Great job, thanks for commenting on bits and pieces as how to clean pistons with sandpaper.
@MyGarage-ll8tx
Ай бұрын
Oh, by the way. When polishing the pistons with sandpaper you could jerryrig an adapter to a drill to fasten the pistons to it. That way you can just hold the sandpaper to the piston and wroom wroom! :D
@998RC
10 ай бұрын
Thanks for the video! It really helped to prepare us for what to expect when disassembling the SMC and reassemble with a Honda SMC rebuild kit. We couldn't get the piston to budge with a rubber mallet, so we used compressed air to blow it out just like you did for the filter. The inside was the opposite of yours - the bore was perfect, but the flat surface that the circlip seals against looked corroded but felt smooth, so we just sprayed it down with brake cleaner and reassembled with the new parts. The piston moved freely and even popped itself out if we pressed it in too far. Reinstalling the circlip was the hardest part.
@MyGarage-ll8tx
10 ай бұрын
Awesome! Glad the video helped. :)
@dagnabitification
6 ай бұрын
Change that brake fluid every 12000 miles or 2 years which ever comes first.
@MyGarage-ll8tx
Ай бұрын
Yup! That`s roughly 20 000km to us metric people! ;D
@user-xi3bf7fx7v
9 ай бұрын
Good job cleaning it out . My piston was out of round causing binding . Buy a rebuild kit and get the entire piston assy.
@MyGarage-ll8tx
9 ай бұрын
Yes, you can find all matters of binding issues with this thing. The reason I did my repair the way I did was that I could not get my hands on a repair kit.
@richardjeun
Ай бұрын
Did cleaning the bracket parts solve the rear brake dragging problem?
@MyGarage-ll8tx
Ай бұрын
Well.. I did more than just clean the bracket parts. I also gave the rear brake caliper some much needed TLC. But the bracket parts were completely stuck on my bike, so yes. It works now. :) You will always have some contact between the disc and the pads, but the drag is at a "normal" level now.
@herisafrudin7626
9 ай бұрын
Mister tolong bantu saya motor honda st1300 A9 mesin tidak bisa hidup...fullpum dan coil tidak aktif
@MyGarage-ll8tx
Ай бұрын
Hey there! If I understand you correctly you have no power to the fuel pump? Checked fuses?
Пікірлер: 12