How To 𝐒𝐜𝐚𝐧 𝐄𝐮𝐭𝐞𝐥𝐒𝐚𝐭 𝟏𝟔𝐀 16°East On Redline Decoder
To scan Eutelsat 16A at 16° East on a Redline decoder, you need to follow these steps:
1. **Connect and Setup**:
- Ensure your satellite dish is properly aligned to Eutelsat 16A at 16° East.
- Connect your Redline decoder to your TV and satellite dish.
2. **Power On**:
- Turn on your Redline decoder and your TV.
3. **Access the Menu**:
- Using the remote control, press the "Menu" button to access the main menu.
4. **Satellite Settings**:
- Navigate to the “Installation” or “Settings” menu, depending on your decoder model.
- Select “Satellite List” or “Satellite Settings.”
5. **Select Eutelsat 16A**:
- From the list of available satellites, select "Eutelsat 16A" or simply "16° East".
- If Eutelsat 16A is not listed, you may need to add it manually by entering the correct longitude (16° East).
6. **Transponder Settings**:
- Go to “Transponder” or “TP List”.
- Make sure to have the correct frequency, symbol rate, and polarization settings for Eutelsat 16A. Some common transponder settings for Eutelsat 16A are:
- Frequency: Various, e.g., 11054 MHz, 11595 MHz, 11678 MHz, etc.
- Symbol Rate: Typically 30000, 27500, 45000, etc.
- Polarization: Horizontal (H) or Vertical (V).
7. **Scan for Channels**:
- Select “Blind Scan” or “Auto Scan” to search for all available channels on Eutelsat 16A.
- Alternatively, you can do a “Manual Scan” by entering the specific transponder details.
8. **Save Channels**:
- Once the scan is complete, save the found channels.
9. **Exit the Menu**:
- Exit the menu and return to watching TV.
10. *Fine-Tuning* (if necessary):
- If you’re not getting all the channels, you may need to fine-tune your dish alignment or update the transponder list.
Here is a more detailed breakdown of steps for manual transponder entry if needed:
Adding a New Satellite (if not pre-listed):
1. **Go to Satellite List**:
- Select the option to add a new satellite.
2. **Enter Satellite Details**:
- Name: Eutelsat 16A
- Longitude: 16.0° East
3. **Save**:
- Save the new satellite entry.
Adding/Editing Transponder:
1. **Go to TP List**:
- Select the option to add a new transponder.
2. **Enter Transponder Details**:
- Frequency: e.g., 11054 MHz
- Symbol Rate: e.g., 30000
- Polarization: Horizontal (H) or Vertical (V)
3. **Save and Scan**:
- Save the transponder and perform a scan.
Blind Scan:
1. **Select Blind Scan**:
- This option will scan all frequencies and symbol rates for the satellite.
2. **Start Scan**:
- Start the scan and wait for it to complete.
Auto Scan:
1. **Select Auto Scan**:
- This option scans pre-defined transponders for the satellite.
2. **Start Scan**:
- Start the scan and wait for it to complete.
Make sure to regularly update your decoder's firmware for the latest satellite settings and transponder updates.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire
Негізгі бет 💎 How To 𝐒𝐜𝐚𝐧 𝐄𝐮𝐭𝐞𝐥𝐒𝐚𝐭 𝟏𝟔𝐀 16°East On Redline Decoder | Pbteck
No video
Пікірлер: 4