. But now i might consider the new hobbywing G2's, thanks for the great video.
@slow_mk5_
Жыл бұрын
Hey man love your videos!! I have a Senton that I run on 4s and this thing is a beast!! The Gen Ace Pro Bashing are a pretty good option battery wise on those. Try some Proline badlands SC or if you want some pretty mean paddle tires, the Proline Dumont are perfect amazing.
@Magneticitist
9 ай бұрын
I love this combo on my ARRMA Big Rock but it takes getting used to. Not sure if it would be ideal for guys trying to race but I really needed it for more slow moving torque. Love the no cogging. It doesn't even seem like I sacrificed any speed with the 2400kv either. Setting turbo timing up some might be crazy.
@dandyer8351
Жыл бұрын
Nice driveing drives very smooth.
@mikehagquist5198
Жыл бұрын
Need out door light for the track one day would be cool. Expensive but would be cool for some night racing
@TexasWaters
Жыл бұрын
Man that looks like fun! Great video ! I ordered this setup because of this video, Thanks ! I'm going to put it in a Traxxas Ford Fiesta ST Rally. Question, What pinion and spur did you go with? I ordered a Robinson Racing .08 22T pinion and a Traxxas .08 50T spur, hope it works!
@Moggmodels23
Жыл бұрын
Just watched your video it's brilliant video mate keep it up bro 👍👏👌
@iaqmaster
Жыл бұрын
Looking forward to the Ryft build for racing
@JIPPERR_1
Жыл бұрын
Thats funny I've just installed a similar spec, although I went the surpass hobby route. Moves pretty good on 3s!
@Mckhus
Жыл бұрын
Ye man this system looks damn sweet. As others said, seems on paper like perfect ryft fit and that’s where I though I’d put mine. Could you try that?
@craigengelman4534
Жыл бұрын
best tires to get 17mm hexs and swap your typhon badlands on it . also proline sct shocks front PRO606300 rear PRO606301 . personally id put this body on it ! Pro-line Racing 1/10 1978 Chevy C-10 Race Truck Clear Body: Short Course, PRO351000 . or you could get crazy with a narrow creep body !!
@JoesRcAdventures
Жыл бұрын
MAN..😲 🤔BET this combo would be a BLAST in my trx4💪🤣✌️💨💨
@DoubleADay
Жыл бұрын
I for one can tell you that the 3300kv r2 axe system kicks ass in my trx4
@JoesRcAdventures
Жыл бұрын
@@DoubleADay I've got the 2100kv combo.. more torque.. I run 20t/39t gearing✌️🤣
@pedrowoolson4273
Жыл бұрын
Surpass 1400W 3665 3500KV works great in the Arrma plastic chassis cars...
@armandopace6113
Жыл бұрын
More balls with lower KV's
@jeffparryncc1701
Жыл бұрын
Would this motor fit into an Axial Wraith???? Because HELL YEAH!!
@VITALIXX
Жыл бұрын
Great video, I was wondering of I'd be able to pair a spektrum esc with a hobbywing motor as long as the pole measurements are correct
@IsaacSchultz-lz8jc
3 ай бұрын
4 pole is the standard you should not have a issue
@Nick-tr2zd
Жыл бұрын
Omg!! Comes on quick..
@smiley37greg
Жыл бұрын
Very nice
@andrewwadas2180
Жыл бұрын
So smooth! Also can U put the sand guard in between but in front of the fender wells? In the video it appeared there was space and would block more if you can scribe the contours. I think I'm gonna use Gorilla tape on both sides (inner/outer)
@illic0
Жыл бұрын
Cool 👍🏻
@thejeepinrealtor5742
Жыл бұрын
This is on sale for $173 right now. Just fyi :)
@T0x1c0v3r
Жыл бұрын
I'm thinking to order one for my ryft. Can't wait to see more of testing this g2 max10 on different cars. How do you think, will it do ok for the ryft?
@old-rcplane-phart
Жыл бұрын
👍😁
@owen8538
Ай бұрын
Is these motor all got 5mm shaft please
@boharris8179
Жыл бұрын
How do you think that setup would do on a plastic chassis Ryft? I see your Adiktiv chassis for the scx6 is on the sidelines.....the guys say the esc doesn't do the crawler reverse and it's hard to get off your lid. Is that just a esc issue? No instant reverse?😊
@tung2003us
Жыл бұрын
Is this combo suitable for a rock crawler? Looks super smooth.
@christopherpalusak2510
Жыл бұрын
Joe could i use 30,000 weight grease with 1 million weight oil in the front differental with a center spool . On the dbxle 2.0.
@straight_six7269
Жыл бұрын
Mine doesnt power up the receiver everytime it gets water on.. is this normal?
@SteveSoper1979
Жыл бұрын
Have you ran this system on 2s? My local indoor clay track you have to run 2s so I'd be curious to hear your thoughts if you have.
@ExocagedRC
Жыл бұрын
On 2S I’d go with a higher Kv motor.
@gpaull2
4 ай бұрын
What a pointless rule. Watts is the determining factor of power and speed available, not cell count. You can change gearing and motor KV to get any amount of speed/power from any cell count.
@FOURFTP
3 ай бұрын
@@ExocagedRCwhat KV motor do you recommend coming from 550 brushed motor
@lowkeyblxke8586
11 ай бұрын
You think it would be good for trx4?
@HBFTimmahh
Жыл бұрын
imo, your 1st jumps transition is a little sharp, launching the rear up at the end of its rebound stroke as it comes off the ramp, kicking the ass end up. I think as you noted, a bit better shock oil setup, batter and balanced wheels as you could hear them out of balance, maybe coming unglued in a spot or two on one. And then make that approach on the 1st ramp a bit longer so its a bit more smooth should make all the difference. Could hear the chassis slapping the ramp face as you transitioned to it.
@calebgilmore3327
Жыл бұрын
Was that on the stock gearing?
@christianoBlaylock
Жыл бұрын
where is this track?
@BeerBOng88
Жыл бұрын
What kind of gearing do you have in their ??
@stefanalthoff2921
Жыл бұрын
What happens if you brake more than once? Does the car then reverse immediately? Or does it only reverse when the car is stationary?
@ExocagedRC
Жыл бұрын
depends on the esc, some will give you reverse even if it hasn't stopped, some will not until the motor has stopped rotating
@stefanalthoff2921
Жыл бұрын
@@ExocagedRC how does the MAX10 G2 do it. That's what this video is about.
@tobydyes
Жыл бұрын
Now the price is like 220
@alaskanmusher7098
Жыл бұрын
172.99 rn
@michaelr6016
Жыл бұрын
172 at amain
@redndeyes
Жыл бұрын
How are your diffs surviving? Lol. That's why my 3s bigcrock sits in a box and went to maxx. Grew tired of rebuilding the plastics.
@alextuxhorn8921
Жыл бұрын
Hot racing make full metal spiral cut diffs. Did them in my Denton with the aluminum hot racing yoke and it took 4s all day long, cost bout 50 bucks a diff. By the time you rebuild the stock ones 3 or 4 times you have the same amount of money.
@SMRc95
Жыл бұрын
New 4s diffs are much stronger, swap right in
@alextuxhorn8921
Жыл бұрын
@@SMRc95 i did the hot racing before the new 4s came out, i wouldn't know now lol. Ive sold my senton and got a 6s typhon and converted to run 8s, stupid crazy buggy
@Nhanny108
Жыл бұрын
What heatsink /fan is that ???
@IsaacSchultz-lz8jc
3 ай бұрын
Stock arrma 3s heatsink and fan
@kevinwaynethompson67
Жыл бұрын
What was your gearing?
@ExocagedRC
Жыл бұрын
Stock I think.
@RUZTY1311
10 ай бұрын
Did you say if this was 3 or 4s?
@IsaacSchultz-lz8jc
3 ай бұрын
It can run 2-4s
@IsaacSchultz-lz8jc
3 ай бұрын
He is running 3s
@mychalpstanton9188
Жыл бұрын
Slow as hell gear it up you keep doing this when u put low kv motors in common sense says gear up 3 teeth at least thhen will be a beast
Пікірлер: 65