Subscribed. Such excellent instruction. Clear, Concise, Relevant, Just Perfect!
@fieldtechacademy
5 ай бұрын
Wow. Thank you for that. I worked very hard to edit the video down to the core points.
@leonscottkennedy30
2 ай бұрын
Thank you so much. This video is exactly what I needed.
@fieldtechacademy
2 ай бұрын
@@leonscottkennedy30 sweet! I love to hear it!
@knollis01
6 ай бұрын
What a gem your profile is !
@fieldtechacademy
6 ай бұрын
Thank you. What has helped you the most?
@TheTomar33
3 ай бұрын
Excellent instructions this help a lot in troubleshooting wiring issues. Thanks for making the video.
@fieldtechacademy
3 ай бұрын
Glad it helps. Thanks for taking the time to comment.
@jamesodell4453
2 ай бұрын
Great video. Thanks for the training on this.
@fieldtechacademy
2 ай бұрын
@@jamesodell4453 you bet!
@justanotherguy6359
7 ай бұрын
Great video, very helpful info, appreciate you putting the effort into this! Helped me understand how these lines are working as I just inherited quite a bit of this infrastructure at a new job.
@fieldtechacademy
7 ай бұрын
I'm glad to hear that! Thank you for commenting.
@DJ29Joesph
4 ай бұрын
The video i needed. Thank You!
@fieldtechacademy
4 ай бұрын
Love to hear that! Thanks!
@Luvboimusic
24 күн бұрын
Thanks you sir
@fieldtechacademy
24 күн бұрын
You're welcome. Thank you for taking the time to comment.
@s.boulware73
10 ай бұрын
Great info
@fieldtechacademy
10 ай бұрын
Thank you! I hope it helps people.
@benjaminwexler1420
Күн бұрын
I'm looking for videos explaining analog speaker systems and 66 block? I have a speaker system where my speakers are plugged in to 4 plugs(tip,ring,24v,gnd)
@fieldtechacademy
Күн бұрын
Wow. I have never heard of running a speaker system through a 66 block. I don't know that I can help on that one sorry. I know just enough to get myself in trouble lol.
@benjaminwexler1420
Күн бұрын
@@fieldtechacademy I didn't run it.. I just inherited it 😂
@binwoods23
9 ай бұрын
Thank you for the video. I have a question about the bridge clips. If you don’t have any could you just use a small piece of wire to jump the single over with?
@fieldtechacademy
9 ай бұрын
Well it might work in a pinch but I wouldn't as a rule. Bridge clips are so cheap on Amazon or even locally at Graybar, etc.
@cleveanderson1235
3 ай бұрын
Thank you I’m trying to troubleshoot a avaya phone system at house where remodeling I think a line was cut got power to phones but. I no dial tone
@fieldtechacademy
3 ай бұрын
Digital phone systems behave differently. You may not be able to get dial tone with a buttset. I would check the dial tone feeding into the Avaya to ensure you have an active line there. If you have dial tone to the system and the phones power up, but no phones on any extension will get dial tone, then there might be an issue with the system itself. Obviously, do the old "pull power and reboot" trick. If that doesn't work, pull power and re-seat all the internal cars. If it still doesn't work, unfortunately at that point, it's beyond my experience. Maybe one of the community here or Reddit can offer some further guidance.
@Protobeans69
15 күн бұрын
So they're essentially like patch panels but for phone systems?
@fieldtechacademy
14 күн бұрын
That's a good way to look at it. They are just not as clearly defined as a network patch panel so it's a lot more confusing for new phone techs. Bottom line is 1 pair / 2 conductors = 1 phone line / signal.
@victorcarreras2499
6 ай бұрын
Still using those R66
@fieldtechacademy
6 ай бұрын
There are still some around!
@iTechnologiesGhana-gj8fv
5 ай бұрын
After watching several videos i'm still having a hard time understanding the 66 0r 110 blocks and what it does with the PBX. Can you just wire up 16 wires from 16 rooms straight to a 16EXT PBX without any problems?
@fieldtechacademy
5 ай бұрын
I'm going to be honest, I am not an expert on old school PBX systems. Here are a couple of things that I believe are true... A PBX system doesn't send a standard POTS signal to the 66 block. It sends a data and power signal to each extension so if you try to tone a jack, it's going to tone on the entire block because they are all interconnected. Typically you can't put a butt set on a PBX block to check for dial tone because it is sending a PBX signal to the block instead of a Tip and Ring signal. Wiring the extension on the block and on the jack is going to be specific to the PBX system. It may use one pair or two pair. It all depends on the brand and type of system. The bottom line is whatever pairs it's using are sending the data and power signals on the same pair or split between two pairs. Look at an existing extension that is working, and duplicate it for repairing, adding new, or replacing extensions. Hopefully, someone in the community will see your message and give you better information than I can.
@DANIELSANCHEZ-gk7jq
Ай бұрын
Why do they daisy chain ????😢😢😢😢
@aslamSopno
2 ай бұрын
Hello sir i am SEO expert i can help you for growth your channel views and subs.
Пікірлер: 36