Back in 77 I literally built hundreds of four -six feet brick sills on the old St Pauls field site in Hammersmith. I was an 18 year old apprentice. I worked for the General Contractor but all their brickwork was subbed out. The subbies didn't have too much time to teach you anything. Their was no money in the sills so they wanted nothing to do with them. I got lumbered with them. Luckily, the first one I was put on was well away from the general population. That was lucky for me, because the first sill must have collapsed on me four or five times. Near the end of the day some old boy came by to hide his tools. He saw may predicament and spent about half an hour with me showing me some tricks of the trade. How to cut the angle of the brick with the scutch hammer, which was basically a brick hammer with teeth. Lay the bed on a slight angle as well and let it set up while you prepare the next sill with Dpc. Also when laying also butter the angle at the back of the brick. the joint would connect to the inside block. Took me a few days of trial and error but I was soon pretty prolific at them. What was best was when one of the subbies would be put on them for a day. More often than not they had previously criticized my work. Now they were on my territory. Got a great kick out of how they would get a bollocking in the evening when the foreman would count their sills and complain to them that," even that bloody apprentice done more than you."
@piersgrowcott8179
8 ай бұрын
Well done Charlie sahn! as a 61 year old ex-brickie (did C.I.T.B. apprenticeship in late 70's,got city + guilds cert. then worked for sub-contractor for 5 years then was confident enough to go on my own) had on old bricky (Jack) taught me well to do all kinds of brickwork just like you do with your learners AND how to read drawings and set out work-thats why i'm saying WELL DONE MATE you remind me of Jack the way you teach your youngun's on the trowel! P.S-never heard of pick n mix way of laying bricks till i saw you doing it in one of your videos 3 years ago...before that i thought pick n mix was the sweets section in Woolworths-hahaha! (not blowin smoke out your arris mate) but your an excellent brickie,an excellent teacher and a top man,wish you + Amy all the best,take care and keep these interesting + informative videos coming,see ya Piers a.k.a. Chopper.👍🤝😀
@clivehyde1756
11 ай бұрын
Lovely work as always you can Dutch pin a profile under the cill bricks aswell stops them bad girls swimming 👍😜
@SS-vz9iv
10 ай бұрын
Minor detail, which I'm sure you did Charlie, but for the apprentices just remind them to fill their pin holes up when the line comes off seeing as it was into previously finished work 👍🏻
@Dazza19746
11 ай бұрын
Great teacher actually mate!
@user-ip6dv4qh6j
11 ай бұрын
No flat Irons Charlie? Much better than the pointing Trowel!
@neilu.k.1364
10 ай бұрын
Lay the first two as you did and then nail/screw/Dutch pin some lath the length of the run at underside of the cills. Gives something for the front of the cill to sit on and stops them from tipping
@Wattsjoinerybarn
11 ай бұрын
I love your videos Charlie. This as a tutorial was brilliant. I know it’s all time vs money but you should do more tutorials💪🏻
@MELOCOTON35
11 ай бұрын
You're a natural teacher
@FreerSelf
11 ай бұрын
Hey Charlie, you can use that rubber smudge eraser (you found in your competition winnings bag) to clean up the sill bricks after they dry a tad, makes the job look mint
@iantully6906
11 ай бұрын
Superb tips from Charlie to his Padowan😂
@colinevans7134
11 ай бұрын
Another good video Charlie
@TheAsa1972
11 ай бұрын
Not a criticism or anything Charlie but you should measure the overhang from point A to B and if it looks out at the top of the slill then its down to the bricks and you can prove it ,Saying you put the starting points at the back of the bricks puts the blame on you as you are going off the facework
@luucassouzaoficial
11 ай бұрын
Esse cara é muito bom, ótimo trabalho 👏🏻🇧🇷
@chrispinkney8002
10 ай бұрын
Mint Charlie, I also use expansion foam to buff up engineered bricks 👌. Lovely work mate
@johnb2044
11 ай бұрын
couple of old cut nails and a nice straight edge of timbre bang up underneath not tipping out any day
@jackrussell9811
11 ай бұрын
another tidy job charlie , i always carried a roll of electricians isulating tape mainly for split fingure tips but handy to tape the line to the brick arris
@Joe-jv5mm
11 ай бұрын
Love this series of videos, brilliant camera work/ sound quality spot on
@thequion
11 ай бұрын
Sill flashing would have been nice. Lets not confuse flashing with DPC.
@liambrennan783
11 ай бұрын
Tip of the day Charlie lad not meaning this in an insult in any way but to save you taping that sort of soldier course out below the window just go to the full bricks on the course below as it is all full bricks and 3 soldiers work a full brick that would have saved the time in taping out!! When I say the course below I mean the course below to the course you are laying on, gague your soldiers from that and it will work bro, that would have saved taping out 👍
@funcleandwuncle
11 ай бұрын
this man has done this many times 👍
@ernestogonzalez17
9 ай бұрын
Amazing work mate
@yensabi
11 ай бұрын
Nice tips.... 👍
@Kaibartram-xh3sj
11 ай бұрын
Hi Charlie can you please put vog everyday please hope you well you should visit Hartlepool please in uk please 😊😮🎉❤
@thedrvn
11 ай бұрын
Haha jeezus the mans a full time bricky daily uploads is a fookin mission! Although quite the challenge eh Charlie old boy! 👍
@joncox9098
11 ай бұрын
Nice to see you have patience with the young man, I’m a old plumber now and keep in touch with one of my older plumber that taught me, hopefully he will you. Keep up the good work.👍
@ravingiron9356
11 ай бұрын
Bit tight on the gauge with them last 2 eh 😄...then again i was only on the trowel for over 40 years.
@rustleinthebushes6065
11 ай бұрын
Thank you for the content collison 👍 no paperwork bricky here doing private jobs , well in
@martinpower9453
11 ай бұрын
What a man Charlie
@iantincangleed4702
11 ай бұрын
Neat work you
@Dipzee
11 ай бұрын
Top man cheers for the video
@steveross1260
11 ай бұрын
Good eye Charlie!
@alfredasmelis3204
11 ай бұрын
Clean and smooth , thanks
@stevo5009
11 ай бұрын
Great video
@AnacesardaLuz26daLuz77
11 ай бұрын
César 🧔🏻💪🥳 Si 🎂
@mikeyb.7759
10 ай бұрын
You forgot the tray damp
@Scottish_Trucker
11 ай бұрын
BEAUTIFULLL 👌🏻
@garyhockaday8022
11 ай бұрын
Good video …..
@ianparker3486
11 ай бұрын
Great work
@lawrencecarlin4309
11 ай бұрын
Nice job
@Jxshspk
11 ай бұрын
What shape and size trowel is this Charlie?
@willbee6785
11 ай бұрын
It’s just like being there.
@chrismason5582
11 ай бұрын
Going to fast Chaz,looks like you forgot the damp tray,I earn loads of money from putting right price workers,stil good stuff,lvcx
@CharlieCollison
11 ай бұрын
Wasn’t in the detail mate
@jimrowland8310
11 ай бұрын
Personally 😂
@jaycole7425
11 ай бұрын
“Right” count = 637
@ConfectioneryCorner
10 ай бұрын
Hey, I used to watch walls being built as a kid and teenager but I wasn't never allowed to do. I have some questions please. Why is there a gap between the red brick wall and those white blocks behind them? Do you fill that gap full of insulation or something? Thanks. This video is cool, you look like you know what you're doing =)
@ruinfox4108
11 ай бұрын
my backs hurting just watching this, still love it though lol. but man doing that over n over would drive me insane. as in just laying brick after brick one by 1 and having to be perfect with every brick you lay, defo not cut out for this type of work 😅
@BenjaminBest-rq5dl
11 ай бұрын
Someone's gotta do it brucey
@ruinfox4108
11 ай бұрын
@@BenjaminBest-rq5dlyup and Charlie does it beautifully
@evocarti
11 ай бұрын
GSQ?
@nigelkemp1588
11 ай бұрын
Not free hand if you are using line
@eamonmoore6134
11 ай бұрын
Some use a level to do brick sills. So you can kind of define it as freehand, yes
@nigelkemp1588
11 ай бұрын
@@eamonmoore6134 never seen anyone use level
@eamonmoore6134
11 ай бұрын
@@nigelkemp1588 does that mean they don't?
@SennaStar
11 ай бұрын
Amazing skills Charlie. It upsets me knowing that you have more skills than any of the clowns that are allegedly running our country
@Ink706
11 ай бұрын
Any more teaching and you'll have to join the union and then go on strike!!😱
@TheCiaran1000
11 ай бұрын
Hi as an apprentice I’m labouring quite a bit I haven’t laid much and starting fresh I mostly am labouring , have you any advice on how long I should be labouring for and what I should do to change that thanks
@John-cn9bq
11 ай бұрын
I had same problem not so long ago. Try get ahead as much as you can bro and bed out for them and lay when you can, you're gaffer will know when the time is right he won't want a decent trowel on the shovel. Hope that helps a bit bro best of luck with it
@gteaz
11 ай бұрын
Whilst labouring, watch and learn and your time will come.
@richardstetson8221
11 ай бұрын
When you are all caught up with bricks and mortar start jointing the bricklayers will like that and you won't be the one they send to mix or ask them if they want you to spread the wall that's how I started it gives you a chance to get comfortable with a trowel in your hand before you start laying
@jamiemerrick4216
11 ай бұрын
Be the best labourer you can mate and watch, learn and jump in when you can, you’ll get your time
@markadler8968
11 ай бұрын
Let your boss know you are interested in learning and always jump at the chance to install even a few bricks here and there. Once you get to the point where you are more valuable on the tools than the shovel it is only logical your boss will keep you on the tools.
@andrewwilliams8187
11 ай бұрын
Muck lol
@John-cn9bq
11 ай бұрын
Where does the damp course go now?
@eamonmoore6134
11 ай бұрын
The bricks don't bridge the cavity like a concrete sill does
@John-cn9bq
11 ай бұрын
@@eamonmoore6134sound lad, haven't done much brick all concrete solids.
@Chattingbubbles
11 ай бұрын
Seen and worked with better , cleaner and faster brickes if I’m honest
Пікірлер: 71