In this video, we look at the 4 Holset models we currently stock and the expectation for installing all of them in your custom build. Visit us at www.BenzForce.com
I use to be a fan of garrett. I got to looking at the way holset was built and i immediately was going towards the holsets.
@BenzForce
5 жыл бұрын
The value is hard to overlook.
@prestonradde6165
3 жыл бұрын
super informative video, thanks for your expertise.
@MrRjnr
3 жыл бұрын
So on the HX30, for an OM617, is the spacer absolutely necessary? Is it included with the unit?
@Will_14_years_ago
3 жыл бұрын
I am looking to power a stock 79 300d with less than 100k on it. Juat want a little more power not looking to blow the tires off. It's an n/a 617.
@Will_14_years_ago
3 жыл бұрын
My a/c sits on the passenger side u.s. spec it has been converted 134 compressor. Will I be able to bt this up without modification?
@sukhrajmaan2176
4 жыл бұрын
I want to use for jhondeere tactor which could be best hx30 or hx25
@insane3375
5 жыл бұрын
What can you tell about HOLSET HE250WG ? Thanks in advance
@BenzForce
5 жыл бұрын
If I am being a salesman, I know more than anyone. But ... if I am being honest, I dont know anything about it. I really wish I could find reliable holset compressor maps and product information. It would greatly reduce the guessing. Holset's primary market is the OEM but they have to be aware of the huge aftermarket following ... maybe they feel publishing data will put them at an OEM competitive disadvantage.
@fintrenery2439
3 жыл бұрын
So I’ve got to the point where I’m ready for a turbo, it’s a 275hp build, would you recommend the hx30 or He221w ?
@luiscarlosrojasmeneghel3675
2 жыл бұрын
Prefiero hx25w xq lo sentí mas para mi uso que un 30 que es mas para carretera
@fintrenery2439
3 жыл бұрын
is that the HE221W or just standard HE221, and how much HP/Boost are they rated for ?
@BenzForce
3 жыл бұрын
I have standardized all holset adapters I sell to 2.5"
@fayobam_mech_tronics
5 жыл бұрын
Are these the only 4 turbos u sell, can you get them with a different turbine housing? Thanks for stocking these wonderful snails
@BenzForce
5 жыл бұрын
Yeah I have access to most of the holsets manufactured in China. If you email me an assembly number or the details of what you want I can provide pricing. Just use the contact us form on BenzForce.com
@dc440-4
3 жыл бұрын
@@BenzForce china! Wtf? no way I'd buy one
@angusmckenzie2413
4 жыл бұрын
Thanks for the informative video. Which turbo would you recommend for om605 + 7.5mm mechanical pump? looking for around 300hp + As you mention, daily drivability is key so had thought along the lines of the faster spooling HY35w? Thanks
@BenzForce
4 жыл бұрын
Honestly, I would consider an HY35, like an HX35 but a 9cm2 housing. I have not found out which plant those are manufactured at so I don't have a supplier. Another awesome option is the BorgWarner s200sx-e with an AGP housing. www.benzforce.com/collections/borgwarner/products/borgwarner-12769095003-bwa-airwerks-supercores. The housing on that turbo is sold separately and the smaller AGP Turbo .63 housing would make a great off the line driver
@luiscarlosrojasmeneghel3675
2 жыл бұрын
Faster spool seria con hx25w ese si carga rapido y te mantiene 15psi tranqui
@daviddroescher
4 жыл бұрын
Is it a marmon flange.
@BenzForce
4 жыл бұрын
No. It wont fit a BW if that is why you ask
@daviddroescher
4 жыл бұрын
@@BenzForce Marmon flange = tapered V band a generic term that dates back before the car. if it was the marmon flang you wound up with like I did theas are fixable just take it it flat like ahead gasket. Worked on my USA holset.
@BenzForce
4 жыл бұрын
@@daviddroescher When most people contact me about marmon flanges, they mean this: www.benzforce.com/products/vibrant-stainless-steel-turbo-discharge-flange-marmon-style-borg-warner-s-series-t4?_pos=2&_sid=87ea2e37e&_ss=r. Mine are matched to the opposing Holset flange as the thinner BW style will not work. We tried to match the profile.
@daviddroescher
4 жыл бұрын
@@BenzForce yes that is the marman flange mate to my hx35 from a 5.9l Cummins out of a MT45 Fraightliner ,cummins PN 3527758. As I said, I ground then filed the taper on the housing adapter flat and matched the thickness to the V band and the hx35 v band to hx40 V band adapter CNCed to work with the dodge rear plate. Had to take off a proximately 3/16. Because like you said it's too thick. And has no sealing surface to speak of when used with a standard flat V band.
@Kaegis
3 жыл бұрын
Metered fitting to equal 150ml of oil over 15 seconds through the turbo.
@jasonbirch1182
5 жыл бұрын
CUMMINS! NO G IN THERE. if you are selling diesel related parts and saying Cummings you sound like a dope. It will make me question if you know what your talking about or reading a script.
@BenzForce
5 жыл бұрын
A script, lol. No script and some parts are genuine cummins. Others are DCEC, a joint venture with cummins. If I pronounced the G then shame on me, I will work on that :)
@Trlhound
4 жыл бұрын
jason birch spot on sir was thinking the same thing
Пікірлер: 30