Man's really jamming his piece back into that holster like he's trynna never have any kids
@xringeagle
Жыл бұрын
Great video. Excellent point on not doing a review until you have had time to really put it to the test. Also, great point on having to clean the lens and the advantage of the enclosed emitter.
@steve6548
Жыл бұрын
Thanks for the video on this combo. Your draw stroke is really smooth.
@TwelveBravo
Жыл бұрын
Thanks for the preview. I like that you won’t review something until you’ve put it through some trials. Thumbs up, and a follow.
@elihernandez1656
10 ай бұрын
Great video and very good practice. Real fast split-second draw but looking in detail, I see a perceivable ~ 1 second delay in your sight alignment. I take it as if the brain make final adjustments with the red dot. This is why I stay away from conceal carry my HK P30SK with optics. From 0 to 10 yards I go with instinctive point shooting and eliminate that delay effect. Remember the fast and the dead thing. Thank you for this valuable video!
@pehenryjr
2 жыл бұрын
Man you are going to love the enclosed because with the 509T all you have to do (while holstered, without looking, with your thumb, through your shirt) wipe the glass off. I just thought of a funny video intro guy in his room getting ready to put on his EDC girl outside the room calls him are you ready to go yet. After quickly trying to get a a draw to sight picture repetition in he noticed Optics too dirty then begins the ridiculous struggle of trying to get that lens clean with a keyboard vacuum, canned air, q-tip, alcohol pad, blowing on it. All while being pestered to hurry up. Cut to the scene where the guy with the new EPS just swiped right and is out the door. Lol thanks for the vid
@davidwillette4213
Жыл бұрын
Great video dude, thanks for the information. I’m gonna give your channel a follow. Ideally I want the green one with the option to have solar charging as a back up. Holosun’s just always innovating like crazy
@artwebb6939
2 жыл бұрын
Interesting Unboxing and first shots videos are always cool
@willebiggz
2 жыл бұрын
Hey my friend. The torque setting is inch pounds and not foot pounds. Also blue loctite is not what you want to use. I’m fact you should remove any thread locker that comes on the factory screws. So you can apply your own. The correct thread locker you need is called vibra tite VC3. The problem with the blue stuff is that it dries and cracks over time. In addition if you have to loosen the screw for any reason once it is installed, the thread locker will no longer work. The vc3 is not the case. You can loosen and tighten the screw about 4-5 times before reapplication is Necessary
@MrTjones1987
2 жыл бұрын
Cleaning the lens on an enclosed emitter optic was so convenient and easy I got rid of most of my open emitters and got 509t's 😂
@JeremyRyanFit
2 жыл бұрын
Great info brother! On the waitlist for mine
@ddanj0331
2 жыл бұрын
Where is the waitlist available?
@stephen_crumley
2 жыл бұрын
@@ddanj0331 Kenzie’s optics, Big Tex ordnance, midway USA, primary and others. They have a backorder list
@audi_kid
Жыл бұрын
GREAT VIDEO 🤙🏼
@pdxmarine1430
2 жыл бұрын
For open emitter optics, instead of using qtips, I would recommend getting a cheap makeup brush off of Amazon, it doubles as a way to push out laser bullets that I use for dry fire practice Also, loving my EPS Carry so far, I haven't had to delint it a single time even though my 507k I was cleaning out just about every other day
@citizenresponse
2 жыл бұрын
Love to hear it
@ddanj0331
2 жыл бұрын
Where were you able to find one?
@pdxmarine1430
2 жыл бұрын
@@ddanj0331 got it through Kenzie Optics. Orderer it in June, got it in July
@ddanj0331
2 жыл бұрын
@@pdxmarine1430 thank you man!
@Rhynastyhorse
Жыл бұрын
I use a camera lens pen. So far the brush works great
@VincitOmniaVeritas7
Жыл бұрын
Looks great. I’m considering milling my original 365 for this optic.
@citizenresponse
Жыл бұрын
I actually broke it 😬 video coming soon
@jagpilotohio
Жыл бұрын
Get a can of compressed air to clean the optic of lint or the microfiber cloth that comes with the optic when it’s really dirty. Blast it right out. No Qtips. They’re abrasive.
@CT393
Жыл бұрын
I'm just waiting for 2 MOA green dots to come in stock and I'll probably swap to it from my swampfox that I've had for a while and am not particularly happy with.
@miles267
Жыл бұрын
Upgraded EDC from 507K X2 32 MOA circle and 2 MOA green dot to a EPS Carry 6 MOA green. Wish I had gone 6 MOA in first place. And closed emitter is so clear.
@tigerag29607
Жыл бұрын
closed emiters are the way.. my ccw has a 509t and i love it.. looking at this one for the wifey
@artalbarran8996
6 ай бұрын
Thanks for the info and awesome T-shirt! May I ask where you purchased it from? I will move to the land of the free called Texas soon but I want to rock that T-shirt now here in IL. Thanks.
@delariverside
10 ай бұрын
You should add a DPM Recoil Reduction Systems spring in your P365X. It significantly reduces recoil. I love mine.
@wade6523
Жыл бұрын
You'll notice a difference. I use 509t amd enclosed emitter is a game changer.
@xtrm.mayhem4098
Жыл бұрын
Was the eps carry only sent to content creator's? I've searched every online store I can think of (CH precision, BDU, Brownells, Amazon, ebay, buds gun shop, sportsman's warehouse, sportsman's guide, midway USA, primary arms, psa, optics planet, cheaper than dirt ( you get the picture) daily for weeks and I can't find any.
@TacticalN3rd
Жыл бұрын
Dude I run almost an identical setup to you down to the Enigma Express (sport belt’s a gamechanger) this video helps tremendously. Love my 407k but it is dirty constantly lol. Definitely gonna pick up one of these as an upgrade! Got a like & a sub from me brother 🙏🏼
@citizenresponse
Жыл бұрын
🙌🏻👊🏻
@uglydogg4995
Жыл бұрын
Hello Preston, I just wanted some advice on my situation. I carry a 43 with z9 mags and I am contemplating buying another edc. Would you recommend buying a 43x lower and s15 mags or should I just buy from a different manufacturer such as a p365, shield plus, etc. Godbless you!
@citizenresponse
Жыл бұрын
S15 aren’t reliable. I’d go stock 43x or the 365x
@therealbeast660
Жыл бұрын
My main reason for taking off the open emitter dot was cause I couldn't clean the damn thing easily, I shoot carry optics in uspsa and absolutely love having a dot on my carry gun but damn is it a bitch to clean. Can't wait to get that new new.
@citizenresponse
Жыл бұрын
It is much easier to keep clean
@Boomerfootball1
2 жыл бұрын
When using the phlster are you using the thigh strap? Keep up the videos!
@citizenresponse
2 жыл бұрын
Nope just the DCC clip
@RunningWithSauce
Жыл бұрын
I'm a huge fan of your concentration face when shooting hahah.
@XrayMike17plus1
Жыл бұрын
EPS carry model is currently hard to find in stock. Currently using an XL/ 507K-X2 and looking for an optic for an X-Macro.
@HOPSHARK
Жыл бұрын
what did you go with for the x macro?
@XrayMike17plus1
Жыл бұрын
@@HOPSHARK Tried and true 507K X2 this time time in green.
@Rob4Sang
Жыл бұрын
I like the fact that the EPS carry has the rear sight notch. Have you tried to shoot any targets using that notch on the sight and the front blade? Is your POI good enough that you would be able to use that notch sight if the dot fails?
@citizenresponse
Жыл бұрын
You could. I can hit c zone steel at 15-20 yards no issues with that method
@LovEyDuBB
Жыл бұрын
How well does the "rear sight" do as an iron sight?
@Go2Sleep87
Жыл бұрын
These look nice but the only difference I see from the 407k/507k is that it’s enclosed so you don’t have to clean your emitter glass so that’s a plus right off that bat but your also paying for that upgrade though. I got my 407k on sale for $175.99 out the door last year & at that price I don’t mind wiping my 407k emitter glass clean every now & again when it needs it 😆.
@SubBubz
Жыл бұрын
The point of a closed emitter optic is to protect the emitter from the enviorment & debris. Has nothing to do with the ease of cleaning, though that is a plus.
@Osprey1994
Жыл бұрын
Ease of cleaning is just a bonus.
@Dr.TonguePuncher
Жыл бұрын
I couldn’t get my eps carry to work on my sig p365 x macro with out the adapter plate. The stock screws were too short and the ones that came with the holosun bottomed out and wouldn’t tighten all the way.
@citizenresponse
Жыл бұрын
Hmm. Maybe I got a different one since I pre ordered?
@Ptro1
Жыл бұрын
Same thing. Did you figure this out
@johntrinidad4091
Жыл бұрын
Nice drawing all the time.
@BrandensOutdoorChannel
2 жыл бұрын
I pre-ordered the MRS Green EPS and EPS Carry direct from Holosun. Too bad it won't ship until another month or two. The 2 and 6 MOA versions don't have a solar panel. I demoed the MRS last Sunday for my channel. The 507k/407k cut are the same for EPS/EPS Carry. Best without a plate to get the lowest deck height. Purple Loctite 222 is the best for small screws. I'm carrying a 4" Performance Center Shield Plus.
@miles267
2 жыл бұрын
Does the Green MRS EPS Carry have a solar panel? Don’t think so.
@BrandensOutdoorChannel
2 жыл бұрын
@@miles267 Yes I demoed the Red MRS EPS Carry on my channel. The green and red MRS version will have solar-failsafe and auto brightness with 32/2 MOA circle dot combo.
@RunningWithSauce
Жыл бұрын
I live in the Minneapolis metro so I too carry daily. I bought a big bag of grass seed and was chucking it all over my lawn. I looked down at my appendix carry and the Holosun optic was full of seed hahahaha. Oops!
@totschopper
Жыл бұрын
Can confirm. Add more locktite
@SoulCrusher6
Жыл бұрын
Great video bro! What’s the verdict tho ????? I’m getting a p365X but don’t want the Sig optic after looking at bad reviews
@citizenresponse
Жыл бұрын
I actually broke mine.
@SoulCrusher6
Жыл бұрын
@@citizenresponse damn. So a different holosun model is a better choice
@citizenresponse
Жыл бұрын
@@SoulCrusher6 for now. 407k
@charleswtuggle
Жыл бұрын
I have 2 507Kx1 and I can't find an EPS Carry anywhere. But I am still looking.
@SATXrattlesnake
Жыл бұрын
Would this be too small for p320 m18?
@85bcole
Жыл бұрын
I have the p365x slide. Just got my eps carry from C&H. The screws that came with the red dot are too long to mount the sight directly to the slide. There were 3 types of screws included only one set fits the p365. They will work but only while using the included plate it came with. Did you get different screws to direct mount?
@citizenresponse
Жыл бұрын
I used the screws that came with it and direct mounted to the 365x
@85bcole
Жыл бұрын
@@citizenresponse Great video...Thanks
@russdennis7026
Жыл бұрын
Damn dude where did you come from? New sub here. I can always tell a fake and you're not it. I'm still waiting on my Holosun Eps carry direct from Holosun. This will be my first enclosed RDS. I'm excited! My off duty is the Glock 43x mos and currently using the Holosun 407k Green 6 moa. I bought that just to get me by till the eps came in and I got to tell you I really like the Green over the red the more I shoot it. How about you?
@citizenresponse
Жыл бұрын
I’ve never shot a green dot before. I feel like the red pops a bit better against earthy tones but I’d have to give it a shot
@russdennis7026
Жыл бұрын
@@citizenresponse Try it and it will grow on you.
@sethrich5998
Жыл бұрын
Ditch the loctite and check out Vibra-Tite VC-3. You’ll never go back. Nice look at the optic.
@Jasondranoff
Жыл бұрын
What MOA size did you get? I run the 2 MOA MULTI REDICAL 509 on a bunch of guns but I'm getting a custom P365 XL COMP FDEZ WERX build done and I'm torn between red or green 2 MOA or 6 MOA dot.
@citizenresponse
Жыл бұрын
6moa
@denkdry
2 жыл бұрын
I’ve seen where these can co-witness with standard height sights because of the low deck. But how does it co-witness with the Sig front sight?
@citizenresponse
2 жыл бұрын
You can maybe see the top 1/3 of the front sight through the optic, direct mounted on the 365x slide.
@denkdry
2 жыл бұрын
@@citizenresponse Nice. The XL is a nice gun but the one thing I wanted was to be able to co-witness. The 407K didn't seem to offer as much of a co-witness. Have you run this on your 43X yet?
@citizenresponse
2 жыл бұрын
@@denkdry I have not
@joeflowers9084
2 жыл бұрын
Yeah. Sadly the "built-in" sights on the red dots have way too wide of a notch and are too low to be useable. But seeing the front sight in the right spot can help index the red dot. I have my EPS Carry on a CR920 and love the sights on that gun. Moving it to a 365XL to see how I like it on that.
@EarnestSmith-jm8qv
7 ай бұрын
Will the mounting screws that come with the Holosun EPS fit your P365x?
@johnck211
5 ай бұрын
same question.
@potatoespotatoes1358
Жыл бұрын
Now that it's been almost two months: How has the difference been in dust accumulation?
@citizenresponse
Жыл бұрын
Night and day. Not even comparable
@tynado1173
2 жыл бұрын
Where did you find it? I've been looking for one for months and it says coming soon on most sites
@citizenresponse
2 жыл бұрын
Pre ordered from chpws a while back
@cqc2238
Жыл бұрын
I’m having a hard time and hope someone can help. I’m attempting to mount an EPS carry on a p365XL Spectre Comp with no plate. The included fasteners from Holosun have shoulders that are too long to run on the gun without the plate. They bottom out before the optic is locked down. I contacted holosun, they were zero help. Called sig, zero help. Bought M3x12 countersunk machine screws and torqued properly. The optic moves even though the fasteners are torqued and not moving. It’s almost like it needs the shoulders on the Holosun fasteners. CR how did you direct mount without the plate (assuming the xl365 SC uses the same setup)?
@brians785
Жыл бұрын
Having same issue . Did you find a solution ?
@cqc2238
Жыл бұрын
@@brians785 I went to a local fastener supply place. Very large and sells everything and bought 2, m3-.5x12 torx screws. I torqued them to 12 inch lbs and they are holding.
@85bcole
Жыл бұрын
Having same issue...Find out anything?
@scottbonnell23
2 жыл бұрын
No worries, it’s pre-zeroed. Hostage shot approved! 🤣
@formalistick
2 жыл бұрын
How’s the recoil on your 365x? And how does it compare to the 43x?
@citizenresponse
2 жыл бұрын
I dig it a lot. Recoil is very tame.
@kfranklin308
2 жыл бұрын
Just of off your first shots do you like it better than the 407/507?
@citizenresponse
2 жыл бұрын
407k is my go to recommendation since I’ve beat the crap out of it and it’s held strong. I think this will be great I just don’t have enough time behind it yet
@kfranklin308
2 жыл бұрын
@@citizenresponse yea I understand. I currently run the 407 and absolutely love it. I just hate how it stays dirty like you mentioned. I have been eyeballing the eps just because of that reason. That’s really the only benefit I see over the 407.
@citizenresponse
2 жыл бұрын
@@kfranklin308 yeah man. I think it’s gonna be a home run overall. Time will tell
@kfranklin308
2 жыл бұрын
@@citizenresponse yea I have high hopes for it. If the durability is on par with the 407 then it will definitely be great.
@xDeVeYx
2 жыл бұрын
Are you carrying the sig over the Glock all the time now? Do you shoot it as well?
@citizenresponse
2 жыл бұрын
Currently full time testing the sig for a few weeks. It shoots extremely well for how small it is. Review coming in the near future
@dt7037
Жыл бұрын
We’re you able to mount with provided Holosun screws?
@Chris-qy3dp
6 ай бұрын
Yes, they give you 3 sets of screws of different width/length. One of them fit my 365XL perfect. Two didn’t work.
@Keep_It_Loaded
2 жыл бұрын
🤙🏼
@llosttprophett
Жыл бұрын
One question, does the Red Dot come with a 32 MOA Circle? or only with the 2 MOA dot?
@citizenresponse
Жыл бұрын
I got the 6moa version
@josiahb55
Жыл бұрын
Do you get any useable cowitness with the Sig standard irons sights and the eps carry?
@citizenresponse
Жыл бұрын
Maybe the top 1/3 of the sight.
@josiahb55
Жыл бұрын
@@citizenresponse Thanks for the response. Do you get that lower 1/3 cowitness with the 407 or is the eps carry sitting lower?
@citizenresponse
Жыл бұрын
@@josiahb55 it’s the same with both
@MrWTFShane
2 жыл бұрын
2:28 my optic doesn't depend on my life.
@indicastrain4127
2 жыл бұрын
You gonna give that Alias Beltless a go?
@citizenresponse
2 жыл бұрын
Probably not.
@ddanj0331
2 жыл бұрын
Where is the best place to preorder or sign up for stock notifications?
@citizenresponse
2 жыл бұрын
I got mine from chpws
@ddanj0331
2 жыл бұрын
@@citizenresponse Roger thank you. How long did you personally wait for it to ship out while on preorder?
@citizenresponse
2 жыл бұрын
@@ddanj0331 3-4 weeks
@ddanj0331
2 жыл бұрын
@@citizenresponse thanks man. Ordered a enigma light bearing setup inspired from your recommendations… can’t wait to run it as my daily
@georgegould667
Жыл бұрын
Does the EPS come in green dot for 365 XL
@citizenresponse
Жыл бұрын
Yes
@andrewlucas8157
2 жыл бұрын
I’ve been thinking about getting the xl, have you had any problems with it? What kind of Ammo have you ran through it?
@citizenresponse
2 жыл бұрын
About 500 through it so far. Mix of Tula, magtech, and my carry rounds. Not a hiccup so far
@xempath
Жыл бұрын
whats the size of this thing compared to the 507k? on the gun? similar?
@citizenresponse
Жыл бұрын
Basically the same. The tiniest bit wider but it runs on the same footprint
@xempath
Жыл бұрын
@@citizenresponse thanks, Man 2 months later I still can't get my hands on one. What holster you rockin in this vid? I bought my first holster and trying appendix and bro Idk how people do it? I gotta lose my gut or I'm doing something wrong, I don't have a huge gut but enough fat there to bug the shit out of me with a holstered gun there.
@citizenresponse
Жыл бұрын
@@xempath phlster skeleton with DCC clip
@xempath
Жыл бұрын
@@citizenresponse I was looking at the enigma noticed the express comes with that holster. I am new to carrying and also have a p365x. Is that setup comfortable? I am a bit confused since the enigma is the belt basically. Are you just cliping the enigma to the inside of your pants? Lastly did you grab the 6moa or mrs version? thanks dude!
@robsheppard5353
Жыл бұрын
Please use Loctite 243, not 242. Both are blue. Yes, it matters.
@Pmedic605
2 жыл бұрын
You've got many watchers stripping out their slide screw holes because you said 15 FOOT pounds. It's INCH pounds. INCH pounds! 😝
@citizenresponse
2 жыл бұрын
I know haha I misspoke
@wetfuego6331
2 жыл бұрын
Is the window any bigger than the 407k?
@citizenresponse
2 жыл бұрын
No
@wetfuego6331
2 жыл бұрын
@@citizenresponse Thanks for the response. Impulsively ordered an EPS Carry last night thinking it had a slightly larger window than the 407k. Oh well, hopefully it's a solid optic.
@citizenresponse
2 жыл бұрын
@@wetfuego6331 you won’t regret it. Worst case you can probably resell it for a profit
@cloudzzgaming7260
Жыл бұрын
Hey man where did you get this?
@citizenresponse
Жыл бұрын
Chpws pre order
@cloudzzgaming7260
Жыл бұрын
@@citizenresponse thanks man! How did you already get yours? And how long does pre order take
@citizenresponse
Жыл бұрын
@@cloudzzgaming7260 pre ordered a month before they came out
@OctaneAndAmmo
Жыл бұрын
Is the window size the same as the K?
@citizenresponse
Жыл бұрын
Maybe a tad bit more narrow.
@OctaneAndAmmo
Жыл бұрын
@@citizenresponse thanks!
@tsomers01
2 жыл бұрын
15ft lbs. or 15 inch lbs.?
@citizenresponse
2 жыл бұрын
Inch
@rogerstegall6021
2 жыл бұрын
What holster was that?
@citizenresponse
2 жыл бұрын
Phlster enigma express
@Osprey1994
Жыл бұрын
I 0 at 10 and it lets me hit at 100 on a man sized target without much issue
@Tacteyecool
2 жыл бұрын
You like sig or 43x better?
@citizenresponse
2 жыл бұрын
More to come in the future
@Tacteyecool
Жыл бұрын
@@citizenresponse any ETA 😂🙃
@joshdoe7288
8 ай бұрын
You look both 14 and 45 at the same time.
@daviddavis1858
Жыл бұрын
I love you as God ask me to brother I am waiting for a bit to put this on my wife’s 365 x don’t stop playing it is original anyone ho gives you the biz is not worth sacrificing your faith anyway thanks
@mattysee24
Жыл бұрын
Lol why do u make that face when shooting? God, do I make that face when shooting?
@leadfarmer5035
Жыл бұрын
Inch pounds bro
@citizenresponse
Жыл бұрын
Yep
@steemerxaxon1643
2 жыл бұрын
That's EXACTLY why I have NEVER or will NEVER fall for the innovative stuff that comes out & EVERYONE & their ancestry makes a video about it.. I wouldn't depend on ANYTHING under a 4//5 period out in the shooters hands
@CartmanSRK
Жыл бұрын
Get your thumb away from the slide. Place it on the frame. You will cause a stove or a failure to feed.
@citizenresponse
Жыл бұрын
Lol
@toddparsons2980
Жыл бұрын
My FAT wrench is in inch pounds.
@citizenresponse
Жыл бұрын
Yeah that’s what I meant to say
@jeffmurphy9987
Жыл бұрын
DO NOT ENTER RED LOCKTITE!!!!
@robertb6768
9 ай бұрын
You are reholstering far too fast and casually for an appendix carried pistol. Reholstering needs to be very slow and deliberate with appendix carry.
Пікірлер: 161