The tube of super lube would be better since it should be easier to control. Using the Spray can of super lube has a better chance of breaking your keyboard since it usually is messier and the lube can mess with the contacts of the switch and making them be inconsistence or cause it a key to not work at all. Just a heads up for anyone going to use the method of spray lubing to using super lube in general.
@theidiotgamer4306
10 ай бұрын
If a key stop working after spay super lube, then you can fix it with wd40. But wd40 multi use is the best method for spray lubing. Still, after using wd40, some keys may stop working. You just need to leave them some time to dry. Wd40 multi-use, can clean your switches and lubricate them at the same time!!!
@faded8911
3 жыл бұрын
I did this and it actually worked surprisingly well. It’s not as good as hand lubing but it’s still phenomenal for the effort needed.
@MasterAlex24
3 жыл бұрын
Good stuff my guy. Would recommend sound testing on a big mouse mat to dampen the key presses from the table. Will definitely try this
@Muzziii
3 жыл бұрын
Thanks man, I'll try to get a proper mouse pad for future builds!
@Adlerini
3 жыл бұрын
@Aydin Angel two bots nice
@yuzokaneko
3 жыл бұрын
Thanks a lot for the video. The rattling sound of the space bar and the backspace key was driving me crazy. Just lubing the stabs improved like 100%. It´s a whole different keyboard. I didn't lube the switches though.
@Muzziii
3 жыл бұрын
I don't think the switches really need to be lubed., looking back if I had to do it again I'd skip lubing the switches
@yuzokaneko
3 жыл бұрын
@@Muzziii Good to know ! haha
@IdoIsMe999
3 жыл бұрын
do you use dielectric grease for the space bar?
@yuzokaneko
3 жыл бұрын
@@IdoIsMe999 yeap!!
@Abarai
3 жыл бұрын
I got this keyboard a couple of weeks ago and the stabs were awful, I'm going to try to lube the stabs using your method! Great video!
@Muzziii
3 жыл бұрын
Thank You!
@idkwhattoputhere5503
3 жыл бұрын
Are the stabs actually awful?
@hoodinxz
3 жыл бұрын
@@idkwhattoputhere5503 It’s not that terrible like some other keyboard, it’s just decent
@pk.002
3 жыл бұрын
@@idkwhattoputhere5503 I have the 60 percent version, they're not the worst stabs I've ever used but out of the box, they rattled. I added dielectric grease to lube them and now they're fantastic.
@idkwhattoputhere5503
3 жыл бұрын
@@pk.002 ok
@asufrin250
3 жыл бұрын
Hey man great vid! Finally someone posts a video on this keyboard without having to desolder. Do you think adding fabric tape in between the plate and stabilizers makes a difference either the rattle or should I just focus on using the dielectric grease?
@Muzziii
3 жыл бұрын
Thanks for watching and glad you enjoyed it! I got most of the rattle out but it's far from perfect. I think the fabric tape will help a little, but the stabilizers are pretty snug in the plate (mine don't move at all, so it didn't make sense to add any for me) Of course it will vary as its a mass produced board I've tried the fabric tape method with the Kumara K552 board I have and that made a noticeable difference
@TriNguyen-nl7qo
2 жыл бұрын
@@Muzziii I lowkey just put some blu-tac around the stab housing. It worked wonders on some keys (e.g. my space bar) but not so much on others (my backspace and right shift), cos it depends on whether most of the rattle comes from the stab housing wiggling the top frame, or the stab stem wiggling inside the housing. Asthetic-wise it also isn't the greatest option but it's only an annoyance when I look at the keyboard directly top down or right from the side so in the end ig that's still worth trying though.
@rykimchi
3 жыл бұрын
Nice vid! Did the same thing for my hyperx alloy and I am happy with the results! Subbed :)
@PCPAyLOAD
2 жыл бұрын
The brush method is the only "easy method" I would recommend for tactile switches like Blues or Browns if you want to retain the tactile feel and click. A very light amount of 205 G0 lube on the two slider sides of a tactile switch, avoiding the switches bump/hook will get rid of a lot of the scratchiness, make them buttery smooth and retain about 75% of the click. Much easier then tearing the whole keybaord apart. I do recommend a high quality brush so you don't shed hairs in the switch.
@alio0157
Жыл бұрын
Hello sorry if this is a dumb comment but where is the slider side located on the tactile switch?
@yougo6419
Жыл бұрын
It is on the front side where there is no led @@alio0157
@Leogos281
Ай бұрын
@@alio0157 slider is located left and right iirc, and you should lube top and bottom.
@CeeDawg69
2 жыл бұрын
Tysm for making this i have the same keyboard and was so sad when i found out it wasnt hot swappable (R.I.P the bannana split switches i wanted) now i can make it sound a lil better than it does now. =)
@sweetp3660
3 жыл бұрын
This helped a lot, keep it up man!!
@joel-ru8pi
2 жыл бұрын
did not expect such a difference that lubing makes, my board feels so good after lubing the switches and stabilizers. i also did the bandaid-mod for the stabilizers.
@Muzziii
2 жыл бұрын
Aye nice!, yeah it does make a huge difference and changes up the whole user experience!
@xFaZebRuTaLx
Жыл бұрын
how do you do bandaid mod on this hyperx?
@98ana
2 жыл бұрын
i have a hyperx alloy fps pro with linear reds and will be definitely be doing this as soon as i get my hands on some lube. thanks for the video! :)
@Muzziii
2 жыл бұрын
Thanks for watching!
@gwapings90
2 жыл бұрын
Just got this keyboard recently. This guide helped me alot thank you!! My keyboard sounds even better
@cboy0001
3 жыл бұрын
woah thats actually really good
@westpole
3 жыл бұрын
11/10 title right there
@Trickshotter
2 жыл бұрын
The backspace needed some work for sure but man this is good
@NyahEwan
3 жыл бұрын
My savior 🙏🏽
@anthonyapm
3 жыл бұрын
Exactly what I was looking for! Thx mate!
@yeri8968
3 жыл бұрын
You should consider posting on tiktok. You would be surprised how much you can grow with tech content there. Keep up the good work
@Muzziii
3 жыл бұрын
I’m on Tik Tok as well @shakemuzzi but I need to up my quality on there!
@aimtenshi
2 жыл бұрын
Thanks! Lubed stabs with krytox 205g0, visible improvement! By the way, their HyperX switches are prelubed, confirmed by stuff
@Muzziii
2 жыл бұрын
Thanks for watching! Happy to hear it helped! Yeah, that explains why this keyboard was better than others out of the box!
@Jasi.
3 жыл бұрын
Damn it sounds good!!
@loganhurley6666
3 жыл бұрын
Giyu?
@dearboycharles
3 жыл бұрын
The spacebar is deep
@ethernet389
3 жыл бұрын
enter and l-shift sound over lubed but well done. Def wanna try something like this on my old board
@Cheezus
3 жыл бұрын
to be fair, I'd rather have them overlubed than rattle when I press it
@mamba2019
3 жыл бұрын
@@Cheezus yea true
@gaydubbbz8148
3 жыл бұрын
suprisingly good for a methode this scuffed
@ajmainfaieq9036
3 жыл бұрын
bro can you give me your preset it looks dope
@braydon1449
3 жыл бұрын
Great quality video! Thank you for showing me these methods
@fukouda-sama
10 ай бұрын
How do you guys solve the keys not registering in HyperX Alloy Core? I heard from the video something about board hard reset? How do I do that?
@Dr.Graaff
3 жыл бұрын
Great Guide!
@aee_2137
3 жыл бұрын
this is how they should sound stock tbh
@leandrotalenton6433
2 жыл бұрын
try the bandaid modification on the stabilizers of the spacebar, shift, enter and backspace to reduce rattle due to loose stabilizers. the difference it makes is amazing
@iwbsi2033
3 жыл бұрын
can I have your keyboard lighting profile? It's kinda cool
@Muzziii
3 жыл бұрын
Thank you, my most recent video on my channel has the profile/how to!
@christianalvarez9195
3 жыл бұрын
Great video, just one question, i can quit the switches of the keyboard? I have the same one, the hyperx alloy orgins core
@slept620
3 жыл бұрын
Ayy good vid bro!
@Muzziii
3 жыл бұрын
Thanks!
@mountaincherry5429
3 жыл бұрын
Thx. Imma try it out😁
@Muzziii
3 жыл бұрын
Happy to help! Let me know how it goes
@cyberflex11
3 жыл бұрын
Thanks for the video. You inspired me to lube the stabilizers on my Alloy Origins Core with Aqua switches. I had actually given up on using that keyboard and was looking for others I could buy to replace it, but couldn't find something that had the same sound and feel of the aqua switches. I always assumed that because I couldn't take the keyboard apart and separate the stabilizers that I would never be able to use it without stab rattle, but I used your method and they are much better. They are certainly not perfect, I might look into doing a band-aid mod or something to stop the stabilizers from moving around on the plate, but they are so much better than they were stock. Thanks!
@Muzziii
3 жыл бұрын
Happy to help and thank you for watching!
@qz2815
3 жыл бұрын
I also had two keys that stop registering, how did you do the hard reset? thx
@Muzziii
3 жыл бұрын
Hold down fn and esc for a couple seconds until the backlight flashes, you'll know when it happens. Keep in mind you will lose the custom LED profiles saved on the board.
@LastMag
3 жыл бұрын
I just picked up the new HyperX alloy origins core 60, and I ended up watching this video because the keys with stabs feel really mushy when bottomed out (all of them except for left shift... for some reason that ones ok) and I assumed that the TKL version would have the same design. Did you also run into the same mushiness before lubing? Would you say this is an issue that requires disassembly and clipping of the stabs?
@Muzziii
3 жыл бұрын
Congrats on the new board! I don't have any experience with the other HyperX boards (Maybe I'll get review units if this channel ever gets big LOL) I remember the keys always being nice and smooth and no real mushy feeling! There was that rattle tho that the lube fixed. (Honestly unless they changed something I think its cheaper for them to keep using the same stabilizer design across the line as its probably cheaper) The 60% is new so it could also just be some imperfections in the assembly process/QA process
@LastMag
3 жыл бұрын
Huh ok. Good thing it has a 2-year warranty so I can always return it for a new one in a year or so when they get the assembly line more in order. I can definitely see this being the case, as the left shift (as stated before) does not have this mushiness unlike all the other stab keys, and no reviews on it yet have reported the same issue I am encountering. Of course the stabs have a lot of rattle but that was to be expected, and not a qc issue.
@niccoPk
3 жыл бұрын
thx, that was helpful!
@OlleLevander1
3 жыл бұрын
I have the hyperx alloy origins core (the same one as you have) and my keys with stabilizers are kind of mushy. Do you think lubing my stabilizers will help with this problem?
@Muzziii
3 жыл бұрын
Not sure if it'll help with the keys being mushy, but it should add some lubrication to the switch and make it more smooth. My stabilizers did sound and feel a lot better after I did this tho
@OlleLevander1
3 жыл бұрын
@@Muzziii thank you so much for the response i will try lubing the stabilizers i hope it will help.
@ДобрыйАртур3
3 жыл бұрын
After sound damn good!
@user-qw4a223
3 жыл бұрын
Nice, but I wouldn't really recommend spray lubing, because there are chances that it can gunk up your contact pins, causing more delay
@sirnaelias9881
3 жыл бұрын
YOO 🔥 🔥 all the way. I have a keychron its pretty good. My first mechanical keyboard. 🔥 video tho
@Muzziii
3 жыл бұрын
Thanks bro, yeah I have another keyboard build planned for this upcoming summer!
@dyceeee
2 жыл бұрын
How many droplets of Super Lube do you recommend for each switch? It’s best to ask you as we both have the same keyboard.
@Muzziii
2 жыл бұрын
Half a drop, maybe 1 drop if there's a lot of ping. Don't overdo it, even if tempted, most of it will leak over time if you put too much
@iPhantom.
2 жыл бұрын
did you do anything to the stabilizers?? it sounds like a huge difference in the rattle in the before and after clips. im just not sure if that would be from lubing it or if you did anything else to make the stabilizers better
@Muzziii
2 жыл бұрын
Nothing other than what's shown in the video!
@alohasean8165
3 жыл бұрын
I have the same keyboard as you. Now im not a expert with keyboards but mines is brand new but as I was trying to switch out the keycaps on my spacebar the stabs broke off and its stuck inside my spacebar. I bought new stabs. and im wondering if its possible to remove the stabs without taking out the switch?
@Muzziii
3 жыл бұрын
As far as I know, you have to desolder them :(
@liltrolling
3 жыл бұрын
Hey i also lubed my Hyperx keyboard. i have ticking sounds coming from the stabilizers. Does someone know how to fix it without desoldering ? Thanks!
@mohnjolina
3 жыл бұрын
Can I lube my stabs with krytox?
@Muzziii
3 жыл бұрын
Yeah I think that's actually better, and what some of the other people commenting have suggested!
@sxn502
2 жыл бұрын
to get rid of your rattly spacebar i would recommend u doing the bandaid mod to your stabs i hope this helps
@Fissi0nChips
3 жыл бұрын
you should have oriented the keyboard and mic the same for both tests. Hard to tell the real difference when the test circumstances were not the same.
@nushKiran
3 жыл бұрын
Ty for the video❤️
@Muzziii
3 жыл бұрын
Thank you for watching!
@laxyakumar9440
3 жыл бұрын
nice man!
@mzdmazda
2 жыл бұрын
wow sounds so good afterwards, might do this to mine :D
@deionandrade6772
3 жыл бұрын
Does this void the warranty?
@TristanWeidner-qi8cs
4 ай бұрын
Of course
@zsrdemian3428
2 жыл бұрын
Did u let it dry before u used it again?
@kuryuzzaky7189
2 жыл бұрын
Great Vid! Did you had any issues so far after doings this method? Is it really safe? My friend's kb led lights died after a month(she used method 2), my guess is that she over lubed the switches which probably damaged the pcb somehow.
@Muzziii
2 жыл бұрын
Thank you! I’m sorry to hear about your friends keyboard 😔 Luckily I haven’t had any problems (aside from the mess from the excess lube leaking out) I posted a video recently going over the keyboard (Roughly 1 year later) I’d recommend checking that out!
@Frank020
3 жыл бұрын
I'm using that tube too, but some sound overlubed, and some ok. Hard to dispense exact amount. Only did key pad 2 small drops. I should try one. I'm ok on cherry red right?
@Muzziii
3 жыл бұрын
yeah Cherry red and these are both linear, to me they actually feel the same LOL The drop method isn't that accurate unfortunately, I try to put as little as possible and add more if needed
@Frank020
3 жыл бұрын
@@Muzziii strange using 51014 super, A fine line between going overboard. Dental floss picks until shiny wipe excess off, hit both sides, not top or bottom. Some feel like they need more, but will wait.
@dingledanglebaby
2 жыл бұрын
One question, Would it damage non swappable switches?
@LaurenCH528
2 жыл бұрын
The board in the video is a non-swap board so no
@TeiMoneyBeats
Жыл бұрын
anyone knows how to fix shift buttons hard to press on this keyboard?
@JoFuture
2 жыл бұрын
The most annoying thing is that the stab is unclipped...
@Henrique-wv9xq
2 жыл бұрын
I'm gonna have to try this, my alloy origins has garbage stabilizers and rattles like hell, and hyperx support basically told me to suck it up.
@Muzziii
2 жыл бұрын
:( I hope this helps you fix it!
@sxn502
2 жыл бұрын
sounds kind of thocky and i love it
@w1lls872
3 жыл бұрын
I have really loud and clicks blue switches that have a lot of rattle to them. As long as the sound is dampened and there’s less rattle, I don’t really care how they feel. Is this a good idea?
@lukiepookie3271
3 жыл бұрын
if theres a hot swap keyboard should i take the switch apart and lube it properly?
@Muzziii
3 жыл бұрын
Great question and 100% take it apart if you can. and on a hot-swap, it makes no sense to use this method imo. This was the quick and dirty way to do it if you just wanted a stock board to sound better without desoldering and taking it apart.
@lukiepookie3271
3 жыл бұрын
@@Muzziii thanks! Ive heard it takes a while to lube a board. But this is my first custom keyboard and i want to go all out so I’ll definitely do that
@Muzziii
3 жыл бұрын
@@lukiepookie3271 Enjoy the process man, something satisfying about it hahah Let me know how it goes!
@lukiepookie3271
3 жыл бұрын
@@Muzziii you got it 👍🏼
@filipkrus2935
3 жыл бұрын
But how did you reach the wires?
@Muzziii
3 жыл бұрын
Just using the paintbrush and going in at an angle, definitely not perfect, another comment suggested using a pen/syringe to get in there
@karateka29amura
3 жыл бұрын
Hey, do you need to open everything on the board or?
@Muzziii
3 жыл бұрын
I didn't open anything other than taking off the keycaps and what I've shown in the video for the stabs.
@karateka29amura
3 жыл бұрын
@@Muzziii oh wow :0 i thought u opened it! Okay thank you really
@Muzziii
3 жыл бұрын
@@karateka29amura yeah but I will say after a couple months of regular use the excess lube will leak out and make a little bit of a mess, but you can just wipe it off with a cloth
@larmix4558
2 жыл бұрын
Hey, I have a question about 5:15 I bought a Hyperx Alloy Origins Core (like yours) with aqua switches, and I seem to have the same problem but with my D and G keys instead. Could you tell me how did you "hard reset" it so I could try it aswell? I tried the "blow while clicking method" from a different video but it only fixed the issue for a few hours before my D and G started only registering ~80% of the time again lol (I haven't modded it yet, and it's still ~6 months old) Thanks! (:
@Muzziii
2 жыл бұрын
Hey, I believe it was holding down function and escape for 3 seconds, that should factory reset it. You’ll also lose the color profiles btw
@蛇王-y9b
2 жыл бұрын
but this keyboard main problem is the spring ping , lubing other parts doesn't really help that much
@notjameslee
3 жыл бұрын
Is there a reason why u used grease for the stabilizers and not the lube?
@Muzziii
3 жыл бұрын
Mainly because the lube is a lot more liquid so it'll leak all over the place (I learned from my experience LOL) over time and just make a mess. Also, the lube dried up on the other keyboard I tried it with and the rattle came back in a couple of weeks. If I could take the keyboard apart and lube the stabs separately, then the leaking would not be a real problem and I could apply it more evenly, but the wire that runs through them I think would still benefit from the grease as it has a whole lot more room to move and the lube would just dry up or leak out regardless.
@voqzmk2
3 жыл бұрын
@@Muzziii I used Glorious G-Lube and it also says on their site, that you can use the G-Lube for stabilizers too, I have Glorious Panda Switches and lubed them ~2 Months ago and they still feel great. Dielectric grease is better for the long run, but if you want to save some money, just get a lube like Glorious G-Lube and re-lube the stabilizers every 3-6 Months.
@Cloud3490
2 жыл бұрын
Do you have any recommendations on how I should lube it without over lubing? I tried to lube my other keyboard and I think I over lubed it. What I did was put the super lube on a tray then I dipped the paint brush once per switch and it’s still too much. Do you think I should just put one drop on each switch and spread it out evenly using a paint brush?
@Muzziii
2 жыл бұрын
Yeah, I think the paintbrush method is the most controlled (outside of disassembly and desoldering the board) I would just get very little on the paint brush and maybe wipe it on a clean part of the tray before lubing the switches. Hope this helps! Also check out r/mechanicalkeyboards on Reddit, some great people over there!
@paulepu643
3 жыл бұрын
good vid ! they sound kind of over lubed tho
@peter-tx9kd
3 жыл бұрын
so I have the core aswell but with tactile switches, so will method 2 work but with the dedicated lube for them to not ruin the bump?
@Muzziii
3 жыл бұрын
Based on what I've read lubing tactile switches has its own method and lube as you mentioned, I'd check out r/mechanicalkeyboards on Reddit, those guys are real experts
@_chris5239
3 жыл бұрын
Where’d u get ur plastic tools?
@Muzziii
3 жыл бұрын
I got them as part of ebay spare parts I used to buy, I'm sure you can get similar tools from ifixit, Amazon, or ebay!
@yungfarticus
3 жыл бұрын
spray lubing is not good, It has a very high chance of messing up the contact point on the switch.
@cholosantos781
3 жыл бұрын
how about paint brush method lube(idk name), is it safe?
@yungfarticus
3 жыл бұрын
@@cholosantos781 the only safe way that I personally know of is brush lubing with krytox 205g0 or with the glorious lube
@cholosantos781
3 жыл бұрын
@@yungfarticus welp i have krytox. thank you good sir.
@yungfarticus
3 жыл бұрын
@@cholosantos781 watch yt guides they are very helpful
@qwqhug0o310
3 жыл бұрын
Can the stabilitzers take out?
@Muzziii
3 жыл бұрын
You can, but you would need to desolder the switches first. I've heard the case is really hard to take apart so I didn't bother spending that much time on this board
@shiftadvance
2 жыл бұрын
hey there! this seems like a pretty awesome & safe way of lubing the switch, but for the second method where you use the brush, should i use the super lube or krytox? i want the best results that will last for quite a while and, since i'm lubing browns, i don't want to get the lube onto the stem's legs. thanks in advance! :D
@Muzziii
2 жыл бұрын
Definitely use Krytox, and be careful when lubing browns, I’m sure you don’t want to mess up the tactile feedback
@shiftadvance
2 жыл бұрын
@@Muzziii okay, thanks a lot! you're awesome!
@poparaul6471
2 жыл бұрын
I got one of my backspace stabilizer off is there any way to put it back??
@alioth5867
3 жыл бұрын
TYSM
@Brenster
3 жыл бұрын
I’m using 205g lube from the key company. Can I just use this for the stabilizers to? ( I have the same keyboard) and can the lube break the keyboard?
@vibingcat
2 жыл бұрын
I actually have Aqua switches I don't have the hyperx Cherry switches so I don't know if I should try this with my Aqua switches
@3D_Basescu
3 жыл бұрын
is it really safe to lube your switches like that?
@timetobargeinandgivemyopin7260
3 жыл бұрын
I'm also wondering this
@Muzziii
3 жыл бұрын
Many have advised against this method, which is why I said to try at your own risk (my board is fine even now, I use it pretty regularly) The chance of messing something up is much higher with this method. Overlubing becomes a concern too with this method and my lube did end up leaking out over time creating a mess. I would not do it this was if I had a custom board.
@tristanbugz
3 жыл бұрын
bro u over over lubbed those stabs
@Muzziii
3 жыл бұрын
Yeah the method itself was pretty sketch, I just wanted it to be better than stock, definitely not perfect by any means tho
@Nicklaws46
2 жыл бұрын
What kind of lube is better to use, to lube red xyper x switches, and stabilisers? For example Krytox -"-"-
@Muzziii
2 жыл бұрын
krytox 205g0 is what my research has indicated to be the 'go to' I'd recommend checking out reddit.com/r/mechanicalkeyboards, those guys are way more knowledgeable and experienced
@oc8546
3 жыл бұрын
Thanks! Liked and subbed! keep up the great work
@Muzziii
3 жыл бұрын
Thanks for the support and thanks for watching!
@dmaberlin
10 ай бұрын
how long work your keyboard after Lubing like this?
@syaioo569
3 жыл бұрын
i just ordered krytox lube imma try it out when it arrive
@0iqxylem549
2 жыл бұрын
How did you get your led on that keyboard to do that?
@Muzziii
2 жыл бұрын
I have a video on it on my channel, titled: "Keyboard Lighting Profile" Link to the video: kzitem.info/news/bejne/zqxmv6iofIx1dmk
@ezekiel237
3 жыл бұрын
Doing this is the worst thing you could possibly ever tho to your switches, the drop will directly drop into the bottom hole which when you press the switch it will make the worst sound ever “your switch being overlubed”
@sainseiya0023
3 жыл бұрын
So the inside part of my stabilizer the one that looks like a switch popped and I have no idea on how to get it back in
@Muzziii
3 жыл бұрын
awe man :(, you might need to get a new stab (I don't know the extent of the damage) you might be able to pop the stab back in, try searching here on YT how to take off stabs.
@rykimchi
3 жыл бұрын
btw do you know how to open this up? I'm planning to desolder a broken switch
@Muzziii
3 жыл бұрын
I think one of the other comments had a user explaining how to open it up, the standard screws and then I think there are screws under the rubber pads. But sorry, I'm not 100 % sure :(
@rykimchi
3 жыл бұрын
@@Muzziii its fine I figured it out lol
@okimgonnapullup
3 жыл бұрын
can i ask which is better though method one or two?
@brocky
2 жыл бұрын
Have you ever tried using o-rings to dampen the sound? I'm curious how it sounds on the Hyperx. Debating which o-rings.
@Muzziii
2 жыл бұрын
Yes I have! I didn’t like the feel of the o rings on this board at all, so I ended up taking them off
@zovrc8676
3 жыл бұрын
Hey if i was kinda on a budget or cant really buy online rn whats some lube i can use?
@ROBBER_.
9 күн бұрын
Bro, Using solder the result can be much better.
@arnavsharma440
2 жыл бұрын
U need to add some foam and add mure lube to the stableisers then it will sound magnificent
@Brenster
3 жыл бұрын
Why did you use two lubes
@sydbanal5854
3 жыл бұрын
Can this work on mx blue's? Im just new to mech keyboards sorry
@Muzziii
3 жыл бұрын
No need to apologize, man, I'm still learning too. Don't do this method, you will mess up the blues. There is a way to lube blue switches properly and there's lube out there meant for Blue switches. I'd recommend heading over to reddit.com/r/mechanicalkeyboards that's where I get most of my information from/ask questions
@sydbanal5854
3 жыл бұрын
@@Muzziii thanks my man it really helps!!
@sydbanal5854
3 жыл бұрын
@Vacuum Cleaner damn man thanks for the recom XD
@fazemyra9700
2 жыл бұрын
i spelled coca on my keyboard now it sounds nice
@Brenster
3 жыл бұрын
Why do you use two lines?
@Gljivac69
3 жыл бұрын
Yoo how did you do that colourway for keyboard
@Muzziii
3 жыл бұрын
Yo, I have a video on my channel, I think it’s the second last video I posted called ‘My Keyboard Lighting Profile’
@yeeeooo7955
2 жыл бұрын
the first thing i did when i got this board was change my keycaps the stocks ones were gross
Пікірлер: 286