This is a DETAILED video on how to make a very nice 6-Cup Tumbler Turner for the personalized tumbler crafter! The total cost of the materials and supplies (excluding tools) is about $170. I have seen these for sale for upwards of $300 to $400! This is made with a bare minimum of tools, as all my cool-guy woodworking stuff is still in storage 3 states away.
Visit Punkerdoo's Tumblers and Crafts on Facebook to check out what my wifey-poo can make for you!
/ punkerdoostumblersandc...
Materials Needed:
2' x 4' x 1/2" Plywood
8" x 8' x 3/4" Plank
6" x 8' x 3/4" Plank
M4-.70 x 12 Machine Screws (6)
#8-32 x 1-1/2" Machine Screws (6)
#10-24 Wing Nuts (6)
SAE #10 Flat Washers (24)
#4 x 1/2" Wood Screws (12)
#8 x 1-1/2" Wood Screws (16)
Spring Roller Catch (6)
Gray Wire Connector Caps (12)
PVC Pipe Cement
Super Glue
Wood Glue
3/4" Plug (Threaded) 450007 (6)
3/4" Adapter (Slip x Thread) 435007 (12)
1/2" x 3/4" Adapter (Thread x Slip) 436074 (12)
1/2" Adapter (Slip x Thread) 435005 (6)
3/4" Plug (Slip) 449007 (6)
3/4" PVC Pipe, 6" long (6)
1/2" PVC Pipe, 8-1/2" long (12)
Motors:
www.amazon.com...
Some of the Tools You Will Need:
Phillips Screwdriver
PVC Pipe Cutter
Power Drill
1/16", 1/8", 3/16" drill bits
1-1/4" Spade bit
1/2" Countersink bit
Saw
Tape Measure
*Carpenter's Square is a definite bonus!
*Use a Staple Gun to fix the switch cables in place
email: thenephilite@gmail.com
Twitter: @MindDistillery
Minds: @MindDistillery
BitChute: MindDistillery
Support me on Patreon: / minddistillery
Music from www.bensound.com
Негізгі бет HOW TO BUILD a 6-Turner Tumbler Turner for CHEAP
No video
Пікірлер: 26