I have a 50 year old 89 Taper Wahl clipper that had not been used for many years. It made a horrible loud noise with the teeth not moving. I followed your step by step instructions and was able to align the teeth and get it working again . Thank you for your simple instructions step by step close ups. I think you saved me from buying a new one.
@KrimsonKiwi
Жыл бұрын
Thank you so much for your video. You just saved me about an hour of fiddling and cursing, and saved my family having to deal with a grumpy dad as a result of it.
@lmbpros
Жыл бұрын
Thank you for taking time to leave a comment! Really appreciated. Glad it helps out a bit! Cheers
@JosephLopez-rk1we
Жыл бұрын
Hey man thank you so much for making this, I dropped my clippers by accident and the top came out. Because of this video I was able to able to put it back together
@lmbpros
Жыл бұрын
Thank you for the comment! Glad it helped you out a bit. Really appreciate for the comment! Made my day! Cheers
@MattOcean10
5 ай бұрын
Your video was way more helpful than the one from Wahl. Thanks for taking the time to share your expertise!
@lmbpros
5 ай бұрын
Thank you for the comments. Really made my day! Glad it helped out a bit. Cheers. Thanks also for taking time to watch and leave a comment!
@caspiana3623
4 жыл бұрын
Out of the three videos on zero-gaping Wahl clippers I watched this one is the best, both in close-up picture and explanation. Thank you!
@lmbpros
4 жыл бұрын
Thank you for watching! Really appreciate the comment. Cheers!
@TranOfficial
4 жыл бұрын
Everybody gangsta until he pulls out the Pokemon Go ruler
@danib9908
4 жыл бұрын
Bruh
@lmbpros
4 жыл бұрын
lol. Cheers! Yea, kinda regret that. I got a new generic ruler now. lolol
@BastardKitty
3 жыл бұрын
Hahaaaaa
@user-wickedflower
3 жыл бұрын
😂😂
@Itachily1
3 жыл бұрын
Lol I immediately scrolled to the comments when he whipped out that gem
@jonw8697
Жыл бұрын
only person online that actually shows thee orientation of both blades. my clippers disassembled while using them a moment ago and you helped me get it back together. appreciate you
@kitsand
29 күн бұрын
Had the hair pulling problem on my Wahl clippers. Watched this video, followed the steps and problem solved. ❤ Thank you for sharing this info.
@lmbpros
29 күн бұрын
Thank you for taking time to leave a comment. Really appreciate it. Glad it worked out about! Cheers!
@korakatar7921
3 жыл бұрын
Thank you so much! I thought my brand new clippers were blunt and useless and i was already shopping around for clippers 4 times as expensive and then happened to search and found this video. In 15 min my clippers were just cutting so fine! They had come with a gap of almost 2mm or more. Thanks once again from Mumbai, India.
@lmbpros
3 жыл бұрын
Thanks for watching! Really appreciate your comments and glad it helped!
@MrBlue12444
2 жыл бұрын
@@lmbpros why u didn't give heart for his comment
@deep_z
Жыл бұрын
which one did you buy?
@korakatar7921
Жыл бұрын
@@deep_z Kubra kb-309
@djk5876
Жыл бұрын
This expert detail is missing in other videos. 🎉 Super thanks for the help and advice.
@lmbpros
Жыл бұрын
Thank you very much. So appreciated. Thanks for taking time to watch and comment. I feel the same way too and wish more videos add just a bit more detail. Cheers
@kaitoshijo
2 жыл бұрын
This was a tremendous help! I always have a hard time shaving because of my curly hair. Even my hair clippers had a hard time. Took them apart and followed your instructions, then they went through my hair like a hot knife through butter.
@lmbpros
2 жыл бұрын
Thank you for your comment! Really appreciate that you took time to reply. Glad it help!
@gerdaiva
2 жыл бұрын
Thank you so so much for this video. I really couldn't figure it out why my clipper was buzzing this loud. I'm glad I found your video. Thank you!♥️
@lmbpros
2 жыл бұрын
Thank you for your comment! Glad it helped! Appreciate it!
@kierondec
2 жыл бұрын
Thank you, this is the best Wahl clipper adjustment video I've seen, easy and precise. I had taken my wahl apart to clean awhile ago and it never seemed to work right afterward, after watching this video and adjusting my clippers per instructions they cut better than when I purchased my clippers. Cut my hair in half the time as last time. Again, Thank you!
@lmbpros
2 жыл бұрын
Thank you very much for your comment. Thanks for taking time to write it. Really appreciate it. Cheers! Glad it helped out a bit
@joelwillems4081
3 жыл бұрын
Simplest and most useful Wahl razor adjusting video on youtube. Thanks!
@lmbpros
3 жыл бұрын
Thank you very much for your comment! Really appreciate it. So glad it worked out for you!
@Photoshoplilli
10 ай бұрын
thank you so much, my clipper wasn't trimming anything at all anymore but after your tutorial it's now cutting again
@lmbpros
10 ай бұрын
Thank you for taking time to write a comment! Really appreciate it! Glad it helped out a bit 🥰
@louwilk8764
2 жыл бұрын
Thank you so much for this video! I had taken my clippers apart to clean them, oiled and put back together. Then I tightened everything up ... and they didn't work anymore. Your video helped me figure out what I did wrong.
@lmbpros
2 жыл бұрын
Thank you for your comment! Really appreciate you took time to reply. Made my day! Glad it helped out a bit! Cheers
@joshuanavarro2734
2 жыл бұрын
Hey I did the same thing and now they don’t work can you tell me how what was wrong with it
@iceman100685
Ай бұрын
@@joshuanavarro2734did you ever figure out what you did wrong with your clippers🤔
@cluelessyukan5004
6 ай бұрын
Bro I've been sitting here for 2 hours tryna to get this to work only to realize that my blade was upside-down... Great tutorial man thanks a bunch!
@lmbpros
6 ай бұрын
Thank you for taking time to leave a comment! Really appreciate it. Glad it helped! Cheers
@TheFarmhouseMom
Жыл бұрын
Thank you so much! I was shaving a goat and dropped the clippers in the feed bucket. I took it apart and cleaned it out but it wouldn't work right after I did that. This got my clippers going and we are ready for the goat show now!
@lmbpros
Жыл бұрын
Thank you for taking time to comment! Appreciate it. Glad it helped out abit! Cheers!
@daviddavids8702
Жыл бұрын
😂😂
@RandleBond
3 жыл бұрын
Literally saved my clippers from being thrown out in frustration! With hairdressers closed in Melbourne under covid-19, I've become the family hair dresser. These are now going strong 17 years since purchase with no sharpening! 7 of those years were hopeless until I found your video 🙌🏻
@lmbpros
3 жыл бұрын
Thank you for your comment! Appreciate it! Glad it helped out. Also it took me forever to understand what 'zero-gap' was lol
@bgillies100
2 жыл бұрын
Did not show puting blades on
@greasylimpet3323
Жыл бұрын
Don't worry, we'll all be locked up again after the election...
@BastardKitty
3 жыл бұрын
Thank you so much! This is the first video I found that actually helped me. Now I can finally cut my dog’s hair again. He’s a Komondor...lots of hair :)
@lmbpros
3 жыл бұрын
Thank you for watching my video! Really appreciate your comment! Glad it helped out! I had to google 'Komondor'.... dayum... you'll definitely need a WAHL to cut through all that fur! hahaha Good luck! Cheers
@TheAGODAMI
2 жыл бұрын
@@lmbpros *I haVe thaT saMe eXacT cLippeRs modeL.! WouLd you mind bRoTheR doinG a video tuToRiaL on hoW to fiX and repaiR thaT "whiTe thinGy" aT the (**0:01** & **0:30** sec.) maRK.?! Mine feLL oFF and I haVe no idea hoW to reaTTaCh iT...!!?!!!!?* 😢 😠 🙏
@chrisphillips6571
3 жыл бұрын
Thank you for your great video. That helped me put my clippers back together after the screws fell out!
@lmbpros
3 жыл бұрын
Thank you for your comment! Really appreciate it! Glad it helped!
@georgebrown7318
3 жыл бұрын
Thank you for posting. I was struggling with those blades for a good while. Now my wife can finnish trimming my hair.
@lmbpros
3 жыл бұрын
Thank you for your comment! Really glad it worked out for you! Appreciate the comment and watching my video!
@RAGEMETHOD
2 жыл бұрын
My clippers weren't cutting. They were moving side to side but they weren't cutting. Aligning them like you said; right side of the blade on the fat part and the left side of the blade aligned with the 2nd thin triangle, and also pushing the blade "up" a bit closer to the edge fixed my problem. Thanks!
@lmbpros
2 жыл бұрын
Thank you for your comment and watching my video! Really appreciate it. Cheers
@eyeizmerry
2 жыл бұрын
Very helpful! I dropped my clippers and have never learned how to realign them! Thank you!
@lmbpros
2 жыл бұрын
Thank you! Really appreciate you taking time to write and comment! Glad it helps out a bit! Cheers
@TigerMusicDance
Жыл бұрын
I thought i already tried these steps... and I was just about to sell my clippers because I thought they needed repair and you helped me fix it between turning the dial and lining it up properly I can keep cutting my hair.
@lmbpros
Жыл бұрын
Wool! Glad it worked out. Cheers for the comment! Appreciate you taking to comment! Thx!
@greasylimpet3323
Жыл бұрын
Thank you very much for the video. My clippers were catching and dragging on my hair, obviously not cutting. I thought the blade was blunt, but it was out of alignment. Thanks to your video, they're fine again. 🇦🇺
@lmbpros
Жыл бұрын
Thank you for the comment! Appreciate it! Cheers
@TdSharp
6 ай бұрын
Thank you. I've got a sharpening business and will be doing clippers for a customer soon. I've sharpened my own with plenty of success, but none of the videos on sharpening them that I've found cover this important step
@lmbpros
6 ай бұрын
Thank you for your comment! Really appreciate it! Wish you the best for your business for 2024! Thanks for taking time to leave a comment. Cheers
@planecrazyish
3 жыл бұрын
Thanks buddy. Followed the steps exactly, all 100% , clippers are working great again.
@lmbpros
3 жыл бұрын
Thank you for watching! Appreciate the comment! Glad it helps!
@Kaycii.Austine
10 ай бұрын
Thanks man, I thought I lost my clipper when my son dropped it and the top blade shifted from its position and looking at afterwards, pulled it off. God bless you for this video.
@lmbpros
10 ай бұрын
Thank you for thanking time to leave a comment! Really appreciate it! Cheers! Glad it helped out a bit
@koreymiller26
Жыл бұрын
You just saved me from having to buy some new clippers. Thank you so much
@lmbpros
10 ай бұрын
Thank you for leaving a comment! Really appreciate it. Glad it helped out a bit!
@edkennard72
2 жыл бұрын
To repeat the same thing that's the last person said thank you so much for taking the time to make this video I was beside myself as to how that went back together and I was on the verge of drilling the holes bigger until I seen your video thank you very much for taking the time to do this you have a great day and I hope you have a great year ahead of you God bless you
@lmbpros
2 жыл бұрын
Thank you for your comment! Really appreciate you taking the time to comment! Glad you didn't drill your clippers! Lol. Happy cutting!
@alexpushilin6120
2 жыл бұрын
Thanks for the video! Turns out my clippers been out of tune for a while already, now I get a really clean cut.
@lmbpros
2 жыл бұрын
Thank you for taking time to comment! Really appreciate it and glad it helped! Cheers
@TheCEPELE
Ай бұрын
just came here to appreciate your time. Helped me with my wahl 🎉 :)
@nyxphoenix6984
9 ай бұрын
Thank you for the Tutorial!. I had been struggling to cut my hair with a lot of tears..but now after follow the tutorial and it works without hurting my hair anymore.
@lmbpros
9 ай бұрын
Thank you for taking time to leave a comment! Really appreciate it. Glad it helped out a bit. Cheers!
@popdogfool
3 жыл бұрын
Thanks, that power adjust was just what solved my issue.
@lmbpros
3 жыл бұрын
Thank you for watching! Appreciate the comment! Cheers!
@mindcontrol67
2 жыл бұрын
Thanks for the video,Had my trimmer for years and recently its not been as good.Took off blades and was surprised at how much hair was caught inside.Taking it for a test run tonight.
@lmbpros
2 жыл бұрын
Thanks for watching! Good luck!
@isshinryu11
Жыл бұрын
Excellent video! Question, I've taken my wahl apart. The vibrating "arm" seems to be clacking against the shroud even with top cover off. If tilted, motor will even stop as it must be striking the lower shroud somewhere. Do you have any thoughts? I would hate to throw out $40 clippers for something mechanical. My clipper is exactly the same as the one on the left in screen at "0.07"- no spring. Thanks if you have the time to answer.
@Badvideoguy
2 жыл бұрын
Videos like this may not get a lot of views but I’m sure glad you posted it. Thanks
@lmbpros
2 жыл бұрын
Thank you for taking time to comment. Really appreciate it! Glad it helped out about. Cheers!
@tjwash5118
3 жыл бұрын
I’ve been a hairstylist for 20 years and have replaced many clipper blades but never knew to do any of this. Thank you!
@lmbpros
3 жыл бұрын
Thank you so much for this comment! It's such an honour to read this comment. Thanks again for watching! Appreciate it greatly
@smallbeans101
4 жыл бұрын
I cleaned my clippers but now my guards won't fit. The cutting blades touch the guards. Idk what to do
@markdierking9347
7 ай бұрын
excellent production. concise with great step by step commentary. thanks.
@lmbpros
7 ай бұрын
Thank you for taking time to leave a comment! Really appreciate it and it makes my day! Glad it helped out a bit!
@moskito5864
3 жыл бұрын
thanks, helped me a lot. After i sharpened the blade there was a problem, its fixed now and machine is working like a new one :)
@lmbpros
3 жыл бұрын
Cool! Glad the video helped out in some way. Appreciate your comment! Thanks!
@miguelenriquegarnicahernan3889
Жыл бұрын
Thanks for the vidéo. It is very helpful. I’m just wondering how to adjust my clipper to reduce vibration. My clipper has just an adjustment screw just next to the blades and I’m turning it trying to find the best adjustment but it keeps vibrating and my hand becomes numb. Do you have an advice to help me, please? Thanks in advance!
@KaskoOfficial
3 жыл бұрын
Im really strugglin with the black screw. I do everything same as you but at the end when its all done. Its loud, then i make it quiet same as ypu, but then the upper knives are too "right - >" positioned. Then when i cut hair i notice is not as good as it was before. Please help
@lmbpros
3 жыл бұрын
Hi Thanks for watching! Not sure what else I can add to what I've already said in the video. You'll just have to keep positioning the blades until it's just right using your sight/judgment. You also probably know that when you tighten the screws back in place, the blades will move. It's just a matter of keep doing it 'til you you get it in the right position. Getting the screws in with just the right amount of tightness is another thing to consider Sorry if Im not helpful. Hope you get it right.
@itsZombieMan
Жыл бұрын
How come your bottom blade spring doesn’t pop up? On my clippers my bottom blade spring does, which makes zero gapping hard to do because I have to hold down the bottom blade while trying to align it with the top. How are you keeping the tension on your bottom blade?
@DV1979
Жыл бұрын
Same question
@joenewman5226
4 жыл бұрын
New to barbering so been struggling with this for a while. Very well explained i managed to do it first try, thank you!!
@lmbpros
4 жыл бұрын
Thank you for watching! Really appreciate the comment. Cheers! Good luck with the barbering!
@willevans9245
11 ай бұрын
Thank you for this!! I thought mine was broken!! :)
@lmbpros
11 ай бұрын
Thank you for taking time to comment! Really appreciate it. Glad it helped a bit! Cheers!
@lad4444
3 жыл бұрын
I dropped my clippers and they started having this really annoying noise. Just found out that it had messed up with the power setting when I dropped it. Thanks for the video!
@lmbpros
3 жыл бұрын
Thank you for your comment! Appreciate it! Glad it worked out.
@philipampofo6435
4 жыл бұрын
Sorry im confused- so i bought a Wahl balder 3 or 4 years back but never used it because of the loud noise. I fished out again during lockdown. Do I need to a) adjust the blades as shown 2) change the black adjustment screw 3) both. If I make it quiet by adjusting the screw, will that affect the cut? Thanks!
@lmbpros
4 жыл бұрын
Hi thank you for watching! I'm no expert but for me personally, I always clean out my clippers after every cut so I have to align the blades after cleaning. I don't always tune/power-up the black adjustment screw. If you turn it on and as I've shown (be careful not to cut yourself) by pinching the blades and your pinching stops the blades then tune/adjust/power-up by adjusting! cheers
@kevinsimons9813
2 жыл бұрын
I need to know if I can replace the white plastic that’s attached to to the metal vibrator that cuts the hair?
@lmbpros
2 жыл бұрын
kzitem.info/news/bejne/uJhn3WhsmGlypmk I made a video about this. You can replace the vibrating arm, but hopefully your official Wahl spare part website stocks the Particular model. Good luck
@catalinene146
Жыл бұрын
Thank you a lot man. You saved my budget. It really worked
@lmbpros
Жыл бұрын
Thank you for the comment. Appreciate it. Thanks for watching and taking time to comment!
@PatrickFaustino
5 ай бұрын
thank you so much! Instructions worked perfectly!
@lmbpros
5 ай бұрын
Thank you for taking time to leave a comment. Really appreciate it. Glad it helped out a bit. Cheers!
@puzzlering1
3 жыл бұрын
Thank you, an absolutely great video, very well explained and presented, I dropped my Wahl recently (oops!) and was not cutting and now thanks to you and this video, it is working perfectly again Thanks again Take care Sam
@lmbpros
3 жыл бұрын
Thank you so much for your comment! Absolutely made my day! Thanks for watching and glad it helped out!
@TheAGODAMI
2 жыл бұрын
@@lmbpros 🚨 *I haVe thaT saMe eXacT cLippeRs modeL.! WouLd you mind bRoTheR doinG a video tuToRiaL on hoW to fiX and repaiR thaT "whiTe thinGy" aT the (**0:30** sec.) maRK.?! Mine feLL oFF and I haVe no idea hoW to reaTTaCh iT...!!?!!!!?* 😢 😠 🙏
@edg3947
4 жыл бұрын
Thank you for uploading this tutorial 🙏🏼
@lmbpros
4 жыл бұрын
Thank you for your comment! Really appreciate it and thanks again for watching!
@neomatrix2722
8 ай бұрын
Thank you for sharing I thought my clippers broke but you help me maintain functionality thank you
@lmbpros
7 ай бұрын
Thank you for leaving a comment. Really appreciate it! Thanks for taking time to watch my video!
@blackwolfe638
3 ай бұрын
The screw on the side, that adjusts til you hear the loud noise. THANK YOU for pointing that out.
@lmbpros
3 ай бұрын
Thank you for taking time to leave a comment! Really appreciate it. Thanks for watching my video!
@martinthornton3229
Жыл бұрын
Thank you so much for this clear|, instructive video. Invaluable.
@lmbpros
Жыл бұрын
Thank you! Thanks for taking time to leave a comment. Really appreciate it! Cheers
@mikesuch9021
6 ай бұрын
Great video just what I was looking for .
@lmbpros
6 ай бұрын
Cheers. Really appreciate the comment ☺️
@crustysocks1
Жыл бұрын
Super useful, saved me a bunch of money buying new ones
@lmbpros
Жыл бұрын
Thank you for the comment! Really appreciate it. Glad it helped out
@cardion411
Жыл бұрын
Thank you so much buddy!!! This really helped, and I didn't have to bring to my barber!
@lmbpros
Жыл бұрын
Thank you for taking time to leave a comment! Really appreciate it! Glad it helped out a bit! Cheers!
@mavericks2k811
7 ай бұрын
My god I opened up my clippers and there was a habitat of hair trimmings living in it
@lmbpros
7 ай бұрын
I know what you mean! 🤣 If you don't have that tiny sponge bit that 'traps' the hair and 'prevents' hair getting inside the cavity of the clipper, you can buy them from your local Wahl supplier/website.
@jayjldn94
Жыл бұрын
Going to try this. Had my wahl Clippers for years. Just cut my hair today and it was uncomfortable. Very sharp and I have cuts all behind my head bleeding and very sore right now 😅
@UltimateMusicLeague
2 жыл бұрын
Thanks man.. Your video help save me some money!!
@lmbpros
2 жыл бұрын
Thank you so much for your comment. Really appreciate you taking time to watch my video. Glad it helped out!
@jakeodom96
9 ай бұрын
Saved me! It sounded so bad before I watched this proper tutorial. Works for wahl color guard.
@lmbpros
9 ай бұрын
Thank you for leaving a comment and taking time to watch my video! Really appreciate it. Glad it helped out a bit! Cheers!
@Paradox3627505
Жыл бұрын
HELP PLEASE. My clipper motor is active but barley moves back and forward despite turning the power knob, therefore the cutting blade doesn't move enough to cut hair. Any suggestions?
@lmbpros
Жыл бұрын
Hi, one suggestion I've been told is that the 'cam follower is worned out'. This applies to cordless clippers. www.wahlspareparts.com.au/p/cam-follower-4
@ethangoodman893
Жыл бұрын
Thank you very much. This video worked for me
@lmbpros
Жыл бұрын
Thank you very much for taking time to comment. Really grateful for it. Glad it helped out a bit. Cheers
@Heorgath1
Жыл бұрын
I tried doing this. But they do the really loud buzzing sound all the time, how matter how much i loosen or tighten the screw. Any ideas?
@lmbpros
Жыл бұрын
I've since learnt that for cordless clippers, it the "cam follower" is worn out (it's a piece of plastic) it will make a loud sounds. Try google "Wahl cam follower". Good luck
@stivotassinari
2 жыл бұрын
Thanks a lot, clear, easy and effective!
@lmbpros
2 жыл бұрын
Thank you!
@haroonanwary4978
2 жыл бұрын
Hello. I Have previously tried to zero gap my clippers and I have successfully done it. However no when I use the clipper and turn it on, either the cutting blade or stationary blade keep moving horizontally and they dont align at times. How do I fix? Appreciate it.
@lmbpros
2 жыл бұрын
The motor on the clippers is very powerful so the blades can get out of alignment (plus also thickness of hair is a factor,.... perhaps ) My best guess is to keep zero gap and tighten it just a little bit more (pls don’t over tighten!!!)
@AhedKarmoul
3 жыл бұрын
Extremely useful.. thanks bro
@lmbpros
3 жыл бұрын
Thank you for the comment! Appreciate it. Thanks for watching!
@fardale12
Жыл бұрын
Thanks! My clippers are working perfectly again!
@lmbpros
Жыл бұрын
Thank you for the comment. Really appreciate you taking time to send a comment! Cheers! Glad it helped out a bit
@GetIntoYourLife
2 жыл бұрын
I want to align like my Limural wireless was stock, I installed ceramic blades and I'm basically at a Zero gap. I want stock alignment so I can do a proper 0.5/1/2 fade.
@ManyMonstersMedia
2 жыл бұрын
Thank you!! Took mine apart to clean and couldn’t figure out how to get it back together 😂😂😂
@lmbpros
2 жыл бұрын
Cheers! Thanks for the comment. Glad it helped out in someway!
@myalaynaangel
Жыл бұрын
What side does the blade go on. Mine looks like it would matter. What side is top. I know the words for the top blade is facing you... but the inside blade, which is top?
@lmbpros
Жыл бұрын
The flat side of the bottom blade would face the white head. the two teeth of each blade meet each other.
@solomon.powell
2 жыл бұрын
Very helpful, thank you sir!
@lmbpros
2 жыл бұрын
Thank you sir for taking time to comment. Really appreciate it. Cheers!
@ericsfishingadventures4433
3 жыл бұрын
Left a like just because it was very helpful and you used a Pokémon ruler lol.
@lmbpros
3 жыл бұрын
Cheers! Appreciate it! I do like that ruler lol
@cartooncat4580
Жыл бұрын
So helpful. I had no idea about the screw on the side either
@lmbpros
Жыл бұрын
Thank you for commenting and taking time to watch the video! I really appreciate it! Glad it helped out a bit! Cheers
@aliciahackett4945
4 жыл бұрын
Very helpful and to the point.
@lmbpros
4 жыл бұрын
Hi thank you for watching! Appreciate it and your comment heaps!
@dem_06
4 жыл бұрын
TYSM. I already fixed my clipper... It's not noisy anymore.
@lmbpros
4 жыл бұрын
Cheers mate! Thank you for your comment. Really appreciate it.
@Andrew-lg1rd
4 жыл бұрын
My top blade always "parks" to the right hand side. This makes it impossible to align the bottom blade properly. Any tips please?
@lmbpros
4 жыл бұрын
Mine does that too. I'm no expert but Im guessing the vibration just knocks it out of place. I just tighten it a bit more but NEver over-tighten any screws especially on electrical items and plastics. also I always clean and re-align after every cut that helps it keep in place cheers sorry cant help more.
@nAdnan_Walexy1
2 жыл бұрын
Wow! Funny how my clipper stopped working, didn't know what to do even though people said it shouldn't be blunt so quickly, seeing it's just a month old. I'm new to barbing. Will give this a try once I get back to work. Thank you so much.
@lmbpros
2 жыл бұрын
Thank you for your comments and watching my video. Very appreciated. Hope it works out. Cheers
@ale347baker
Жыл бұрын
My clippers teeth physically can't align like that. I think the white plastic in the middle that holds the small blade is not centered. So my big teeth align with the edge of the bottom. Not the bottoms teeth, but the edge of the blade. The other sides big teeth align with the 3rd tooth. 1. Is this a problem? 2. Can the white plastic that holds the small teeth be moved/centered?
@lmbpros
Жыл бұрын
kzitem.info/news/bejne/uJhn3WhsmGlypmk I made a video to investigate when this happens. I'm no expert but logically looking at the inside (FYI: voiding warranty) if the vibrating arm, particularly the front end with the white head is bent then one can get misalignment. It's never happened to me so I can't guess why it happens but as suggested in the video is to buy a replacement arm or try to straighten it. Good luck
@lmbpros
Жыл бұрын
Regarding 2. I don't think the white head can be removed. Mine looks like it's glued down.
@SURVIVESincaves
Жыл бұрын
This guy's ruler is so cool
@lmbpros
Жыл бұрын
😂 Thank you
@wallisphoto
2 жыл бұрын
Thanks fixed it perfectly!!!
@lmbpros
2 жыл бұрын
Thank you for taking time to watch my video and really appreciate the comment! Glad it helped!
@thodorispapageorgiou9977
3 жыл бұрын
great video sir. thank you so much. i think what there is a problem with my clipper. the white "arm" that it below the cutter blade is not straight because when i put upon it the cutter blade, it bends on one side. can i do anything about it?
@lmbpros
3 жыл бұрын
Hi, thank you for the comment! Thanks for watching! From my what I know (Im no expert sorry), the white head that connects to the vibrating arm should never be bent. The only reason I can come up why it can be bent is that the unit has been dropped head first. I highly not recommend messing with the internals of the clipper ( I have wrecked one of my WAHLs :( trying to mess around inside ) However, since yours is already bent to one side, you can attempt to straighten it out as the metal that the white piece is connected to is quite bendable. That soft metal should only bend upwards and downwards. If you're saying bends on one side, meaning left or right then something is definitely wrong. Always bring back to your retailer if under warranty! dont open the case as it voids warranty! good luck. sorry cant help much. I tried google this topic but very few hits. you can replace the vibrating arm though here is a link for an australian store barberco.com.au/vibrator-arm/
@thodorispapageorgiou9977
3 жыл бұрын
Thank you for everything! I appreciate all your help!!
@lmbpros
3 жыл бұрын
@@thodorispapageorgiou9977 thank you! All the best mate
@josdebossss
3 жыл бұрын
In which position the moving blade needs to be for aligning the blades? I think its very strange that no toturial is mentioning this (even the original wahl)
@lmbpros
3 жыл бұрын
The top blade (that sits on the white prong) does not move. You should not force it to move in any way. The bottom blade can be move/adjusted by slightly unscrewing the two bottom screws. I explained it in the video. It will tell you which position to move the bottom blade relative to the top blade. Good luck. Thanks for your comment
@90MenA90
Жыл бұрын
Did you figure it out?
@DV1979
Жыл бұрын
Unfortunately the video doesn't show that part of the top blade, how to install/place it.
@user-uu6hn9nn2x
Жыл бұрын
U da goat for this one
@jeremykwan1792
4 жыл бұрын
Baiklah brader. Clear and useful info. Subbed and liked.
@lmbpros
4 жыл бұрын
Terima kasih brader and Thanks again for your comment. Appreciate it. Glad it was useful!
@2timothy477
3 жыл бұрын
Thank you and God Bless you. Steven.
@lmbpros
3 жыл бұрын
Thank you for watchcing! Appreciate your comments and glad it helped! Bless you brother!
@offwhite5346
2 жыл бұрын
What if the white part, where you connect the bottom blade falls put how do u fix that
@lmbpros
2 жыл бұрын
I just made a video regarding this. It’s not meant to be ‘removable’, I really don’t know the answer. Contact an authorised repair agent? Maybe glue it back? Sorry
@davidt2142
3 жыл бұрын
Helped me too! Thanks bro
@lmbpros
3 жыл бұрын
Thank you very much for your comment. Glad it helped! REally appreciate it!
@cscher
4 жыл бұрын
I have a dumb question . I don't understand the part about the gap. There is supposed to be an 8mm gap between what? What are you measuring at 2:15?
@lmbpros
4 жыл бұрын
Hi! I struggled understanding this 'gap' that everyone was talking about too! au.wahl.com/AU.wahlglobal.com/media/Manuals-Factsheets/Barber-Tool-Care.pdf "The top & bottom blades should be parallel with the top blade approximately 0.8mm behind the bottom blade (do not have the top blade level with the bottom blade as this can cause skin pinching or cutting)" Gonna repeat it.... Don't level the top and bottom blades even. Just slightly **lower** the TOP blade down by 0.8mm (not 8mm!) so they look like they are parallel At first, I leveled both blades (both are even) and I learnt the 'pinching' the hard way... very painful. lol Hope that helps! Cheers. Thank you for watching! Really appreciate it.
@rosdiamirsidek6821
3 жыл бұрын
not 8mm, 0.8mm, bottom blade should be 0.8mm ahead of top blade.
@araphealchriz2083
4 жыл бұрын
Thumbs 👍 bro, am from Uganda and was abt to throw mine away then I found yr video and gues wat!,ma machine is,more shaper compared to even wen it was brand new thanks alot
@lmbpros
4 жыл бұрын
Cheers bro! Thanks for watching the video. So happy to hear your clippers back to working order!
@aznsketcher
2 жыл бұрын
Ok, right at the beginning: the white plastic piece that moves the small blade back and forth--mine is off-centered! so it's making the small blade off-center and too hard to align it with the large blade....can someone help me out
@lmbpros
2 жыл бұрын
I just made a video regarding this white head. To be honest, my white head is also off-center but as long as I zero gap. I had no issues. Sorry I am not helpful.
@JoshPhoenix11
Жыл бұрын
Err, I think that slot in the brush handle might be for setting this gap 0:53, it looks like the exact same length as the blade
@heythere6983
2 жыл бұрын
If the bottom Blade(cutting blade) sits crooked with the plastic in the middle, and the top still blade Can’t align straight with the bottom teeth, this would be a defect right? My cutting blade sits crooked And the top simply doesn’t move enough to make up for the slant
@lmbpros
2 жыл бұрын
I tried to look into this issue, with this video..kzitem.info/news/bejne/uJhn3WhsmGlypmk
@pcojedi
Жыл бұрын
thank you, very helpful
@lmbpros
Жыл бұрын
Thank you for the comment! Really appreciate it and made my day! Glad it helped out a bit. Cheers
@impeter245
3 жыл бұрын
Where can I buy the replacement screws that holds in the blade? And what is the name of it?
@lmbpros
3 жыл бұрын
'Blade Screw' wahlspareparts.com.au/epages/Wahlspareparts.sf/en_AU/?ObjectPath=/Shops/Wahlspareparts/Products/WA0508-400 Australia only.
@TheAGODAMI
3 жыл бұрын
@@lmbpros 😵 *WhaT is the naMe and/oR funcTioN oF thaT "whiTe thing" thaT siTs undeR the bLadeS.!??!? Mine soMehoW beCaMe deTaChed and now I can'T geT the raZoRs to reaLigN and sTay puT in oRdeR to scReW the pLaTe bacK on.!! {**#pLeaSeHeLp**}* 🙏 😠
@lmbpros
3 жыл бұрын
@@TheAGODAMI barberco.com.au/vibrator-arm/ Google 'Wahl Vibrating Arm'. This link is from an Aussie store. Good luck finding one!
@impeter245
2 жыл бұрын
@@lmbpros thanks man. I appreciate it!!
@schoujill
2 жыл бұрын
This was soo helpful, thanks. So many questions tho: 1) I noticed a broken tooth on my bottom blade. does that mean I need to buy a new one? 2) No matter how hard I try to line things up perfectly, when I tighten the screws they move out of place :( Any advice? It was seriously helpful though! Until now, I didn't even know that I could or had to align the blades and clean it out, but it was working so poorly.
@lmbpros
2 жыл бұрын
Thank you very much for your kind comments. Really appreciate it and thank you for watching too. Broken tooth... I honestly don't know but I imagine you might get hair stuck or jammed between the tooth or blades? Or perhaps not cut a line or section of hair? Very curious now Googling a quick check on Blade replacements they average about AUD35 and up to AUD60 (rip off) excluding shipping/tax I also learnt about stagger tooth blades (comes with WAHL magic clip) and precision blades (comes with WAHL Seniors)! Also just learnt there are mods that you can even buy an ANDIS blade to fit onto a WAHL (US website about USD30 excluding shipping/tax). So you got a good reason to research and buy a new replacement! I know what you mean, those blades keep moving out of position when screwing back together. It took alot of patience and experience until I got it aligned just right!
Пікірлер: 483