I'm often shocked to find out how few people know how a water softener works! Watch this and you'll know!
@MagnumGreenPanther
8 ай бұрын
Hey Gary, I installed a new water softener. Ever since I installed it my water pressure starts out fine but over a few hours it will diminish down to a trickle. I can quickly flip the bypass on and back off and the pressure returns to normal and then will slowly start to diminish again. Any ideas?
@dreerd123
2 ай бұрын
I have a Halo water system but I don't see a brine tank , what does that mean? I don't think this system I have works I still have hard water , I purchased the house with this system .
@miner3993
Ай бұрын
@@GarytheWaterGuy cool thanks I will watch it 👍 Thanks for all your help. Love your videos. They're so much help 👍👍
@gregwardecke
23 күн бұрын
Well I was one of them! Moved from a house with city water to a rural house with a well and an AO Smith softener. Thanks to your great explanation I now know what that running water is all about in the middle of the night. Thanks for the helpful video!
@thelittlerustictylerlittle673
2 ай бұрын
Gary, thank you for the info. Do you have a video or tips for getting a water softener up and running after it has been sitting idle for several years?
@GarytheWaterGuy
2 ай бұрын
Make sure the brine tank is 1/2 full of new salt, add 3 gallons of water and media cleaner waterestore.com/products/pro-res-care-water-softener-resin-cleaner to brine tank and then regenerate twice, 8 hours apart. You might get some brown water for a day or two but it will go away.
@ab5cafredwilson896
2 ай бұрын
I always wonder how they worked. THX
@GarytheWaterGuy
2 ай бұрын
You're welcome. Please share video with friends and family
@cf-sc
16 күн бұрын
Forgive the ignorance, but are there all in one tanks that serve both as a water heater and a softener, or is it 2 separate things that need to be installed. How do smaller spaces/homes do it?
@GarytheWaterGuy
16 күн бұрын
2 Separate things, each has it's own finction. We have water softeners here waterestore.com/collections/water-softener-1?pf_pt_product_type=System
@back2basics668
3 ай бұрын
HOw long do media tanks last before you need a new one?
@sickofgreyhats
8 ай бұрын
Thank you sir for all the great information. ALL MY JOINTS HURT from fluoride and other poisonous heavy metals. Please tell us what a distiller does to flouridated water. Should I drink Aquafina or distilled water with Trace Minerals? PLEASE HELP. MY JOINTS HURT AT 50.
@GarytheWaterGuy
8 ай бұрын
Yes, Aquafina or Dasani, are a great choice for bottled water. Or you can go with a Reverse Osmosis drinking water system like I use for my family waterestore.com/products/hum-water-saver-reverse-osmosis-system-75-gallons-per-day
@aurorasigala3450
Ай бұрын
Do u have a video on this?
@timk.9827
8 ай бұрын
Thanks Gary always good info.
@GarytheWaterGuy
8 ай бұрын
Thanks for watching. Please share video with friends and family.
@angelakarlamartinez
4 ай бұрын
Hi Gary I wanted to ask if the bypass valve should be parallel or perpendicular to the pipes
@GarytheWaterGuy
4 ай бұрын
perpendicular is bypassed.
@natesambo9759
5 ай бұрын
Great video. Is there any reason the resin would be getting out into our water lines? I've found quite a few faucets where the resin balls are clogging up the screens on the faucets. Maybe the riser tube is letting them through?
@GarytheWaterGuy
5 ай бұрын
Yes, likely the riser tube or the baskets at the top and bottom of the riser have let go and are allowing the media to escape.
@natesambo9759
5 ай бұрын
@@GarytheWaterGuy I have an old Turbosoft from around 2010 I've disassembled with the help of your videos, really not bad, just a little messy. It only had a bottom basket, no top basket, which seems odd, but apparently it came that way. Not sure if that's "normal" or not. The lower basket doesn't look that bad, but I'm replacing it anyway. Probably need to replace the media too at this point. I can't find much about Turbosoft anymore, must have been discontinued.
@GarytheWaterGuy
5 ай бұрын
The riser tube in those is called a trubulator. They were quite fussy so we and I don't think too many others use them any more. Yes, there shuld have been a top basket.
@natesambo9759
5 ай бұрын
@@GarytheWaterGuy well replacing the basket with a new one fixed it for now, but perhaps not having a top basket on these is a design flaw. Still softens the water quite nicely. If I can get 5-10 more years I’ll change out the bio resin, or maybe then look into a new one. Thanks for your awesome videos though people like you who do these tutorials, make KZitem great!
@tylermcgurry7579
2 ай бұрын
Hi Gary, you mentioned that it usually goes off at 2am, ours is at 3:15 am. We just moved into our new home, the only issue is our sump pump seems to kick in when this happens for nearly 45 minutes and keeps my wife awake since it is very noises and under the bedroom floor. Is it an issue if we change the time to 9am rather than middle of the night? I assume it’s middle of the night as people likely will not be using water then?
@GarytheWaterGuy
2 ай бұрын
Yes, 9 am is no problem just make sure that no one uses large amounts of water for laundry or showering until 11 am.
@mwindischable
3 ай бұрын
My brine stage is set to 60 minutes. During this time I see the brine solution goes down but the brine is siphoned off sooner than 60 minutes so I kept adding water with the hose. So does there have to be enough water in brine tank to run for 60 minutes? That seems like a lot of water especially if brine tank is full of salt (less water).
@GarytheWaterGuy
2 ай бұрын
That's normal. After the brine is gone it just becomes a slow rinse, no need to add water with the hose.
@miner3993
Ай бұрын
If I install a water softener in my home and I use the water from the water softener to wash my car will it leave water spots if I don't dry it with the towel if I use a water if I install a water softener and wash my car and not use a towel to dry my car. Iwii I get watersports on my cay. Or what do I need to be about to wash my car and not have to use a towel to dru
@GarytheWaterGuy
Ай бұрын
You will still get some spots on your car if you use softened water. I use softened water and this video details how I dry my car kzitem.info/news/bejne/kaFt2oZmsp9nZ3osi=oSU15_JcjLepJz4X
@memphis550
4 ай бұрын
I’m stuck my brine tank is not getting filled any suggestions
@GarytheWaterGuy
4 ай бұрын
I would review and implement the ideas from this video kzitem.info/news/bejne/wK2pnmyIfGt8jKA
@benefieldharcourt8276
7 ай бұрын
Is it possible during the brine cycle the brine is bypassing the media tank and go directly to drain. During my cycle (cycling as it should) there is a continued heavy flow to the drain. My water still does not have silky to touch soft water. Is the brine being diverted to drain and not entering the media tank? Brine 70 min. At 55 minutes brine tube sucked out but continued to have a heavy flow of drain water. I’ve captured 12- 20 litre pails. Salt, water is correct. I would think during the brine tank emptying there would be no flow.
@GarytheWaterGuy
7 ай бұрын
It is possible but unlikely. There needs to be flow to the drain thoughout the brine cycle since it needs that flow to create the suction through the venturi (injector) to be able to suck out the brine. The "Hevay Flow" during the brine cycle is a concern. You may need to rebuild the valve. Check out this video kzitem.infohXcQ7qCxvjY
@andreykoroluyk9182
6 ай бұрын
I’m installed softener but is a salt tank is still no water in it and I should wait cleanup cycle or I should do manually?
@GarytheWaterGuy
6 ай бұрын
When installing you need to add 5 gallons of water before the first regen.
@rajnepali1660
Ай бұрын
Play at 0.75 speed 😂 thank you for the information. Super informative
@GarytheWaterGuy
Ай бұрын
Thanks for watching! Please share video with friends and family.
@mafyind
21 күн бұрын
@@rajnepali1660 Thank you! Most valuable piece of info in the last 2:43 👍🏻
@MohitSharma-pl2bh
Ай бұрын
Hi Gary I have a Viqua water softener. When I manually trigger regeneration by pressing and holding the REGEN button, the motor starts and the first message I see on screen is 'Fill' which lasts about 6-7 mins. This then turns into Softening which shows close to 4 hours. During Fill, I do not see any water getting transferred to the brine tank through the tube connected to the media tank. The softener is only an year old, any idea what might be going on? Could it be a blocked injector? Thanks!
@GarytheWaterGuy
Ай бұрын
Definitely somethign wrong as there should be water flowing into the brine tank for the full 6-7 minutes. Not the injector, but the brine line flow control (BLFC) could be blocked. I'd check there first.
@lonewolf4827
3 ай бұрын
Hi Gary, appreciate your videos. Im trying to troubleshoot my at least 15 year old fleck 5600 econominder thats not really softening the water very well. I replaced the resin last year and that didn't seem to help. I'm wondering, could the (never been replaced) brine valve and or piston and seals somehow be the culprit? I'm wondering if either of those assemblies could possibly be leaking untreated water into the resin tank. Id br happy to provide pictures of the piston though a dropbox link if you'd like, it has some substantial pitting in places. Kinda stumped down here in Florida my friend, any help would be greatly appreciated. Also, the Injector nozzle and injector throat are clear of any obstructions. water hardness is 14, resin tank is clack 8X44
@GarytheWaterGuy
3 ай бұрын
I really know very little about Fleck products including the 5600. If yours is metered, I would confirm if the meter works. Other than that, this troubleshooting video might help kzitem.infoLr3jyGiJdC0
@lonewolf4827
3 ай бұрын
@GarytheWaterGuy thanks for the prompt response my friend. At 30:50 in the video you began to explain what happens if water flows past the spacer stack but didn't finish your thought...can you please provide a little more detail on what can happen in that scenario? Thanks, Tim
@12riveradavid
7 ай бұрын
Hey Gary Recently had a clack softener installed in my home. The system is consuming salt but not softening the water in my home as per the water tests. I replaced the float valve and motherboard and hasn’t resolved. The system is less than a year old. What could issue be? Thanks in advance
@GarytheWaterGuy
7 ай бұрын
For sure the water from the location where you are testing the water from actually goes through the water softener? When you run water at that location does the word "Softening" flash on the screen?
@12riveradavid
7 ай бұрын
@@GarytheWaterGuy After taking a look at the plumbing, apart of my home isnt going through the softener, thanks again Gary!
@Wrecked01
Ай бұрын
What happens if someone flushes the toilet in the middle of the night when it's going through its process?
@GarytheWaterGuy
28 күн бұрын
Nothing at all happens, everything works exactly the same.
Пікірлер: 49