Amigo 👍 Appreciate it, have adapted same habits, think this is my problem. No for sure my pickup tube is clogged last owner never did anything.
@buttwaggen4201
Жыл бұрын
Very sensible video thank you very much you're very articulate and thorough.
@FalconsGarage
Жыл бұрын
thanks
@kingkevin88888888
13 күн бұрын
Great work
@FalconsGarage
11 күн бұрын
Thank you so much 😀
@alexharper9786
Жыл бұрын
Great video! I’m getting ready to do mine will definitely clamp off the hose even tho I did buy 2 things of coolant Incase and fresh oil of course. I hope mine goes smoothly
@jorgeespinoza1350
4 ай бұрын
How did it go and how much coolant did you have to replace it with? Thinkingvaboit tackleling this myslef
@robertbertram1416
3 ай бұрын
Thank you so very much.
@FalconsGarage
2 ай бұрын
Any time!
@AnythingWeThinkOf
8 ай бұрын
Mint. Great video man. Gotta do this on my 2005 F150 4.6
@A.C.71
5 ай бұрын
Ive seen other videos which showed sometimes the adapter plate gets buggered up and has to be fine sanded in order to seal, so just slipping a new gasket in would actually not work.
@ForestBlue7
7 ай бұрын
Great video man, I’m wondering if it’s essentially the same process for a 2012 ford f150 3.5 ecoboost? Cracked the oil filter adapter when installing new sensor.
@wingwang5058
Жыл бұрын
Are you sure this is navigator 03? Why isn't there a differential under the base? And my '04 has a differential blocking the handling space?
@frankhassett2496
8 ай бұрын
Great video. I have to replace gasket in my Crown Victoria. 4.6 should be same/similar steps, yes?
@Dust4130
Жыл бұрын
Great video!
@FalconsGarage
Жыл бұрын
Thanks!
@Poohdaddymagic
Жыл бұрын
Awesome video my friend 👍
@FalconsGarage
Жыл бұрын
Thank you 👍
@Poohdaddymagic
Жыл бұрын
@@FalconsGarage Was this a 2wd? My truck is 4x4 and it is much harder to see the part
@Drtist1
10 ай бұрын
Great Job, I received a quote for $800 to repair my Jeep Grand Cherokee. Would you say this is accurate???
@jedclampett6466
9 ай бұрын
An absolute nightmare on a four wheel drive
@nickwest5999
7 ай бұрын
Dealing with that right now , can it be done without dropping the diff? Or can you get it with wobble sockets and extension?
@bionicliquid1967
Жыл бұрын
I just can't figure it out. I pinched the radiator hose and to be safe I pinched the hose from the bottle as well. When I pulled the hose off, radiator fluid poured from the housing itself. Just a free flow of gushing radiator fluid until I put the hose back on. I double checked my clamps and tried again and same.
@FalconsGarage
Жыл бұрын
yeah .. but you still have coolant in the block .. so its normal
@A.C.71
6 ай бұрын
Someone told me I have to remove the 4x4 axel ? My is a 2005 f150 5.4 3v 4x4 crewcab..can it be done the way he shows ?
@ethandupit73
6 ай бұрын
Probably can do it without pulling. It will be a pain though. Just did my 2010 f150 5.4 3valve 4×4 and it was tight but manageable
@chompiraz849
11 ай бұрын
The link for the gasket says its currently unavailable but is that one the same one for a 2007 f150 4.6?
@FalconsGarage
11 ай бұрын
i believe so
@lucaspascual7763
Жыл бұрын
Hey man I had a question my brother bought a 2009 dodge hemi motor and wants to put it in his 2006 dodge charger would it work ?
@FalconsGarage
Жыл бұрын
is the charger a hemmi too?
@mrnutz5227
2 ай бұрын
Im about to do mine today but mine is 4x4😮
@ernestrichardson8683
10 ай бұрын
Need models/1999-2000 models. Some have oil cooler and out rig for filter.
@taschror
Жыл бұрын
I have this issue with my 2013 F150, are you located in NJ by chance?
@FalconsGarage
Жыл бұрын
no sorry
@jeremeatz75
Жыл бұрын
Is this the same process for the 6.2L Raptor?
@FalconsGarage
Жыл бұрын
no i believe the oil filter housing is different
@firebug1892
11 ай бұрын
How do you pinch off the hose?
@FalconsGarage
11 ай бұрын
How To Pinch Off Coolant Hoses
@reyrey7405
10 ай бұрын
👍🏻
@dougdoug8636
Жыл бұрын
Soooo much harder on a 4x4!
@FalconsGarage
Жыл бұрын
Very true
@jiwbink
Жыл бұрын
NEW TO YOUR CHANNEL. IM NOT EXACTLY SURE WHICH VEHICLE IS IN THE VIDEO, BUT I AM SURE I WOULD LOVE,LOVE THAT MUCH ROOM AND LINE OF SIGHT FOR THE 05 5.4 F 150 4X4 IM ABOUT TO GET INTO! SMH!! THESE IDIOT-GENEERS!! IT SHOULD BE MANDATORY AT LEAST ONE YEAR TURNING WRENCHES,BEFORE THE FIRST DAY IN ENGINEERING COURSES!! THX FOR THE INFO,LIKE HOW YOU APPROACH THE BOLTING AND U BOL TING!!
@FalconsGarage
Жыл бұрын
that would be amazing . defiantly a pain on a 4x4 car
Пікірлер: 45