Good tips with the damp, jonnies, brick wedges stop em rolling forward.
@viankalobosvalenzuela7456
3 жыл бұрын
How beautiful the excellent work professionals, greetings from san felipe chile
@andrewpalij4691
3 жыл бұрын
So wrong, cills are never fully bedded only on the stools or they crack, check manufacturers spec .
@stones105
3 жыл бұрын
That's the way we were taught mate, bed the seats only, if there's any settlement of the building during construction a full bedded cill will crack....🤔
@colinbrassington3531
3 жыл бұрын
So true
@leehardingham4522
Жыл бұрын
AHH makes sense about the settlement part
@gerardoconnor2699
3 жыл бұрын
That's cool, can I make a concrete sill in situ using the block work and a wooden frame as mould. It's a huge sill of 8'6"by 18" in depth so can't lift one
@Oncewasdonka
3 жыл бұрын
Hi so if the water penetrates the cill to the back what stops it running down the end into the cavity. Theres no weep holes? Cheers
@stuartjones1982
3 жыл бұрын
There will be virtually no water ingress through that cill. Any that does will either be absorbed by the brickwork or simply fall to the next tray above a window, door etc or to the tray at dpc level if there is one in place. If not simply to the bottom of the cavity below dpc. It certainly will not penetrate the inside skin
@Oncewasdonka
3 жыл бұрын
@@stuartjones1982 I agree so why the damp.
@stuartjones1982
3 жыл бұрын
@@Oncewasdonka I assume it's just to protect the stone from any falling "muck" from the lifts above. We build our damp protection in on top of the shoulder of the stone. But I'm a southerner and we all do it different!
@Oncewasdonka
3 жыл бұрын
@@stuartjones1982 yes it would help protect it. Thanks
@McCaff62
3 жыл бұрын
@@stuartjones1982 That damp wasn't getting turned back over on to top of cill for protection,it was acting like a tray in the cavity, without ends turned up, so its actually doing fuck all{ not that its needed there anyway}, the retards in offices think of these things but actually haven't got a clue in the real world. Usually NHBC idiots thinking of new things.
@simonpeterhutchinson
2 жыл бұрын
Cheers lads
@hbpw857
3 жыл бұрын
How much you get for them mate
@benllewellyn1887
3 жыл бұрын
Not hating but they look like pre-cast, not stone.
@Changy_C
3 жыл бұрын
Yeah, the average person watching doesn’t know what pre cast is
@brickblocksolutions1660
3 жыл бұрын
Dpc should be wrapped up either side to stop damp with weeps either side of the cill mate
@walshjames1020
3 жыл бұрын
@@brickblocksolutions1660 yr dead right dpc should be longer then the Cill and folded at the end why cut it level with the end of the cill?
@premsworldfamily6616
3 жыл бұрын
Can it be done where you keep the original windows and install the sandstone window sills and then reinstall the original windows? Mine are already upto date double glazed
@Changy_C
3 жыл бұрын
Windows can stay in, just install sills
@premsworldfamily6616
3 жыл бұрын
@@Changy_C so you wouldn’t need to remove the windows you could work round them?
@Changy_C
3 жыл бұрын
@@premsworldfamily6616 exactly
@paulperrin2152
3 жыл бұрын
What's the packings for?,
@Changy_C
3 жыл бұрын
Front heavy because of the overhang, stops them tipping forward
@McCaff62
3 жыл бұрын
@@Changy_C Give you a tip, allways have some little wooden wedges in u bucket/box for when u put cills on.
@TommoDobbo-dp1gu
3 жыл бұрын
You made the opening to big?
@Changy_C
3 жыл бұрын
No why
@TommoDobbo-dp1gu
3 жыл бұрын
@@Changy_C just wondering why is there a gap at the right hand side of the sill?
Пікірлер: 34